Try it now Login

UN/EDIFACT D06B DELJIT Message

Review the DELJIT segment sequence, mandatory fields, repeat counts and valid codes for the D06B EDIFACT directory.

What the DELJIT message is for

Delivery Just In Time Message. A short-horizon call-off telling a supplier exactly what to deliver, and often at what hour, against an existing schedule.

DELJIT is the execution layer that sits under DELFOR. Where the schedule says roughly what is needed this month, the JIT call-off says what is needed at a named door, on a named day, sometimes within a named time window. It exists because sequenced manufacturing cannot hold buffer stock: parts arrive shortly before they are consumed on the line. The precision is the point, and so is the tight coupling, since a missed call-off stops production rather than merely delaying an order.

Who exchanges it

Sent by manufacturers running just-in-time or in-sequence production, received by component suppliers delivering to the line. Calls off against a DELFOR schedule. The supplier responds with DESADV covering the actual despatch, and RECADV may confirm receipt.

Segments that carry the parts people get wrong

BGMCall-off identifier and function.
DTMRequested delivery date and, where used, the time window.
LINThe item called off.
QTYThe quantity required.
SEQSequence information for in-sequence supply, where parts must arrive in build order.
LOCThe unloading point, which on a large plant is not the same as the site address.

In practice: LOC matters more than newcomers expect. On a plant with many receiving doors, delivering the right parts to the wrong door has the same effect as not delivering them.

In D06B, DELJIT defines 42 segments
18 mandatory
Related in D06B: DELFOR, DESADV, RECADV

UNH Unknown Segment (Max 1) Required

BGM To indicate the type and function of a message and to transmit the identifying number. (Max 1) Required

C002 – Identification of a type of document/message by code or name. Code preferred.
- 1001 – Code specifying the document name.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Certificate providing the values of an analysis.
  - 2 – Certificate certifying the conformity to predefined definitions.
  - 3 – Certificate certifying the quality of goods, services etc.
  - 4 – Report providing the results of a test session.
  - 5 – Report specifying the performance values of products.
  - 6 – Report providing specification values of products.
  - 7 – Reports on events during production process.
  - 8 – Document/message describes the test report of the first sample.
  - 9 – A document/message to enable the transmission of information regarding pricing and catalogue details for goods and services offered by a seller to a buyer.
  - 10 – Document/message providing basic data concerning a party.
  - 11 – A pre-approved document relating to federal label approval requirements.
  - 12 – Certificate certifying a specific quality of agricultural products.
  - 13 – Document/message which evidences the transport of goods by post (e.g. mail, parcel, etc.).
  - 14 – Certificate certifying the weight of goods.
  - 15 – Document/message specifying the weight of goods.
  - 16 – Document by means of which the documentary credit applicant specifies the conditions for the certificate and by whom the certificate is to be issued.
  - 17 – Document identifying goods in which the issuing authority expressly certifies that the goods originate in a specific country or part of, or group of countries. It also states the price and/or cost of the goods with the purpose of determining the customs origin.
  - 18 – Specific form of transit declaration issued by the exporter (movement certificate).
  - 19 – Certificate certifying the quantity of goods, services etc.
  - 20 – Usage of QALITY-message.
  Showing 20 of 648 values defined for element 1001 in D06B.
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 319 values defined for element 3055 in D06B.
- 1000 – Name of a document.
  Type: an, Max Length: 35
C106 – Identification of a document/message by its number and eventually its version or revision.
- 1004 – To identify a document.
  Type: an, Max Length: 35
- 1056 – To identify a version.
  Type: an, Max Length: 9
- 1060 – To identify a revision.
  Type: an, Max Length: 6
1225 – Code indicating the function of the message.
Type: an, Max Length: 3
Valid Codes:
- 1 – Message cancelling a previous transmission for a given transaction.
- 2 – Message containing items to be added.
- 3 – Message containing items to be deleted.
- 4 – Message containing items to be changed.
- 5 – Message replacing a previous message.
- 6 – Message confirming the details of a previous transmission where such confirmation is required or recommended under the terms of a trading partner agreement.
- 7 – The message is a duplicate of a previously generated message.
- 8 – Code indicating that the referenced message is a status.
- 9 – Initial transmission related to a given transaction.
- 10 – Message whose reference number is not filed.
- 11 – Message responding to a previous message or document.
- 12 – Message indicating that the referenced message was received but not yet processed.
- 13 – Code indicating that the referenced message is a request.
- 14 – Code indicating that the information contained in the message is an advance notification of information to follow.
- 15 – Repeated message transmission for reminding purposes.
- 16 – Message content is a proposal.
- 17 – Referenced transaction cancelled, reissued message will follow.
- 18 – New issue of a previous message (maybe cancelled).
- 19 – Change information submitted by buyer but initiated by seller.
- 20 – Message to replace the heading of a previous message.
Showing 20 of 65 values defined for element 1225 in D06B.
4343 – Code specifying the type of acknowledgment required or transmitted.
Type: an, Max Length: 3
Valid Codes:
- AA – Receiver of the payment message needs to return a debit advice in response to the payment message.
- AB – Indicates that an acknowledgement relating to receipt of message is required.
- AC – Acknowledge complete including changes.
- AD – Acknowledge complete without changes.
- AE – A debit advice is requested for each transaction in the message.
- AF – The sender wishes to receive both a Debit Advice and an acknowledgement of receipt for a payment message.
- AG – Authentication, by a party, of a document established for him by another party.
- AH – A debit advice and message acknowledgement are requested for each transaction in the message.
- AI – Acknowledgement of changes only is required.
- AJ – Indication that the referenced offer or transaction (e.g. cargo booking or quotation request) is being dealt with.
- AP – Indication that the referenced offer or transaction (e.g., cargo booking or quotation request) has been accepted.
- AQ – The sender of the message expects a response.
- AR – Documentary credit collection forwarded directly.
- AS – The receiver of the message is to acknowledge receipt of the message and sent a credit advice for each credit.
- CA – Indication that the referenced offer or transaction (e.g., cargo booking or quotation request) has been accepted under conditions indicated in this message.
- CO – Indication that the message contains the physical measurements on which the charges will be based.
- NA – Specifies that no acknowledgement is needed in response to this message.
- RE – Indication that the referenced offer or transaction (e.g., cargo booking or quotation request) is not accepted.
- UR – The message recipient is to send a credit advice in response to the message.
- US – An acknowledgement is requested when an error occurred.
Showing 20 of 23 values defined for element 4343 in D06B.

DTM To specify date, and/or time, or period. (Max 10) Required

C507 – Date and/or time, or period relevant to the specified date/time/period type.
- 2005 – Code qualifying the function of a date, time or period.
  Type: an, Max Length: 3 (Required)
  Valid Codes:
  - 1 – Actual date/time on which the service was completed.
  - 2 – Date on which buyer requests goods to be delivered.
  - 3 – [2377] Date of issue of an invoice.
  - 4 – [2011] Date of order.
  - 5 – A period of time when saleable stocks are expected to cover demand for a product.
  - 6 – The date an entity moved from a location.
  - 7 – (2069) Date and/or time at which specified event or document becomes effective.
  - 8 – Date/time when the purchase order is received by the seller.
  - 9 – Date/time of processing.
  - 10 – Date on which goods should be shipped or despatched by the supplier.
  - 11 – (2170) Date/time on which the goods are or are expected to be despatched or shipped.
  - 12 – Date by which payment should be made if discount terms are to apply.
  - 13 – Date by which payment must be made.
  - 14 – Date/time when instalments are due.
  - 15 – Date/time when promotion activities begin.
  - 16 – Date/time when promotion activities end.
  - 17 – Date and/or time when the shipper of the goods expects delivery will take place.
  - 18 – The date/time/period of the act, or an instance of installing something or someone.
  - 19 – Period of time between slaughter and delivery during which meat is ageing.
  - 20 – Date/time when cheque is issued.
  Showing 20 of 748 values defined for element 2005 in D06B.
- 2380 – The value of a date, a date and time, a time or of a period in a specified representation.
  Type: an, Max Length: 35
- 2379 – Code specifying the representation of a date, time or period.
  Type: an, Max Length: 3
  Valid Codes:
  - 2 – Calendar date: D = Day; M = Month; Y = Year.
  - 3 – Calendar date: M = Month; D = Day; Y = Year.
  - 4 – Calendar date C=Century; Y=Year; M=Month; D=Day.
  - 5 – Calendar date and time: C=Century; Y=Year; M=Month; D=Day; H=Hour; M=Minute.
  - 6 – Half-month: CC=century YY=year MM=month, B=1:first half month, B=2:second half month.
  - 7 – Week within a calendar month: CC=century YY=year MM=month. W=1-5 first week to fifth week in a month.
  - 8 – Shift within a calendar day: CC=century YY=year MM=month DD=day S=1-9 shift in a day.
  - 9 – Time period within a calendar day: CC=century YY=year MM=month DD=day PP=00-99 time period.
  - 10 – Calendar date including time with minutes: C=Century; Y=Year; M=Month; D=Day; T=Time designator; H=Hour; M=Minutes. The character [T] shall be used as time designator to indicate the start of the representation of the time. For example: 20010912T1433.
  - 101 – Calendar date: Y = Year; M = Month; D = Day.
  - 102 – Calendar date: C = Century ; Y = Year ; M = Month ; D = Day.
  - 103 – Calendar week day: Y = Year ; W = Week ; D = Day Week number 01 is always first week of January Day number 1 is always Monday.
  - 104 – A period of time specified by giving the start week of a month followed by the end week of a month. Data is to be transmitted as consecutive characters without hyphen.
  - 105 – Calendar day: Y = Year ; D = Day January the first = Day 001 Always start numbering the days of the year from January 1st through December 31st.
  - 106 – Day of a month: M = Month; D = Day.
  - 107 – Day's number within a specific year: D = Day.
  - 108 – Week's number within a specific year: W = Week.
  - 109 – Month's number within a specific year: M = Month.
  - 110 – Day's number within is a specific month: D = Day.
  - 201 – Calendar date including time without seconds: Y = Year; M = Month; D = Day; H = Hour; M = Minute.
  Showing 20 of 81 values defined for element 2379 in D06B.

FTX To provide free form or coded text information. (Max 5)

C107 – Coded reference to a standard text and its source.
- 4441 – Code specifying free form text.
  Type: an, Max Length: 17 (Required)
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 319 values defined for element 3055 in D06B.
C108 – Free text; one to five lines.
- 4440 – Free form text.
  Type: an, Max Length: 512 (Required)
- 4440 – Free form text.
  Type: an, Max Length: 512
- 4440 – Free form text.
  Type: an, Max Length: 512
- 4440 – Free form text.
  Type: an, Max Length: 512
- 4440 – Free form text.
  Type: an, Max Length: 512
4451 – Code qualifying the subject of the text.
Type: an, Max Length: 3 (Required)
Valid Codes:
- AAA – [7002] Plain language description of the nature of a goods item sufficient to identify it for customs, statistical or transport purposes.
- AAB – [4276] Free form description of the conditions of payment between the parties to a transaction.
- AAC – [7488] Additional information concerning dangerous substances and/or article in a consignment.
- AAD – [7254] Proper shipping name, supplemented as necessary with the correct technical name, by which a dangerous substance or article may be correctly identified, or which is sufficiently informative to permit identification by reference to generally available literature.
- AAE – The content of an acknowledgement.
- AAF – Specific details applying to rates.
- AAG – Indicates that the segment contains instructions to be passed on to the identified party.
- AAI – The text contains general information.
- AAJ – Additional conditions specific to this order or project.
- AAK – Information on the price conditions that are expected or given.
- AAL – Expression of a number in characters as length of ten meters.
- AAM – Technical or commercial reasons why a piece of equipment may not be re-used after the current transport terminates.
- AAN – Restrictions in handling depending on the technical characteristics of the piece of equipment or on the nature of the goods.
- AAO – Error described by a free text.
- AAP – Free text of the response to a communication.
- AAQ – A description of the contents of a package.
- AAR – (4053) Free text of the non Incoterms terms of delivery. For Incoterms, use: 4053.
- AAS – The remarks printed or to be printed on a bill of lading.
- AAT – Free text information on an IATA Air Waybill to indicate means by which account is to be settled.
- AAU – Information pertaining to the invoice covering the consignment.
Showing 20 of 359 values defined for element 4451 in D06B.
4453 – Code specifying the function of free text.
Type: an, Max Length: 3
Valid Codes:
- 1 – The occurrence of this text does not affect message processing.
- 2 – Text description of a coded data item for which there is no currently available code.
- 3 – Text must be read before actioning message.
- 4 – Pass text on to later recipient.
- 5 – Indicates that the text is to be taken as a header.
- 6 – Indicates that the text starts a new numbered paragraph.
- 7 – Indicates that the text is a paragraph.
3453 – Code specifying the language name.
Type: an, Max Length: 3
4447 – Code specifying the format of free text.
Type: an, Max Length: 3
Valid Codes:
- 1 – The associated text is centred in the available space.
- 2 – The associated text item is aligned flush left in the available space.
- 3 – The associated text is aligned flush right in the available space.
- 4 – The associated text is justified in the available space.
- 5 – The text is to be preceded by one blank line.
- 6 – The text is to be preceded by two blank lines.
- 7 – The text is to be preceded by three blank lines.
- 8 – The text is a continuation of preceding text.
- 9 – The text is to begin on a new page.
- 10 – The text is the final section of the preceding text.
- 11 – The text is to begin a new line.

