Try it now Login

UN/EDIFACT D98B SSIMOD Message

Review the SSIMOD segment sequence, mandatory fields, repeat counts and valid codes for the D98B EDIFACT directory.

Jump to Segment
UNH
BGM
DTM
GIS
RFF
DTM
IND
FTX
PNA
ADR
GIR
NAT
DOC
ATT
DTM
ADR
PDI
DTM
AUT
DTM
UNT
UNH Unknown Segment (Max 1) Required
BGM To indicate the type and function of a message and to transmit the identifying number. (Max 1) Required
  • C002 – Identification of a type of document/message by code or name. Code preferred.
    • 1001 – Document/message identifier expressed in code.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Certificate providing the values of an analysis.
      • 2 – Certificate certifying the conformity to predefined definitions.
      • 3 – Certificate certifying the quality of goods, services etc.
      • 4 – Report providing the results of a test session.
      • 5 – Report specifying the performance values of products.
      • 6 – Report providing specification values of products.
      • 7 – Reports on events during production process.
      • 8 – Self explanatory.
      • 9 – Self explanatory.
      • 10 – Document/message providing basic data concerning a party.
      • 11 – A pre-approved document relating to federal label approval requirements.
      • 12 – Certificate certifying a specific quality of agricultural products.
      • 13 – Document/message which evidences the transport of goods by post (e.g. mail, parcel, etc.).
      • 14 – Certificate certifying the weight of goods.
      • 15 – Document/message specifying the weight of goods.
      • 16 – Document by means of which the documentary credit applicant specifies the conditions for the certificate and by whom the certificate is to be issued.
      • 17 – Document identifying goods in which the issuing authority expressly certifies that the goods originate in a specific country or part of, or group of countries. It also states the price and/or cost of the goods with the purpose of determining the customs origin.
      • 18 – Specific form of transit declaration issued by the exporter (movement certificate).
      • 19 – Certificate certifying the quantity of goods, services etc.
      • 20 – Usage of QALITY-message.

      Showing 20 of 494 values defined for element 1001 in D98B.

    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 143 values defined for element 1131 in D98B.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 223 values defined for element 3055 in D98B.

    • 1000 – Plain language identifier specifying the function of a document/message.
      Type: an, Max Length: 35
  • C106 – Identification of a document/message by its number and eventually its version or revision.
    • 1004 – Reference number assigned to the document/message by the issuer.
      Type: an, Max Length: 35
    • 1056 – To specify the version number or name of an object.
      Type: an, Max Length: 9
    • 1060 – To specify a revision number.
      Type: an, Max Length: 6
  • 1225 – Code indicating the function of the message.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – Message cancelling a previous transmission for a given transaction.
    • 2 – Message containing items (e.g. line items, goods items, Customs items, equipment items) to be added to a previously sent message.
    • 3 – Message containing items (e.g. line items, goods items, Customs items, equipment items) to be deleted from a previously sent message.
    • 4 – Message containing items (e.g. line items, goods items, Customs items, equipment items) to be changed in a previously sent message.
    • 5 – Message replacing a previous message.
    • 6 – Message confirming the details of a previous transmission where such confirmation is required or recommended under the terms of a trading partner agreement.
    • 7 – The message is a duplicate of a previously generated message.
    • 8 – Description to be provided.
    • 9 – Initial transmission related to a given transaction.
    • 10 – Message whose reference number is not filed.
    • 11 – Message responding to a previous message or document.
    • 12 – Message indicating that the referenced message was received but not yet processed.
    • 13 – Self explanatory.
    • 14 – Self explanatory.
    • 15 – Repeated message transmission for reminding purposes.
    • 16 – Message content is a proposal.
    • 17 – Referenced transaction cancelled, reissued message will follow.
    • 18 – New issue of a previous message (maybe cancelled).
    • 19 – Change information submitted by buyer but initiated by seller.
    • 20 – Message to replace the heading of a previous message.

    Showing 20 of 59 values defined for element 1225 in D98B.

  • 4343 – Code specifying the type of acknowledgment required or transmitted.
    Type: an, Max Length: 3
    Valid Codes:
    • AA – Receiver of the payment message needs to return a debit advice in response to the payment message.
    • AB – Indicates that an acknowledgement relating to receipt of message is required.
    • AC – Acknowledge complete including changes.
    • AD – Acknowledge complete without changes.
    • AF – The sender wishes to receive both a Debit Advice and an acknowledgement of receipt for a payment message.
    • AG – Authentication, by a party, of a document established for him by another party.
    • AI – Acknowledgement of changes only is required.
    • AJ – Indication that the referenced offer or transaction (e.g. cargo booking or quotation request) is being dealt with.
    • AP – Indication that the referenced offer or transaction (e.g., cargo booking or quotation request) has been accepted.
    • AQ – The sender of the message expects a response.
    • AR – Documentary credit collection forwarded directly.
    • AS – The receiver of the message is to acknowledge receipt of the message and sent a credit advice for each credit.
    • CA – Indication that the referenced offer or transaction (e.g., cargo booking or quotation request) has been accepted under conditions indicated in this message.
    • CO – Indication that the message contains the physical measurements on which the charges will be based.
    • NA – Self explanatory.
    • RE – Indication that the referenced offer or transaction (e.g., cargo booking or quotation request) is not accepted.
DTM To specify date, and/or time, or period. (Max 1)
  • C507 – Date and/or time, or period relevant to the specified date/time/period type.
    • 2005 – Code giving specific meaning to a date, time or period.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • 2 – Date on which buyer requests goods to be delivered.
      • 3 – [2376] Date when a Commercial Invoice is issued.
      • 4 – [2010] Date when an order is issued.
      • 7 – Date and/or time at which specified event or document becomes effective.
      • 8 – Date/time when the purchase order is received by the seller.
      • 9 – Date/time of processing.
      • 10 – Date on which goods should be shipped or despatched by the supplier.
      • 11 – (2170) Date/time on which the goods are or are expected to be despatched or shipped.
      • 12 – Date by which payment should be made if discount terms are to apply.
      • 13 – Date by which payment must be made.
      • 14 – Date/time when instalments are due.
      • 15 – Date/time when promotion activities begin.
      • 16 – Date/time when promotion activities end.
      • 17 – Date and/or time when the shipper of the goods expects delivery will take place.
      • 18 – Self explanatory.
      • 20 – Date/time when cheque is issued.
      • 21 – Description to be provided.
      • 22 – Date/time when freight bill is issued.
      • 35 – Date/time on which goods or consignment are delivered at their destination.
      • 36 – Date of expiry of the validity of a referenced document, price information or any other referenced data element with a limited validity period.

