Try it now Login

UN/EDIFACT D98B DELJIT Message

Review the DELJIT segment sequence, mandatory fields, repeat counts and valid codes for the D98B EDIFACT directory.

What the DELJIT message is for

Delivery Just In Time Message. A short-horizon call-off telling a supplier exactly what to deliver, and often at what hour, against an existing schedule.

DELJIT is the execution layer that sits under DELFOR. Where the schedule says roughly what is needed this month, the JIT call-off says what is needed at a named door, on a named day, sometimes within a named time window. It exists because sequenced manufacturing cannot hold buffer stock: parts arrive shortly before they are consumed on the line. The precision is the point, and so is the tight coupling, since a missed call-off stops production rather than merely delaying an order.

Who exchanges it

Sent by manufacturers running just-in-time or in-sequence production, received by component suppliers delivering to the line. Calls off against a DELFOR schedule. The supplier responds with DESADV covering the actual despatch, and RECADV may confirm receipt.

Segments that carry the parts people get wrong

  • BGMCall-off identifier and function.
  • DTMRequested delivery date and, where used, the time window.
  • LINThe item called off.
  • QTYThe quantity required.
  • SEQSequence information for in-sequence supply, where parts must arrive in build order.
  • LOCThe unloading point, which on a large plant is not the same as the site address.

In practice: LOC matters more than newcomers expect. On a plant with many receiving doors, delivering the right parts to the wrong door has the same effect as not delivering them.

  • In D98B, DELJIT defines 38 segments
  • 16 mandatory
  • Related in D98B: DELFOR, DESADV, RECADV
Jump to Segment
UNH
BGM
DTM
FTX
RFF
DTM
NAD
LOC
FTX
CTA
COM
SEQ
DTM
GIR
LOC
PAC
PCI
GIN
LIN
PIA
IMD
ALI
GIR
TDT
FTX
PAC
DTM
RFF
DTM
LOC
CTA
COM
QTY
SCC
DTM
RFF
DTM
UNT
UNH Unknown Segment (Max 1) Required
BGM To indicate the type and function of a message and to transmit the identifying number. (Max 1) Required
  • C002 – Identification of a type of document/message by code or name. Code preferred.
    • 1001 – Document/message identifier expressed in code.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Certificate providing the values of an analysis.
      • 2 – Certificate certifying the conformity to predefined definitions.
      • 3 – Certificate certifying the quality of goods, services etc.
      • 4 – Report providing the results of a test session.
      • 5 – Report specifying the performance values of products.
      • 6 – Report providing specification values of products.
      • 7 – Reports on events during production process.
      • 8 – Self explanatory.
      • 9 – Self explanatory.
      • 10 – Document/message providing basic data concerning a party.
      • 11 – A pre-approved document relating to federal label approval requirements.
      • 12 – Certificate certifying a specific quality of agricultural products.
      • 13 – Document/message which evidences the transport of goods by post (e.g. mail, parcel, etc.).
      • 14 – Certificate certifying the weight of goods.
      • 15 – Document/message specifying the weight of goods.
      • 16 – Document by means of which the documentary credit applicant specifies the conditions for the certificate and by whom the certificate is to be issued.
      • 17 – Document identifying goods in which the issuing authority expressly certifies that the goods originate in a specific country or part of, or group of countries. It also states the price and/or cost of the goods with the purpose of determining the customs origin.
      • 18 – Specific form of transit declaration issued by the exporter (movement certificate).
      • 19 – Certificate certifying the quantity of goods, services etc.
      • 20 – Usage of QALITY-message.

      Showing 20 of 494 values defined for element 1001 in D98B.

    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 143 values defined for element 1131 in D98B.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 223 values defined for element 3055 in D98B.

    • 1000 – Plain language identifier specifying the function of a document/message.
      Type: an, Max Length: 35
  • C106 – Identification of a document/message by its number and eventually its version or revision.
    • 1004 – Reference number assigned to the document/message by the issuer.
      Type: an, Max Length: 35
    • 1056 – To specify the version number or name of an object.
      Type: an, Max Length: 9
    • 1060 – To specify a revision number.
      Type: an, Max Length: 6
  • 1225 – Code indicating the function of the message.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – Message cancelling a previous transmission for a given transaction.
    • 2 – Message containing items (e.g. line items, goods items, Customs items, equipment items) to be added to a previously sent message.
    • 3 – Message containing items (e.g. line items, goods items, Customs items, equipment items) to be deleted from a previously sent message.
    • 4 – Message containing items (e.g. line items, goods items, Customs items, equipment items) to be changed in a previously sent message.
    • 5 – Message replacing a previous message.
    • 6 – Message confirming the details of a previous transmission where such confirmation is required or recommended under the terms of a trading partner agreement.
    • 7 – The message is a duplicate of a previously generated message.
    • 8 – Description to be provided.
    • 9 – Initial transmission related to a given transaction.
    • 10 – Message whose reference number is not filed.
    • 11 – Message responding to a previous message or document.
    • 12 – Message indicating that the referenced message was received but not yet processed.
    • 13 – Self explanatory.
    • 14 – Self explanatory.
    • 15 – Repeated message transmission for reminding purposes.
    • 16 – Message content is a proposal.
    • 17 – Referenced transaction cancelled, reissued message will follow.
    • 18 – New issue of a previous message (maybe cancelled).
    • 19 – Change information submitted by buyer but initiated by seller.
    • 20 – Message to replace the heading of a previous message.

    Showing 20 of 59 values defined for element 1225 in D98B.

  • 4343 – Code specifying the type of acknowledgment required or transmitted.
    Type: an, Max Length: 3
    Valid Codes:
    • AA – Receiver of the payment message needs to return a debit advice in response to the payment message.
    • AB – Indicates that an acknowledgement relating to receipt of message is required.
    • AC – Acknowledge complete including changes.
    • AD – Acknowledge complete without changes.
    • AF – The sender wishes to receive both a Debit Advice and an acknowledgement of receipt for a payment message.
    • AG – Authentication, by a party, of a document established for him by another party.
    • AI – Acknowledgement of changes only is required.
    • AJ – Indication that the referenced offer or transaction (e.g. cargo booking or quotation request) is being dealt with.
    • AP – Indication that the referenced offer or transaction (e.g., cargo booking or quotation request) has been accepted.
    • AQ – The sender of the message expects a response.
    • AR – Documentary credit collection forwarded directly.
    • AS – The receiver of the message is to acknowledge receipt of the message and sent a credit advice for each credit.
    • CA – Indication that the referenced offer or transaction (e.g., cargo booking or quotation request) has been accepted under conditions indicated in this message.
    • CO – Indication that the message contains the physical measurements on which the charges will be based.
    • NA – Self explanatory.
    • RE – Indication that the referenced offer or transaction (e.g., cargo booking or quotation request) is not accepted.
DTM To specify date, and/or time, or period. (Max 10) Required
  • C507 – Date and/or time, or period relevant to the specified date/time/period type.
    • 2005 – Code giving specific meaning to a date, time or period.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • 2 – Date on which buyer requests goods to be delivered.
      • 3 – [2376] Date when a Commercial Invoice is issued.
      • 4 – [2010] Date when an order is issued.
      • 7 – Date and/or time at which specified event or document becomes effective.
      • 8 – Date/time when the purchase order is received by the seller.
      • 9 – Date/time of processing.
      • 10 – Date on which goods should be shipped or despatched by the supplier.
      • 11 – (2170) Date/time on which the goods are or are expected to be despatched or shipped.
      • 12 – Date by which payment should be made if discount terms are to apply.
      • 13 – Date by which payment must be made.
      • 14 – Date/time when instalments are due.
      • 15 – Date/time when promotion activities begin.
      • 16 – Date/time when promotion activities end.
      • 17 – Date and/or time when the shipper of the goods expects delivery will take place.
      • 18 – Self explanatory.
      • 20 – Date/time when cheque is issued.
      • 21 – Description to be provided.
      • 22 – Date/time when freight bill is issued.
      • 35 – Date/time on which goods or consignment are delivered at their destination.
      • 36 – Date of expiry of the validity of a referenced document, price information or any other referenced data element with a limited validity period.

      Showing 20 of 485 values defined for element 2005 in D98B.

    • 2380 – The value of a date, a date and time, a time or of a period in a specified representation.
      Type: an, Max Length: 35
    • 2379 – Specification of the representation of a date, a date and time or of a period.
      Type: an, Max Length: 3
      Valid Codes:
      • 2 – Calendar date: D = Day; M = Month; Y = Year.
      • 3 – Calendar date: M = Month; D = Day; Y = Year.
      • 101 – Calendar date: Y = Year; M = Month; D = Day.
      • 102 – Calendar date: C = Century ; Y = Year ; M = Month ; D = Day.
      • 103 – Calendar week day: Y = Year ; W = Week ; D = Day Week number 01 is always first week of January Day number 1 is always Monday.
      • 105 – Calendar day: Y = Year ; D = Day January the first = Day 001 Always start numbering the days of the year from January 1st through December 31st.
      • 106 – Day of a month: M = Month; D = Day.
      • 107 – Day's number within a specific year: D = Day.
      • 108 – Week's number within a specific year: W = Week.
      • 109 – Month's number within a specific year: M = Month.
      • 110 – Day's number within is a specific month: D = Day.
      • 201 – Calendar date including time without seconds: Y = Year; M = Month; D = Day; H = Hour; M = Minute.
      • 202 – Calendar date including time with seconds: Y = Year; M = Month; D = Day; H = Hour; m = Minutes = Seconds.
      • 203 – Calendar date including time with minutes: C=Century; Y=Year; M=Month; D=Day; H=Hour; M=Minutes.
      • 204 – Calendar date including time with seconds: C=Century;Y=Year; M=Month;D=Day;H=Hour;M=Minute;S=Second.
      • 301 – See 201 + Z = Time zone.
      • 302 – See 202 + Z = Time zone.
      • 303 – See 203 plus Z=Time zone.
      • 304 – See 204 plus Z=Time zone.
      • 305 – Month, day, hours, minutes; M = Month; D = Day; H = Hour; M = Minute.