Group SG1 (Max 10)

RFF To specify a reference. (Max 1) Required

C506 – Identification of a reference.
- 1153 – Code qualifying a reference.
  Type: an, Max Length: 3 (Required)
  Valid Codes:
  - AAA – (1018) Reference number identifying the acknowledgement of an order.
  - AAB – [1088] Reference number to identify a proforma invoice.
  - AAC – [1172] Reference number to identify a documentary credit.
  - AAD – [1318] Reference number to identify an addendum to a contract.
  - AAE – Reference number assigned to a goods declaration.
  - AAF – A reference number identifying a debit card.
  - AAG – (1332) Reference number assigned by issuing party to an offer.
  - AAH – Reference number allocated by the bank to a batch of different underlying interbank transactions.
  - AAI – Reference number allocated by the bank to one specific interbank transaction.
  - AAJ – Reference number assigned by issuer to a delivery order.
  - AAK – Reference number assigned by issuing party to a despatch advice.
  - AAL – Reference number identifying a specific product drawing.
  - AAM – Reference number assigned to a waybill, see: 1001 = 700.
  - AAN – Reference number assigned by buyer to a delivery schedule.
  - AAO – [1362] Reference number assigned by the consignee to identify a particular consignment.
  - AAP – [1310] Identifier of a shipment which is part of an order.
  - AAQ – [8260] To identify a piece if transport equipment e.g. container or unit load device.
  - AAR – A reference number assigned by a municipality to identify a business.
  - AAS – [1188] Reference number to identify a document evidencing a transport contract.
  - AAT – Identifies the master label number of any package type.
  Showing 20 of 773 values defined for element 1153 in D06B.
- 1154 – Identifies a reference.
  Type: an, Max Length: 70
- 1156 – To identify a line of a document.
  Type: an, Max Length: 6
- 1056 – To identify a version.
  Type: an, Max Length: 9
- 1060 – To identify a revision.
  Type: an, Max Length: 6

DTM To specify date, and/or time, or period. (Max 1)

Elements and codes as defined at DTM above.

Group SG2 (Max 20)

NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required

C082 – Identification of a transaction party by code.
- 3039 – Code specifying the identity of a party.
  Type: an, Max Length: 35 (Required)
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 319 values defined for element 3055 in D06B.
C058 – Unstructured name and address: one to five lines.
- 3124 – Free form description of a name and address line.
  Type: an, Max Length: 35 (Required)
- 3124 – Free form description of a name and address line.
  Type: an, Max Length: 35
- 3124 – Free form description of a name and address line.
  Type: an, Max Length: 35
- 3124 – Free form description of a name and address line.
  Type: an, Max Length: 35
- 3124 – Free form description of a name and address line.
  Type: an, Max Length: 35
C080 – Identification of a transaction party by name, one to five lines. Party name may be formatted.
- 3036 – Name of a party.
  Type: an, Max Length: 35 (Required)
- 3036 – Name of a party.
  Type: an, Max Length: 35
- 3036 – Name of a party.
  Type: an, Max Length: 35
- 3036 – Name of a party.
  Type: an, Max Length: 35
- 3036 – Name of a party.
  Type: an, Max Length: 35
- 3045 – Code specifying the representation of a party name.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Name component 1: Family name. Name component 2: Given name or initials. Name component 3: Given name or initials. Name component 4: Maiden name. Name component 5: Title Group of name components transmitted in sequence with name component 1 transmitted first. The maiden name is the family name given at birth of a female. Other names are self-explanatory.
  - 2 – Name component 1: paternal name; name component 2: maternal name; name component 3: given name or initial(s); name component 4: middle name or initial(s); name component 5: name suffix.
  - 3 – Name component 1: Qualification Name component 2: First part of the name Name component 3: Second part of the name.
C059 – Street address and/or PO Box number in a structured address: one to four lines.
- 3042 – To identify a street and number and/or Post Office box number.
  Type: an, Max Length: 35 (Required)
- 3042 – To identify a street and number and/or Post Office box number.
  Type: an, Max Length: 35
- 3042 – To identify a street and number and/or Post Office box number.
  Type: an, Max Length: 35
- 3042 – To identify a street and number and/or Post Office box number.
  Type: an, Max Length: 35
C819 – To specify a country subdivision, such as state, canton, county, prefecture.
- 3229 – To identify a country subdivision, such as state, canton, county, prefecture.
  Type: an, Max Length: 9
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 319 values defined for element 3055 in D06B.
- 3228 – Name of a country subdivision, such as state, canton, county, prefecture.
  Type: an, Max Length: 70
3035 – Code giving specific meaning to a party.
Type: an, Max Length: 3 (Required)
Valid Codes:
- AA – Party to be billed in accordance with AAR Accounting rule 11.
- AB – Third party who arranged the purchase of merchandise on behalf of the actual buyer.
- AE – Any natural or legal person who makes a declaration to an official body on behalf of another natural or legal person, where legally permitted (CCC).
- AF – Natural or legal person responsible for the satisfactory performance of a Customs transit operation. Source: CCC.
- AG – (3196) Party authorized to act on behalf of another party. Synonym: Representative.
- AH – Agent acting on behalf of the transit principal (CCC).
- AI – Person who has been chosen for a job.
- AJ – The party which has issued all mutually agreed codes used in the message.
- AK – Party to whom acknowledgement should be sent.
- AL – (3340) Party accepting liability for goods held or moving (e.g. transit) under a Customs authorization and - when applicable - a guarantee.
- AM – Employee of a company or firm authorized to act on behalf of that company or firm e.g. to make a Customs declaration.
- AN – Person or company which is authorised by the relevant Customs authority to import goods without payment all taxes or specific taxes at the point of entry into the country.
- AO – Party account is assigned to.
- AP – (3336) Party accepting goods, products, services, etc.
- AQ – Person or company approved by the relevant authority in the country to pack and export specific goods under Customs supervision.
- AR – Exporter authorized/approved by Customs for special Customs procedures e.g. simplified procedure.
- AS – Identifies the financial institution servicing the account(s).
- AT – Importer authorized/approved by Customs for special Customs procedures e.g. simplified procedure.
- AU – Trader authorized/approved by Customs for special transit procedures e.g. simplified procedure.
- AV – Party that has delegated the authority to take a certain action on behalf of a company or agency.
Showing 20 of 559 values defined for element 3035 in D06B.
3164 – Name of a city.
Type: an, Max Length: 35
3251 – Code specifying the postal zone or address.
Type: an, Max Length: 17
3207 – Identification of the name of the country or other geographical entity as defined in ISO 3166-1 and UN/ECE Recommendation 3.
Type: an, Max Length: 3

LOC To identify a place or a location and/or related locations. (Max 10)

C517 – Identification of a location by code or name.
- 3225 – To identify a location.
  Type: an, Max Length: 35
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 319 values defined for element 3055 in D06B.
- 3224 – Name of the location.
  Type: an, Max Length: 256
C519 – Identification the first related location by code or name.
- 3223 – To identify a first related location.
  Type: an, Max Length: 35
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 319 values defined for element 3055 in D06B.
- 3222 – Name of first related location.
  Type: an, Max Length: 70
C553 – Identification of second related location by code or name.
- 3233 – To identify a second related location.
  Type: an, Max Length: 35
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 319 values defined for element 3055 in D06B.
- 3232 – Name of the second related location.
  Type: an, Max Length: 70
3227 – Code identifying the function of a location.
Type: an, Max Length: 3 (Required)
Valid Codes:
- 1 – (3018) Point or port of departure, shipment or destination, as required under the applicable terms of delivery, e.g. Incoterms.
- 2 – [3109] To identify the place where the payment has been or should be made.
- 3 – Place where equipment tare has been or must be checked for official assessment.
- 4 – Place at which the goods have been received.
- 5 – (3214) Port, airport or other location from which a means of transport or transport equipment is scheduled to depart or has departed.
- 6 – A bed in a ward.
- 7 – (3246) Place to which the goods are to be finally delivered under transport contract terms (operational term).
- 8 – Port, airport or other location to which a means of transport or transport equipment is destined.
- 9 – [3334] Seaport, airport, freight terminal, rail station or other place at which the goods (cargo) are loaded on to the means of transport being used for their carriage.
- 10 – [3348] Place where the goods are taken over by the carrier.
- 11 – [3392] Seaport, airport, freight terminal, rail station or other place at which goods are unloaded from the means of transport having been used for their carriage.
- 12 – Port at which the goods are discharged from the vessel used for their transport.
- 13 – [3424] Place where goods are to be or have been transferred from one means of transport to another during the course of one transport operation.
- 14 – [3385] To identify the place where a goods item is located.
- 15 – Place where the responsibility is transferred.
- 16 – Place where the ownership of the goods is transferred.
- 17 – Place where goods are transported across a country border.
- 18 – [3156] Warehouse where a particular consignment is to be or has been stored.
- 19 – Factory/plant relevant for a particular consignment.
- 20 – Place where goods will ultimately be delivered.
Showing 20 of 257 values defined for element 3227 in D06B.
5479 – Code specifying a relation.
Type: an, Max Length: 3

FTX To provide free form or coded text information. (Max 5)

Elements and codes as defined at FTX above.

Group SG3 (Max 5)

CTA To identify a person or a department to whom communication should be directed. (Max 1) Required

C056 – Code and/or name of a contact such as a department or employee. Code preferred.
- 3413 – To identify a contact, such as a department or employee.
  Type: an, Max Length: 17
- 3412 – Name of a contact, such as a department or employee.
  Type: an, Max Length: 256
3139 – Code specifying the function of a contact (e.g. department or person).
Type: an, Max Length: 3
Valid Codes:
- AA – Department/person to contact for matters regarding insurance.
- AB – Department/person to contact for matters regarding the workshop.
- AC – Department/person in charge of accepting incoming goods.
- AD – The contact responsible for accounting matters.
- AE – Department/person to contact for matters regarding contracts.
- AF – Department/person to contact for matters regarding land registry.
- AG – Department/person of the agent which acts on behalf of another party.
- AH – Department/person to contact for matters regarding technical coordination of works.
- AI – Department/person to contact for matters regarding project management on behalf of the contractor.
- AJ – Department/person to contact for matters regarding investments.
- AK – Department/person to contact for matters regarding management of works on behalf of the owner.
- AL – Department/person to contact for matters regarding personnel (human resources).
- AM – Department/person to contact for matters regarding claims.
- AN – Department/person to contact for laboratory matters.
- AO – Department/person to contact for matters regarding plant/equipment.
- AP – Department/person responsible for the accounts payable function within a corporation.
- AQ – Department/person to contact for matters regarding quantity surveying.
- AR – Department/person responsible for the accounts receivable within a corporation.
- AS – Department/person to contact for matters regarding public relations.
- AT – Department/person to contact for matters regarding technical issues.
Showing 20 of 97 values defined for element 3139 in D06B.

COM To identify a communication number of a department or a person to whom communication should be directed. (Max 5)

C076 – Communication number of a department or employee in a specified channel.
- 3148 – To identify a communication address.
  Type: an, Max Length: 512 (Required)
- 3155 – Code specifying the type of communication address.
  Type: an, Max Length: 3 (Required)
  Valid Codes:
  - AA – A process that, on demand, connects two or more data terminal equipments and permits the exclusive use of a data circuit between them until the connection is released (ISO).
  - AB – Communications number assigned by Societe Internationale de Telecommunications Aeronautiques (SITA).
  - AC – Communications number assigned by Aeronautical Radio Inc.
  - AD – AT&T mailbox identifier.
  - AE – Peripheral device identification.
  - AF – The switched telecommunications network of the United States Department of Defense.
  - AG – The switched telecommunications network of the United States government.
  - AH – Data exchange via the World Wide Web.
  - AI – Identifies that portion of an international telephone number representing the country code to be used when calling internationally.
  - AJ – Identifies the alternate telephone number.
  - AK – Code that identifies the communications number for the online videotex service.
  - AL – Identifies the cellular phone number.
  - AM – The international telephone direct line number.
  - AN – ODETTE File Transfer Protocol.
  - AO – Identification of the Uniform Resource Location (URL) Synonym: World wide web address.
  - AP – VHF radio telephone.
  - AQ – The X.400 address accepting information in the body text of a message.
  - AR – Address capable of receiving messages in accordance with the EDIINT/AS1 protocol for MIME based EDI .
  - AS – Address capable of receiving messages in accordance with the EDIINT/AS2 protocol.
  - AT – Address capable of receiving messages in accordance with the EDIINT/AS3 protocol.
  Showing 20 of 45 values defined for element 3155 in D06B.