      Showing 20 of 485 values defined for element 2005 in D98B.

    • 2380 – The value of a date, a date and time, a time or of a period in a specified representation.
      Type: an, Max Length: 35
    • 2379 – Specification of the representation of a date, a date and time or of a period.
      Type: an, Max Length: 3
      Valid Codes:
      • 2 – Calendar date: D = Day; M = Month; Y = Year.
      • 3 – Calendar date: M = Month; D = Day; Y = Year.
      • 101 – Calendar date: Y = Year; M = Month; D = Day.
      • 102 – Calendar date: C = Century ; Y = Year ; M = Month ; D = Day.
      • 103 – Calendar week day: Y = Year ; W = Week ; D = Day Week number 01 is always first week of January Day number 1 is always Monday.
      • 105 – Calendar day: Y = Year ; D = Day January the first = Day 001 Always start numbering the days of the year from January 1st through December 31st.
      • 106 – Day of a month: M = Month; D = Day.
      • 107 – Day's number within a specific year: D = Day.
      • 108 – Week's number within a specific year: W = Week.
      • 109 – Month's number within a specific year: M = Month.
      • 110 – Day's number within is a specific month: D = Day.
      • 201 – Calendar date including time without seconds: Y = Year; M = Month; D = Day; H = Hour; M = Minute.
      • 202 – Calendar date including time with seconds: Y = Year; M = Month; D = Day; H = Hour; m = Minutes = Seconds.
      • 203 – Calendar date including time with minutes: C=Century; Y=Year; M=Month; D=Day; H=Hour; M=Minutes.
      • 204 – Calendar date including time with seconds: C=Century;Y=Year; M=Month;D=Day;H=Hour;M=Minute;S=Second.
      • 301 – See 201 + Z = Time zone.
      • 302 – See 202 + Z = Time zone.
      • 303 – See 203 plus Z=Time zone.
      • 304 – See 204 plus Z=Time zone.
      • 305 – Month, day, hours, minutes; M = Month; D = Day; H = Hour; M = Minute.

      Showing 20 of 71 values defined for element 2379 in D98B.

GIS To transmit a processing indicator. (Max 1) Required
  • C529 – Type of process indication.
    • 7365 – Identifies the value to be attributed to indicators required by the processing system.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Content of message is accepted.
      • 2 – Content of message is rejected, with comment.
      • 3 – Content of message is rejected, without comment.
      • 4 – Specified goods have been released from Customs control.
      • 5 – Specified goods are required for examination.
      • 6 – All document, or documents as specified, to be produced.
      • 7 – Specified goods are detained.
      • 8 – Specified goods may move under Customs transfer.
      • 9 – Goods declaration is accepted, awaiting goods arrival.
      • 10 – Declaration is requested.
      • 11 – Information for pre-entry of a goods declaration.
      • 12 – The sender is not allowed to send the message type which was sent.
      • 13 – The message type is not supported by the recipient.
      • 14 – Message conveys information on an error.
      • 15 – Response after correction; correction has been approved.
      • 16 – Response after correction; correction has not been approved.
      • 17 – Message has been received.
      • 18 – Request for clearance of the goods.
      • 19 – Goods are in bulk.
      • 20 – Commercial transaction will be paid by cash within a prescribed time frame.

      Showing 20 of 94 values defined for element 7365 in D98B.

    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 143 values defined for element 1131 in D98B.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 223 values defined for element 3055 in D98B.

    • 7187 – Specification of a process or subprocess.
      Type: an, Max Length: 17
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Self explanatory.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – Freezing process.
      • 8 – The information to be processed is in structured form.
      • 9 – The information to be processed is identical and given in structured and unstructured form.
      • 10 – The information to be processed is different and is given in structured and unstructured form.
      • 11 – The information to be processed is in unstructured form.
      • 12 – Slaughter process.
      • 13 – Packing process.
      • 14 – Treated by heat sterilisation.
      • 15 – Treated by chemical sterilisation.
      • 16 – Treated by fumigation.
      • 17 – Treated by irradiation.
      • 18 – Fueling process.
Group SG1 (Max 1)
RFF To specify a reference. (Max 1) Required
  • C506 – Identification of a reference.
    • 1153 – Code giving specific meaning to a reference segment or a reference number.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • AAA – [1018] Reference number assigned by the seller to his acknowledgement of an order.
      • AAB – [1088] Reference number assigned by the seller to a Proforma Invoice.
      • AAC – [1172] Reference number assigned by issuing bank to a Documentary credit.
      • AAD – [1318] Reference number assigned by the issuer to a Contract Addendum.
      • AAE – Reference number assigned to a goods declaration.
      • AAG – Reference number assigned by issuing party to an offer.
      • AAJ – Reference number assigned by issuer to a delivery order.
      • AAK – Reference number assigned by issuing party to a despatch advice.
      • AAL – Reference number identifying a specific product drawing.
      • AAM – Reference number assigned to a waybill, see: 1001 = 700.
      • AAN – Reference number assigned by buyer to a delivery schedule.
      • AAO – [1362] Reference assigned by the consignee to a shipment.
      • AAP – [1310] Reference to a specific consignment forming part of a contract allowing part deliveries.
      • AAQ – [8260] Marks (letters and/or numbers) which identify a unit load device e.g. freight container.
      • AAS – [1188] Reference assigned by the carrier or his agent to the transport document.
      • AAT – Identifies the master label number of any package type.
      • AAU – [1128] Reference number assigned by the seller to a Despatch Note.
      • AAV – Reference number assigned to an enquiry.
      • AAY – Reference number assigned by the carriers agent to a transaction.
      • AAZ – For maritime shipments, this code qualifies a Standard Alpha Carrier Code (SCAC) as issued by the United Stated National Motor Traffic Association Inc.