      Showing 20 of 71 values defined for element 2379 in D98B.

FTX To provide free form or coded text information. (Max 5)
  • C107 – Coded reference to a standard text and its source.
    • 4441 – Free text in coded form.
      Type: an, Max Length: 17 (Required)
    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 143 values defined for element 1131 in D98B.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 223 values defined for element 3055 in D98B.

  • C108 – Free text; one to five lines.
    • 4440 – Free text field available to the message sender for information.
      Type: an, Max Length: 70 (Required)
    • 4440 – Free text field available to the message sender for information.
      Type: an, Max Length: 70
    • 4440 – Free text field available to the message sender for information.
      Type: an, Max Length: 70
    • 4440 – Free text field available to the message sender for information.
      Type: an, Max Length: 70
    • 4440 – Free text field available to the message sender for information.
      Type: an, Max Length: 70
  • 4451 – Code specifying subject of a free text.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • AAA – [7002] Plain language description of the nature of the goods sufficient to identify them at the level required for banking, Customs, statistical or transport purposes, avoiding unnecessary detail (Generic term).
    • AAB – [4276] Conditions of payment between the parties to a transaction (generic term).
    • AAC – Additional information concerning dangerous goods.
    • AAD – Proper shipping name, supplemented as necessary with the correct technical name, by which a dangerous substance or article may be correctly identified or which is sufficiently informative to permit identification by reference to generally available literature.
    • AAE – The content of an acknowledgement.
    • AAF – Specific details applying to rates.
    • AAG – Indicates that the segment contains instructions to be passed on to the identified party.
    • AAH – [4034] Information entered by Customs on the CIM.
    • AAI – Self explanatory.
    • AAJ – Additional conditions specific to this order or project.
    • AAK – Information on the price conditions that are expected or given.
    • AAL – Expression of a number in characters as length of ten meters.
    • AAM – Technical or commercial reasons why a piece of equipment may not be re-used after the current transport terminates.
    • AAN – Restrictions in handling depending on the technical characteristics of the piece of equipment or on the nature of the goods.
    • AAO – Error described by a free text.
    • AAP – Free text of the response to a communication.
    • AAQ – Self explanatory.
    • AAR – (4053) Free text of the non Incoterms terms of delivery. For Incoterms, use: 4053.
    • AAS – Self explanatory.
    • AAT – Free text information on an IATA Air Waybill to indicate means by which account is to be settled.

    Showing 20 of 224 values defined for element 4451 in D98B.

  • 4453 – Code specifying the purpose of the text.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – The occurrence of this text does not affect message processing.
    • 2 – Text description of a coded data item for which there is no currently available code.
    • 3 – Text must be read before actioning message.
    • 4 – Pass text on to later recipient.
    • 5 – Indicates that the text is to be taken as a header.
    • 6 – Indicates that the text starts a new numbered paragraph.
    • 7 – Indicates that the text is a paragraph.
  • 3453 – Code of language (ISO 639-1988).
    Type: an, Max Length: 3
  • 4447 – Code specifying the formatting parameters for the text.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – The associated text is centred in the available space.
    • 2 – The associated text item is aligned flush left in the available space.
    • 3 – The associated text is aligned flush right in the available space.
    • 4 – The associated text is justified in the available space.
    • 5 – The text is to be preceded by one blank line.
    • 6 – The text is to be preceded by two blank lines.
    • 7 – The text is to be preceded by three blank lines.
    • 8 – The text is a continuation of preceding text.
    • 9 – The text is to begin on a new page.
    • 10 – The text is the final section of the preceding text.
    • 11 – The text is to begin a new line.
Group SG1 (Max 10)
RFF To specify a reference. (Max 1) Required
  • C506 – Identification of a reference.
    • 1153 – Code giving specific meaning to a reference segment or a reference number.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • AAA – [1018] Reference number assigned by the seller to his acknowledgement of an order.
      • AAB – [1088] Reference number assigned by the seller to a Proforma Invoice.
      • AAC – [1172] Reference number assigned by issuing bank to a Documentary credit.
      • AAD – [1318] Reference number assigned by the issuer to a Contract Addendum.
      • AAE – Reference number assigned to a goods declaration.
      • AAG – Reference number assigned by issuing party to an offer.
      • AAJ – Reference number assigned by issuer to a delivery order.
      • AAK – Reference number assigned by issuing party to a despatch advice.
      • AAL – Reference number identifying a specific product drawing.
      • AAM – Reference number assigned to a waybill, see: 1001 = 700.
      • AAN – Reference number assigned by buyer to a delivery schedule.
      • AAO – [1362] Reference assigned by the consignee to a shipment.
      • AAP – [1310] Reference to a specific consignment forming part of a contract allowing part deliveries.
      • AAQ – [8260] Marks (letters and/or numbers) which identify a unit load device e.g. freight container.
      • AAS – [1188] Reference assigned by the carrier or his agent to the transport document.
      • AAT – Identifies the master label number of any package type.
      • AAU – [1128] Reference number assigned by the seller to a Despatch Note.
      • AAV – Reference number assigned to an enquiry.
      • AAY – Reference number assigned by the carriers agent to a transaction.
      • AAZ – For maritime shipments, this code qualifies a Standard Alpha Carrier Code (SCAC) as issued by the United Stated National Motor Traffic Association Inc.

      Showing 20 of 618 values defined for element 1153 in D98B.

    • 1154 – Identification number the nature and function of which can be qualified by an entry in data element 1153 Reference qualifier.
      Type: an, Max Length: 35
    • 1156 – Number of the line in the document/message referenced in 1154 Reference number.
      Type: an, Max Length: 6
    • 4000 – To uniquely identify a reference by its version number.
      Type: an, Max Length: 35
    • 1060 – To specify a revision number.
      Type: an, Max Length: 6
DTM To specify date, and/or time, or period. (Max 1)

Elements and codes as defined at DTM above.

Group SG2 (Max 20)
NAD To specify the name/address and their related function, either by CO82 only and/or unstructured by CO58 or structured by CO80 thru 3207. (Max 1) Required
  • C082 – Identification of a transaction party by code.
    • 3039 – Code identifying a party involved in a transaction.
      Type: an, Max Length: 35 (Required)
    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 143 values defined for element 1131 in D98B.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 223 values defined for element 3055 in D98B.

  • C058 – Unstructured name and address: one to five lines.
    • 3124 – Free form name and address description.
      Type: an, Max Length: 35 (Required)
    • 3124 – Free form name and address description.
      Type: an, Max Length: 35
    • 3124 – Free form name and address description.
      Type: an, Max Length: 35
    • 3124 – Free form name and address description.
      Type: an, Max Length: 35
    • 3124 – Free form name and address description.
      Type: an, Max Length: 35
  • C080 – Identification of a transaction party by name, one to five lines. Party name may be formatted.
    • 3036 – Name of a party involved in a transaction.
      Type: an, Max Length: 35 (Required)
    • 3036 – Name of a party involved in a transaction.
      Type: an, Max Length: 35
    • 3036 – Name of a party involved in a transaction.
      Type: an, Max Length: 35
    • 3036 – Name of a party involved in a transaction.
      Type: an, Max Length: 35
    • 3036 – Name of a party involved in a transaction.
      Type: an, Max Length: 35
    • 3045 – Specification of the representation of a party name.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Name component 1: Family name. Name component 2: Given name or initials. Name component 3: Given name or initials. Name component 4: Maiden name. Name component 5: Title Group of name components transmitted in sequence with name component 1 transmitted first. The maiden name is the family name given at birth of a female. Other names are self-explanatory.
  • C059 – Street address and/or PO Box number in a structured address: one to four lines.
    • 3042 – Street and number in plain language, or Post Office Box No.
      Type: an, Max Length: 35
    • 3042 – Street and number in plain language, or Post Office Box No.
      Type: an, Max Length: 35
    • 3042 – Street and number in plain language, or Post Office Box No.
      Type: an, Max Length: 35
    • 3042 – Street and number in plain language, or Post Office Box No.
      Type: an, Max Length: 35
  • 3035 – Code giving specific meaning to a party.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • AA – Party to be billed in accordance with AAR Accounting rule 11.
    • AB – Third party who arranged the purchase of merchandise on behalf of the actual buyer.
    • AE – Any natural or legal person who makes a declaration to an official body on behalf of another natural or legal person, where legally permitted (CCC).
    • AF – Natural or legal person responsible for the satisfactory performance of a Customs transit operation. Source: CCC.
    • AG – (3196) Party authorized to act on behalf of another party.
    • AH – Agent acting on behalf of the transit principal (CCC).
    • AI – Person who has been chosen for a job.
    • AJ – The party which has issued all mutually agreed codes used in the message.
    • AK – Party to whom acknowledgement should be sent.
    • AL – (3340) Party accepting liability for goods held or moving (e.g. transit) under a Customs authorization and - when applicable - a guarantee.
    • AM – Employee of a company or firm authorized to act on behalf of that company or firm e.g. to make a Customs declaration.
    • AN – Person or company which is authorised by the relevant Customs authority to import goods without payment all taxes or specific taxes at the point of entry into the country.
    • AO – Party account is assigned to.
    • AP – (3352) Party accepting goods, products, services etc.
    • AQ – Person or company approved by the relevant authority in the country to pack and export specific goods under Customs supervision.
    • AR – Exporter authorized/approved by Customs for special Customs procedures e.g. simplified procedure.
    • AS – Identifies the financial institution servicing the account(s).
    • AT – Importer authorized/approved by Customs for special Customs procedures e.g. simplified procedure.
    • AU – Trader authorized/approved by Customs for special transit procedures e.g. simplified procedure.
    • AV – Party that has delegated the authority to take a certain action on behalf of a company or agency.