Group SG4 (Max 9999) Required

SEQ To provide details relating to the sequence. (Max 1) Required

C286 – Identification of a sequence and source for sequencing.
- 1050 – To identify a position in a sequence.
  Type: an, Max Length: 10 (Required)
- 1159 – Code specifying the source of a sequence identifier.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Report from workstation 1.
  - 2 – Report from workstation 2.
  - 3 – The manufacturer's plant requesting the delivery of the item has allocated the sequence number.
  - 4 – The plant requesting the delivery of an item assigns a number indicating the sequence of the finished article.
  - 5 – The positional sequence when transmitted.
  - 6 – The positional sequence in a message structure as published in a particular UN directory.
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 319 values defined for element 3055 in D06B.
1229 – Code specifying the action to be taken or already taken.
Type: an, Max Length: 3
Valid Codes:
- 1 – The information is to be or has been added.
- 2 – The information is to be or has been deleted.
- 3 – The information is to be or has been changed.
- 4 – This line item is not affected by the actual message.
- 5 – This line item is entirely accepted by the seller.
- 6 – This line item is accepted but amended by the seller.
- 7 – This line item is not accepted by the seller.
- 8 – Code specifying that the message is a schedule only.
- 9 – Code specifying that amendments are requested/notified.
- 10 – This line item is not found in the referenced message.
- 11 – This line is not amended by the buyer.
- 12 – Code specifying that the line item numbers have changed.
- 13 – Buyer has deducted amount from payment.
- 14 – Buyer has a claim against an outstanding invoice.
- 15 – Factor has been requested to charge back the outstanding item.
- 16 – Seller agrees to issue a credit note.
- 17 – New settlement terms have been agreed.
- 18 – Factor agrees to abide by the outcome of negotiations between seller and buyer.
- 19 – Seller does not accept validity of dispute.
- 20 – The reported situation is settled.
Showing 20 of 115 values defined for element 1229 in D06B.

DTM To specify date, and/or time, or period. (Max 5)

Elements and codes as defined at DTM above.

GIR To specify a related set of identification numbers. (Max 99)

C206 – The identification of an object.
- 7402 – Code specifying the unique identity of an object.
  Type: an, Max Length: 35 (Required)
- 7405 – Code qualifying the identification of an object.
  Type: an, Max Length: 3
  Valid Codes:
  - AA – A number that is used to identify goods from a freight forwarder/consolidator.
  - AB – The first element in a series of elements that together define the structure of an object.
  - AC – The second element in a series of elements that together define the structure of an object.
  - AD – The third element in a series of elements that together define the structure of an object.
  - AE – The fourth element in a series of elements that together define the structure of an object.
  - AF – The fifth element in a series of elements that together define the structure of an object.
  - AG – The sixth element in a series of elements that together define the structure of an object.
  - AH – The seventh element in a series of elements that together define the structure of an object.
  - AI – The eighth element in a series of elements that together define the structure of an object.
  - AJ – The ninth element in a series of elements that together define the structure of an object.
  - AK – The identity of a data set.
  - AL – [1420] Reference number to identify a kanban card.
  - AM – Level number in a hierarchy or other structure.
  - AN – A unique number identifying a particular assembly or other manufacturing process.
  - AO – A number to identify the position within a package according to agreed rules between partners.
  - AP – A name or number which identifies a product.
  - AQ – Number assigned to a release.
  - AR – Statistical concept.
  - AS – A table of items e.g. figures and text represented in rows and columns.
  - AT – Number identifying a group of articles in a predescribed unit load for shipment/dispatch as agreed between partners.
  Showing 20 of 85 values defined for element 7405 in D06B.
- 4405 – Code specifying a status.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Remark that the requested service in the order remains outstanding.
  - 2 – The instruction has been completed.
  - 3 – The information has been passed on.
  - 4 – The amount has the status of finality.
  - 5 – The amount is subject to finality.
  - 6 – The amount quoted is a minimum tariff.
  - 7 – The amount quoted is a fixed tariff.
  - 8 – The amount quoted is a maximum tariff.
  - 9 – The amount is quoted for information only, it is not part of the charges to be deducted or added.
  - 10 – The amount is available today.
  - 11 – The amount is available on the next banking office day after the booking date.
  - 12 – The amount is available on the second banking office day after the booking date.
  - 13 – The amount available on the third banking office day after the booking date.
  - 14 – Funds not collected by beneficiary.
  - 15 – The amount or quantity is zero.
  - 16 – No status or condition has been advised.
  - 17 – A status or condition has been requested.
  - 18 – No charge is to be made.
  - 19 – The quantity has been the subject of a rounding operation.
  - 20 – Intended to last or function indefinitely.
  Showing 20 of 128 values defined for element 4405 in D06B.
C206 – The identification of an object.
- 7402 – Code specifying the unique identity of an object.
  Type: an, Max Length: 35 (Required)
- 7405 – Code qualifying the identification of an object.
  Type: an, Max Length: 3
  Valid Codes:
  - AA – A number that is used to identify goods from a freight forwarder/consolidator.
  - AB – The first element in a series of elements that together define the structure of an object.
  - AC – The second element in a series of elements that together define the structure of an object.
  - AD – The third element in a series of elements that together define the structure of an object.
  - AE – The fourth element in a series of elements that together define the structure of an object.
  - AF – The fifth element in a series of elements that together define the structure of an object.
  - AG – The sixth element in a series of elements that together define the structure of an object.
  - AH – The seventh element in a series of elements that together define the structure of an object.
  - AI – The eighth element in a series of elements that together define the structure of an object.
  - AJ – The ninth element in a series of elements that together define the structure of an object.
  - AK – The identity of a data set.
  - AL – [1420] Reference number to identify a kanban card.
  - AM – Level number in a hierarchy or other structure.
  - AN – A unique number identifying a particular assembly or other manufacturing process.
  - AO – A number to identify the position within a package according to agreed rules between partners.
  - AP – A name or number which identifies a product.
  - AQ – Number assigned to a release.
  - AR – Statistical concept.
  - AS – A table of items e.g. figures and text represented in rows and columns.
  - AT – Number identifying a group of articles in a predescribed unit load for shipment/dispatch as agreed between partners.
  Showing 20 of 85 values defined for element 7405 in D06B.
- 4405 – Code specifying a status.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Remark that the requested service in the order remains outstanding.
  - 2 – The instruction has been completed.
  - 3 – The information has been passed on.
  - 4 – The amount has the status of finality.
  - 5 – The amount is subject to finality.
  - 6 – The amount quoted is a minimum tariff.
  - 7 – The amount quoted is a fixed tariff.
  - 8 – The amount quoted is a maximum tariff.
  - 9 – The amount is quoted for information only, it is not part of the charges to be deducted or added.
  - 10 – The amount is available today.
  - 11 – The amount is available on the next banking office day after the booking date.
  - 12 – The amount is available on the second banking office day after the booking date.
  - 13 – The amount available on the third banking office day after the booking date.
  - 14 – Funds not collected by beneficiary.
  - 15 – The amount or quantity is zero.
  - 16 – No status or condition has been advised.
  - 17 – A status or condition has been requested.
  - 18 – No charge is to be made.
  - 19 – The quantity has been the subject of a rounding operation.
  - 20 – Intended to last or function indefinitely.
  Showing 20 of 128 values defined for element 4405 in D06B.
C206 – The identification of an object.
- 7402 – Code specifying the unique identity of an object.
  Type: an, Max Length: 35 (Required)
- 7405 – Code qualifying the identification of an object.
  Type: an, Max Length: 3
  Valid Codes:
  - AA – A number that is used to identify goods from a freight forwarder/consolidator.
  - AB – The first element in a series of elements that together define the structure of an object.
  - AC – The second element in a series of elements that together define the structure of an object.
  - AD – The third element in a series of elements that together define the structure of an object.
  - AE – The fourth element in a series of elements that together define the structure of an object.
  - AF – The fifth element in a series of elements that together define the structure of an object.
  - AG – The sixth element in a series of elements that together define the structure of an object.
  - AH – The seventh element in a series of elements that together define the structure of an object.
  - AI – The eighth element in a series of elements that together define the structure of an object.
  - AJ – The ninth element in a series of elements that together define the structure of an object.
  - AK – The identity of a data set.
  - AL – [1420] Reference number to identify a kanban card.
  - AM – Level number in a hierarchy or other structure.
  - AN – A unique number identifying a particular assembly or other manufacturing process.
  - AO – A number to identify the position within a package according to agreed rules between partners.
  - AP – A name or number which identifies a product.
  - AQ – Number assigned to a release.
  - AR – Statistical concept.
  - AS – A table of items e.g. figures and text represented in rows and columns.
  - AT – Number identifying a group of articles in a predescribed unit load for shipment/dispatch as agreed between partners.
  Showing 20 of 85 values defined for element 7405 in D06B.
- 4405 – Code specifying a status.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Remark that the requested service in the order remains outstanding.
  - 2 – The instruction has been completed.
  - 3 – The information has been passed on.
  - 4 – The amount has the status of finality.
  - 5 – The amount is subject to finality.
  - 6 – The amount quoted is a minimum tariff.
  - 7 – The amount quoted is a fixed tariff.
  - 8 – The amount quoted is a maximum tariff.
  - 9 – The amount is quoted for information only, it is not part of the charges to be deducted or added.
  - 10 – The amount is available today.
  - 11 – The amount is available on the next banking office day after the booking date.
  - 12 – The amount is available on the second banking office day after the booking date.
  - 13 – The amount available on the third banking office day after the booking date.
  - 14 – Funds not collected by beneficiary.
  - 15 – The amount or quantity is zero.
  - 16 – No status or condition has been advised.
  - 17 – A status or condition has been requested.
  - 18 – No charge is to be made.
  - 19 – The quantity has been the subject of a rounding operation.
  - 20 – Intended to last or function indefinitely.
  Showing 20 of 128 values defined for element 4405 in D06B.
C206 – The identification of an object.
- 7402 – Code specifying the unique identity of an object.
  Type: an, Max Length: 35 (Required)
- 7405 – Code qualifying the identification of an object.
  Type: an, Max Length: 3
  Valid Codes:
  - AA – A number that is used to identify goods from a freight forwarder/consolidator.
  - AB – The first element in a series of elements that together define the structure of an object.
  - AC – The second element in a series of elements that together define the structure of an object.
  - AD – The third element in a series of elements that together define the structure of an object.
  - AE – The fourth element in a series of elements that together define the structure of an object.
  - AF – The fifth element in a series of elements that together define the structure of an object.
  - AG – The sixth element in a series of elements that together define the structure of an object.
  - AH – The seventh element in a series of elements that together define the structure of an object.
  - AI – The eighth element in a series of elements that together define the structure of an object.
  - AJ – The ninth element in a series of elements that together define the structure of an object.
  - AK – The identity of a data set.
  - AL – [1420] Reference number to identify a kanban card.
  - AM – Level number in a hierarchy or other structure.
  - AN – A unique number identifying a particular assembly or other manufacturing process.
  - AO – A number to identify the position within a package according to agreed rules between partners.
  - AP – A name or number which identifies a product.
  - AQ – Number assigned to a release.
  - AR – Statistical concept.
  - AS – A table of items e.g. figures and text represented in rows and columns.
  - AT – Number identifying a group of articles in a predescribed unit load for shipment/dispatch as agreed between partners.
  Showing 20 of 85 values defined for element 7405 in D06B.
- 4405 – Code specifying a status.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Remark that the requested service in the order remains outstanding.
  - 2 – The instruction has been completed.
  - 3 – The information has been passed on.
  - 4 – The amount has the status of finality.
  - 5 – The amount is subject to finality.
  - 6 – The amount quoted is a minimum tariff.
  - 7 – The amount quoted is a fixed tariff.
  - 8 – The amount quoted is a maximum tariff.
  - 9 – The amount is quoted for information only, it is not part of the charges to be deducted or added.
  - 10 – The amount is available today.
  - 11 – The amount is available on the next banking office day after the booking date.
  - 12 – The amount is available on the second banking office day after the booking date.
  - 13 – The amount available on the third banking office day after the booking date.
  - 14 – Funds not collected by beneficiary.
  - 15 – The amount or quantity is zero.
  - 16 – No status or condition has been advised.
  - 17 – A status or condition has been requested.
  - 18 – No charge is to be made.
  - 19 – The quantity has been the subject of a rounding operation.
  - 20 – Intended to last or function indefinitely.
  Showing 20 of 128 values defined for element 4405 in D06B.
C206 – The identification of an object.
- 7402 – Code specifying the unique identity of an object.
  Type: an, Max Length: 35 (Required)
- 7405 – Code qualifying the identification of an object.
  Type: an, Max Length: 3
  Valid Codes:
  - AA – A number that is used to identify goods from a freight forwarder/consolidator.
  - AB – The first element in a series of elements that together define the structure of an object.
  - AC – The second element in a series of elements that together define the structure of an object.
  - AD – The third element in a series of elements that together define the structure of an object.
  - AE – The fourth element in a series of elements that together define the structure of an object.
  - AF – The fifth element in a series of elements that together define the structure of an object.
  - AG – The sixth element in a series of elements that together define the structure of an object.
  - AH – The seventh element in a series of elements that together define the structure of an object.
  - AI – The eighth element in a series of elements that together define the structure of an object.
  - AJ – The ninth element in a series of elements that together define the structure of an object.
  - AK – The identity of a data set.
  - AL – [1420] Reference number to identify a kanban card.
  - AM – Level number in a hierarchy or other structure.
  - AN – A unique number identifying a particular assembly or other manufacturing process.
  - AO – A number to identify the position within a package according to agreed rules between partners.
  - AP – A name or number which identifies a product.
  - AQ – Number assigned to a release.
  - AR – Statistical concept.
  - AS – A table of items e.g. figures and text represented in rows and columns.
  - AT – Number identifying a group of articles in a predescribed unit load for shipment/dispatch as agreed between partners.
  Showing 20 of 85 values defined for element 7405 in D06B.
- 4405 – Code specifying a status.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Remark that the requested service in the order remains outstanding.
  - 2 – The instruction has been completed.
  - 3 – The information has been passed on.
  - 4 – The amount has the status of finality.
  - 5 – The amount is subject to finality.
  - 6 – The amount quoted is a minimum tariff.
  - 7 – The amount quoted is a fixed tariff.
  - 8 – The amount quoted is a maximum tariff.
  - 9 – The amount is quoted for information only, it is not part of the charges to be deducted or added.
  - 10 – The amount is available today.
  - 11 – The amount is available on the next banking office day after the booking date.
  - 12 – The amount is available on the second banking office day after the booking date.
  - 13 – The amount available on the third banking office day after the booking date.
  - 14 – Funds not collected by beneficiary.
  - 15 – The amount or quantity is zero.
  - 16 – No status or condition has been advised.
  - 17 – A status or condition has been requested.
  - 18 – No charge is to be made.
  - 19 – The quantity has been the subject of a rounding operation.
  - 20 – Intended to last or function indefinitely.
  Showing 20 of 128 values defined for element 4405 in D06B.
7297 – Code qualifying the type of set.
Type: an, Max Length: 3 (Required)
Valid Codes:
- 1 – Identification of the product set.
- 2 – Identification of the licence set.
- 3 – Related numbers identifying a package such as a bar code label number related to a kanban card number, etc.
- 4 – A code which indicates that the identities which follow are related to a particular vehicle which may have been previously identified.
- 5 – The source database of the data in a data set.
- 6 – The target database for the data in a data set.
- 7 – A coded or non coded list of values.
- 8 – The contract related item numbers.
- 9 – Financial security identifier set.
- 10 – A code to identify a set of numbers used for accounting.
- 11 – A set of numbers to identify a project.
- 12 – A set of numbers to identify a plan of work.
- 13 – A set of numbers to identify a schedule of work.
- 14 – A set of numbers to identify a resource.
- 15 – A set of numbers to identify a milestone event.
- 16 – A set of numbers to identify an interface work task.
- 17 – A set of numbers to identify a work task constraint.
- 18 – Position number(s) of a data structure's relevant components.