      Showing 20 of 618 values defined for element 1153 in D98B.

    • 1154 – Identification number the nature and function of which can be qualified by an entry in data element 1153 Reference qualifier.
      Type: an, Max Length: 35
    • 1156 – Number of the line in the document/message referenced in 1154 Reference number.
      Type: an, Max Length: 6
    • 4000 – To uniquely identify a reference by its version number.
      Type: an, Max Length: 35
    • 1060 – To specify a revision number.
      Type: an, Max Length: 6
DTM To specify date, and/or time, or period. (Max 1)

Elements and codes as defined at DTM above.

Group SG2 (Max 2) Required
IND To specify an index. (Max 1) Required
  • C545 – To identify an index.
    • 5013 – To identify the type of index being referred to.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • 1 – Indicates that the index relates to the whole project.
      • 2 – Indicates that the index relates to a group of work items.
      • 3 – Indicates that the index is an alternative.
    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 143 values defined for element 1131 in D98B.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 223 values defined for element 3055 in D98B.

  • C546 – To identify the value of an index.
    • 5030 – To specify the value of an index.
      Type: an, Max Length: 35 (Required)
    • 5039 – To identify the representation of an index value.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
FTX To provide free form or coded text information. (Max 1)
  • C107 – Coded reference to a standard text and its source.
    • 4441 – Free text in coded form.
      Type: an, Max Length: 17 (Required)
    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 143 values defined for element 1131 in D98B.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 223 values defined for element 3055 in D98B.

  • C108 – Free text; one to five lines.
    • 4440 – Free text field available to the message sender for information.
      Type: an, Max Length: 70 (Required)
    • 4440 – Free text field available to the message sender for information.
      Type: an, Max Length: 70
    • 4440 – Free text field available to the message sender for information.
      Type: an, Max Length: 70
    • 4440 – Free text field available to the message sender for information.
      Type: an, Max Length: 70
    • 4440 – Free text field available to the message sender for information.
      Type: an, Max Length: 70
  • 4451 – Code specifying subject of a free text.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • AAA – [7002] Plain language description of the nature of the goods sufficient to identify them at the level required for banking, Customs, statistical or transport purposes, avoiding unnecessary detail (Generic term).
    • AAB – [4276] Conditions of payment between the parties to a transaction (generic term).
    • AAC – Additional information concerning dangerous goods.
    • AAD – Proper shipping name, supplemented as necessary with the correct technical name, by which a dangerous substance or article may be correctly identified or which is sufficiently informative to permit identification by reference to generally available literature.
    • AAE – The content of an acknowledgement.
    • AAF – Specific details applying to rates.
    • AAG – Indicates that the segment contains instructions to be passed on to the identified party.
    • AAH – [4034] Information entered by Customs on the CIM.
    • AAI – Self explanatory.
    • AAJ – Additional conditions specific to this order or project.
    • AAK – Information on the price conditions that are expected or given.
    • AAL – Expression of a number in characters as length of ten meters.
    • AAM – Technical or commercial reasons why a piece of equipment may not be re-used after the current transport terminates.
    • AAN – Restrictions in handling depending on the technical characteristics of the piece of equipment or on the nature of the goods.
    • AAO – Error described by a free text.
    • AAP – Free text of the response to a communication.
    • AAQ – Self explanatory.
    • AAR – (4053) Free text of the non Incoterms terms of delivery. For Incoterms, use: 4053.
    • AAS – Self explanatory.
    • AAT – Free text information on an IATA Air Waybill to indicate means by which account is to be settled.

    Showing 20 of 224 values defined for element 4451 in D98B.

  • 4453 – Code specifying the purpose of the text.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – The occurrence of this text does not affect message processing.
    • 2 – Text description of a coded data item for which there is no currently available code.
    • 3 – Text must be read before actioning message.
    • 4 – Pass text on to later recipient.
    • 5 – Indicates that the text is to be taken as a header.
    • 6 – Indicates that the text starts a new numbered paragraph.
    • 7 – Indicates that the text is a paragraph.
  • 3453 – Code of language (ISO 639-1988).
    Type: an, Max Length: 3
  • 4447 – Code specifying the formatting parameters for the text.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – The associated text is centred in the available space.
    • 2 – The associated text item is aligned flush left in the available space.
    • 3 – The associated text is aligned flush right in the available space.
    • 4 – The associated text is justified in the available space.
    • 5 – The text is to be preceded by one blank line.
    • 6 – The text is to be preceded by two blank lines.
    • 7 – The text is to be preceded by three blank lines.
    • 8 – The text is a continuation of preceding text.
    • 9 – The text is to begin on a new page.
    • 10 – The text is the final section of the preceding text.
    • 11 – The text is to begin a new line.
Group SG3 (Max 99)
PNA To specify information necessary to establish the identity of a party. (Max 1) Required
  • C206 – The identification of an object.
    • 7402 – The number given to an object for its unique identification.
      Type: an, Max Length: 35 (Required)
    • 7405 – Code specifying the type/source of identity number.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – A number that is used to identify goods from a freight forwarder/consolidator.
      • AB – The first element in a series of elements that together define the structure of an object.
      • AC – The second element in a series of elements that together define the structure of an object.
      • AD – The third element in a series of elements that together define the structure of an object.
      • AE – The fourth element in a series of elements that together define the structure of an object.
      • AF – The fifth element in a series of elements that together define the structure of an object.
      • AG – The sixth element in a series of elements that together define the structure of an object.
      • AH – The seventh element in a series of elements that together define the structure of an object.
      • AI – The eighth element in a series of elements that together define the structure of an object.
      • AJ – The ninth element in a series of elements that together define the structure of an object.
      • AK – The identity of a data set.
      • AL – Reference number assigned by a consignee to a Kanban card.
      • AM – Level number in a hierarchy or other structure.
      • AN – A unique number identifying a particular assembly or other manufacturing process.
      • AO – A number to identify the position within a package according to agreed rules between partners.
      • AP – A name or number which identifies a product.
      • AQ – Number assigned to a release.
      • AR – Statistical concept.
      • AS – A table of items e.g. figures and text represented in rows and columns.
      • AT – Number identifying a group of articles in a predescribed unit load for shipment/dispatch as agreed between partners.