    Showing 20 of 375 values defined for element 3035 in D98B.

  • 3164 – Name of a city (a town, a village) for addressing purposes.
    Type: an, Max Length: 35
  • 3229 – Identification of the name of sub-entities (state, province) defined by appropriate governmental agencies.
    Type: an, Max Length: 9
  • 3251 – Code defining postal zones or addresses.
    Type: an, Max Length: 9
  • 3207 – Identification of the name of a country or other geographical entity as specified in ISO 3166.
    Type: an, Max Length: 3
LOC To identify a place or a location and/or related locations. (Max 10)
  • C517 – Identification of a location by code or name.
    • 3225 – Identification of the name of place/location, other than 3164 City name.
      Type: an, Max Length: 25
    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 143 values defined for element 1131 in D98B.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 223 values defined for element 3055 in D98B.

    • 3224 – Name of place/location, other than 3164 City name.
      Type: an, Max Length: 70
  • C519 – Identification the first related location by code or name.
    • 3223 – Specification of the first related place/location by code.
      Type: an, Max Length: 25
    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 143 values defined for element 1131 in D98B.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 223 values defined for element 3055 in D98B.

    • 3222 – Specification of the first related place/location by name.
      Type: an, Max Length: 70
  • C553 – Identification of second related location by code or name.
    • 3233 – Specification of a second related place/location by code.
      Type: an, Max Length: 25
    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 143 values defined for element 1131 in D98B.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 223 values defined for element 3055 in D98B.

    • 3232 – Specification of a second related place/location by name.
      Type: an, Max Length: 70
  • 3227 – Code identifying the function of a location.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • 1 – (3018) Point or port of departure, shipment or destination, as required under the applicable terms of delivery, e.g. Incoterms.
    • 2 – Place where funds are to be, or have been made available to the creditor.
    • 4 – Place at which the goods have been received.
    • 5 – (3214) Port, airport or other location from which a means of transport is scheduled to depart or has departed.
    • 7 – (3246) Place to which the goods are to be finally delivered under transport contract terms (operational term).
    • 8 – Port, airport or other location to which a means of transport is destined.
    • 9 – (3334 + 3230) Seaport, airport, freight terminal, rail station or other place at which the goods (cargo) are loaded on to the means of transport being used for their carriage.
    • 10 – (3348) Place at which the goods are taken over by the carrier.
    • 11 – (3392 + 3414) Seaport, airport, freight terminal, rail station or other place at which the goods (cargo) are unloaded from the means of transport having been used for their carriage.
    • 12 – Port at which the goods are discharged from the vessel used for their transport.
    • 13 – (3424) Place where goods are transferred from one means of transport to another (operational term).
    • 14 – (3384) Place where goods are located and where they are available for examination.
    • 15 – Place where the responsibility is transferred.
    • 16 – Place where the ownership of the goods is transferred.
    • 17 – Place where goods are transported across a country border.
    • 18 – (3156) Warehouse where a particular consignment has been stored.
    • 19 – Factory/plant relevant for a particular consignment.
    • 20 – Place where goods will ultimately be delivered.
    • 21 – Place of departure, shipment or destination as specified in the terms of sale agreed between the parties.
    • 22 – (3080) Place where Customs clearance procedure occur (CCC).

    Showing 20 of 179 values defined for element 3227 in D98B.

  • 5479 – To specify the relationship between two or more items.
    Type: an, Max Length: 3
FTX To provide free form or coded text information. (Max 5)

Elements and codes as defined at FTX above.

Group SG3 (Max 5)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
  • C056 – Code and/or name of a department or employee. Code preferred.
    • 3413 – Internal identification code.
      Type: an, Max Length: 17
    • 3412 – The department or person within an organizational entity.
      Type: an, Max Length: 35
  • 3139 – Code specifying the function of a contact (e.g. department or person).
    Type: an, Max Length: 3
    Valid Codes:
    • AA – Department/person to contact for matters regarding insurance.
    • AB – Department/person to contact for matters regarding the workshop.
    • AC – Department/person in charge of accepting incoming goods.
    • AD – The contact responsible for accounting matters.
    • AE – Department/person to contact for matters regarding contracts.
    • AF – Department/person to contact for matters regarding land registry.
    • AG – Department/person of the agent which acts on behalf of another party.
    • AH – Department/person to contact for matters regarding technical coordination of works.
    • AI – Department/person to contact for matters regarding project management on behalf of the contractor.
    • AJ – Department/person to contact for matters regarding investments.
    • AK – Department/person to contact for matters regarding management of works on behalf of the owner.
    • AL – Department/person to contact for matters regarding personnel (human resources).
    • AM – Department/person to contact for matters regarding claims.
    • AN – Department/person to contact for laboratory matters.
    • AO – Department/person to contact for matters regarding plant/equipment.
    • AP – Department/person responsible for the accounts payable function within a corporation.
    • AQ – Department/person to contact for matters regarding quantity surveying.
    • AR – Department/person responsible for the accounts receivable within a corporation.
    • AS – Department/person to contact for matters regarding public relations.
    • AT – Department/person to contact for matters regarding technical issues.

    Showing 20 of 89 values defined for element 3139 in D98B.

COM To identify a communication number of a department or a person to whom communication should be directed. (Max 5)
  • C076 – Communication number of a department or employee in a specified channel.
    • 3148 – The communication number.
      Type: an, Max Length: 512 (Required)
    • 3155 – Code identifying the type of communication channel being used.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • AA – A process that, on demand, connects two or more data terminal equipments and permits the exclusive use of a data circuit between them until the connection is released (ISO).
      • AB – Communications number assigned by Societe Internationale de Telecommunications Aeronautiques (SITA).
      • AC – Communications number assigned by Aeronautical Radio Inc.
      • AD – AT&T mailbox identifier.
      • AE – Peripheral device identification.
      • AF – The switched telecommunications network of the United States Department of Defense.
      • AG – The switched telecommunications network of the United States government.
      • AH – Data exchange via the World Wide Web.
      • CA – Self explanatory.
      • EI – Number identifying the service and service user.
      • EM – Exchange of mail by electronic means.
      • EX – Telephone extension.
      • FT – According to ISO.
      • FX – Device used for transmitting and reproducing fixed graphic material (as printing) by means of signals over telephone lines or other electronic transmission media.
      • GM – Self explanatory.
      • IE – Self explanatory.
      • IM – Internal mail address/number.
      • MA – Postal service document delivery.
      • PB – Self explanatory.
      • PS – The process of routing and transferring data by means of addressed packets so that a channel is occupied only during the transmission; upon completion of the transmission the channel is made available for the transfer of other packets (ISO).

      Showing 20 of 28 values defined for element 3155 in D98B.

Group SG4 (Max 9999) Required
SEQ To provide details relating to the sequence. (Max 1) Required
  • C286 – Identification of a sequence and source for sequencing.
    • 1050 – Number indicating the position in a sequence.
      Type: an, Max Length: 10 (Required)
    • 1159 – Specification of the source for a specified sequence number in a coded form.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Report from workstation 1.
      • 2 – Report from workstation 2.
      • 3 – The manufacturer's plant requesting the delivery of the item has allocated the sequence number.
      • 4 – The plant requesting the delivery of an item assigns a number indicating the sequence of the finished article.
      • 5 – The positional sequence when transmitted.
      • 6 – The positional sequence in a message structure as published in a particular UN directory.
    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 143 values defined for element 1131 in D98B.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 223 values defined for element 3055 in D98B.

  • 1229 – Code specifying the action to be taken or already taken.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – This line item is added to the referenced message.
    • 2 – This line item is deleted from the referenced message.
    • 3 – This line item is changed in the referenced message.
    • 4 – This line item is not affected by the actual message.
    • 5 – This line item is entirely accepted by the seller.
    • 6 – This line item is accepted but amended by the seller.
    • 7 – This line item is not accepted by the seller.
    • 8 – Self explanatory.
    • 9 – Self explanatory.
    • 10 – This line item is not found in the referenced message.
    • 11 – This line is not amended by the buyer.
    • 12 – Self explanatory.
    • 13 – Buyer has deducted amount from payment.
    • 14 – Buyer has a claim against an outstanding invoice.
    • 15 – Factor has been requested to charge back the outstanding item.
    • 16 – Seller agrees to issue a credit note.
    • 17 – New settlement terms have been agreed.
    • 18 – Factor agrees to abide by the outcome of negotiations between seller and buyer.
    • 19 – Seller does not accept validity of dispute.
    • 20 – The reported situation is settled.

    Showing 20 of 44 values defined for element 1229 in D98B.

DTM To specify date, and/or time, or period. (Max 5)

Elements and codes as defined at DTM above.

GIR To specify a related set of identification numbers. (Max 99)
  • C206 – The identification of an object.
    • 7402 – The number given to an object for its unique identification.
      Type: an, Max Length: 35 (Required)
    • 7405 – Code specifying the type/source of identity number.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – A number that is used to identify goods from a freight forwarder/consolidator.
      • AB – The first element in a series of elements that together define the structure of an object.
      • AC – The second element in a series of elements that together define the structure of an object.
      • AD – The third element in a series of elements that together define the structure of an object.
      • AE – The fourth element in a series of elements that together define the structure of an object.
      • AF – The fifth element in a series of elements that together define the structure of an object.
      • AG – The sixth element in a series of elements that together define the structure of an object.
      • AH – The seventh element in a series of elements that together define the structure of an object.
      • AI – The eighth element in a series of elements that together define the structure of an object.
      • AJ – The ninth element in a series of elements that together define the structure of an object.
      • AK – The identity of a data set.
      • AL – Reference number assigned by a consignee to a Kanban card.
      • AM – Level number in a hierarchy or other structure.
      • AN – A unique number identifying a particular assembly or other manufacturing process.
      • AO – A number to identify the position within a package according to agreed rules between partners.
      • AP – A name or number which identifies a product.
      • AQ – Number assigned to a release.
      • AR – Statistical concept.
      • AS – A table of items e.g. figures and text represented in rows and columns.
      • AT – Number identifying a group of articles in a predescribed unit load for shipment/dispatch as agreed between partners.