LOC To identify a place or a location and/or related locations. (Max 5)

Elements and codes as defined at LOC above.

Group SG5 (Max 5)

PAC To describe the number and type of packages/physical units. (Max 1) Required

C531 – Packaging level and details, terms and conditions.
- 7075 – Code specifying a level of packaging.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Level of packing, if it exists, that is immediately subordinate to the intermediate packaging level.
  - 2 – Level of packaging, if it exists, that is immediately subordinate to the outer packaging level.
  - 3 – For packed merchandise, outermost level of packaging for a shipment.
  - 4 – There is no specifiable level of packaging: packaging is inner and outer level as well.
  - 5 – The packaging level being described is the shipment level.
- 7233 – Code specifying information related to packaging.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – The ingredients of the product are not marked on the packaging of the product.
  - 2 – The product price is not marked on the packaging of the product.
  - 3 – The product best before date is not marked on the packaging of the product.
  - 4 – Package is not marked as recyclable.
  - 5 – A code indicating that promotional details have been marked on the package.
  - 6 – The item is labeled according to the general EAN.UCC specifications for clothing and fashion accessories.
  - 31 – Package is marked with the product best before date.
  - 32 – The package is marked recyclable.
  - 33 – The package is marked returnable.
  - 34 – The information is related to product marking.
  - 35 – The information is related to the type of package.
  - 36 – The information specifies the package.
  - 37 – The information is related to protection of the package.
  - 38 – The information describes how coverage with tarpaulins is to be provided.
  - 39 – The information describes the platform or skid location.
  - 40 – The information gives the location of the load bearing piece.
  - 41 – The information describes the type of skid or pallet.
  - 42 – The information describes the placement on the carrier.
  - 43 – Descriptions to be provided.
  - 44 – The information specifies the unloading device which must be used to handle the package.
  Showing 20 of 47 values defined for element 7233 in D06B.
- 7073 – Code specifying the packaging terms and conditions.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – The cost of packaging is paid by the supplier.
  - 2 – The cost of packaging is paid by the recipient.
  - 3 – There is no charge for packaging because it is returnable.
  - 4 – The packaging terms and conditions are specified by the buyer.
  - 5 – Reusable packaging owned by the carrier.
  - 6 – Disposable packaging supplied by the carrier.
  - 7 – Reusable packaging owned by the seller.
  - 8 – Disposable packaging supplied by the seller.
  - 9 – Reusable packaging specifically designed for packaging of the referenced item and owned by the buyer.
  - 10 – Disposable packaging specifically designed for packaging of the referenced item.
  - 11 – Reusable multi-purpose packaging owned by the buyer.
  - 12 – Reusable multi-purpose packaging owned by the seller.
  - 13 – The referenced item is to be supplied without packaging.
  - 14 – Non-standard reusable packaging owned by the seller.
  - 15 – The packaging used must meet durability and handling characteristics required for item export.
  - 16 – The packaging used must meet durability and handling characteristics required for domestic usage.
  - 17 – The cost of packaging is included in the item price.
  - 18 – The cost of packaging is shared equally between the buyer and seller.
  - 19 – The packaging cost will be invoiced on a separate message or document.
  - 20 – The packaging is free of charge.
  Showing 20 of 29 values defined for element 7073 in D06B.
C202 – Type of package by name or by code from a specified source.
- 7065 – Code specifying the type of package.
  Type: an, Max Length: 17
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 319 values defined for element 3055 in D06B.
- 7064 – Description of the form in which goods are presented.
  Type: an, Max Length: 35
C402 – Identification of the form in which goods are described.
- 7077 – Code specifying the format of a description.
  Type: an, Max Length: 3 (Required)
  Valid Codes:
  - A – Long description of an item in free form.
  - B – Description of an item in coded and free form text.
  - C – Description of an item in coded format.
  - D – Price look-up description of a product for point of sale receipts.
  - E – Short description of an item in free form.
  - F – Description of an item in free form text.
  - S – Description of an item in a structured format.
  - X – Description of an item in a coded and free text format.
- 7064 – Description of the form in which goods are presented.
  Type: an, Max Length: 35 (Required)
- 7143 – Coded identification of an item type.
  Type: an, Max Length: 3
  Valid Codes:
  - AA – Number assigned by manufacturer or seller to identify the release of a product.
  - AB – The item number is that of an assembly.
  - AC – Article identifier used within health sector to indicate data used conforms to HIBC.
  - AD – Number assigned to a cold roll.
  - AE – Number assigned to a hot roll.
  - AF – Number assigned to a slab, which is produced in a particular production step.
  - AG – A number assigned to indicate a revision of software.
  - AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
  - AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
  - AJ – Number assigned to a sample.
  - AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
  - AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
  - AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
  - AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
  - AO – A code which specifies the codification of the state's labelling requirements.
  - AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
  - AQ – A number identifying a coupon.
  - AR – A number to identify a resource.
  - AS – A number to identify a work task.
  - AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.
  Showing 20 of 107 values defined for element 7143 in D06B.
- 7064 – Description of the form in which goods are presented.
  Type: an, Max Length: 35
- 7143 – Coded identification of an item type.
  Type: an, Max Length: 3
  Valid Codes:
  - AA – Number assigned by manufacturer or seller to identify the release of a product.
  - AB – The item number is that of an assembly.
  - AC – Article identifier used within health sector to indicate data used conforms to HIBC.
  - AD – Number assigned to a cold roll.
  - AE – Number assigned to a hot roll.
  - AF – Number assigned to a slab, which is produced in a particular production step.
  - AG – A number assigned to indicate a revision of software.
  - AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
  - AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
  - AJ – Number assigned to a sample.
  - AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
  - AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
  - AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
  - AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
  - AO – A code which specifies the codification of the state's labelling requirements.
  - AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
  - AQ – A number identifying a coupon.
  - AR – A number to identify a resource.
  - AS – A number to identify a work task.
  - AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.
  Showing 20 of 107 values defined for element 7143 in D06B.
C532 – Indication of responsibility for payment and load contents of returnable packages.
- 8395 – Code specifying the responsibility for the freight payment for a returnable package.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – The freight charges involved with returning of the packaging are to be paid by the customer.
  - 2 – There is no charge for the freight of returning the packaging.
  - 3 – The responsibility for the freight for returning the packaging is to be paid by the supplier.
  - ZZZ – A code assigned within a code list to be used on an interim basis and as defined among trading partners until a precise code can be assigned to the code list.
- 8393 – Code specifying the load contents for a returnable package.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Loaded with empty 4-block for blocking purposes.
  - 2 – The container is, has been, or will be returned with dunnage only.
  - 3 – The container is, has been, or will be returned empty.
  - 4 – The package is, has been, or will be returned loaded with production material.
  - 6 – The package is, has been, or will be returned loaded with obsolete material.
  - 7 – The package is, has been, or will be returned loaded with excess production material.
  - 8 – The package is, has been, or will be returned loaded with rejected material.
  - 10 – The package is, has been, or will be returned loaded with processed material.
7224 – To specify the number of packages.
Type: n, Max Length: 8

Group SG6 (Max 999)

PCI To specify markings and labels on individual packages or physical units. (Max 1) Required

C210 – Shipping marks on packages in free text; one to ten lines.
- 7102 – Free form description of the shipping marks.
  Type: an, Max Length: 35 (Required)
- 7102 – Free form description of the shipping marks.
  Type: an, Max Length: 35
- 7102 – Free form description of the shipping marks.
  Type: an, Max Length: 35
- 7102 – Free form description of the shipping marks.
  Type: an, Max Length: 35
- 7102 – Free form description of the shipping marks.
  Type: an, Max Length: 35
- 7102 – Free form description of the shipping marks.
  Type: an, Max Length: 35
- 7102 – Free form description of the shipping marks.
  Type: an, Max Length: 35
- 7102 – Free form description of the shipping marks.
  Type: an, Max Length: 35
- 7102 – Free form description of the shipping marks.
  Type: an, Max Length: 35
- 7102 – Free form description of the shipping marks.
  Type: an, Max Length: 35
C827 – Specification of the type of marking that reflects the method that was used and the conventions adhered to for marking (e.g. of packages).
- 7511 – Code specifying the type of marking.
  Type: an, Max Length: 3 (Required)
  Valid Codes:
  - 1 – Indication that the package is not marked with an EAN.UCC (International Article Numbering.Uniform Code Council) system code.
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 319 values defined for element 3055 in D06B.
4233 – Code specifying instructions for marking.
Type: an, Max Length: 3
Valid Codes:
- 1 – Packaging should not be marked with supplier's company name.
- 2 – Packaging should be marked with customer's company name.
- 3 – Packaging should be marked with customer's references.
- 4 – Packaging should also be marked with customer's article description.
- 5 – Packaging should be marked with customer's article description only.
- 6 – Packaging should be marked with package's dimensions.
- 7 – Packaging should be marked with net weight.
- 8 – Packaging should be marked with gross weight.
- 9 – Packaging should be marked with tare weight.
- 10 – Packaging should be marked with batch number.
- 11 – Packaging should be marked with customer's article number.
- 12 – Packaging should be marked with the running number of packages.
- 13 – Packaging should be marked with the date of production.
- 14 – Packaging should be marked with the expiry date.
- 15 – Packaging should be marked with the supplier number.
- 16 – Markings as specified by the buyer.
- 17 – Markings as specified by the seller.
- 18 – Markings as specified by carrier.
- 19 – Markings as specified by law.
- 20 – Markings as specified by industry.
Showing 20 of 35 values defined for element 4233 in D06B.
8169 – Code indicating whether an object is full or empty.
Type: an, Max Length: 3
Valid Codes:
- 1 – Indicates that there is more than a quarter of the volume available.
- 2 – Indicates that there is more than a half of the volume available.
- 3 – Indicates that there is more than three quarters of the volume available.
- 4 – Indicates that the object is empty.
- 5 – Indicates that the object is full.
- 6 – Indicates that there is no space available in the object.
- 7 – Indicates that the equipment is fully loaded, and includes a number LCL (Less Than Container Load) consignments.
- 8 – Indicates that the container is fully loaded with a single FCL (Full Container Load) consignment.
- 9 – Container represents part of a consignment declared on a single Customs declaration (i.e. the Customs declaration covers more than one container).
- 10 – Container represents part of the consignment declared on a single Customs declaration with the remainder being in other containers. Other goods, related to other declarations, are also in the container.
- 11 – Merchandise within a container/package covered by a single invoice.
- 12 – Merchandise within a container/package covered by more than one invoice.
- 13 – A container representing a consignment of goods for one consignee with multiple bill of lading numbers.

