Try it now Login

UN/EDIFACT D10B SLSFCT Message

Review the SLSFCT segment sequence, mandatory fields, repeat counts and valid codes for the D10B EDIFACT directory.

What the SLSFCT message is for

Sales Forecast Report Message. A buyer's forecast of expected sales by product and location, shared so suppliers can plan ahead.

SLSFCT shares demand expectations across the trading relationship. A retailer sends forward-looking sales estimates by product and, usually, by location, so a supplier can plan production and raw materials against expected demand rather than against orders that have not been placed yet. It is central to collaborative planning arrangements, and it is explicitly not a commitment: the figures are the buyer's best current estimate, and the value comes from sharing them early enough to be useful.

Who exchanges it

Sent by retailers, distributors and category planners, received by suppliers and manufacturers. Read alongside SLSRPT, which reports actual sales, and INVRPT, which reports stock. Together they drive replenishment resulting in ORDERS.

Segments that carry the parts people get wrong

  • BGMForecast identifier and function.
  • DTMThe periods being forecast, and when the forecast was produced.
  • LOCThe location the forecast applies to.
  • LINThe product being forecast.
  • QTYForecast quantity per period.

In practice: Forecasts are superseded frequently, so the generation date in DTM matters as much as the quantities. Applying an older forecast over a newer one is a common integration fault and is invisible until the plan is wrong.

Jump to Segment
UNH
BGM
DTM
NAD
CTA
COM
RFF
DTM
CUX
DTM
LOC
DTM
LIN
PIA
IMD
PAC
RFF
DOC
ALI
MOA
PRI
QTY
MKS
NAD
UNT
UNH Unknown Segment (Max 1) Required
BGM To indicate the type and function of a message and to transmit the identifying number. (Max 1) Required
  • C002 – Identification of a type of document/message by code or name. Code preferred.
    • 1001 – Code specifying the document name.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Certificate providing the values of an analysis.
      • 2 – Certificate certifying the conformity to predefined definitions.
      • 3 – Certificate certifying the quality of goods, services etc.
      • 4 – Report providing the results of a test session.
      • 5 – Report specifying the performance values of products.
      • 6 – Report providing specification values of products.
      • 7 – Reports on events during production process.
      • 8 – Document/message describes the test report of the first sample.
      • 9 – A document/message to enable the transmission of information regarding pricing and catalogue details for goods and services offered by a seller to a buyer.
      • 10 – Document/message providing basic data concerning a party.
      • 11 – A pre-approved document relating to federal label approval requirements.
      • 12 – Certificate certifying a specific quality of agricultural products.
      • 13 – Document/message which evidences the transport of goods by post (e.g. mail, parcel, etc.).
      • 14 – Certificate certifying the weight of goods.
      • 15 – Document/message specifying the weight of goods.
      • 16 – Document by means of which the documentary credit applicant specifies the conditions for the certificate and by whom the certificate is to be issued.
      • 17 – Document identifying goods in which the issuing authority expressly certifies that the goods originate in a specific country or part of, or group of countries. It also states the price and/or cost of the goods with the purpose of determining the customs origin.
      • 18 – Specific form of transit declaration issued by the exporter (movement certificate).
      • 19 – Certificate certifying the quantity of goods, services etc.
      • 20 – Usage of QALITY-message.

      Showing 20 of 675 values defined for element 1001 in D10B.