      Showing 20 of 62 values defined for element 7405 in D98B.

  • C206 – The identification of an object.
    • 7402 – The number given to an object for its unique identification.
      Type: an, Max Length: 35 (Required)
    • 7405 – Code specifying the type/source of identity number.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – A number that is used to identify goods from a freight forwarder/consolidator.
      • AB – The first element in a series of elements that together define the structure of an object.
      • AC – The second element in a series of elements that together define the structure of an object.
      • AD – The third element in a series of elements that together define the structure of an object.
      • AE – The fourth element in a series of elements that together define the structure of an object.
      • AF – The fifth element in a series of elements that together define the structure of an object.
      • AG – The sixth element in a series of elements that together define the structure of an object.
      • AH – The seventh element in a series of elements that together define the structure of an object.
      • AI – The eighth element in a series of elements that together define the structure of an object.
      • AJ – The ninth element in a series of elements that together define the structure of an object.
      • AK – The identity of a data set.
      • AL – Reference number assigned by a consignee to a Kanban card.
      • AM – Level number in a hierarchy or other structure.
      • AN – A unique number identifying a particular assembly or other manufacturing process.
      • AO – A number to identify the position within a package according to agreed rules between partners.
      • AP – A name or number which identifies a product.
      • AQ – Number assigned to a release.
      • AR – Statistical concept.
      • AS – A table of items e.g. figures and text represented in rows and columns.
      • AT – Number identifying a group of articles in a predescribed unit load for shipment/dispatch as agreed between partners.

      Showing 20 of 62 values defined for element 7405 in D98B.

  • C206 – The identification of an object.
    • 7402 – The number given to an object for its unique identification.
      Type: an, Max Length: 35 (Required)
    • 7405 – Code specifying the type/source of identity number.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – A number that is used to identify goods from a freight forwarder/consolidator.
      • AB – The first element in a series of elements that together define the structure of an object.
      • AC – The second element in a series of elements that together define the structure of an object.
      • AD – The third element in a series of elements that together define the structure of an object.
      • AE – The fourth element in a series of elements that together define the structure of an object.
      • AF – The fifth element in a series of elements that together define the structure of an object.
      • AG – The sixth element in a series of elements that together define the structure of an object.
      • AH – The seventh element in a series of elements that together define the structure of an object.
      • AI – The eighth element in a series of elements that together define the structure of an object.
      • AJ – The ninth element in a series of elements that together define the structure of an object.
      • AK – The identity of a data set.
      • AL – Reference number assigned by a consignee to a Kanban card.
      • AM – Level number in a hierarchy or other structure.
      • AN – A unique number identifying a particular assembly or other manufacturing process.
      • AO – A number to identify the position within a package according to agreed rules between partners.
      • AP – A name or number which identifies a product.
      • AQ – Number assigned to a release.
      • AR – Statistical concept.
      • AS – A table of items e.g. figures and text represented in rows and columns.
      • AT – Number identifying a group of articles in a predescribed unit load for shipment/dispatch as agreed between partners.

      Showing 20 of 62 values defined for element 7405 in D98B.

  • C206 – The identification of an object.
    • 7402 – The number given to an object for its unique identification.
      Type: an, Max Length: 35 (Required)
    • 7405 – Code specifying the type/source of identity number.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – A number that is used to identify goods from a freight forwarder/consolidator.
      • AB – The first element in a series of elements that together define the structure of an object.
      • AC – The second element in a series of elements that together define the structure of an object.
      • AD – The third element in a series of elements that together define the structure of an object.
      • AE – The fourth element in a series of elements that together define the structure of an object.
      • AF – The fifth element in a series of elements that together define the structure of an object.
      • AG – The sixth element in a series of elements that together define the structure of an object.
      • AH – The seventh element in a series of elements that together define the structure of an object.
      • AI – The eighth element in a series of elements that together define the structure of an object.
      • AJ – The ninth element in a series of elements that together define the structure of an object.
      • AK – The identity of a data set.
      • AL – Reference number assigned by a consignee to a Kanban card.
      • AM – Level number in a hierarchy or other structure.
      • AN – A unique number identifying a particular assembly or other manufacturing process.
      • AO – A number to identify the position within a package according to agreed rules between partners.
      • AP – A name or number which identifies a product.
      • AQ – Number assigned to a release.
      • AR – Statistical concept.
      • AS – A table of items e.g. figures and text represented in rows and columns.
      • AT – Number identifying a group of articles in a predescribed unit load for shipment/dispatch as agreed between partners.

      Showing 20 of 62 values defined for element 7405 in D98B.

  • C206 – The identification of an object.
    • 7402 – The number given to an object for its unique identification.
      Type: an, Max Length: 35 (Required)
    • 7405 – Code specifying the type/source of identity number.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – A number that is used to identify goods from a freight forwarder/consolidator.
      • AB – The first element in a series of elements that together define the structure of an object.
      • AC – The second element in a series of elements that together define the structure of an object.
      • AD – The third element in a series of elements that together define the structure of an object.
      • AE – The fourth element in a series of elements that together define the structure of an object.
      • AF – The fifth element in a series of elements that together define the structure of an object.
      • AG – The sixth element in a series of elements that together define the structure of an object.
      • AH – The seventh element in a series of elements that together define the structure of an object.
      • AI – The eighth element in a series of elements that together define the structure of an object.
      • AJ – The ninth element in a series of elements that together define the structure of an object.
      • AK – The identity of a data set.
      • AL – Reference number assigned by a consignee to a Kanban card.
      • AM – Level number in a hierarchy or other structure.
      • AN – A unique number identifying a particular assembly or other manufacturing process.
      • AO – A number to identify the position within a package according to agreed rules between partners.
      • AP – A name or number which identifies a product.
      • AQ – Number assigned to a release.
      • AR – Statistical concept.
      • AS – A table of items e.g. figures and text represented in rows and columns.
      • AT – Number identifying a group of articles in a predescribed unit load for shipment/dispatch as agreed between partners.

      Showing 20 of 62 values defined for element 7405 in D98B.

  • 7297 – Identification of the type of set.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • 1 – Self explanatory.
    • 2 – Description to be provided.
    • 3 – Related numbers identifying a package such as a bar code label number related to a kanban card number, etc.
    • 4 – A code which indicates that the identities which follow are related to a particular vehicle which may have been previously identified.
    • 5 – The source database of the data in a data set.
    • 6 – The target database for the data in a data set.
    • 7 – A coded or non coded list of values.
    • 8 – The contract related item numbers.
    • 9 – Financial security identifier set.
    • 10 – A code to identify a set of numbers used for accounting.
    • 11 – A set of numbers to identify a project.
    • 12 – A set of numbers to identify a plan of work.
    • 13 – A set of numbers to identify a schedule of work.
    • 14 – A set of numbers to identify a resource.
    • 15 – A set of numbers to identify a milestone event.
    • 16 – A set of numbers to identify an interface work task.
    • 17 – A set of numbers to identify a work task constraint.
    • 18 – Position number(s) of a data structure's relevant components.
LOC To identify a place or a location and/or related locations. (Max 5)

Elements and codes as defined at LOC above.

Group SG5 (Max 5)
PAC To describe the number and type of packages/physical units. (Max 1) Required
  • C531 – Packaging level and details, terms and conditions.
    • 7075 – Indication of level of packaging specified.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Level of packing, if it exists, that is immediately subordinate to the intermediate packaging level.
      • 2 – Level of packaging, if it exists, that is immediately subordinate to the outer packaging level.
      • 3 – For packed merchandise, outermost level of packaging for a shipment.
      • 4 – There is no specifiable level of packaging: packaging is inner and outer level as well.
    • 7233 – Code giving packaging, handling and marking related information.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – The ingredients of the product are not marked on the packaging of the product.
      • 2 – The product price is not marked on the packaging of the product.
      • 3 – The product best before date is not marked on the packaging of the product.
      • 4 – Package is not marked as recyclable.
      • 31 – Package is marked with the product best before date.
      • 32 – The package is marked recyclable.
      • 33 – The package is marked returnable.
      • 34 – Self explanatory.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Self explanatory.
      • 38 – Description to be provided.
      • 39 – Description to be provided.
      • 40 – Description to be provided.
      • 41 – Description to be provided.
      • 42 – Description to be provided.
      • 43 – Descriptions to be provided.
      • 44 – Description to be provided.
      • 45 – Self explanatory.
      • 50 – The package is barcoded with EAN-13 or EAN-8 code.

      Showing 20 of 45 values defined for element 7233 in D98B.

    • 7073 – Code identifying packaging terms and conditions.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Self explanatory.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – Self explanatory.
      • 8 – Self explanatory.
      • 9 – Reusable packaging specifically designed for packaging of the referenced item and owned by the buyer.
      • 10 – Disposable packaging specifically designed for packaging of the referenced item.
      • 11 – Reusable multi-purpose packaging owned by the buyer.
      • 12 – Reusable multi-purpose packaging owned by the seller.
      • 13 – The referenced item is to be supplied without packaging.
      • 14 – Non-standard reusable packaging owned by the seller.
      • 15 – The packaging used must meet durability and handling characteristics required for item export.
      • 16 – The packaging used must meet durability and handling characteristics required for domestic usage.
      • 17 – The cost of packaging is included in the item price.
      • 18 – The cost of packaging is shared equally between the buyer and seller.
      • 19 – The packaging cost will be invoiced on a separate message or document.
      • 20 – The packaging is free of charge.

      Showing 20 of 26 values defined for element 7073 in D98B.

  • C202 – Type of package by name or by code from a specified source.
    • 7065 – Coded description of the form in which goods are presented.
      Type: an, Max Length: 17
    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 143 values defined for element 1131 in D98B.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 223 values defined for element 3055 in D98B.