      Showing 20 of 62 values defined for element 7405 in D98B.

  • C082 – Identification of a transaction party by code.
    • 3039 – Code identifying a party involved in a transaction.
      Type: an, Max Length: 35 (Required)
    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 143 values defined for element 1131 in D98B.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 223 values defined for element 3055 in D98B.

  • C816 – To specify a name component.
    • 3405 – To identify the type of name component.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • 1 – The surname of an individual.
      • 2 – Christian name.
      • 3 – First part of a composite surname.
      • 5 – Second part of a composite surname.
      • 6 – First Christian name as registered in official documents.
      • 7 – Second Christian name as registered in official documents.
      • 8 – Initial of the second Christian name.
      • 9 – Third Christian name as registered in official documents.
      • 10 – Whole name, comprising an unspecified mix of components.
      • 11 – To identify a name suffix.
      • 12 – To identify a name prefix.
    • 3398 – Part of party name such as family name or given name.
      Type: an, Max Length: 70
    • 3401 – To specify the usage of a name component.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – The correctness of the name component has been verified.
      • 2 – Part of the name usually used.
      • 3 – The name is an abbreviation of the official name.
    • 3295 – To specify the alphabet originally used to represent the name.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Greek characters.
  • C816 – To specify a name component.
    • 3405 – To identify the type of name component.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • 1 – The surname of an individual.
      • 2 – Christian name.
      • 3 – First part of a composite surname.
      • 5 – Second part of a composite surname.
      • 6 – First Christian name as registered in official documents.
      • 7 – Second Christian name as registered in official documents.
      • 8 – Initial of the second Christian name.
      • 9 – Third Christian name as registered in official documents.
      • 10 – Whole name, comprising an unspecified mix of components.
      • 11 – To identify a name suffix.
      • 12 – To identify a name prefix.
    • 3398 – Part of party name such as family name or given name.
      Type: an, Max Length: 70
    • 3401 – To specify the usage of a name component.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – The correctness of the name component has been verified.
      • 2 – Part of the name usually used.
      • 3 – The name is an abbreviation of the official name.
    • 3295 – To specify the alphabet originally used to represent the name.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Greek characters.
  • C816 – To specify a name component.
    • 3405 – To identify the type of name component.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • 1 – The surname of an individual.
      • 2 – Christian name.
      • 3 – First part of a composite surname.
      • 5 – Second part of a composite surname.
      • 6 – First Christian name as registered in official documents.
      • 7 – Second Christian name as registered in official documents.
      • 8 – Initial of the second Christian name.
      • 9 – Third Christian name as registered in official documents.
      • 10 – Whole name, comprising an unspecified mix of components.
      • 11 – To identify a name suffix.
      • 12 – To identify a name prefix.
    • 3398 – Part of party name such as family name or given name.
      Type: an, Max Length: 70
    • 3401 – To specify the usage of a name component.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – The correctness of the name component has been verified.
      • 2 – Part of the name usually used.
      • 3 – The name is an abbreviation of the official name.
    • 3295 – To specify the alphabet originally used to represent the name.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Greek characters.
  • C816 – To specify a name component.
    • 3405 – To identify the type of name component.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • 1 – The surname of an individual.
      • 2 – Christian name.
      • 3 – First part of a composite surname.
      • 5 – Second part of a composite surname.
      • 6 – First Christian name as registered in official documents.
      • 7 – Second Christian name as registered in official documents.
      • 8 – Initial of the second Christian name.
      • 9 – Third Christian name as registered in official documents.
      • 10 – Whole name, comprising an unspecified mix of components.
      • 11 – To identify a name suffix.
      • 12 – To identify a name prefix.
    • 3398 – Part of party name such as family name or given name.
      Type: an, Max Length: 70
    • 3401 – To specify the usage of a name component.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – The correctness of the name component has been verified.
      • 2 – Part of the name usually used.
      • 3 – The name is an abbreviation of the official name.
    • 3295 – To specify the alphabet originally used to represent the name.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Greek characters.
  • C816 – To specify a name component.
    • 3405 – To identify the type of name component.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • 1 – The surname of an individual.
      • 2 – Christian name.
      • 3 – First part of a composite surname.
      • 5 – Second part of a composite surname.
      • 6 – First Christian name as registered in official documents.
      • 7 – Second Christian name as registered in official documents.
      • 8 – Initial of the second Christian name.
      • 9 – Third Christian name as registered in official documents.
      • 10 – Whole name, comprising an unspecified mix of components.
      • 11 – To identify a name suffix.
      • 12 – To identify a name prefix.
    • 3398 – Part of party name such as family name or given name.
      Type: an, Max Length: 70
    • 3401 – To specify the usage of a name component.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – The correctness of the name component has been verified.
      • 2 – Part of the name usually used.
      • 3 – The name is an abbreviation of the official name.
    • 3295 – To specify the alphabet originally used to represent the name.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Greek characters.
  • 3035 – Code giving specific meaning to a party.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • AA – Party to be billed in accordance with AAR Accounting rule 11.
    • AB – Third party who arranged the purchase of merchandise on behalf of the actual buyer.
    • AE – Any natural or legal person who makes a declaration to an official body on behalf of another natural or legal person, where legally permitted (CCC).
    • AF – Natural or legal person responsible for the satisfactory performance of a Customs transit operation. Source: CCC.
    • AG – (3196) Party authorized to act on behalf of another party.
    • AH – Agent acting on behalf of the transit principal (CCC).
    • AI – Person who has been chosen for a job.
    • AJ – The party which has issued all mutually agreed codes used in the message.
    • AK – Party to whom acknowledgement should be sent.
    • AL – (3340) Party accepting liability for goods held or moving (e.g. transit) under a Customs authorization and - when applicable - a guarantee.
    • AM – Employee of a company or firm authorized to act on behalf of that company or firm e.g. to make a Customs declaration.
    • AN – Person or company which is authorised by the relevant Customs authority to import goods without payment all taxes or specific taxes at the point of entry into the country.
    • AO – Party account is assigned to.
    • AP – (3352) Party accepting goods, products, services etc.
    • AQ – Person or company approved by the relevant authority in the country to pack and export specific goods under Customs supervision.
    • AR – Exporter authorized/approved by Customs for special Customs procedures e.g. simplified procedure.
    • AS – Identifies the financial institution servicing the account(s).
    • AT – Importer authorized/approved by Customs for special Customs procedures e.g. simplified procedure.
    • AU – Trader authorized/approved by Customs for special transit procedures e.g. simplified procedure.
    • AV – Party that has delegated the authority to take a certain action on behalf of a company or agency.