    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

    • 1000 – Name of a document.
      Type: an, Max Length: 35
  • C106 – Identification of a document/message by its number and eventually its version or revision.
    • 1004 – To identify a document.
      Type: an, Max Length: 70
    • 1056 – To identify a version.
      Type: an, Max Length: 9
    • 1060 – To identify a revision.
      Type: an, Max Length: 6
  • 1225 – Code indicating the function of the message.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – Message cancelling a previous transmission for a given transaction.
    • 2 – Message containing items to be added.
    • 3 – Message containing items to be deleted.
    • 4 – Message containing items to be changed.
    • 5 – Message replacing a previous message.
    • 6 – Message confirming the details of a previous transmission where such confirmation is required or recommended under the terms of a trading partner agreement.
    • 7 – The message is a duplicate of a previously generated message.
    • 8 – Code indicating that the referenced message is a status.
    • 9 – Initial transmission related to a given transaction.
    • 10 – Message whose reference number is not filed.
    • 11 – Message responding to a previous message or document.
    • 12 – Message indicating that the referenced message was received but not yet processed.
    • 13 – Code indicating that the referenced message is a request.
    • 14 – Code indicating that the information contained in the message is an advance notification of information to follow.
    • 15 – Repeated message transmission for reminding purposes.
    • 16 – Message content is a proposal.
    • 17 – Referenced transaction cancelled, reissued message will follow.
    • 18 – New issue of a previous message (maybe cancelled).
    • 19 – Change information submitted by buyer but initiated by seller.
    • 20 – Message to replace the heading of a previous message.

    Showing 20 of 65 values defined for element 1225 in D10B.

  • 4343 – Code specifying the type of acknowledgment required or transmitted.
    Type: an, Max Length: 3
    Valid Codes:
    • AA – Receiver of the payment message needs to return a debit advice in response to the payment message.
    • AB – Indicates that an acknowledgement relating to receipt of message is required.
    • AC – Acknowledge complete including changes.
    • AD – Acknowledge complete without changes.
    • AE – A debit advice is requested for each transaction in the message.
    • AF – The sender wishes to receive both a Debit Advice and an acknowledgement of receipt for a payment message.
    • AG – Authentication, by a party, of a document established for him by another party.
    • AH – A debit advice and message acknowledgement are requested for each transaction in the message.
    • AI – Acknowledgement of changes only is required.
    • AJ – Indication that the referenced offer or transaction (e.g. cargo booking or quotation request) is being dealt with.
    • AP – Indication that the referenced offer or transaction (e.g., cargo booking or quotation request) has been accepted.
    • AQ – The sender of the message expects a response.
    • AR – Documentary credit collection forwarded directly.
    • AS – The receiver of the message is to acknowledge receipt of the message and sent a credit advice for each credit.
    • CA – Indication that the referenced offer or transaction (e.g., cargo booking or quotation request) has been accepted under conditions indicated in this message.
    • CO – Indication that the message contains the physical measurements on which the charges will be based.
    • NA – Specifies that no acknowledgement is needed in response to this message.
    • RE – Indication that the referenced offer or transaction (e.g., cargo booking or quotation request) is not accepted.
    • UR – The message recipient is to send a credit advice in response to the message.
    • US – An acknowledgement is requested when an error occurred.

    Showing 20 of 23 values defined for element 4343 in D10B.

DTM To specify date, and/or time, or period. (Max 5) Required
  • C507 – Date and/or time, or period relevant to the specified date/time/period type.
    • 2005 – Code qualifying the function of a date, time or period.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • 1 – Actual date/time on which the service was completed.
      • 2 – Date on which buyer requests goods to be delivered.
      • 3 – [2377] Date of issue of an invoice.
      • 4 – [2011] Date of order.
      • 5 – A period of time when saleable stocks are expected to cover demand for a product.
      • 6 – The date an entity moved from a location.
      • 7 – (2069) Date and/or time at which specified event or document becomes effective.
      • 8 – Date/time when the purchase order is received by the seller.
      • 9 – Date/time of processing.
      • 10 – Date on which goods should be shipped or despatched by the supplier.
      • 11 – (2170) Date/time on which the goods are or are expected to be despatched or shipped.
      • 12 – Date by which payment should be made if discount terms are to apply.
      • 13 – Date by which payment must be made.
      • 14 – Date/time when instalments are due.
      • 15 – Date/time when promotion activities begin.
      • 16 – Date/time when promotion activities end.
      • 17 – Date and/or time when the shipper of the goods expects delivery will take place.
      • 18 – The date/time/period of the act, or an instance of installing something or someone.
      • 19 – Period of time between slaughter and delivery during which meat is ageing.
      • 20 – Date/time when cheque is issued.

      Showing 20 of 779 values defined for element 2005 in D10B.