    • 7064 – Description of the form in which goods are presented.
      Type: an, Max Length: 35
  • C402 – Identification of the form in which goods are described.
    • 7077 – Code indicating the format of a description.
      Type: an, Max Length: 3
      Valid Codes:
      • A – Long description of an item in free form.
      • B – Self explanatory.
      • C – Self explanatory.
      • D – Price look-up description of a product for point of sale receipts.
      • E – Short description of an item in free form.
      • F – Self explanatory.
      • S – Self explanatory.
      • X – Self explanatory.
    • 7064 – Description of the form in which goods are presented.
      Type: an, Max Length: 35 (Required)
    • 7143 – Identification of the type of item number.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – Number assigned by manufacturer or seller to identify the release of a product.
      • AB – Self explanatory.
      • AC – Article identifier used within health sector to indicate data used conforms to HIBC.
      • AD – Number assigned to a cold roll.
      • AE – Number assigned to a hot roll.
      • AF – Number assigned to a slab, which is produced in a particular production step.
      • AG – A number assigned to indicate a revision of software.
      • AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
      • AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
      • AJ – Number assigned to a sample.
      • AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
      • AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
      • AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
      • AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
      • AO – A code which specifies the codification of the state's labelling requirements.
      • AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
      • AQ – A number identifying a coupon.
      • AR – A number to identify a resource.
      • AS – A number to identify a work task.
      • AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.

      Showing 20 of 92 values defined for element 7143 in D98B.

    • 7064 – Description of the form in which goods are presented.
      Type: an, Max Length: 35
    • 7143 – Identification of the type of item number.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – Number assigned by manufacturer or seller to identify the release of a product.
      • AB – Self explanatory.
      • AC – Article identifier used within health sector to indicate data used conforms to HIBC.
      • AD – Number assigned to a cold roll.
      • AE – Number assigned to a hot roll.
      • AF – Number assigned to a slab, which is produced in a particular production step.
      • AG – A number assigned to indicate a revision of software.
      • AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
      • AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
      • AJ – Number assigned to a sample.
      • AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
      • AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
      • AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
      • AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
      • AO – A code which specifies the codification of the state's labelling requirements.
      • AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
      • AQ – A number identifying a coupon.
      • AR – A number to identify a resource.
      • AS – A number to identify a work task.
      • AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.

      Showing 20 of 92 values defined for element 7143 in D98B.

  • C532 – Indication of responsibility for payment and load contents of returnable packages.
    • 8395 – To indicate responsibility for payment of return freight charges for packaging that is returnable.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Self explanatory.
      • 3 – Self explanatory.
      • ZZZ – Self explanatory.
    • 8393 – To indicate the composition of goods loaded into a returnable package.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Description to be provided.
      • 2 – Description to be provided.
      • 3 – Description to be provided.
      • 4 – Description to be provided.
      • 5 – Description to be provided.
      • 6 – Description to be provided.
      • 7 – Description to be provided.
      • 8 – Description to be provided.
      • 9 – Description to be provided.
      • 10 – Description to be provided.
  • 7224 – Number of individual parts of a shipment either unpacked, or packed in such a way that they cannot be divided without first undoing the packing.
    Type: n, Max Length: 8
Group SG6 (Max 999)
PCI To specify markings and labels on individual packages or physical units. (Max 1) Required
  • C210 – Shipping marks on packages in free text; one to ten lines.
    • 7102 – Marks and numbers identifying individual packages.
      Type: an, Max Length: 35 (Required)
    • 7102 – Marks and numbers identifying individual packages.
      Type: an, Max Length: 35
    • 7102 – Marks and numbers identifying individual packages.
      Type: an, Max Length: 35
    • 7102 – Marks and numbers identifying individual packages.
      Type: an, Max Length: 35
    • 7102 – Marks and numbers identifying individual packages.
      Type: an, Max Length: 35
    • 7102 – Marks and numbers identifying individual packages.
      Type: an, Max Length: 35
    • 7102 – Marks and numbers identifying individual packages.
      Type: an, Max Length: 35
    • 7102 – Marks and numbers identifying individual packages.
      Type: an, Max Length: 35
    • 7102 – Marks and numbers identifying individual packages.
      Type: an, Max Length: 35
    • 7102 – Marks and numbers identifying individual packages.
      Type: an, Max Length: 35
  • C827 – Specification of the type of marking that reflects the method that was used and the conventions adhered to for marking (e.g. of packages).
    • 7511 – To specify the type of marking that reflects the method and the conventions adhered to for marking.
      Type: an, Max Length: 3
    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 143 values defined for element 1131 in D98B.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 223 values defined for element 3055 in D98B.

  • 4233 – Code indicating instructions on how specified packages or physical units should be marked.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – Self explanatory.
    • 2 – Self explanatory.
    • 3 – Self explanatory.
    • 4 – Self explanatory.
    • 5 – Self explanatory.
    • 6 – Self explanatory.
    • 7 – Self explanatory.
    • 8 – Self explanatory.
    • 9 – Self explanatory.
    • 10 – Self explanatory.
    • 11 – Self explanatory.
    • 12 – Self explanatory.
    • 13 – Self explanatory.
    • 14 – Self explanatory.
    • 15 – Self explanatory.
    • 16 – Markings as specified by the buyer.
    • 17 – Markings as specified by the seller.
    • 18 – Markings as specified by carrier.
    • 19 – Markings as specified by law.
    • 20 – Markings as specified by industry.

    Showing 20 of 31 values defined for element 4233 in D98B.

  • 8275 – Code to identify whether goods of separate description or comprising separate consignments are contained in the same external packaging or to indicate that a container or similar unit load device is empty.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – Container represents the full consignment of goods declared on a single Customs declaration (i.e. all goods in the container relate to a single Customs declaration).
    • 2 – Container represents part of a consignment declared on a single Customs declaration (i.e. the Customs declaration covers more than one container).
    • 3 – Container holds the full consignment related to the Customs declaration but also holds goods related to other declarations.
    • 4 – Container represents part of the consignment declared on a single Customs declaration with the remainder being in other containers. Other goods, related to other declarations, are also in the container.
    • 5 – Merchandise within a container/package covered by a single invoice.
    • 6 – Merchandise within a container/package covered by more than one invoice.
    • 7 – Container holds no goods.
    • 8 – A container representing a consignment of goods for one consignee with multiple bill of lading numbers.
GIN To give specific identification numbers, either as single numbers or ranges. (Max 10)
  • C208 – Goods item identification numbers, start and end of consecutively numbered range.
    • 7402 – The number given to an object for its unique identification.
      Type: an, Max Length: 35 (Required)
    • 7402 – The number given to an object for its unique identification.
      Type: an, Max Length: 35
  • C208 – Goods item identification numbers, start and end of consecutively numbered range.
    • 7402 – The number given to an object for its unique identification.
      Type: an, Max Length: 35 (Required)
    • 7402 – The number given to an object for its unique identification.
      Type: an, Max Length: 35
  • C208 – Goods item identification numbers, start and end of consecutively numbered range.
    • 7402 – The number given to an object for its unique identification.
      Type: an, Max Length: 35 (Required)
    • 7402 – The number given to an object for its unique identification.
      Type: an, Max Length: 35
  • C208 – Goods item identification numbers, start and end of consecutively numbered range.
    • 7402 – The number given to an object for its unique identification.
      Type: an, Max Length: 35 (Required)
    • 7402 – The number given to an object for its unique identification.
      Type: an, Max Length: 35
  • C208 – Goods item identification numbers, start and end of consecutively numbered range.
    • 7402 – The number given to an object for its unique identification.
      Type: an, Max Length: 35 (Required)
    • 7402 – The number given to an object for its unique identification.
      Type: an, Max Length: 35
  • 7405 – Code specifying the type/source of identity number.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • AA – A number that is used to identify goods from a freight forwarder/consolidator.
    • AB – The first element in a series of elements that together define the structure of an object.
    • AC – The second element in a series of elements that together define the structure of an object.
    • AD – The third element in a series of elements that together define the structure of an object.
    • AE – The fourth element in a series of elements that together define the structure of an object.
    • AF – The fifth element in a series of elements that together define the structure of an object.
    • AG – The sixth element in a series of elements that together define the structure of an object.
    • AH – The seventh element in a series of elements that together define the structure of an object.
    • AI – The eighth element in a series of elements that together define the structure of an object.
    • AJ – The ninth element in a series of elements that together define the structure of an object.
    • AK – The identity of a data set.
    • AL – Reference number assigned by a consignee to a Kanban card.
    • AM – Level number in a hierarchy or other structure.
    • AN – A unique number identifying a particular assembly or other manufacturing process.
    • AO – A number to identify the position within a package according to agreed rules between partners.
    • AP – A name or number which identifies a product.
    • AQ – Number assigned to a release.
    • AR – Statistical concept.
    • AS – A table of items e.g. figures and text represented in rows and columns.
    • AT – Number identifying a group of articles in a predescribed unit load for shipment/dispatch as agreed between partners.

    Showing 20 of 62 values defined for element 7405 in D98B.

Group SG7 (Max 9999)
LIN To identify a line item and configuration. (Max 1) Required
  • C212 – Goods identification for a specified source.
    • 7140 – A number allocated to a group or item.
      Type: an, Max Length: 35
    • 7143 – Identification of the type of item number.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – Number assigned by manufacturer or seller to identify the release of a product.
      • AB – Self explanatory.
      • AC – Article identifier used within health sector to indicate data used conforms to HIBC.
      • AD – Number assigned to a cold roll.
      • AE – Number assigned to a hot roll.
      • AF – Number assigned to a slab, which is produced in a particular production step.
      • AG – A number assigned to indicate a revision of software.
      • AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
      • AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
      • AJ – Number assigned to a sample.
      • AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
      • AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
      • AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
      • AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
      • AO – A code which specifies the codification of the state's labelling requirements.
      • AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
      • AQ – A number identifying a coupon.
      • AR – A number to identify a resource.
      • AS – A number to identify a work task.
      • AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.