    Showing 20 of 375 values defined for element 3035 in D98B.

  • 3403 – Code for type of name such as official name, alias.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – Family name of person before marriage.
    • 2 – Marital name.
    • 3 – Normal name used to identify a person.
    • 4 – Name used to identify a person in a particular context.
    • 5 – The name as registered by official authorities.
    • 7 – A fictitious name adopted.
    • 8 – An assumed name.
    • 9 – The name of a company.
    • 10 – Name of an organisation.
  • 3397 – To specify the status of a name (such as current name).
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – The name of an individual assigned at birth.
    • 2 – Name currently used by the person.
    • 3 – The previous name which was used but is no longer used by the person.
    • 5 – Checked.
    • 6 – Not checked.
  • 1229 – Code specifying the action to be taken or already taken.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – This line item is added to the referenced message.
    • 2 – This line item is deleted from the referenced message.
    • 3 – This line item is changed in the referenced message.
    • 4 – This line item is not affected by the actual message.
    • 5 – This line item is entirely accepted by the seller.
    • 6 – This line item is accepted but amended by the seller.
    • 7 – This line item is not accepted by the seller.
    • 8 – Self explanatory.
    • 9 – Self explanatory.
    • 10 – This line item is not found in the referenced message.
    • 11 – This line is not amended by the buyer.
    • 12 – Self explanatory.
    • 13 – Buyer has deducted amount from payment.
    • 14 – Buyer has a claim against an outstanding invoice.
    • 15 – Factor has been requested to charge back the outstanding item.
    • 16 – Seller agrees to issue a credit note.
    • 17 – New settlement terms have been agreed.
    • 18 – Factor agrees to abide by the outcome of negotiations between seller and buyer.
    • 19 – Seller does not accept validity of dispute.
    • 20 – The reported situation is settled.

    Showing 20 of 44 values defined for element 1229 in D98B.

ADR To specify an address. (Max 5)
  • C817 – To describe the usage of an address.
    • 3299 – To specify the purpose of the address.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – The address is the home address.
      • 2 – Address where contact may be made.
      • 3 – Address of arrival.
      • 4 – Address of departure.
      • 5 – Address where a person works.
      • 6 – Address where medical care is provided.
      • 7 – Address where samples are collected.
    • 3131 – To specify the type of address.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – The address is representing a postal address.
      • 2 – Identification of an address as required by fiscal administrations.
      • 3 – The address represents an actual physical location.
    • 3475 – To specify the status of the address.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – The address is the permanent address.
      • 2 – Current address.
      • 4 – The previous address.
      • 5 – A former address.
      • 6 – An address temporarily used.
  • C090 – To specify the details of an address.
    • 3477 – To specify the content of the various address components.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Address street name followed by address number.
      • 2 – House number followed by type of road and name of the road.
      • 3 – Type of the road followed by name of the road and the house number.
      • 4 – Post office box.
      • 5 – Unstructured address, comprising an unspecified mix of components.
    • 3286 – To specify a component of an address.
      Type: an, Max Length: 70 (Required)
    • 3286 – To specify a component of an address.
      Type: an, Max Length: 70
    • 3286 – To specify a component of an address.
      Type: an, Max Length: 70
    • 3286 – To specify a component of an address.
      Type: an, Max Length: 70
    • 3286 – To specify a component of an address.
      Type: an, Max Length: 70
  • C819 – To specify a part of a country (eg county or part of a city).
    • 3229 – Identification of the name of sub-entities (state, province) defined by appropriate governmental agencies.
      Type: an, Max Length: 9
    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 143 values defined for element 1131 in D98B.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 223 values defined for element 3055 in D98B.

    • 3228 – Name of sub-entities (state, province) defined by appropriate governmental agencies.
      Type: an, Max Length: 35
  • C517 – Identification of a location by code or name.
    • 3225 – Identification of the name of place/location, other than 3164 City name.
      Type: an, Max Length: 25
    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 143 values defined for element 1131 in D98B.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 223 values defined for element 3055 in D98B.