    • 2380 – The value of a date, a date and time, a time or of a period in a specified representation.
      Type: an, Max Length: 35
    • 2379 – Code specifying the representation of a date, time or period.
      Type: an, Max Length: 3
      Valid Codes:
      • 2 – Calendar date: D = Day; M = Month; Y = Year.
      • 3 – Calendar date: M = Month; D = Day; Y = Year.
      • 4 – Calendar date C=Century; Y=Year; M=Month; D=Day.
      • 5 – Calendar date and time: C=Century; Y=Year; M=Month; D=Day; H=Hour; M=Minute.
      • 6 – Half-month: CC=century YY=year MM=month, B=1:first half month, B=2:second half month.
      • 7 – Week within a calendar month: CC=century YY=year MM=month. W=1-5 first week to fifth week in a month.
      • 8 – Shift within a calendar day: CC=century YY=year MM=month DD=day S=1-9 shift in a day.
      • 9 – Time period within a calendar day: CC=century YY=year MM=month DD=day PP=00-99 time period.
      • 10 – Calendar date including time with minutes: C=Century; Y=Year; M=Month; D=Day; T=Time designator; H=Hour; M=Minutes. The character [T] shall be used as time designator to indicate the start of the representation of the time. For example: 20010912T1433.
      • 101 – Calendar date: Y = Year; M = Month; D = Day.
      • 102 – Calendar date: C = Century ; Y = Year ; M = Month ; D = Day.
      • 103 – Calendar week day: Y = Year ; W = Week ; D = Day Week number 01 is always first week of January Day number 1 is always Monday.
      • 104 – A period of time specified by giving the start week of a month followed by the end week of a month. Data is to be transmitted as consecutive characters without hyphen.
      • 105 – Calendar day: Y = Year ; D = Day January the first = Day 001 Always start numbering the days of the year from January 1st through December 31st.
      • 106 – Day of a month: M = Month; D = Day.
      • 107 – Day's number within a specific year: D = Day.
      • 108 – Week's number within a specific year: W = Week.
      • 109 – Month's number within a specific year: M = Month.
      • 110 – Day's number within is a specific month: D = Day.
      • 201 – Calendar date including time without seconds: Y = Year; M = Month; D = Day; H = Hour; M = Minute.

      Showing 20 of 81 values defined for element 2379 in D10B.

Group SG1 (Max 5) Required
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
  • C082 – Identification of a transaction party by code.
    • 3039 – Code specifying the identity of a party.
      Type: an, Max Length: 35 (Required)
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

  • C058 – Unstructured name and address: one to five lines.
    • 3124 – Free form description of a name and address line.
      Type: an, Max Length: 35 (Required)
    • 3124 – Free form description of a name and address line.
      Type: an, Max Length: 35
    • 3124 – Free form description of a name and address line.
      Type: an, Max Length: 35
    • 3124 – Free form description of a name and address line.
      Type: an, Max Length: 35
    • 3124 – Free form description of a name and address line.
      Type: an, Max Length: 35
  • C080 – Identification of a transaction party by name, one to five lines. Party name may be formatted.
    • 3036 – Name of a party.
      Type: an, Max Length: 70 (Required)
    • 3036 – Name of a party.
      Type: an, Max Length: 70
    • 3036 – Name of a party.
      Type: an, Max Length: 70
    • 3036 – Name of a party.
      Type: an, Max Length: 70
    • 3036 – Name of a party.
      Type: an, Max Length: 70
    • 3045 – Code specifying the representation of a party name.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Name component 1: Family name. Name component 2: Given name or initials. Name component 3: Given name or initials. Name component 4: Maiden name. Name component 5: Title Group of name components transmitted in sequence with name component 1 transmitted first. The maiden name is the family name given at birth of a female. Other names are self-explanatory.
      • 2 – Name component 1: paternal name; name component 2: maternal name; name component 3: given name or initial(s); name component 4: middle name or initial(s); name component 5: name suffix.
      • 3 – Name component 1: Qualification Name component 2: First part of the name Name component 3: Second part of the name.
  • C059 – Street address and/or PO Box number in a structured address: one to four lines.
    • 3042 – To identify a street and number and/or Post Office box number.
      Type: an, Max Length: 35 (Required)
    • 3042 – To identify a street and number and/or Post Office box number.
      Type: an, Max Length: 35
    • 3042 – To identify a street and number and/or Post Office box number.
      Type: an, Max Length: 35
    • 3042 – To identify a street and number and/or Post Office box number.
      Type: an, Max Length: 35
  • C819 – To specify a country subdivision, such as state, canton, county, prefecture.
    • 3229 – To identify a country subdivision, such as state, canton, county, prefecture.
      Type: an, Max Length: 9
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