      Showing 20 of 92 values defined for element 7143 in D98B.

    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 143 values defined for element 1131 in D98B.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 223 values defined for element 3055 in D98B.

  • C829 – To provide an indication that a segment or segment group is used to contain sub-line or sub-line item information and to optionally enable the sub-line to be identified.
    • 1082 – Serial number designating each separate item within a series of articles.
      Type: an, Max Length: 6
  • 1082 – Serial number designating each separate item within a series of articles.
    Type: an, Max Length: 6
  • 1229 – Code specifying the action to be taken or already taken.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – This line item is added to the referenced message.
    • 2 – This line item is deleted from the referenced message.
    • 3 – This line item is changed in the referenced message.
    • 4 – This line item is not affected by the actual message.
    • 5 – This line item is entirely accepted by the seller.
    • 6 – This line item is accepted but amended by the seller.
    • 7 – This line item is not accepted by the seller.
    • 8 – Self explanatory.
    • 9 – Self explanatory.
    • 10 – This line item is not found in the referenced message.
    • 11 – This line is not amended by the buyer.
    • 12 – Self explanatory.
    • 13 – Buyer has deducted amount from payment.
    • 14 – Buyer has a claim against an outstanding invoice.
    • 15 – Factor has been requested to charge back the outstanding item.
    • 16 – Seller agrees to issue a credit note.
    • 17 – New settlement terms have been agreed.
    • 18 – Factor agrees to abide by the outcome of negotiations between seller and buyer.
    • 19 – Seller does not accept validity of dispute.
    • 20 – The reported situation is settled.

    Showing 20 of 44 values defined for element 1229 in D98B.

  • 1222 – Number indicating the level of an object which is in a hierarchy.
    Type: n, Max Length: 2
  • 7083 – Code indicating the status of the sub-line item in the configuration.
    Type: an, Max Length: 3
    Valid Codes:
    • A – Self explanatory.
    • D – Self explanatory.
    • I – Self explanatory.
PIA To specify additional or substitutional item identification codes. (Max 10)
  • C212 – Goods identification for a specified source.
    • 7140 – A number allocated to a group or item.
      Type: an, Max Length: 35
    • 7143 – Identification of the type of item number.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – Number assigned by manufacturer or seller to identify the release of a product.
      • AB – Self explanatory.
      • AC – Article identifier used within health sector to indicate data used conforms to HIBC.
      • AD – Number assigned to a cold roll.
      • AE – Number assigned to a hot roll.
      • AF – Number assigned to a slab, which is produced in a particular production step.
      • AG – A number assigned to indicate a revision of software.
      • AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
      • AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
      • AJ – Number assigned to a sample.
      • AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
      • AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
      • AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
      • AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
      • AO – A code which specifies the codification of the state's labelling requirements.
      • AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
      • AQ – A number identifying a coupon.
      • AR – A number to identify a resource.
      • AS – A number to identify a work task.
      • AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.

      Showing 20 of 92 values defined for element 7143 in D98B.

    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 143 values defined for element 1131 in D98B.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 223 values defined for element 3055 in D98B.

  • C212 – Goods identification for a specified source.
    • 7140 – A number allocated to a group or item.
      Type: an, Max Length: 35
    • 7143 – Identification of the type of item number.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – Number assigned by manufacturer or seller to identify the release of a product.
      • AB – Self explanatory.
      • AC – Article identifier used within health sector to indicate data used conforms to HIBC.
      • AD – Number assigned to a cold roll.
      • AE – Number assigned to a hot roll.
      • AF – Number assigned to a slab, which is produced in a particular production step.
      • AG – A number assigned to indicate a revision of software.
      • AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
      • AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
      • AJ – Number assigned to a sample.
      • AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
      • AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
      • AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
      • AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
      • AO – A code which specifies the codification of the state's labelling requirements.
      • AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
      • AQ – A number identifying a coupon.
      • AR – A number to identify a resource.
      • AS – A number to identify a work task.
      • AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.

      Showing 20 of 92 values defined for element 7143 in D98B.

    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 143 values defined for element 1131 in D98B.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 223 values defined for element 3055 in D98B.

  • C212 – Goods identification for a specified source.
    • 7140 – A number allocated to a group or item.
      Type: an, Max Length: 35
    • 7143 – Identification of the type of item number.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – Number assigned by manufacturer or seller to identify the release of a product.
      • AB – Self explanatory.
      • AC – Article identifier used within health sector to indicate data used conforms to HIBC.
      • AD – Number assigned to a cold roll.
      • AE – Number assigned to a hot roll.
      • AF – Number assigned to a slab, which is produced in a particular production step.
      • AG – A number assigned to indicate a revision of software.
      • AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
      • AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
      • AJ – Number assigned to a sample.
      • AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
      • AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
      • AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
      • AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
      • AO – A code which specifies the codification of the state's labelling requirements.
      • AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
      • AQ – A number identifying a coupon.
      • AR – A number to identify a resource.
      • AS – A number to identify a work task.
      • AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.

      Showing 20 of 92 values defined for element 7143 in D98B.

    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 143 values defined for element 1131 in D98B.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 223 values defined for element 3055 in D98B.

  • C212 – Goods identification for a specified source.
    • 7140 – A number allocated to a group or item.
      Type: an, Max Length: 35
    • 7143 – Identification of the type of item number.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – Number assigned by manufacturer or seller to identify the release of a product.
      • AB – Self explanatory.
      • AC – Article identifier used within health sector to indicate data used conforms to HIBC.
      • AD – Number assigned to a cold roll.
      • AE – Number assigned to a hot roll.
      • AF – Number assigned to a slab, which is produced in a particular production step.
      • AG – A number assigned to indicate a revision of software.
      • AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
      • AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
      • AJ – Number assigned to a sample.
      • AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
      • AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
      • AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
      • AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
      • AO – A code which specifies the codification of the state's labelling requirements.
      • AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
      • AQ – A number identifying a coupon.
      • AR – A number to identify a resource.
      • AS – A number to identify a work task.
      • AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.

      Showing 20 of 92 values defined for element 7143 in D98B.

    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 143 values defined for element 1131 in D98B.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 223 values defined for element 3055 in D98B.

  • C212 – Goods identification for a specified source.
    • 7140 – A number allocated to a group or item.
      Type: an, Max Length: 35
    • 7143 – Identification of the type of item number.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – Number assigned by manufacturer or seller to identify the release of a product.
      • AB – Self explanatory.
      • AC – Article identifier used within health sector to indicate data used conforms to HIBC.
      • AD – Number assigned to a cold roll.
      • AE – Number assigned to a hot roll.
      • AF – Number assigned to a slab, which is produced in a particular production step.
      • AG – A number assigned to indicate a revision of software.
      • AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
      • AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
      • AJ – Number assigned to a sample.
      • AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
      • AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
      • AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
      • AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
      • AO – A code which specifies the codification of the state's labelling requirements.
      • AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
      • AQ – A number identifying a coupon.
      • AR – A number to identify a resource.
      • AS – A number to identify a work task.
      • AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.

      Showing 20 of 92 values defined for element 7143 in D98B.

    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 143 values defined for element 1131 in D98B.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 223 values defined for element 3055 in D98B.

  • 4347 – Indication of the function of the product code.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • 1 – Information which specifies and qualifies product identifications.
    • 2 – The item number describes the potential substitute product.
    • 3 – The given item number is the number of the product that substitutes another one.
    • 4 – The given item number is the number of the original product substituted by another.
    • 5 – Self explanatory.
    • 6 – Product id of the product that will follow the one currently in production/trade.
    • 7 – Product id of the predecessor of the product currently in production/trade.
    • 8 – The given item number is the expired item number of the product. It has been replaced.
    • 9 – Code indicating the deletion of a secondary identification.
    • 10 – Identification of a defective part.
    • 11 – Identification of a repaired part.
IMD To describe an item in either an industry or free format. (Max 10)
  • C272 – To provide the characteristic of the item being described.
    • 7081 – Code specifying the item characteristic being described.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Product in conformity with specifications.
      • 2 – Description of general product form.
      • 3 – Product without quality control when received.
      • 4 – Description of the finish required/available on the product.
      • 5 – Description of what the end use application of the product will be.
      • 8 – Self explanatory.
      • 9 – Description of a sub-product.
      • 10 – Specifies the direction of the grain of the product.
      • 11 – Item characteristic is described following Customs specifications.
      • 12 – Description of the type and/or process involved in making the product. E.g. in steel, description of the steelmaking process.
      • 13 – Self explanatory.
      • 14 – Description of the surface condition (e.g. roughness) of the product.
      • 15 – Description of any heat treatment or annealing required/performed on the product.
      • 17 – Description of any special coating required/available on the product.
      • 18 – Description of any chemical surface treatment required/performed on the product.
      • 19 – Description of any mechanical surface treatment required/performed on the product.
      • 21 – Description of any forming required/performed on the product.
      • 22 – Description of any special edge treatment required/performed on the product.
      • 23 – Description of any special welds and or splices required/performed on the product.
      • 24 – Security relevant product with special quality control and control documentation prescriptions.

      Showing 20 of 178 values defined for element 7081 in D98B.

    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 143 values defined for element 1131 in D98B.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 223 values defined for element 3055 in D98B.

  • C273 – Description of an item.
    • 7009 – Code from an industry code list which provides specific data about a product characteristic.
      Type: an, Max Length: 17
      Valid Codes:
      • 1 – Displayed text is bold.
      • 2 – Displayed text is dimmed.
      • 3 – Displayed text is italicised.
      • 4 – Displayed text is normal.
      • 5 – Displayed text foreground and background colours are reversed.
    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 143 values defined for element 1131 in D98B.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 223 values defined for element 3055 in D98B.