    • 3224 – Name of place/location, other than 3164 City name.
      Type: an, Max Length: 70
  • 3164 – Name of a city (a town, a village) for addressing purposes.
    Type: an, Max Length: 35
  • 3251 – Code defining postal zones or addresses.
    Type: an, Max Length: 9
  • 3207 – Identification of the name of a country or other geographical entity as specified in ISO 3166.
    Type: an, Max Length: 3
GIR To specify a related set of identification numbers. (Max 1)
  • C206 – The identification of an object.
    • 7402 – The number given to an object for its unique identification.
      Type: an, Max Length: 35 (Required)
    • 7405 – Code specifying the type/source of identity number.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – A number that is used to identify goods from a freight forwarder/consolidator.
      • AB – The first element in a series of elements that together define the structure of an object.
      • AC – The second element in a series of elements that together define the structure of an object.
      • AD – The third element in a series of elements that together define the structure of an object.
      • AE – The fourth element in a series of elements that together define the structure of an object.
      • AF – The fifth element in a series of elements that together define the structure of an object.
      • AG – The sixth element in a series of elements that together define the structure of an object.
      • AH – The seventh element in a series of elements that together define the structure of an object.
      • AI – The eighth element in a series of elements that together define the structure of an object.
      • AJ – The ninth element in a series of elements that together define the structure of an object.
      • AK – The identity of a data set.
      • AL – Reference number assigned by a consignee to a Kanban card.
      • AM – Level number in a hierarchy or other structure.
      • AN – A unique number identifying a particular assembly or other manufacturing process.
      • AO – A number to identify the position within a package according to agreed rules between partners.
      • AP – A name or number which identifies a product.
      • AQ – Number assigned to a release.
      • AR – Statistical concept.
      • AS – A table of items e.g. figures and text represented in rows and columns.
      • AT – Number identifying a group of articles in a predescribed unit load for shipment/dispatch as agreed between partners.

      Showing 20 of 62 values defined for element 7405 in D98B.

  • C206 – The identification of an object.
    • 7402 – The number given to an object for its unique identification.
      Type: an, Max Length: 35 (Required)
    • 7405 – Code specifying the type/source of identity number.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – A number that is used to identify goods from a freight forwarder/consolidator.
      • AB – The first element in a series of elements that together define the structure of an object.
      • AC – The second element in a series of elements that together define the structure of an object.
      • AD – The third element in a series of elements that together define the structure of an object.
      • AE – The fourth element in a series of elements that together define the structure of an object.
      • AF – The fifth element in a series of elements that together define the structure of an object.
      • AG – The sixth element in a series of elements that together define the structure of an object.
      • AH – The seventh element in a series of elements that together define the structure of an object.
      • AI – The eighth element in a series of elements that together define the structure of an object.
      • AJ – The ninth element in a series of elements that together define the structure of an object.
      • AK – The identity of a data set.
      • AL – Reference number assigned by a consignee to a Kanban card.
      • AM – Level number in a hierarchy or other structure.
      • AN – A unique number identifying a particular assembly or other manufacturing process.
      • AO – A number to identify the position within a package according to agreed rules between partners.
      • AP – A name or number which identifies a product.
      • AQ – Number assigned to a release.
      • AR – Statistical concept.
      • AS – A table of items e.g. figures and text represented in rows and columns.
      • AT – Number identifying a group of articles in a predescribed unit load for shipment/dispatch as agreed between partners.

      Showing 20 of 62 values defined for element 7405 in D98B.

  • C206 – The identification of an object.
    • 7402 – The number given to an object for its unique identification.
      Type: an, Max Length: 35 (Required)
    • 7405 – Code specifying the type/source of identity number.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – A number that is used to identify goods from a freight forwarder/consolidator.
      • AB – The first element in a series of elements that together define the structure of an object.
      • AC – The second element in a series of elements that together define the structure of an object.
      • AD – The third element in a series of elements that together define the structure of an object.
      • AE – The fourth element in a series of elements that together define the structure of an object.
      • AF – The fifth element in a series of elements that together define the structure of an object.
      • AG – The sixth element in a series of elements that together define the structure of an object.
      • AH – The seventh element in a series of elements that together define the structure of an object.
      • AI – The eighth element in a series of elements that together define the structure of an object.
      • AJ – The ninth element in a series of elements that together define the structure of an object.
      • AK – The identity of a data set.
      • AL – Reference number assigned by a consignee to a Kanban card.
      • AM – Level number in a hierarchy or other structure.
      • AN – A unique number identifying a particular assembly or other manufacturing process.
      • AO – A number to identify the position within a package according to agreed rules between partners.
      • AP – A name or number which identifies a product.
      • AQ – Number assigned to a release.
      • AR – Statistical concept.
      • AS – A table of items e.g. figures and text represented in rows and columns.
      • AT – Number identifying a group of articles in a predescribed unit load for shipment/dispatch as agreed between partners.

      Showing 20 of 62 values defined for element 7405 in D98B.

  • C206 – The identification of an object.
    • 7402 – The number given to an object for its unique identification.
      Type: an, Max Length: 35 (Required)
    • 7405 – Code specifying the type/source of identity number.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – A number that is used to identify goods from a freight forwarder/consolidator.
      • AB – The first element in a series of elements that together define the structure of an object.
      • AC – The second element in a series of elements that together define the structure of an object.
      • AD – The third element in a series of elements that together define the structure of an object.
      • AE – The fourth element in a series of elements that together define the structure of an object.
      • AF – The fifth element in a series of elements that together define the structure of an object.
      • AG – The sixth element in a series of elements that together define the structure of an object.
      • AH – The seventh element in a series of elements that together define the structure of an object.
      • AI – The eighth element in a series of elements that together define the structure of an object.
      • AJ – The ninth element in a series of elements that together define the structure of an object.
      • AK – The identity of a data set.
      • AL – Reference number assigned by a consignee to a Kanban card.
      • AM – Level number in a hierarchy or other structure.
      • AN – A unique number identifying a particular assembly or other manufacturing process.
      • AO – A number to identify the position within a package according to agreed rules between partners.
      • AP – A name or number which identifies a product.
      • AQ – Number assigned to a release.
      • AR – Statistical concept.
      • AS – A table of items e.g. figures and text represented in rows and columns.
      • AT – Number identifying a group of articles in a predescribed unit load for shipment/dispatch as agreed between partners.