GIN To give specific identification numbers, either as single numbers or ranges. (Max 10)

C208 – Goods item identification numbers, start and end of consecutively numbered range.
- 7402 – Code specifying the unique identity of an object.
  Type: an, Max Length: 35 (Required)
- 7402 – Code specifying the unique identity of an object.
  Type: an, Max Length: 35
C208 – Goods item identification numbers, start and end of consecutively numbered range.
- 7402 – Code specifying the unique identity of an object.
  Type: an, Max Length: 35 (Required)
- 7402 – Code specifying the unique identity of an object.
  Type: an, Max Length: 35
C208 – Goods item identification numbers, start and end of consecutively numbered range.
- 7402 – Code specifying the unique identity of an object.
  Type: an, Max Length: 35 (Required)
- 7402 – Code specifying the unique identity of an object.
  Type: an, Max Length: 35
C208 – Goods item identification numbers, start and end of consecutively numbered range.
- 7402 – Code specifying the unique identity of an object.
  Type: an, Max Length: 35 (Required)
- 7402 – Code specifying the unique identity of an object.
  Type: an, Max Length: 35
C208 – Goods item identification numbers, start and end of consecutively numbered range.
- 7402 – Code specifying the unique identity of an object.
  Type: an, Max Length: 35 (Required)
- 7402 – Code specifying the unique identity of an object.
  Type: an, Max Length: 35
7405 – Code qualifying the identification of an object.
Type: an, Max Length: 3 (Required)
Valid Codes:
- AA – A number that is used to identify goods from a freight forwarder/consolidator.
- AB – The first element in a series of elements that together define the structure of an object.
- AC – The second element in a series of elements that together define the structure of an object.
- AD – The third element in a series of elements that together define the structure of an object.
- AE – The fourth element in a series of elements that together define the structure of an object.
- AF – The fifth element in a series of elements that together define the structure of an object.
- AG – The sixth element in a series of elements that together define the structure of an object.
- AH – The seventh element in a series of elements that together define the structure of an object.
- AI – The eighth element in a series of elements that together define the structure of an object.
- AJ – The ninth element in a series of elements that together define the structure of an object.
- AK – The identity of a data set.
- AL – [1420] Reference number to identify a kanban card.
- AM – Level number in a hierarchy or other structure.
- AN – A unique number identifying a particular assembly or other manufacturing process.
- AO – A number to identify the position within a package according to agreed rules between partners.
- AP – A name or number which identifies a product.
- AQ – Number assigned to a release.
- AR – Statistical concept.
- AS – A table of items e.g. figures and text represented in rows and columns.
- AT – Number identifying a group of articles in a predescribed unit load for shipment/dispatch as agreed between partners.
Showing 20 of 85 values defined for element 7405 in D06B.

Group SG7 (Max 9999)

LIN To identify a line item and configuration. (Max 1) Required

C212 – Goods identification for a specified source.
- 7140 – To identify an item.
  Type: an, Max Length: 35
- 7143 – Coded identification of an item type.
  Type: an, Max Length: 3
  Valid Codes:
  - AA – Number assigned by manufacturer or seller to identify the release of a product.
  - AB – The item number is that of an assembly.
  - AC – Article identifier used within health sector to indicate data used conforms to HIBC.
  - AD – Number assigned to a cold roll.
  - AE – Number assigned to a hot roll.
  - AF – Number assigned to a slab, which is produced in a particular production step.
  - AG – A number assigned to indicate a revision of software.
  - AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
  - AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
  - AJ – Number assigned to a sample.
  - AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
  - AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
  - AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
  - AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
  - AO – A code which specifies the codification of the state's labelling requirements.
  - AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
  - AQ – A number identifying a coupon.
  - AR – A number to identify a resource.
  - AS – A number to identify a work task.
  - AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.
  Showing 20 of 107 values defined for element 7143 in D06B.
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 319 values defined for element 3055 in D06B.
C829 – To provide an indication that a segment or segment group is used to contain sub-line or sub-line item information and to optionally enable the sub-line to be identified.
- 1082 – To identify a line item.
  Type: an, Max Length: 6
1082 – To identify a line item.
Type: an, Max Length: 6
1229 – Code specifying the action to be taken or already taken.
Type: an, Max Length: 3
Valid Codes:
- 1 – The information is to be or has been added.
- 2 – The information is to be or has been deleted.
- 3 – The information is to be or has been changed.
- 4 – This line item is not affected by the actual message.
- 5 – This line item is entirely accepted by the seller.
- 6 – This line item is accepted but amended by the seller.
- 7 – This line item is not accepted by the seller.
- 8 – Code specifying that the message is a schedule only.
- 9 – Code specifying that amendments are requested/notified.
- 10 – This line item is not found in the referenced message.
- 11 – This line is not amended by the buyer.
- 12 – Code specifying that the line item numbers have changed.
- 13 – Buyer has deducted amount from payment.
- 14 – Buyer has a claim against an outstanding invoice.
- 15 – Factor has been requested to charge back the outstanding item.
- 16 – Seller agrees to issue a credit note.
- 17 – New settlement terms have been agreed.
- 18 – Factor agrees to abide by the outcome of negotiations between seller and buyer.
- 19 – Seller does not accept validity of dispute.
- 20 – The reported situation is settled.
Showing 20 of 115 values defined for element 1229 in D06B.
1222 – To specify a level within a configuration.
Type: n, Max Length: 2
7083 – Code specifying the configuration operation.
Type: an, Max Length: 3
Valid Codes:
- A – The operation is to add to the configuration.
- D – The operation is to delete from the configuration.
- I – The item is a part of the configuration.

PIA To specify additional or substitutional item identification codes. (Max 10)

C212 – Goods identification for a specified source.
- 7140 – To identify an item.
  Type: an, Max Length: 35
- 7143 – Coded identification of an item type.
  Type: an, Max Length: 3
  Valid Codes:
  - AA – Number assigned by manufacturer or seller to identify the release of a product.
  - AB – The item number is that of an assembly.
  - AC – Article identifier used within health sector to indicate data used conforms to HIBC.
  - AD – Number assigned to a cold roll.
  - AE – Number assigned to a hot roll.
  - AF – Number assigned to a slab, which is produced in a particular production step.
  - AG – A number assigned to indicate a revision of software.
  - AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
  - AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
  - AJ – Number assigned to a sample.
  - AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
  - AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
  - AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
  - AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
  - AO – A code which specifies the codification of the state's labelling requirements.
  - AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
  - AQ – A number identifying a coupon.
  - AR – A number to identify a resource.
  - AS – A number to identify a work task.
  - AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.
  Showing 20 of 107 values defined for element 7143 in D06B.
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 319 values defined for element 3055 in D06B.
C212 – Goods identification for a specified source.
- 7140 – To identify an item.
  Type: an, Max Length: 35
- 7143 – Coded identification of an item type.
  Type: an, Max Length: 3
  Valid Codes:
  - AA – Number assigned by manufacturer or seller to identify the release of a product.
  - AB – The item number is that of an assembly.
  - AC – Article identifier used within health sector to indicate data used conforms to HIBC.
  - AD – Number assigned to a cold roll.
  - AE – Number assigned to a hot roll.
  - AF – Number assigned to a slab, which is produced in a particular production step.
  - AG – A number assigned to indicate a revision of software.
  - AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
  - AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
  - AJ – Number assigned to a sample.
  - AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
  - AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
  - AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
  - AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
  - AO – A code which specifies the codification of the state's labelling requirements.
  - AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
  - AQ – A number identifying a coupon.
  - AR – A number to identify a resource.
  - AS – A number to identify a work task.
  - AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.
  Showing 20 of 107 values defined for element 7143 in D06B.
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 319 values defined for element 3055 in D06B.
C212 – Goods identification for a specified source.
- 7140 – To identify an item.
  Type: an, Max Length: 35
- 7143 – Coded identification of an item type.
  Type: an, Max Length: 3
  Valid Codes:
  - AA – Number assigned by manufacturer or seller to identify the release of a product.
  - AB – The item number is that of an assembly.
  - AC – Article identifier used within health sector to indicate data used conforms to HIBC.
  - AD – Number assigned to a cold roll.
  - AE – Number assigned to a hot roll.
  - AF – Number assigned to a slab, which is produced in a particular production step.
  - AG – A number assigned to indicate a revision of software.
  - AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
  - AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
  - AJ – Number assigned to a sample.
  - AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
  - AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
  - AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
  - AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
  - AO – A code which specifies the codification of the state's labelling requirements.
  - AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
  - AQ – A number identifying a coupon.
  - AR – A number to identify a resource.
  - AS – A number to identify a work task.
  - AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.
  Showing 20 of 107 values defined for element 7143 in D06B.
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 319 values defined for element 3055 in D06B.
C212 – Goods identification for a specified source.
- 7140 – To identify an item.
  Type: an, Max Length: 35
- 7143 – Coded identification of an item type.
  Type: an, Max Length: 3
  Valid Codes:
  - AA – Number assigned by manufacturer or seller to identify the release of a product.
  - AB – The item number is that of an assembly.
  - AC – Article identifier used within health sector to indicate data used conforms to HIBC.
  - AD – Number assigned to a cold roll.
  - AE – Number assigned to a hot roll.
  - AF – Number assigned to a slab, which is produced in a particular production step.
  - AG – A number assigned to indicate a revision of software.
  - AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
  - AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
  - AJ – Number assigned to a sample.
  - AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
  - AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
  - AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
  - AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
  - AO – A code which specifies the codification of the state's labelling requirements.
  - AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
  - AQ – A number identifying a coupon.
  - AR – A number to identify a resource.
  - AS – A number to identify a work task.
  - AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.
  Showing 20 of 107 values defined for element 7143 in D06B.
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 319 values defined for element 3055 in D06B.
C212 – Goods identification for a specified source.
- 7140 – To identify an item.
  Type: an, Max Length: 35
- 7143 – Coded identification of an item type.
  Type: an, Max Length: 3
  Valid Codes:
  - AA – Number assigned by manufacturer or seller to identify the release of a product.
  - AB – The item number is that of an assembly.
  - AC – Article identifier used within health sector to indicate data used conforms to HIBC.
  - AD – Number assigned to a cold roll.
  - AE – Number assigned to a hot roll.
  - AF – Number assigned to a slab, which is produced in a particular production step.
  - AG – A number assigned to indicate a revision of software.
  - AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
  - AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
  - AJ – Number assigned to a sample.
  - AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
  - AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
  - AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
  - AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
  - AO – A code which specifies the codification of the state's labelling requirements.
  - AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
  - AQ – A number identifying a coupon.
  - AR – A number to identify a resource.
  - AS – A number to identify a work task.
  - AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.
  Showing 20 of 107 values defined for element 7143 in D06B.
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 319 values defined for element 3055 in D06B.
4347 – Code qualifying the product identifier.
Type: an, Max Length: 3 (Required)
Valid Codes:
- 1 – Information which specifies and qualifies product identifications.
- 2 – The item number describes the potential substitute product.
- 3 – The given item number is the number of the product that substitutes another one.
- 4 – The given item number is the number of the original product substituted by another.
- 5 – The item number is for product identification.
- 6 – Product id of the product that will follow the one currently in production/trade.
- 7 – Product id of the predecessor of the product currently in production/trade.
- 8 – The given item number is the expired item number of the product. It has been replaced.
- 9 – Code indicating the deletion of a secondary identification.
- 10 – Identification of a defective part.
- 11 – Identification of a repaired part.
- 12 – Alternate number to identify the product.