    • 7008 – Plain language description of articles or products.
      Type: an, Max Length: 256
    • 7008 – Plain language description of articles or products.
      Type: an, Max Length: 256
  • 7077 – Code indicating the format of a description.
    Type: an, Max Length: 3
    Valid Codes:
    • A – Long description of an item in free form.
    • B – Self explanatory.
    • C – Self explanatory.
    • D – Price look-up description of a product for point of sale receipts.
    • E – Short description of an item in free form.
    • F – Self explanatory.
    • S – Self explanatory.
    • X – Self explanatory.
  • 7383 – Code indicating the surface or layer of a product that is being described.
    Type: an, Max Length: 3
    Valid Codes:
    • 1S – Self explanatory.
    • 2S – Self explanatory.
    • AA – To indicate that the entity being specified is on the surface.
    • AB – To indicate that the entity being specified is off the surface.
    • AC – Specifies that the surface/layer/position being described is the soluble portion.
    • AD – The surface or layer of the product being described is the opposite corners.
    • AE – The surface or layer of the product being described are the corner diagonals.
    • BC – Self explanatory.
    • BS – Self explanatory.
    • BT – Self explanatory.
    • DF – Self explanatory.
    • FR – Self explanatory.
    • IN – Self explanatory.
    • LE – Self explanatory.
    • OA – Self explanatory.
    • OS – Self explanatory.
    • OT – Self explanatory.
    • RI – Self explanatory.
    • RR – Self explanatory.
    • ST – Self explanatory.

    Showing 20 of 24 values defined for element 7383 in D98B.

ALI To indicate that special conditions due to the origin, customs preference, fiscal or commercial factors are applicable. (Max 5)
  • 3239 – Country in which the goods have been produced or manufactured, according to criteria laid down for the purposes of application of the Customs tariff, of quantitative restrictions, or of any other measure related to trade.
    Type: an, Max Length: 3
  • 9213 – Identification of the statement of the full/preferential regime according to which duty is assessed.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – Self explanatory.
    • 2 – Self explanatory.
    • 3 – Self explanatory.
    • 8 – Self explanatory.
    • 9 – Self explanatory.
  • 4183 – Indication of a specific condition.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – Item concerned is applicable to national preference calculation.
    • 2 – Item concerned is applicable for settlement/payment discount calculation.
    • 3 – Item concerned is not applicable for settlement/payment discount calculation.
    • 5 – Item concerned is not applicable for bonus calculation.
    • 6 – Item concerned is applicable for bonus calculation.
    • 7 – Item concerned is applicable for commission calculation.
    • 8 – Item concerned is applicable for discount calculation.
    • 9 – Self explanatory.
    • 10 – Item concerned is applicable for the overall settlement discount.
    • 11 – Self explanatory.
    • 12 – Self explanatory.
    • 13 – Self explanatory.
    • 14 – Item concerned is not applicable for commission calculation.
    • 15 – Item concerned is not applicable for discount calculation.
    • 16 – Item concerned is subject to embargo restriction.
    • 17 – Item concerned is not subject to embargo restriction.
    • 18 – Item concerned requires export declaration.
    • 19 – Item concerned does not require export declaration.
    • 20 – Item concerned is liable to import restrictions defined by relevant national authority.
    • 21 – Item concerned is not liable to import restrictions defined by relevant national authority.

    Showing 20 of 143 values defined for element 4183 in D98B.

  • 4183 – Indication of a specific condition.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – Item concerned is applicable to national preference calculation.
    • 2 – Item concerned is applicable for settlement/payment discount calculation.
    • 3 – Item concerned is not applicable for settlement/payment discount calculation.
    • 5 – Item concerned is not applicable for bonus calculation.
    • 6 – Item concerned is applicable for bonus calculation.
    • 7 – Item concerned is applicable for commission calculation.
    • 8 – Item concerned is applicable for discount calculation.
    • 9 – Self explanatory.
    • 10 – Item concerned is applicable for the overall settlement discount.
    • 11 – Self explanatory.
    • 12 – Self explanatory.
    • 13 – Self explanatory.
    • 14 – Item concerned is not applicable for commission calculation.
    • 15 – Item concerned is not applicable for discount calculation.
    • 16 – Item concerned is subject to embargo restriction.
    • 17 – Item concerned is not subject to embargo restriction.
    • 18 – Item concerned requires export declaration.
    • 19 – Item concerned does not require export declaration.
    • 20 – Item concerned is liable to import restrictions defined by relevant national authority.
    • 21 – Item concerned is not liable to import restrictions defined by relevant national authority.

    Showing 20 of 143 values defined for element 4183 in D98B.

  • 4183 – Indication of a specific condition.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – Item concerned is applicable to national preference calculation.
    • 2 – Item concerned is applicable for settlement/payment discount calculation.
    • 3 – Item concerned is not applicable for settlement/payment discount calculation.
    • 5 – Item concerned is not applicable for bonus calculation.
    • 6 – Item concerned is applicable for bonus calculation.
    • 7 – Item concerned is applicable for commission calculation.
    • 8 – Item concerned is applicable for discount calculation.
    • 9 – Self explanatory.
    • 10 – Item concerned is applicable for the overall settlement discount.
    • 11 – Self explanatory.
    • 12 – Self explanatory.
    • 13 – Self explanatory.
    • 14 – Item concerned is not applicable for commission calculation.
    • 15 – Item concerned is not applicable for discount calculation.
    • 16 – Item concerned is subject to embargo restriction.
    • 17 – Item concerned is not subject to embargo restriction.
    • 18 – Item concerned requires export declaration.
    • 19 – Item concerned does not require export declaration.
    • 20 – Item concerned is liable to import restrictions defined by relevant national authority.
    • 21 – Item concerned is not liable to import restrictions defined by relevant national authority.

    Showing 20 of 143 values defined for element 4183 in D98B.

  • 4183 – Indication of a specific condition.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – Item concerned is applicable to national preference calculation.
    • 2 – Item concerned is applicable for settlement/payment discount calculation.
    • 3 – Item concerned is not applicable for settlement/payment discount calculation.
    • 5 – Item concerned is not applicable for bonus calculation.
    • 6 – Item concerned is applicable for bonus calculation.
    • 7 – Item concerned is applicable for commission calculation.
    • 8 – Item concerned is applicable for discount calculation.
    • 9 – Self explanatory.
    • 10 – Item concerned is applicable for the overall settlement discount.
    • 11 – Self explanatory.
    • 12 – Self explanatory.
    • 13 – Self explanatory.
    • 14 – Item concerned is not applicable for commission calculation.
    • 15 – Item concerned is not applicable for discount calculation.
    • 16 – Item concerned is subject to embargo restriction.
    • 17 – Item concerned is not subject to embargo restriction.
    • 18 – Item concerned requires export declaration.
    • 19 – Item concerned does not require export declaration.
    • 20 – Item concerned is liable to import restrictions defined by relevant national authority.
    • 21 – Item concerned is not liable to import restrictions defined by relevant national authority.

    Showing 20 of 143 values defined for element 4183 in D98B.

  • 4183 – Indication of a specific condition.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – Item concerned is applicable to national preference calculation.
    • 2 – Item concerned is applicable for settlement/payment discount calculation.
    • 3 – Item concerned is not applicable for settlement/payment discount calculation.
    • 5 – Item concerned is not applicable for bonus calculation.
    • 6 – Item concerned is applicable for bonus calculation.
    • 7 – Item concerned is applicable for commission calculation.
    • 8 – Item concerned is applicable for discount calculation.
    • 9 – Self explanatory.
    • 10 – Item concerned is applicable for the overall settlement discount.
    • 11 – Self explanatory.
    • 12 – Self explanatory.
    • 13 – Self explanatory.
    • 14 – Item concerned is not applicable for commission calculation.
    • 15 – Item concerned is not applicable for discount calculation.
    • 16 – Item concerned is subject to embargo restriction.
    • 17 – Item concerned is not subject to embargo restriction.
    • 18 – Item concerned requires export declaration.
    • 19 – Item concerned does not require export declaration.
    • 20 – Item concerned is liable to import restrictions defined by relevant national authority.
    • 21 – Item concerned is not liable to import restrictions defined by relevant national authority.

    Showing 20 of 143 values defined for element 4183 in D98B.

GIR To specify a related set of identification numbers. (Max 5)

Elements and codes as defined at GIR above.

TDT To specify the transport details such as mode of transport, means of transport, its conveyance reference number and the identification of the means of transport. The segment may be pointed to by the TPL segment. (Max 5)
  • C220 – Method of transport code or name. Code preferred.
    • 8067 – Coded method of transport used for the carriage of the goods.
      Type: an, Max Length: 3
    • 8066 – Method of transport used for the carriage of the goods.
      Type: an, Max Length: 17
  • C228 – Code and/or name identifying the type of means of transport.
    • 8179 – Code defining the type of the means of transport being utilized.
      Type: an, Max Length: 8
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Self explanatory.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – A caravan towed by a car.
      • 8 – A means of transport indicating a ship carrying containers.
      • 9 – Transport for which common characteristics are not applicable (e.g. big transformers requiring special wagons, special tackles, special routing etc.).
      • 10 – To specify that the means of transportation is a bus.
      • 11 – Self explanatory.
      • 12 – Self explanatory.
      • 13 – Self explanatory.
      • 14 – A means of transport identification code indicating a flatbed trailer.
      • 15 – A means of transport identification code indicating a taxi.
      • 16 – A category of boat used to transport material over water.
      • 17 – The type of means of transport is to be determined by the customer.
      • 18 – The type of means of transport is to be determined by the seller.
      • 19 – A truck capable of tipping up in order to deliver its load.
      • 20 – A truck used explicitly for the conveyance of furniture.

      Showing 20 of 48 values defined for element 8179 in D98B.