    • 3228 – Name of a country subdivision, such as state, canton, county, prefecture.
      Type: an, Max Length: 70
  • 3035 – Code giving specific meaning to a party.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • AA – Party to be billed in accordance with AAR Accounting rule 11.
    • AB – Third party who arranged the purchase of merchandise on behalf of the actual buyer.
    • AE – Any natural or legal person who makes a declaration to an official body on behalf of another natural or legal person, where legally permitted (CCC).
    • AF – Natural or legal person responsible for the satisfactory performance of a Customs transit operation. Source: CCC.
    • AG – (3196) Party authorized to act on behalf of another party. Synonym: Representative.
    • AH – Agent acting on behalf of the transit principal (CCC).
    • AI – Person who has been chosen for a job.
    • AJ – The party which has issued all mutually agreed codes used in the message.
    • AK – Party to whom acknowledgement should be sent.
    • AL – (3340) Party accepting liability for goods held or moving (e.g. transit) under a Customs authorization and - when applicable - a guarantee.
    • AM – Employee of a company or firm authorized to act on behalf of that company or firm e.g. to make a Customs declaration.
    • AN – Person or company which is authorised by the relevant Customs authority to import goods without payment all taxes or specific taxes at the point of entry into the country.
    • AO – Party account is assigned to.
    • AP – (3336) Party accepting goods, products, services, etc.
    • AQ – Person or company approved by the relevant authority in the country to pack and export specific goods under Customs supervision.
    • AR – Exporter authorized/approved by Customs for special Customs procedures e.g. simplified procedure.
    • AS – Identifies the financial institution servicing the account(s).
    • AT – Importer authorized/approved by Customs for special Customs procedures e.g. simplified procedure.
    • AU – Trader authorized/approved by Customs for special transit procedures e.g. simplified procedure.
    • AV – Party that has delegated the authority to take a certain action on behalf of a company or agency.

    Showing 20 of 589 values defined for element 3035 in D10B.

  • 3164 – Name of a city.
    Type: an, Max Length: 35
  • 3251 – Code specifying the postal zone or address.
    Type: an, Max Length: 17
  • 3207 – Identification of the name of the country or other geographical entity as defined in ISO 3166-1 and UN/ECE Recommendation 3.
    Type: an, Max Length: 3
Group SG2 (Max 5)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
  • C056 – Code and/or name of a contact such as a department or employee. Code preferred.
    • 3413 – To identify a contact, such as a department or employee.
      Type: an, Max Length: 17
    • 3412 – Name of a contact, such as a department or employee.
      Type: an, Max Length: 256
  • 3139 – Code specifying the function of a contact (e.g. department or person).
    Type: an, Max Length: 3
    Valid Codes:
    • AA – Department/person to contact for matters regarding insurance.
    • AB – Department/person to contact for matters regarding the workshop.
    • AC – Department/person in charge of accepting incoming goods.
    • AD – The contact responsible for accounting matters.
    • AE – Department/person to contact for matters regarding contracts.
    • AF – Department/person to contact for matters regarding land registry.
    • AG – Department/person of the agent which acts on behalf of another party.
    • AH – Department/person to contact for matters regarding technical coordination of works.
    • AI – Department/person to contact for matters regarding project management on behalf of the contractor.
    • AJ – Department/person to contact for matters regarding investments.
    • AK – Department/person to contact for matters regarding management of works on behalf of the owner.
    • AL – Department/person to contact for matters regarding personnel (human resources).
    • AM – Department/person to contact for matters regarding claims.
    • AN – Department/person to contact for laboratory matters.
    • AO – Department/person to contact for matters regarding plant/equipment.
    • AP – Department/person responsible for the accounts payable function within a corporation.
    • AQ – Department/person to contact for matters regarding quantity surveying.
    • AR – Department/person responsible for the accounts receivable within a corporation.
    • AS – Department/person to contact for matters regarding public relations.
    • AT – Department/person to contact for matters regarding technical issues.