IMD To describe an item in either an industry or free format. (Max 99)

C272 – To provide the characteristic of the item being described.
- 7081 – Code specifying the characteristic of an item.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Product in conformity with specifications.
  - 2 – Description of general product form.
  - 3 – Product without quality control when received.
  - 4 – Description of the finish required/available on the product.
  - 5 – Description of what the end use application of the product will be.
  - 6 – Description of the method of construction.
  - 7 – A drug name specially given in order that it may be freely used without legal restriction.
  - 8 – The characteristic of a product.
  - 9 – Description of a sub-product.
  - 10 – Specifies the direction of the grain of the product.
  - 11 – Item characteristic is described following Customs specifications.
  - 12 – Description of the type and/or process involved in making the product. E.g. in steel, description of the steelmaking process.
  - 13 – The degree of excellence of a thing.
  - 14 – Description of the surface condition (e.g. roughness) of the product.
  - 15 – Description of any heat treatment or annealing required/performed on the product.
  - 16 – A code identifying a size system, comprising a set of sizes.
  - 17 – Description of any special coating required/available on the product.
  - 18 – Description of any chemical surface treatment required/performed on the product.
  - 19 – Description of any mechanical surface treatment required/performed on the product.
  - 20 – Type of transfer capacity.
  Showing 20 of 189 values defined for element 7081 in D06B.
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 319 values defined for element 3055 in D06B.
C273 – Description of an item.
- 7009 – Code specifying an item.
  Type: an, Max Length: 17
  Valid Codes:
  - 1 – Displayed text is bold.
  - 2 – Displayed text is dimmed.
  - 3 – Displayed text is italicised.
  - 4 – Displayed text is normal.
  - 5 – Displayed text foreground and background colours are reversed.
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 319 values defined for element 3055 in D06B.
- 7008 – Free form description of an item.
  Type: an, Max Length: 256
- 7008 – Free form description of an item.
  Type: an, Max Length: 256
- 3453 – Code specifying the language name.
  Type: an, Max Length: 3
7077 – Code specifying the format of a description.
Type: an, Max Length: 3
Valid Codes:
- A – Long description of an item in free form.
- B – Description of an item in coded and free form text.
- C – Description of an item in coded format.
- D – Price look-up description of a product for point of sale receipts.
- E – Short description of an item in free form.
- F – Description of an item in free form text.
- S – Description of an item in a structured format.
- X – Description of an item in a coded and free text format.
7383 – Code specifying the surface or layer of an object.
Type: an, Max Length: 3
Valid Codes:
- 1S – The location is side one.
- 2S – The location is side two.
- AA – To indicate that the entity being specified is on the surface.
- AB – To indicate that the entity being specified is off the surface.
- AC – Specifies that the surface/layer/position being described is the soluble portion.
- AD – The surface or layer of the product being described is the opposite corners.
- AE – The surface or layer of the product being described are the corner diagonals.
- AF – The left-hand side (looking forward) of a ship, boat or aircraft.
- AG – The right-hand side (looking forward) of a ship, boat or aircraft.
- AH – Surface of a tooth directed toward the face and opposite the lingual surface.
- AI – Surface of the tooth relating to the cutting edge of the anterior teeth, incisors or canines.
- AJ – Surface of the tooth toward the back of the dental arch, or away from the midline.
- AK – Surface of the tooth pertaining to or around the cheek.
- AL – Surface of the tooth pertaining to the masticating surfaces of the posterior teeth.
- AM – Surface of the tooth pertaining to or around the tongue.
- AN – Surface of the tooth toward the midline of the dental arch.
- BC – The location is at the back of the cab.
- BS – The location is both sides.
- BT – The location is on the bottom.
- DF – The location is in the dual fuel tank positions.
Showing 20 of 33 values defined for element 7383 in D06B.

ALI To indicate that special conditions due to the origin, customs preference, fiscal or commercial factors are applicable. (Max 5)

3239 – To identify the country in which the goods have been produced or manufactured, according to criteria laid down for the application of the Customs tariff or quantitative restrictions, or any measure related to trade.
Type: an, Max Length: 3
9213 – Code specifying a type of duty regime.
Type: an, Max Length: 3
Valid Codes:
- 1 – Origin of the product is subject to EC/EFTA (European Commission European Free Trade Association).
- 2 – Origin of the product is subject to other preference agreement.
- 3 – Origin of the product is not subject to any preference.
- 8 – Origin of the product is excluded.
- 9 – Origin of the product is imposed.
4183 – Code specifying a special condition.
Type: an, Max Length: 3
Valid Codes:
- 1 – Item concerned is applicable to national preference calculation.
- 2 – Item concerned is applicable for settlement/payment discount calculation.
- 3 – Item concerned is not applicable for settlement/payment discount calculation.
- 4 – Urgent delivery of goods for which a reservation was made.
- 5 – Item concerned is not applicable for bonus calculation.
- 6 – Item concerned is applicable for bonus calculation.
- 7 – Item concerned is applicable for commission calculation.
- 8 – Item concerned is applicable for discount calculation.
- 9 – Item should be available freely within the European Economic Community.
- 10 – Item concerned is applicable for the overall settlement discount.
- 11 – The stated price is inclusive of excise.
- 12 – The stated price is inclusive of tax.
- 13 – The stated price is inclusive of duty.
- 14 – Item concerned is not applicable for commission calculation.
- 15 – Item concerned is not applicable for discount calculation.
- 16 – Item concerned is subject to embargo restriction.
- 17 – Item concerned is not subject to embargo restriction.
- 18 – Item concerned requires export declaration.
- 19 – Item concerned does not require export declaration.
- 20 – Item concerned is liable to import restrictions defined by relevant national authority.
Showing 20 of 188 values defined for element 4183 in D06B.
4183 – Code specifying a special condition.
Type: an, Max Length: 3
Valid Codes:
- 1 – Item concerned is applicable to national preference calculation.
- 2 – Item concerned is applicable for settlement/payment discount calculation.
- 3 – Item concerned is not applicable for settlement/payment discount calculation.
- 4 – Urgent delivery of goods for which a reservation was made.
- 5 – Item concerned is not applicable for bonus calculation.
- 6 – Item concerned is applicable for bonus calculation.
- 7 – Item concerned is applicable for commission calculation.
- 8 – Item concerned is applicable for discount calculation.
- 9 – Item should be available freely within the European Economic Community.
- 10 – Item concerned is applicable for the overall settlement discount.
- 11 – The stated price is inclusive of excise.
- 12 – The stated price is inclusive of tax.
- 13 – The stated price is inclusive of duty.
- 14 – Item concerned is not applicable for commission calculation.
- 15 – Item concerned is not applicable for discount calculation.
- 16 – Item concerned is subject to embargo restriction.
- 17 – Item concerned is not subject to embargo restriction.
- 18 – Item concerned requires export declaration.
- 19 – Item concerned does not require export declaration.
- 20 – Item concerned is liable to import restrictions defined by relevant national authority.
Showing 20 of 188 values defined for element 4183 in D06B.
4183 – Code specifying a special condition.
Type: an, Max Length: 3
Valid Codes:
- 1 – Item concerned is applicable to national preference calculation.
- 2 – Item concerned is applicable for settlement/payment discount calculation.
- 3 – Item concerned is not applicable for settlement/payment discount calculation.
- 4 – Urgent delivery of goods for which a reservation was made.
- 5 – Item concerned is not applicable for bonus calculation.
- 6 – Item concerned is applicable for bonus calculation.
- 7 – Item concerned is applicable for commission calculation.
- 8 – Item concerned is applicable for discount calculation.
- 9 – Item should be available freely within the European Economic Community.
- 10 – Item concerned is applicable for the overall settlement discount.
- 11 – The stated price is inclusive of excise.
- 12 – The stated price is inclusive of tax.
- 13 – The stated price is inclusive of duty.
- 14 – Item concerned is not applicable for commission calculation.
- 15 – Item concerned is not applicable for discount calculation.
- 16 – Item concerned is subject to embargo restriction.
- 17 – Item concerned is not subject to embargo restriction.
- 18 – Item concerned requires export declaration.
- 19 – Item concerned does not require export declaration.
- 20 – Item concerned is liable to import restrictions defined by relevant national authority.
Showing 20 of 188 values defined for element 4183 in D06B.
4183 – Code specifying a special condition.
Type: an, Max Length: 3
Valid Codes:
- 1 – Item concerned is applicable to national preference calculation.
- 2 – Item concerned is applicable for settlement/payment discount calculation.
- 3 – Item concerned is not applicable for settlement/payment discount calculation.
- 4 – Urgent delivery of goods for which a reservation was made.
- 5 – Item concerned is not applicable for bonus calculation.
- 6 – Item concerned is applicable for bonus calculation.
- 7 – Item concerned is applicable for commission calculation.
- 8 – Item concerned is applicable for discount calculation.
- 9 – Item should be available freely within the European Economic Community.
- 10 – Item concerned is applicable for the overall settlement discount.
- 11 – The stated price is inclusive of excise.
- 12 – The stated price is inclusive of tax.
- 13 – The stated price is inclusive of duty.
- 14 – Item concerned is not applicable for commission calculation.
- 15 – Item concerned is not applicable for discount calculation.
- 16 – Item concerned is subject to embargo restriction.
- 17 – Item concerned is not subject to embargo restriction.
- 18 – Item concerned requires export declaration.
- 19 – Item concerned does not require export declaration.
- 20 – Item concerned is liable to import restrictions defined by relevant national authority.
Showing 20 of 188 values defined for element 4183 in D06B.
4183 – Code specifying a special condition.
Type: an, Max Length: 3
Valid Codes:
- 1 – Item concerned is applicable to national preference calculation.
- 2 – Item concerned is applicable for settlement/payment discount calculation.
- 3 – Item concerned is not applicable for settlement/payment discount calculation.
- 4 – Urgent delivery of goods for which a reservation was made.
- 5 – Item concerned is not applicable for bonus calculation.
- 6 – Item concerned is applicable for bonus calculation.
- 7 – Item concerned is applicable for commission calculation.
- 8 – Item concerned is applicable for discount calculation.
- 9 – Item should be available freely within the European Economic Community.
- 10 – Item concerned is applicable for the overall settlement discount.
- 11 – The stated price is inclusive of excise.
- 12 – The stated price is inclusive of tax.
- 13 – The stated price is inclusive of duty.
- 14 – Item concerned is not applicable for commission calculation.
- 15 – Item concerned is not applicable for discount calculation.
- 16 – Item concerned is subject to embargo restriction.
- 17 – Item concerned is not subject to embargo restriction.
- 18 – Item concerned requires export declaration.
- 19 – Item concerned does not require export declaration.
- 20 – Item concerned is liable to import restrictions defined by relevant national authority.
Showing 20 of 188 values defined for element 4183 in D06B.

GIR To specify a related set of identification numbers. (Max 5)

Elements and codes as defined at GIR above.

FTX To provide free form or coded text information. (Max 5)

Elements and codes as defined at FTX above.

PAC To describe the number and type of packages/physical units. (Max 99)

Elements and codes as defined at PAC above.

DTM To specify date, and/or time, or period. (Max 9)

Elements and codes as defined at DTM above.

Group SG8 (Max 9)

RFF To specify a reference. (Max 1) Required

Elements and codes as defined at RFF above.

DTM To specify date, and/or time, or period. (Max 1)

Elements and codes as defined at DTM above.

Group SG9 (Max 9)

TDT To specify information regarding the transport such as mode of transport, means of transport, its conveyance reference number and the identification of the means of transport. (Max 1) Required

C220 – Method of transport code or name. Code preferred.
- 8067 – Code specifying the name of a mode of transport.
  Type: an, Max Length: 3
- 8066 – Name of a mode of transport.
  Type: an, Max Length: 17
C001 – Code and/or name identifying the type of means of transport.
- 8179 – Code specifying the means of transport.
  Type: an, Max Length: 8
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 319 values defined for element 3055 in D06B.
- 8178 – Free form description of the means of transport.
  Type: an, Max Length: 17
C040 – Identification of a carrier by code and/or by name. Code preferred.
- 3127 – To identify a carrier.
  Type: an, Max Length: 17
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 319 values defined for element 3055 in D06B.
- 3126 – Name of a carrier.
  Type: an, Max Length: 35
C401 – To provide details of reason for, and responsibility for, use of transportation other than normally utilized.
- 8457 – Code specifying the reason for excess transportation.
  Type: an, Max Length: 3 (Required)
  Valid Codes:
  - A – The reason for the excess transportation is due to special rail car order, schedule increase forecast change.
  - B – The reason for the excess transportation is due to engineering change or late release.
  - C – The reason for the excess transportation is due to special rail car order, schedule increase forecast change specification (schedule) error/overbuilding.
  - D – The reason for the excess transportation is due to shipment tracing delay.
  - E – The reason for the excess transportation is due to plant inventory loss.
  - F – The reason for the excess transportation is due to building ahead of schedule.
  - G – The reason for the excess transportation is due to vendor behind schedule.
  - H – The reason for the excess transportation is due to failure to include costs in last shipment.
  - I – The reason for the excess transportation is due to carrier loss claim.
  - J – The reason for the excess transportation is due to transportation failure.
  - K – The reason for the excess transportation is due to insufficient weight for carload.
  - L – The reason for the excess transportation is due to reject or discrepancy.
  - M – The reason for the excess transportation is due to transportation delay.
  - N – The reason for the excess transportation is due to lack of railcar of railroad equipment.
  - P – The reason for the excess transportation is due to releasing error.
  - R – The reason for the excess transportation is due to record error or cate reported discrepancy report.
  - T – The reason for the excess transportation is due to common or peculiar part schedule increase.
  - U – The reason for the excess transportation is due to alternative supplier shipping for responsible supplier.
  - V – The reason for the excess transportation is due to direct schedule or locally controlled.
  - W – The reason for the excess transportation is due to purchasing waiver approved.
  Showing 20 of 23 values defined for element 8457 in D06B.
- 8459 – Code specifying the responsibility for excess transportation.
  Type: an, Max Length: 3 (Required)
  Valid Codes:
  - B – The responsibility for excess transportation is with the material release issuer.
  - S – The responsibility for excess transportation is with the supplier authority.
  - X – The responsibility for the excess transportation is to be determined.
  - ZZZ – A code assigned within a code list to be used on an interim basis and as defined among trading partners until a precise code can be assigned to the code list.
- 7130 – To identify the authorisation to ship issued by the customer.
  Type: an, Max Length: 17
C222 – Code and/or name identifying the means of transport.
- 8213 – Identifies the name of the transport means.
  Type: an, Max Length: 35
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 319 values defined for element 3055 in D06B.
- 8212 – Name identifying a means of transport.
  Type: an, Max Length: 70
- 8453 – Code specifying the nationality of a means of transport.
  Type: an, Max Length: 3
8051 – Code qualifying a specific stage of transport.
Type: an, Max Length: 3 (Required)
Valid Codes:
- 1 – Transport by which goods are moved from or to the frontier, or between inland points.
- 2 – Point by which the means of transport are presumed to have left the statistical territory of despatch or to have entered the statistical territory of arrival.
- 3 – Transport by which goods are moved to the place of arrival.
- 10 – Transport by which the goods are moved prior to their main carriage transport.
- 11 – Transport by which goods are moved to the Customs frontier.
- 12 – Transport by which goods are moved from the place of departure.
- 13 – Transport by which goods are moved at the place of destination.
- 15 – The fourth carrier of the ordered transport.
- 16 – The fifth carrier of the ordered transport.
- 17 – The sixth carrier of the ordered transport.
- 18 – The seventh carrier of the ordered transport.
- 19 – The eighth carrier of the ordered transport.
- 20 – The primary stage in the movement of cargo from the point of origin to the intended destination.
- 21 – The first carrier of the ordered transport when more than one carrier is involved.
- 22 – The second carrier of the ordered transport when more than one carrier is involved.
- 23 – The third carrier of the ordered transport when more than one carrier is involved.
- 24 – Transport by which goods are moved via an inland body of water.
- 25 – Carrier responsible from the point of origin to the final delivery destination.
- 26 – Second transport by which the goods are moved prior to their main carriage transport.
- 27 – The transport by which the goods are moved to the place of acceptance.
Showing 20 of 26 values defined for element 8051 in D06B.
8028 – To identify a journey of a means of transport.
Type: an, Max Length: 17
8101 – Code specifying the direction of transport.
Type: an, Max Length: 3
Valid Codes:
- BS – The transport from the buyer to the seller.
- SB – The transport from the seller to the buyer.
- SC – The transport from the subcontractor to the seller.
- SD – The transport from the seller to the drop ship designated location.
- SF – The transport from the seller to the freight forwarder.
- SS – The transport from the seller to the subcontractor.
- ST – Cargo is transferred from the main carriage or mother vessel to a lighter.
- SU – Cargo is transferred from the lighter vessel to a main carriage or mother vessel.
- ZZZ – A code assigned within a code list to be used on an interim basis and as defined among trading partners until a precise code can be assigned to the code list.
8281 – Code indicating the ownership of a means of transport.
Type: an, Max Length: 3
Valid Codes:
- 1 – The owner of the transported goods is also the owner of the means of transport or rented it for this transport.
- 2 – The owner of the transported goods does not own the means of transport or has not rented it for this transport.
- 3 – A code indicating privately owned transport.