      Showing 20 of 62 values defined for element 7405 in D98B.

  • C206 – The identification of an object.
    • 7402 – The number given to an object for its unique identification.
      Type: an, Max Length: 35 (Required)
    • 7405 – Code specifying the type/source of identity number.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – A number that is used to identify goods from a freight forwarder/consolidator.
      • AB – The first element in a series of elements that together define the structure of an object.
      • AC – The second element in a series of elements that together define the structure of an object.
      • AD – The third element in a series of elements that together define the structure of an object.
      • AE – The fourth element in a series of elements that together define the structure of an object.
      • AF – The fifth element in a series of elements that together define the structure of an object.
      • AG – The sixth element in a series of elements that together define the structure of an object.
      • AH – The seventh element in a series of elements that together define the structure of an object.
      • AI – The eighth element in a series of elements that together define the structure of an object.
      • AJ – The ninth element in a series of elements that together define the structure of an object.
      • AK – The identity of a data set.
      • AL – Reference number assigned by a consignee to a Kanban card.
      • AM – Level number in a hierarchy or other structure.
      • AN – A unique number identifying a particular assembly or other manufacturing process.
      • AO – A number to identify the position within a package according to agreed rules between partners.
      • AP – A name or number which identifies a product.
      • AQ – Number assigned to a release.
      • AR – Statistical concept.
      • AS – A table of items e.g. figures and text represented in rows and columns.
      • AT – Number identifying a group of articles in a predescribed unit load for shipment/dispatch as agreed between partners.

      Showing 20 of 62 values defined for element 7405 in D98B.

  • 7297 – Identification of the type of set.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • 1 – Self explanatory.
    • 2 – Description to be provided.
    • 3 – Related numbers identifying a package such as a bar code label number related to a kanban card number, etc.
    • 4 – A code which indicates that the identities which follow are related to a particular vehicle which may have been previously identified.
    • 5 – The source database of the data in a data set.
    • 6 – The target database for the data in a data set.
    • 7 – A coded or non coded list of values.
    • 8 – The contract related item numbers.
    • 9 – Financial security identifier set.
    • 10 – A code to identify a set of numbers used for accounting.
    • 11 – A set of numbers to identify a project.
    • 12 – A set of numbers to identify a plan of work.
    • 13 – A set of numbers to identify a schedule of work.
    • 14 – A set of numbers to identify a resource.
    • 15 – A set of numbers to identify a milestone event.
    • 16 – A set of numbers to identify an interface work task.
    • 17 – A set of numbers to identify a work task constraint.
    • 18 – Position number(s) of a data structure's relevant components.
NAT To specify a nationality. (Max 1)
  • C042 – To specify a nationality.
    • 3293 – Code for country of which an entity is the subject.
      Type: an, Max Length: 3
    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 143 values defined for element 1131 in D98B.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 223 values defined for element 3055 in D98B.

    • 3292 – Name of country of which an entity is the subject.
      Type: a, Max Length: 35
  • 3493 – To qualify a nationality.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • 1 – The nationality assigned the individual at birth.
    • 2 – Current nationality.
    • 3 – Nationality of a person before the current nationality.
DOC To identify documents and details directly related to it. (Max 1)
  • C002 – Identification of a type of document/message by code or name. Code preferred.
    • 1001 – Document/message identifier expressed in code.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Certificate providing the values of an analysis.
      • 2 – Certificate certifying the conformity to predefined definitions.
      • 3 – Certificate certifying the quality of goods, services etc.
      • 4 – Report providing the results of a test session.
      • 5 – Report specifying the performance values of products.
      • 6 – Report providing specification values of products.
      • 7 – Reports on events during production process.
      • 8 – Self explanatory.
      • 9 – Self explanatory.
      • 10 – Document/message providing basic data concerning a party.
      • 11 – A pre-approved document relating to federal label approval requirements.
      • 12 – Certificate certifying a specific quality of agricultural products.
      • 13 – Document/message which evidences the transport of goods by post (e.g. mail, parcel, etc.).
      • 14 – Certificate certifying the weight of goods.
      • 15 – Document/message specifying the weight of goods.
      • 16 – Document by means of which the documentary credit applicant specifies the conditions for the certificate and by whom the certificate is to be issued.
      • 17 – Document identifying goods in which the issuing authority expressly certifies that the goods originate in a specific country or part of, or group of countries. It also states the price and/or cost of the goods with the purpose of determining the customs origin.
      • 18 – Specific form of transit declaration issued by the exporter (movement certificate).
      • 19 – Certificate certifying the quantity of goods, services etc.
      • 20 – Usage of QALITY-message.

      Showing 20 of 494 values defined for element 1001 in D98B.

    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 143 values defined for element 1131 in D98B.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 223 values defined for element 3055 in D98B.