    Showing 20 of 99 values defined for element 3139 in D10B.

COM To identify a communication number of a department or a person to whom communication should be directed. (Max 5)
  • C076 – Communication number of a department or employee in a specified channel.
    • 3148 – To identify a communication address.
      Type: an, Max Length: 512 (Required)
    • 3155 – Code specifying the type of communication address.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • AA – A process that, on demand, connects two or more data terminal equipments and permits the exclusive use of a data circuit between them until the connection is released (ISO).
      • AB – Communications number assigned by Societe Internationale de Telecommunications Aeronautiques (SITA).
      • AC – Communications number assigned by Aeronautical Radio Inc.
      • AD – AT&T mailbox identifier.
      • AE – Peripheral device identification.
      • AF – The switched telecommunications network of the United States Department of Defense.
      • AG – The switched telecommunications network of the United States government.
      • AH – Data exchange via the World Wide Web.
      • AI – Identifies that portion of an international telephone number representing the country code to be used when calling internationally.
      • AJ – Identifies the alternate telephone number.
      • AK – Code that identifies the communications number for the online videotex service.
      • AL – Identifies the cellular phone number.
      • AM – The international telephone direct line number.
      • AN – ODETTE File Transfer Protocol.
      • AO – Identification of the Uniform Resource Location (URL) Synonym: World wide web address.
      • AP – VHF radio telephone.
      • AQ – The X.400 address accepting information in the body text of a message.
      • AR – Address capable of receiving messages in accordance with the EDIINT/AS1 protocol for MIME based EDI .
      • AS – Address capable of receiving messages in accordance with the EDIINT/AS2 protocol.
      • AT – Address capable of receiving messages in accordance with the EDIINT/AS3 protocol.

      Showing 20 of 47 values defined for element 3155 in D10B.

Group SG3 (Max 5)
RFF To specify a reference. (Max 1) Required
  • C506 – Identification of a reference.
    • 1153 – Code qualifying a reference.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • AAA – (1018) Reference number identifying the acknowledgement of an order.
      • AAB – [1088] Reference number to identify a proforma invoice.
      • AAC – [1172] Reference number to identify a documentary credit.
      • AAD – [1318] Reference number to identify an addendum to a contract.
      • AAE – Reference number assigned to a goods declaration.
      • AAF – A reference number identifying a debit card.
      • AAG – (1332) Reference number assigned by issuing party to an offer.
      • AAH – Reference number allocated by the bank to a batch of different underlying interbank transactions.
      • AAI – Reference number allocated by the bank to one specific interbank transaction.
      • AAJ – Reference number assigned by issuer to a delivery order.
      • AAK – Reference number assigned by issuing party to a despatch advice.
      • AAL – Reference number identifying a specific product drawing.
      • AAM – Reference number assigned to a waybill, see: 1001 = 700.
      • AAN – Reference number assigned by buyer to a delivery schedule.
      • AAO – [1362] Reference number assigned by the consignee to identify a particular consignment.
      • AAP – [1310] Identifier of a shipment which is part of an order.
      • AAQ – [8260] To identify a piece if transport equipment e.g. container or unit load device.
      • AAR – A reference number assigned by a municipality to identify a business.
      • AAS – [1188] Reference number to identify a document evidencing a transport contract.
      • AAT – Identifies the master label number of any package type.

      Showing 20 of 778 values defined for element 1153 in D10B.