TMD To specify operational transport movement details for a goods item or equipment (which may differ from the contractual conditions). (Max 1)

C219 – Description of type of service for movement of cargo.
- 8335 – Code specifying a type of movement.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Defines the movement of general cargo not carried in ISO standard containers.
  - 2 – Defines the movement of cargo packed in and unpacked from containers by the carrier on behalf of the shipper/consignee. 'LCL' means Less than Container Load.
  - 3 – Defines the movement of cargo packed by the shipper or shipper's agent and unpacked by the consignee or consignee's agent. 'FCL' means Full Container Load.
  - 4 – Defines the movement of cargo packed by the shipper or shipper's agent and unpacked by the carrier. 'FCL' means Full Container Load. 'LCL' means Less than Container Load.
  - 5 – Defines the movement of cargo packed by the carrier and unpacked by the consignee or consignee's agent. 'LCL' means Less than Container Load. 'FCL' means Full Load.
  - 6 – A movement of multiple shipments to a single destination.
  - 7 – A movement of material by parcel post.
  - 8 – A movement of material by expedited truck.
  - 9 – A movement of material by the means determined by the consignor.
  - 10 – A movement of material by a private parcel service.
  - 11 – Cargo packed in a unit by the shipper at point of origin and unpacked by consignee at final destination.
  - 12 – Cargo packed in a unit by the shipper at point of origin and unpacked at the carrier's inland facility between the ship's point of discharge and the final destination.
  - 13 – Cargo packed in a unit by the shipper at point of origin and unpacked by carrier at ship's point of discharge (pier).
  - 14 – A movement of material by chartered aircraft.
  - 15 – A movement of material by air express service.
  - 16 – A movement of material from multiple origins to a single destination utilizing a single carrier and a single freight bill.
  - 17 – A movement of material on a truck that is not full.
  - 18 – A movement of material by a trailer on a railcar.
  - 19 – A movement of material transported by the consignee.
  - 20 – A movement of material to the consignee via rail.
  Showing 20 of 33 values defined for element 8335 in D06B.
- 8334 – Free form description of a type of movement.
  Type: an, Max Length: 35
8332 – Free form description of the equipment plan.
Type: an, Max Length: 26
8341 – Code specifying the arrangement for the haulage of goods.
Type: an, Max Length: 3
Valid Codes:
- 1 – Haulage arranged by carrier.
- 2 – Haulage arranged by merchant (shipper, consignee, or their agent).

Group SG10 (Max 99)

LOC To identify a place or a location and/or related locations. (Max 1) Required

Elements and codes as defined at LOC above.

Group SG11 (Max 5)

CTA To identify a person or a department to whom communication should be directed. (Max 1) Required

Elements and codes as defined at CTA above.

COM To identify a communication number of a department or a person to whom communication should be directed. (Max 5)

Elements and codes as defined at COM above.

Group SG12 (Max 999)

QTY To specify a pertinent quantity. (Max 1) Required

C186 – Quantity information in a transaction, qualified when relevant.
- 6063 – Code qualifying the type of quantity.
  Type: an, Max Length: 3 (Required)
  Valid Codes:
  - 1 – Individually separated and distinct quantity.
  - 2 – Quantity relevant for charge.
  - 3 – Quantity accumulated.
  - 4 – Interest for overdrawing the account.
  - 5 – The dosage of active ingredient per unit.
  - 6 – The number of entities that audit accounts.
  - 7 – The number of branch locations being leased by an entity.
  - 8 – Quantity of goods which the customer requires the supplier to have in inventory and which may be inspected by the customer if desired.
  - 9 – The number of branch locations owned by an entity.
  - 10 – The number of judgements registered against an entity.
  - 11 – Part of the whole quantity.
  - 12 – Quantity despatched by the seller.
  - 13 – The number of liens registered against an entity.
  - 14 – The number of animals kept for use or profit.
  - 15 – The number of cheques returned due to insufficient funds.
  - 16 – The number of stolen cheques.
  - 17 – The total quantity of a product on hand at a location. This includes as well units awaiting return to manufacturer, units unavailable due to inspection procedures and undamaged stock available for despatch, resale or use.
  - 18 – Quantity previously referenced.
  - 19 – The number of security shares issued and for which full payment has been made.
  - 20 – Quantity not usable.
  Showing 20 of 470 values defined for element 6063 in D06B.
- 6060 – Alphanumeric representation of a quantity.
  Type: an, Max Length: 35 (Required)
- 6411 – Code specifying the unit of measurement.
  Type: an, Max Length: 8

SCC To specify scheduling conditions. (Max 1)

C329 – Shipment, delivery or production interval pattern and timing.
- 2013 – Code specifying the rate of recurrence.
  Type: an, Max Length: 3
  Valid Codes:
  - A – Code defining a yearly forecast.
  - B – Flexible frequency scheduling based on continuous consumption of items.
  - C – Flexible frequency scheduling based on synchronous consumption of items.
  - D – Flexible frequency according to planning process.
  - E – Flexible frequency scheduling based on replenishment of the consumption of items.
  - F – Code defining a forecasted usage that is planned between two defined dates.
  - G – Ten day interval.
  - H – Half month interval.
  - J – Scheduling based on just-in-time of the need.
  - M – Code defining a forecast by calendar month(s).
  - Q – Code defining a forecast by calendar quarter(s). (Jan- Mar, Apr-Jun, Jul-Sep, Oct-Dec).
  - S – Code defining a forecast for the first six months of the year or the second six months of the year.
  - T – Code defining a forecast for four week intervals.
  - W – Code defining a forecast for weekly intervals.
  - Y – Code defining a schedule by day.
  - ZZZ – Code reserved for special trading partner requirements when pre-defined codes do not exist.
- 2015 – Code specifying a despatch pattern.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Despatch has or will occur in the first week of the month.
  - 2 – Despatch has or will occur in the second week of the month.
  - 3 – Despatch has or will occur in the third week of the month.
  - 4 – Despatch has or will occur in the fourth week of the month.
  - 5 – Despatch has or will occur in the fifth week of the month.
  - 6 – Despatch has or will occur in the first and third week of the month.
  - 7 – Despatch has or will occur in the second and fourth week of the month.
  - 10 – Despatch has or will occur between Monday and Friday (inclusive).
  - 11 – Despatch has or will occur between Monday and Saturday (inclusive).
  - 12 – Despatch has or will occur between Monday and Sunday (inclusive).
  - 13 – Despatch has or will occur on a Monday.
  - 14 – Despatch has or will occur on a Tuesday.
  - 15 – Despatch has or will occur on a Wednesday.
  - 16 – Despatch has or will occur on a Thursday.
  - 17 – Despatch has or will occur on a Friday.
  - 18 – Despatch has or will occur on a Saturday.
  - 19 – Despatch has or will occur on a Sunday.
  - 20 – At the earliest date/time within the defined lead time.
  - 21 – Despatch has or will occur as directed.
  - 22 – Shipments/deliveries are anticipated weekly within the month specified.
  Showing 20 of 48 values defined for element 2015 in D06B.
- 2017 – Code specifying a set of dates/times within a despatch pattern.
  Type: an, Max Length: 3
  Valid Codes:
  - A – The first working period as defined by an entity.
  - B – A subsequent working period as defined by an entity, that follows 1st shift.
  - C – A subsequent working period as defined by an entity, that follows 2nd shift.
  - D – Ante Meridiem (forenoon).
  - E – Post Meridiem (afternoon).
  - F – Shipment/delivery instruction will be provided in an independent communication session.
  - G – The production period that a product will be built such as 1st shift or 3rd shift.
  - H – Shipment/deliveries will be specified by a continuous time clock .
  - Y – Used to cancel or override a previous pattern.
  - ZZZ – Despatch pattern timing according to agreement.
4017 – Code specifying the level of commitment to a delivery plan.
Type: an, Max Length: 3 (Required)
Valid Codes:
- 1 – Indicates that the scheduling information is a firm commitment.
- 2 – Authorizes the supplier to start the manufacturing of goods.
- 3 – Authorizes the manufacturer to order material required for manufacturing specified goods.
- 4 – An estimate of future requirements based on trends and actual information.
- 5 – Part of a consignment which was not delivered when the original delivery was made.
- 6 – Capacity is available to meet the requested scheduling demands.
- 7 – All related schedule information refer to a promotion.
- 8 – All related schedule information refers to a special demand.
- 9 – The user can interpret the meaning of the values from information exchanged previously.
- 10 – Indicates that the scheduling information is for immediate execution.
- 11 – Initial products required in advance of the normal production process.
- 12 – An estimate of future requirements.
- 13 – The possibility and magnitude of a schedule fluctuation.
- 14 – The usual amount that a manufacturing facility will use over a specified duration.
- 15 – Initial confirmation of a material requirement.
- 16 – The highest attainable amount.
- 17 – The maximum amount that the process was designed to accommodate.
- 18 – The anticipated amount that the process was designed to accommodate over a specific period of time.
- 19 – The preliminary version of a product or service.
- 20 – Product level that is set aside as protection in the event of a work stoppage.
Showing 20 of 25 values defined for element 4017 in D06B.
4493 – Code specifying a delivery instruction.
Type: an, Max Length: 3
Valid Codes:
- AA – A delivery requirement indicating the items should not be shipped without specific authorization.
- BK – Partial shipping is allowed. The rest of the order should be delivered as soon as possible.
- CD – An order or the rest of an order should be cancelled if not delivered at specified date.
- DA – A requirement that an order should not be delivered after a specified date/time.
- DB – A requirement that an order should not be delivered before a specified date/time.
- DD – An order should be delivered exactly on specified date.
- IS – A substitute item may be delivered, if the ordered item is not available.
- P1 – No specified date/time for delivery.
- P2 – The order should be delivered as soon as possible.
- SC – The order should be delivered only complete, not partial.
- SF – Partial shipping of an order is allowed, if the total freight rate do not increase.
- SP – Partial shipping is allowed. The rest of the order should be cancelled.

DTM To specify date, and/or time, or period. (Max 9)

Elements and codes as defined at DTM above.

Group SG13 (Max 99)

RFF To specify a reference. (Max 1) Required

Elements and codes as defined at RFF above.

DTM To specify date, and/or time, or period. (Max 1)

Elements and codes as defined at DTM above.