    • 1000 – Plain language identifier specifying the function of a document/message.
      Type: an, Max Length: 35
  • C503 – Identification of document/message by number, status, source and/or language.
    • 1004 – Reference number assigned to the document/message by the issuer.
      Type: an, Max Length: 35
    • 1373 – To identify the status of a document/message.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Notice that a specific document will be accompanying the goods.
      • 3 – Self explanatory.
      • 4 – Notice that a specific document/message will be transmitted via a separate EDI message.
      • 5 – Notice that the specific document or message is for information only.
      • 6 – Notice that a specific document or message will not be sent via EDI.
      • 7 – Request for a specific message to be formatted and transmitted or a request for a specific document to be raised and sent.
      • 8 – Self explanatory.
      • 9 – The document or message is to be printed.
      • 10 – Specific document is currently valid.
      • 11 – Specified document is not available.
      • 12 – Customs declaration to which the document is related completed or exhaust the allowance stated on the document. The document is attached to the Customs declaration.
      • 13 – Customs declaration to which the document is related does not complete or exhaust the allowance stated on the document . The document is not attached to the declaration but has already been lodged in the Customs station.
      • 14 – Customs declaration to which the document is related completed or exhaust the allowance stated on the document. The usage of the document is complete. The document is not attached to the declaration but has already been lodged in the Customs station.
      • 15 – Customs declaration to which the document is related does not complete or exhaust the allowance stated on the document. The document can continue to be used for future declarations until the allowance is exhausted. The document is not attached to the declaration but has already been lodged in the Customs station.
      • 16 – Specified document is not or cannot be attached.
      • 17 – Document not attached to the Customs declaration but is attached to the goods.
      • 18 – Specified document is attached to the Customs declaration and will be required to be returned to the declarant after Customs endorsement.
      • 19 – Application has been submitted for that document.
      • 20 – Indicates that the document has legal validity from the date of receival of the cargo.

      Showing 20 of 31 values defined for element 1373 in D98B.

    • 1366 – Indication of the source from which the printed information is to be or has been obtained.
      Type: an, Max Length: 70
    • 1056 – To specify the version number or name of an object.
      Type: an, Max Length: 9
    • 1060 – To specify a revision number.
      Type: an, Max Length: 6
  • 3153 – Code identifying the type of communication channel being used.
    Type: an, Max Length: 3
    Valid Codes:
    • AA – A process that, on demand, connects two or more data terminal equipments and permits the exclusive use of a data circuit between them until the connection is released (ISO).
    • AB – Communications number assigned by Societe Internationale de Telecommunications Aeronautiques (SITA).
    • AC – Communications number assigned by Aeronautical Radio Inc.
    • AD – A communication channel identifying a courier.
    • CA – Self explanatory.
    • EI – Number identifying the service and service user.
    • EM – Exchange of mail by electronic means.
    • EX – Telephone extension.
    • FT – According to ISO.
    • FX – Device used for transmitting and reproducing fixed graphic material (as printing) by means of signals over telephone lines or other electronic transmission media.
    • GM – Self explanatory.
    • IE – Self explanatory.
    • IM – Internal mail address/number.
    • MA – Postal service document delivery.
    • PB – Self explanatory.
    • PS – The process of routing and transferring data by means of addressed packets so that a channel is occupied only during the transmission; upon completion of the transmission the channel is made available for the transfer of other packets (ISO).
    • SW – Communications address assigned by Society for Worldwide Interbank Financial Telecommunications s.c.
    • TE – Voice/data transmission by telephone.
    • TG – Text transmission via telegraph.
    • TL – Transmission of text/data via telex.

    Showing 20 of 24 values defined for element 3153 in D98B.

  • 1220 – Number of originals or copies of a document stipulated or referred to as being required.
    Type: n, Max Length: 2
  • 1218 – Specification of the number of originals of a stipulated document that are required.
    Type: n, Max Length: 2
ATT To identify a specific attribute. (Max 5)
  • C955 – Identification of the type of attribute.
    • 9021 – Coded specification of the type attribute.
      Type: an, Max Length: 3
    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 143 values defined for element 1131 in D98B.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 223 values defined for element 3055 in D98B.

  • C956 – Identification of the attribute related to an entity.
    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 143 values defined for element 1131 in D98B.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 223 values defined for element 3055 in D98B.

    • 9018 – Description of an attribute of an entity.
      Type: an, Max Length: 35
  • 9017 – Specification of the meaning of an attribute function.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • 1 – Attribute refers to a member of a group of persons or a service scheme.
    • 2 – Attribute refers to a person.
    • 3 – A structure component of an array.
    • 4 – Attribute to specify an academic title.
    • 5 – Attribute to specify professional title.
    • 6 – Attribute to specify a personal title.
    • 7 – Attribute refers to a directory set definition.
    • ZZZ – Mutually defined attribute function qualifier.
Group SG4 (Max 2)
DTM To specify date, and/or time, or period. (Max 1) Required

Elements and codes as defined at DTM above.

ADR To specify an address. (Max 1)

Elements and codes as defined at ADR above.

Group SG5 (Max 1)
PDI To specify items of person demographic information. (Max 1) Required
  • C085 – To specify the marital status of a person.
    • 3479 – Code giving the marital status of a person.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Person is unmarried and has never been married.
      • 2 – Person is married.
      • 3 – Person is unmarried but has been married before.
      • 4 – Person is still married but living apart from spouse.
      • 5 – Person is a widow or widower.
      • 6 – The marital status is unknown.
    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 143 values defined for element 1131 in D98B.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 223 values defined for element 3055 in D98B.

    • 3478 – Marital status of a person.
      Type: an, Max Length: 35
  • C101 – To specify the religion of a person.
    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 143 values defined for element 1131 in D98B.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 223 values defined for element 3055 in D98B.

    • 3482 – To specify the religion of a person.
      Type: an, Max Length: 35
  • 3499 – Code giving the gender of a person, animal or plant.
    Type: an, Max Length: 3
DTM To specify date, and/or time, or period. (Max 2)

Elements and codes as defined at DTM above.

Group SG6 (Max 1)
AUT To specify results of the application of an authentication procedure. (Max 1) Required
  • 9280 – The result of the application of an algorithm to the content of data element in a message.
    Type: an, Max Length: 35 (Required)
  • 9282 – Identifies the cryptographic key used to calculate the validation result.
    Type: an, Max Length: 35
DTM To specify date, and/or time, or period. (Max 1)

Elements and codes as defined at DTM above.

UNT Unknown Segment (Max 1) Required

Sources and further reading