    • 8178 – Description of the type of the means of transport being utilized.
      Type: an, Max Length: 17
  • C040 – Identification of a carrier by code and/or by name. Code preferred.
    • 3127 – Identification of party undertaking or arranging transport of goods between named points.
      Type: an, Max Length: 17
    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 143 values defined for element 1131 in D98B.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 223 values defined for element 3055 in D98B.

    • 3128 – Name of party undertaking or arranging transport of goods between named points.
      Type: an, Max Length: 35
  • C401 – To provide details of reason for, and responsibility for, use of transportation other than normally utilized.
    • 8457 – Indication of reason for excess transportation.
      Type: an, Max Length: 3
      Valid Codes:
      • A – Self explanatory.
      • B – Self explanatory.
      • C – Self explanatory.
      • D – Self explanatory.
      • E – Self explanatory.
      • F – Self explanatory.
      • G – Self explanatory.
      • H – Self explanatory.
      • I – Self explanatory.
      • J – Self explanatory.
      • K – Self explanatory.
      • L – Self explanatory.
      • M – Self explanatory.
      • N – Self explanatory.
      • P – Self explanatory.
      • R – Self explanatory.
      • T – Self explanatory.
      • U – Self explanatory.
      • V – Self explanatory.
      • W – Self explanatory.

      Showing 20 of 23 values defined for element 8457 in D98B.

    • 8459 – Indication of responsibility for excess transportation.
      Type: an, Max Length: 3
      Valid Codes:
      • A – Self explanatory.
      • B – Self explanatory.
      • S – Self explanatory.
      • X – Self explanatory.
      • ZZZ – Self explanatory.
    • 7130 – Customer provided authorization number to allow supplier to ship goods under specific freight conditions. This number will be transmitted back to customer in the dispatch advice message.
      Type: an, Max Length: 17
  • C222 – Code and/or name identifying the means of transport.
    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 143 values defined for element 1131 in D98B.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 223 values defined for element 3055 in D98B.

    • 8453 – Coded name of the country in which a means of transport is registered.
      Type: an, Max Length: 3
  • 8051 – Qualifier giving a specific meaning to the transport details.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • 1 – Transport by which goods are moved from or to the frontier, or between inland points.
    • 2 – Point by which the means of transport are presumed to have left the statistical territory of despatch or to have entered the statistical territory of arrival.
    • 10 – Transport by which the goods are moved prior to their main carriage transport.
    • 11 – Transport by which goods are moved to the Customs frontier.
    • 12 – Transport by which goods are moved from the place of departure.
    • 13 – Transport by which goods are moved at the place of destination.
    • 14 – Transport by which the goods are presumed to have left the statistical territory of dispatch or have entered the statistical territory of arrival.
    • 20 – The primary stage in the movement of cargo from the point of origin to the intended destination.
    • 21 – The first carrier of the ordered transport when more than one carrier is involved.
    • 22 – The second carrier of the ordered transport when more than one carrier is involved.
    • 23 – The third carrier of the ordered transport when more than one carrier is involved.
    • 24 – Transport by which goods are moved via an inland body of water.
    • 25 – Carrier responsible from the point of origin to the final delivery destination.
    • 26 – Second transport by which the goods are moved prior to their main carriage transport.
    • 27 – The transport by which the goods are moved to the place of acceptance.
    • 28 – Second transport by which the goods are moved after the main carriage transport.
    • 30 – Transport by which the goods are moved after the main carriage transport.
  • 8028 – Unique reference given by the carrier to a certain journey or departure of a means of transport (generic term).
    Type: an, Max Length: 17
  • 8101 – Identification of the point of origin and point of direction.
    Type: an, Max Length: 3
    Valid Codes:
    • BS – Self explanatory.
    • SB – Self explanatory.
    • SC – Self explanatory.
    • SD – Self explanatory.
    • SF – Self explanatory.
    • SS – Self explanatory.
    • ZZZ – Self explanatory.
  • 8281 – Code indicating the ownership of the means of transport.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – The owner of the transported goods is also the owner of the means of transport or rented it for this transport.
    • 2 – The owner of the transported goods does not own the means of transport or has not rented it for this transport.
    • 3 – A code indicating privately owned transport.
FTX To provide free form or coded text information. (Max 5)

Elements and codes as defined at FTX above.

PAC To describe the number and type of packages/physical units. (Max 5)

Elements and codes as defined at PAC above.

DTM To specify date, and/or time, or period. (Max 5)

Elements and codes as defined at DTM above.

Group SG8 (Max 5)
RFF To specify a reference. (Max 1) Required

Elements and codes as defined at RFF above.

DTM To specify date, and/or time, or period. (Max 1)

Elements and codes as defined at DTM above.

Group SG9 (Max 5)
LOC To identify a place or a location and/or related locations. (Max 1) Required

Elements and codes as defined at LOC above.

Group SG10 (Max 5)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required

Elements and codes as defined at CTA above.

COM To identify a communication number of a department or a person to whom communication should be directed. (Max 5)

Elements and codes as defined at COM above.

Group SG11 (Max 100)
QTY To specify a pertinent quantity. (Max 1) Required
  • C186 – Quantity information in a transaction, qualified when relevant.
    • 6063 – Code giving specific meaning to a quantity.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Quantity relevant for charge.
      • 3 – Self explanatory.
      • 8 – Quantity of goods which the customer requires the supplier to have in inventory and which may be inspected by the customer if desired.
      • 11 – Part of the whole quantity.
      • 12 – Quantity despatched by the seller.
      • 17 – The total quantity of a product on hand at a location. This includes as well units awaiting return to manufacturer, units unavailable due to inspection procedures and undamaged stock available for despatch, resale or use.
      • 18 – Quantity previously referenced.
      • 20 – Self explanatory.
      • 21 – The quantity which has been ordered.
      • 22 – Equivalent quantity at 100% purity.
      • 23 – Quantity at 100% active agent content.
      • 24 – Quantity of goods which the customer requires the supplier to have in inventory but which will not be checked by the customer.
      • 25 – Quantity of retail point of sale activity.
      • 26 – A quantity associated with a promotional event.
      • 27 – Article received which cannot be shipped in its present form.
      • 28 – Quantity of goods or services sold to a military organization.
      • 29 – Sale of product in restaurants or bars.
      • 30 – Sale of product directly to a store.
      • 31 – Self explanatory.

      Showing 20 of 240 values defined for element 6063 in D98B.

    • 6060 – Numeric value of a quantity.
      Type: n, Max Length: 15 (Required)
    • 6411 – Indication of the unit of measurement in which weight (mass), capacity, length, area, volume or other quantity is expressed.
      Type: an, Max Length: 3
SCC To specify scheduling conditions. (Max 1)
  • C329 – Shipment, delivery or production interval pattern and timing.
    • 2015 – Code specifying the days/periods for routine shipments or deliveries.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Self explanatory.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – Self explanatory.
      • 10 – Self explanatory.
      • 11 – Self explanatory.
      • 12 – Self explanatory.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Self explanatory.
      • 18 – Self explanatory.
      • 19 – Self explanatory.
      • 20 – At the earliest date/time within the defined lead time.
      • 21 – Self explanatory.
      • 22 – Self explanatory.

      Showing 20 of 48 values defined for element 2015 in D98B.

    • 2017 – Code specifying the detailed times for routine shipments or deliveries within data element 2015 Despatch pattern, coded.
      Type: an, Max Length: 3
      Valid Codes:
      • A – Self explanatory.
      • B – Self explanatory.
      • C – Self explanatory.
      • D – Ante Meridiem (forenoon).
      • E – Post Meridiem (afternoon).
      • F – Self explanatory.
      • G – The production period that a product will be built such as 1st shift or 3rd shift.
      • H – Self explanatory.
      • Y – Used to cancel or override a previous pattern.
      • ZZZ – Despatch pattern timing according to agreement.
  • 4017 – Code indicating the level of commitment of schedule information.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • 1 – Indicates that the scheduling information is a firm commitment.
    • 2 – Authorizes the supplier to start the manufacturing of goods.
    • 3 – Authorizes the manufacturer to order material required for manufacturing specified goods.
    • 4 – Self explanatory.
    • 5 – Self explanatory.
    • 6 – Capacity is available to meet the requested scheduling demands.
    • 9 – Self explanatory.
    • 10 – Indicates that the scheduling information is for immediate execution.
    • 11 – Description to be provided.
    • 12 – Description to be provided.
    • 13 – Description to be provided.
    • 14 – Description to be provided.
    • 15 – Description to be provided.
    • 16 – Description to be provided.
    • 17 – Description to be provided.
    • 18 – Description to be provided.
    • 19 – Description to be provided.
    • 20 – Description to be provided.
    • 21 – Description to be provided.
    • 22 – Deliver to schedule separately supplied.

    Showing 20 of 24 values defined for element 4017 in D98B.

  • 4493 – Indication of general instructions for delivery.
    Type: an, Max Length: 3
    Valid Codes:
    • AA – A delivery requirement indicating the items should not be shipped without specific authorization.
    • BK – Partial shipping is allowed. The rest of the order should be delivered as soon as possible.
    • CD – An order or the rest of an order should be cancelled if not delivered at specified date.
    • DA – Self explanatory.
    • DB – Self explanatory.
    • DD – An order should be delivered exactly on specified date.
    • IS – A substitute item may be delivered, if the ordered item is not available.
    • P1 – Self explanatory.
    • P2 – The order should be delivered as soon as possible.
    • SC – The order should be delivered only complete, not partial.
    • SF – Partial shipping of an order is allowed, if the total freight rate do not increase.
    • SP – Partial shipping is allowed. The rest of the order should be cancelled.
DTM To specify date, and/or time, or period. (Max 2)

Elements and codes as defined at DTM above.

Group SG12 (Max 5)
RFF To specify a reference. (Max 1) Required

Elements and codes as defined at RFF above.

DTM To specify date, and/or time, or period. (Max 1)

Elements and codes as defined at DTM above.

UNT Unknown Segment (Max 1) Required

Sources and further reading