    • 1154 – Identifies a reference.
      Type: an, Max Length: 70
    • 1156 – To identify a line of a document.
      Type: an, Max Length: 6
    • 1056 – To identify a version.
      Type: an, Max Length: 9
    • 1060 – To identify a revision.
      Type: an, Max Length: 6
DTM To specify date, and/or time, or period. (Max 5)

Elements and codes as defined at DTM above.

Group SG4 (Max 5)
CUX To specify currencies used in the transaction and relevant details for the rate of exchange. (Max 1) Required
  • C504 – The usage to which a currency relates.
    • 6347 – Code qualifying the usage of a currency.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • 1 – The currency in which charges are to be paid.
      • 2 – The currency applicable to amounts stated. It may have to be converted.
      • 3 – The currency which should be used to the target destination of the transaction.
      • 4 – Currency applicable to amounts stated in a transport document/message.
      • 5 – Currency on which the calculation is based.
      • 6 – Additional currency the message recipient needs for information purposes. The actual message amount(s) is/are not based upon this currency.
      • 7 – Currency in which the account is held.
    • 6345 – Code specifying a monetary unit.
      Type: an, Max Length: 3
    • 6343 – Code qualifying the type of currency.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – The currency of the monetary unit involved in the transaction for customs valuation.
      • 2 – The currency of the monetary unit involved in the transaction for insurance purposes.
      • 3 – The currency of the local monetary unit.
      • 4 – The currency of the monetary unit used for calculation in an invoice.
      • 5 – The currency of the monetary unit of an account.
      • 6 – The currency of the monetary unit to be converted from.
      • 7 – The currency of the monetary unit to be converted into.
      • 8 – The currency of the monetary unit used in a price list.
      • 9 – The currency of the monetary unit used in an order.
      • 10 – The currency of the monetary unit used for pricing purposes.
      • 11 – The currency of the monetary unit used for payment.
      • 12 – The currency of the monetary unit used in a quotation.
      • 13 – The currency of the local monetary unit at recipient's location.
      • 14 – The currency of the monetary unit normally used by the supplier.
      • 15 – The currency of the local monetary unit at sender's location.
      • 16 – The currency as per tariff.
      • 17 – The currency in which the charges are calculated.
      • 18 – The currency in which tax amounts are due or have been paid.
    • 6348 – To specify the value of the multiplication factor used in expressing currency units.
      Type: n, Max Length: 4
  • C504 – The usage to which a currency relates.
    • 6347 – Code qualifying the usage of a currency.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • 1 – The currency in which charges are to be paid.
      • 2 – The currency applicable to amounts stated. It may have to be converted.
      • 3 – The currency which should be used to the target destination of the transaction.
      • 4 – Currency applicable to amounts stated in a transport document/message.
      • 5 – Currency on which the calculation is based.
      • 6 – Additional currency the message recipient needs for information purposes. The actual message amount(s) is/are not based upon this currency.
      • 7 – Currency in which the account is held.
    • 6345 – Code specifying a monetary unit.
      Type: an, Max Length: 3
    • 6343 – Code qualifying the type of currency.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – The currency of the monetary unit involved in the transaction for customs valuation.
      • 2 – The currency of the monetary unit involved in the transaction for insurance purposes.
      • 3 – The currency of the local monetary unit.
      • 4 – The currency of the monetary unit used for calculation in an invoice.
      • 5 – The currency of the monetary unit of an account.
      • 6 – The currency of the monetary unit to be converted from.
      • 7 – The currency of the monetary unit to be converted into.
      • 8 – The currency of the monetary unit used in a price list.
      • 9 – The currency of the monetary unit used in an order.
      • 10 – The currency of the monetary unit used for pricing purposes.
      • 11 – The currency of the monetary unit used for payment.
      • 12 – The currency of the monetary unit used in a quotation.
      • 13 – The currency of the local monetary unit at recipient's location.
      • 14 – The currency of the monetary unit normally used by the supplier.
      • 15 – The currency of the local monetary unit at sender's location.
      • 16 – The currency as per tariff.
      • 17 – The currency in which the charges are calculated.
      • 18 – The currency in which tax amounts are due or have been paid.
    • 6348 – To specify the value of the multiplication factor used in expressing currency units.
      Type: n, Max Length: 4
  • 5402 – To specify the rate at which one specified currency is expressed in another specified currency.
    Type: n, Max Length: 12
  • 6341 – To identify an exchange rate currency market.
    Type: an, Max Length: 3
    Valid Codes:
    • AAA – The currency exchange rate is set by the Paris exchange.
    • AAB – The currency exchange rate is set by the Central Bank of Colombia.
    • AMS – The currency exchange rate is set by the Amsterdam exchange.
    • ARG – Argentina exchange.
    • AST – The currency exchange rate is set by the Australian exchange.
    • AUS – Wiener Boersenkammer.
    • BEL – Commission de la Bourse Bruxelles.
    • CAN – The currency exchange rate is set by the Toronto exchange.
    • CAR – The currency exchange rate is set by a written or spoken agreement between two or more parties.
    • CIE – Currency rates published by the US Customs Information Exchange, 6 WTC, New York NY 10048-0945, USA.
    • DEN – Koebenhavns Fondsboers.
    • ECR – The currency exchange rate is set for a length of time by the European Community.
    • FIN – The currency exchange rate is set by the Helsinki exchange.
    • FRA – The currency exchange rate is set by the Frankfurt exchange.
    • IMF – The currency exchange rate is set by the International Monetary Fund.
    • LNF – The currency exchange rate is set by the London exchange at the first closing.
    • LNS – The currency exchange rate is set by the London exchange at the second closing.
    • MIL – The currency exchange rate is set by the Milan exchange.
    • NOR – The currency exchange rate is set by the Oslo exchange.
    • NYC – The currency exchange rate is set by the New York exchange.