Group SG14 (Max 9)

PRI To specify price information. (Max 1) Required

C509 – Identification of price type, price and related details.
- 5125 – Code qualifying a price.
  Type: an, Max Length: 3 (Required)
  Valid Codes:
  - AAA – The price stated is the net price including allowances/ charges. Allowances/charges may be stated for information only.
  - AAB – The price stated is the gross price to which allowances/ charges must be applied.
  - AAC – The price does not include the allowances and charges, but includes the taxes.
  - AAD – Average selling price of a product.
  - AAE – The price stated is for information purposes only and excludes all allowances and charges. Taxes however are included in the price.
  - AAF – The price stated is for information purposes only and excludes all allowances, charges and taxes.
  - AAG – A code to indicate that the price described is an additive component of the total price.
  - CAL – The price stated is the price for the calculation of the line item amount.
  - INF – The price is provided for information.
  - INV – Referenced price taken from an invoice.
  - ZZZ – A code assigned within a code list to be used on an interim basis and as defined among trading partners until a precise code can be assigned to the code list.
- 5118 – To specify a price.
  Type: n, Max Length: 15
- 5375 – Code specifying the type of price.
  Type: an, Max Length: 3
  Valid Codes:
  - AA – Price authorized to be charged in the event of an order being cancelled.
  - AB – To indicate that the price applies per ton.
  - AC – A code to identify the price when the minimum number is purchased.
  - AD – A code to identify a price for the export market.
  - AE – A code identifying the price for a specific range of purchase quantities.
  - AI – The price is referring to the active ingredient.
  - AQ – The price is referring to the measured quantity.
  - CA – Code specifying the catalogue price.
  - CT – Code specifying the contract price.
  - CU – The price is referring to the consumer unit.
  - DI – Code specifying the distributor price.
  - EC – Price registered at European Commission Steel and Carbon office (DG III).
  - NW – Code specifying the net weight price.
  - PC – Code specifying the catalogue price.
  - PE – Code specifying the price per item.
  - PK – Code specifying the price per kilogram.
  - PL – Code specifying the price per litre.
  - PT – Code specifying the price per tonne.
  - PU – Code specifying the price per specified unit.
  - PV – Code specifying a provisional price.
  Showing 20 of 28 values defined for element 5375 in D06B.
- 5387 – Code identifying pricing specification.
  Type: an, Max Length: 3
  Valid Codes:
  - AAA – Code identifying a reference price.
  - AAB – Code specifying that the price is inclusive of tax.
  - AAC – The suggested retail price as suggested or determined by the party purchasing the goods.
  - AAD – The charges imposed by the ocean transportation industry above and beyond the basic freight.
  - AAE – Not subject to escalation or adjustment.
  - AAF – Subject to increase or development by successive stages.
  - AAG – Code specifying that the price is subject to adjustment.
  - AAH – Subject to increase or development by successive stages and price adjustment.
  - AAI – Code specifying that the fluctuation conditions are not identified.
  - AAJ – Firm price for specified work.
  - AAK – A price valid from an effective date/time/period.
  - AAL – A price valid prior to an effective date/time/period of a new price.
  - AAM – To indicate that the given price applies per week.
  - AAN – Price can be obtained on request from seller.
  - AAO – The price given is the price of the item without packaging.
  - AAP – Discount price available to all customers except the retail customer.
  - AAQ – Price which will remain unchanged for a given time period.
  - AAR – The per unit cost of referenced material based on a given quotation for that material.
  - AAS – The labour component of the per-unit item price.
  - AAT – The transport component of the per-unit item price.
  Showing 20 of 103 values defined for element 5387 in D06B.
- 5284 – To specify the basis for a unit price.
  Type: n, Max Length: 9
- 6411 – Code specifying the unit of measurement.
  Type: an, Max Length: 8
5213 – Code specifying the price change operation for a sub- line item.
Type: an, Max Length: 3
Valid Codes:
- A – Price is to be added to the base line unit price.
- I – Price is included in the base line unit price.
- S – Price is to be subtracted from the base line unit price.

CUX To specify currencies used in the transaction and relevant details for the rate of exchange. (Max 1)

C504 – The usage to which a currency relates.
- 6347 – Code qualifying the usage of a currency.
  Type: an, Max Length: 3 (Required)
  Valid Codes:
  - 1 – The currency in which charges are to be paid.
  - 2 – The currency applicable to amounts stated. It may have to be converted.
  - 3 – The currency which should be used to the target destination of the transaction.
  - 4 – Currency applicable to amounts stated in a transport document/message.
  - 5 – Currency on which the calculation is based.
  - 6 – Additional currency the message recipient needs for information purposes. The actual message amount(s) is/are not based upon this currency.
  - 7 – Currency in which the account is held.
- 6345 – Code specifying a monetary unit.
  Type: an, Max Length: 3
- 6343 – Code qualifying the type of currency.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – The currency of the monetary unit involved in the transaction for customs valuation.
  - 2 – The currency of the monetary unit involved in the transaction for insurance purposes.
  - 3 – The currency of the local monetary unit.
  - 4 – The currency of the monetary unit used for calculation in an invoice.
  - 5 – The currency of the monetary unit of an account.
  - 6 – The currency of the monetary unit to be converted from.
  - 7 – The currency of the monetary unit to be converted into.
  - 8 – The currency of the monetary unit used in a price list.
  - 9 – The currency of the monetary unit used in an order.
  - 10 – The currency of the monetary unit used for pricing purposes.
  - 11 – The currency of the monetary unit used for payment.
  - 12 – The currency of the monetary unit used in a quotation.
  - 13 – The currency of the local monetary unit at recipient's location.
  - 14 – The currency of the monetary unit normally used by the supplier.
  - 15 – The currency of the local monetary unit at sender's location.
  - 16 – The currency as per tariff.
  - 17 – The currency in which the charges are calculated.
  - 18 – The currency in which tax amounts are due or have been paid.
- 6348 – To specify the value of the multiplication factor used in expressing currency units.
  Type: n, Max Length: 4
C504 – The usage to which a currency relates.
- 6347 – Code qualifying the usage of a currency.
  Type: an, Max Length: 3 (Required)
  Valid Codes:
  - 1 – The currency in which charges are to be paid.
  - 2 – The currency applicable to amounts stated. It may have to be converted.
  - 3 – The currency which should be used to the target destination of the transaction.
  - 4 – Currency applicable to amounts stated in a transport document/message.
  - 5 – Currency on which the calculation is based.
  - 6 – Additional currency the message recipient needs for information purposes. The actual message amount(s) is/are not based upon this currency.
  - 7 – Currency in which the account is held.
- 6345 – Code specifying a monetary unit.
  Type: an, Max Length: 3
- 6343 – Code qualifying the type of currency.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – The currency of the monetary unit involved in the transaction for customs valuation.
  - 2 – The currency of the monetary unit involved in the transaction for insurance purposes.
  - 3 – The currency of the local monetary unit.
  - 4 – The currency of the monetary unit used for calculation in an invoice.
  - 5 – The currency of the monetary unit of an account.
  - 6 – The currency of the monetary unit to be converted from.
  - 7 – The currency of the monetary unit to be converted into.
  - 8 – The currency of the monetary unit used in a price list.
  - 9 – The currency of the monetary unit used in an order.
  - 10 – The currency of the monetary unit used for pricing purposes.
  - 11 – The currency of the monetary unit used for payment.
  - 12 – The currency of the monetary unit used in a quotation.
  - 13 – The currency of the local monetary unit at recipient's location.
  - 14 – The currency of the monetary unit normally used by the supplier.
  - 15 – The currency of the local monetary unit at sender's location.
  - 16 – The currency as per tariff.
  - 17 – The currency in which the charges are calculated.
  - 18 – The currency in which tax amounts are due or have been paid.
- 6348 – To specify the value of the multiplication factor used in expressing currency units.
  Type: n, Max Length: 4
5402 – To specify the rate at which one specified currency is expressed in another specified currency.
Type: n, Max Length: 12
6341 – To identify an exchange rate currency market.
Type: an, Max Length: 3
Valid Codes:
- AAA – The currency exchange rate is set by the Paris exchange.
- AAB – The currency exchange rate is set by the Central Bank of Colombia.
- AMS – The currency exchange rate is set by the Amsterdam exchange.
- ARG – Argentina exchange.
- AST – The currency exchange rate is set by the Australian exchange.
- AUS – Wiener Boersenkammer.
- BEL – Commission de la Bourse Bruxelles.
- CAN – The currency exchange rate is set by the Toronto exchange.
- CAR – The currency exchange rate is set by a written or spoken agreement between two or more parties.
- CIE – Currency rates published by the US Customs Information Exchange, 6 WTC, New York NY 10048-0945, USA.
- DEN – Koebenhavns Fondsboers.
- ECR – The currency exchange rate is set for a length of time by the European Community.
- FIN – The currency exchange rate is set by the Helsinki exchange.
- FRA – The currency exchange rate is set by the Frankfurt exchange.
- IMF – The currency exchange rate is set by the International Monetary Fund.
- LNF – The currency exchange rate is set by the London exchange at the first closing.
- LNS – The currency exchange rate is set by the London exchange at the second closing.
- MIL – The currency exchange rate is set by the Milan exchange.
- NOR – The currency exchange rate is set by the Oslo exchange.
- NYC – The currency exchange rate is set by the New York exchange.
Showing 20 of 24 values defined for element 6341 in D06B.

DTM To specify date, and/or time, or period. (Max 9)

Elements and codes as defined at DTM above.

UNT Unknown Segment (Max 1) Required

Sources and further reading

GS1 EDI standards GS1 guidance on EDI standards used for supply-chain document exchange.
UNECE introduction to UN/EDIFACT United Nations guidance on UN/EDIFACT for structured business data exchange.
X12 EDI standards Official X12 standards body for North American EDI transaction standards.
OpenPeppol post-award specifications OpenPeppol documentation for e-procurement and e-invoicing specifications.

UN/EDIFACT D06B DELJIT Message

What the DELJIT message is for

Who exchanges it

Segments that carry the parts people get wrong

Jump to Segment

UNH Unknown Segment (Max 1) Required

BGM To indicate the type and function of a message and to transmit the identifying number. (Max 1) Required

DTM To specify date, and/or time, or period. (Max 10) Required

FTX To provide free form or coded text information. (Max 5)

Group SG1 (Max 10)

RFF To specify a reference. (Max 1) Required

DTM To specify date, and/or time, or period. (Max 1)

Group SG2 (Max 20)

NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required

LOC To identify a place or a location and/or related locations. (Max 10)

FTX To provide free form or coded text information. (Max 5)

Group SG3 (Max 5)

CTA To identify a person or a department to whom communication should be directed. (Max 1) Required

COM To identify a communication number of a department or a person to whom communication should be directed. (Max 5)

Group SG4 (Max 9999) Required

SEQ To provide details relating to the sequence. (Max 1) Required

DTM To specify date, and/or time, or period. (Max 5)

GIR To specify a related set of identification numbers. (Max 99)

LOC To identify a place or a location and/or related locations. (Max 5)

Group SG5 (Max 5)

PAC To describe the number and type of packages/physical units. (Max 1) Required

Group SG6 (Max 999)

PCI To specify markings and labels on individual packages or physical units. (Max 1) Required

GIN To give specific identification numbers, either as single numbers or ranges. (Max 10)

Group SG7 (Max 9999)

LIN To identify a line item and configuration. (Max 1) Required

PIA To specify additional or substitutional item identification codes. (Max 10)

IMD To describe an item in either an industry or free format. (Max 99)

ALI To indicate that special conditions due to the origin, customs preference, fiscal or commercial factors are applicable. (Max 5)

GIR To specify a related set of identification numbers. (Max 5)

FTX To provide free form or coded text information. (Max 5)

PAC To describe the number and type of packages/physical units. (Max 99)

DTM To specify date, and/or time, or period. (Max 9)

Group SG8 (Max 9)

RFF To specify a reference. (Max 1) Required

DTM To specify date, and/or time, or period. (Max 1)

Group SG9 (Max 9)

TDT To specify information regarding the transport such as mode of transport, means of transport, its conveyance reference number and the identification of the means of transport. (Max 1) Required

TMD To specify operational transport movement details for a goods item or equipment (which may differ from the contractual conditions). (Max 1)

Group SG10 (Max 99)

LOC To identify a place or a location and/or related locations. (Max 1) Required

Group SG11 (Max 5)

CTA To identify a person or a department to whom communication should be directed. (Max 1) Required

COM To identify a communication number of a department or a person to whom communication should be directed. (Max 5)

Group SG12 (Max 999)

QTY To specify a pertinent quantity. (Max 1) Required

SCC To specify scheduling conditions. (Max 1)

DTM To specify date, and/or time, or period. (Max 9)

Group SG13 (Max 99)

RFF To specify a reference. (Max 1) Required

DTM To specify date, and/or time, or period. (Max 1)

Group SG14 (Max 9)

PRI To specify price information. (Max 1) Required

CUX To specify currencies used in the transaction and relevant details for the rate of exchange. (Max 1)

DTM To specify date, and/or time, or period. (Max 9)

UNT Unknown Segment (Max 1) Required

Sources and further reading