    Showing 20 of 24 values defined for element 6341 in D10B.

DTM To specify date, and/or time, or period. (Max 5)

Elements and codes as defined at DTM above.

Group SG5 (Max 20000) Required
LOC To identify a place or a location and/or related locations. (Max 1) Required
  • C517 – Identification of a location by code or name.
    • 3225 – To identify a location.
      Type: an, Max Length: 35
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

    • 3224 – Name of the location.
      Type: an, Max Length: 256
  • C519 – Identification the first related location by code or name.
    • 3223 – To identify a first related location.
      Type: an, Max Length: 35
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

    • 3222 – Name of first related location.
      Type: an, Max Length: 70
  • C553 – Identification of second related location by code or name.
    • 3233 – To identify a second related location.
      Type: an, Max Length: 35
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

    • 3232 – Name of the second related location.
      Type: an, Max Length: 70
  • 3227 – Code identifying the function of a location.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • 1 – (3018) Point or port of departure, shipment or destination, as required under the applicable terms of delivery, e.g. Incoterms.
    • 2 – [3109] To identify the place where the payment has been or should be made.
    • 3 – Place where equipment tare has been or must be checked for official assessment.
    • 4 – Place at which the goods have been received.
    • 5 – (3214) Port, airport or other location from which a means of transport or transport equipment is scheduled to depart or has departed.
    • 6 – A bed in a ward.
    • 7 – (3246) Place to which the goods are to be finally delivered under transport contract terms (operational term).
    • 8 – Port, airport or other location to which a means of transport or transport equipment is destined.
    • 9 – [3334] Seaport, airport, freight terminal, rail station or other place at which the goods (cargo) are loaded on to the means of transport being used for their carriage.
    • 10 – [3348] Place where the goods are taken over by the carrier.
    • 11 – [3392] Seaport, airport, freight terminal, rail station or other place at which goods are unloaded from the means of transport having been used for their carriage.
    • 12 – Port at which the goods are discharged from the vessel used for their transport.
    • 13 – [3424] Place where goods are to be or have been transferred from one means of transport to another during the course of one transport operation.
    • 14 – [3385] To identify the place where a goods item is located.
    • 15 – Place where the responsibility is transferred.
    • 16 – Place where the ownership of the goods is transferred.
    • 17 – Place where goods are transported across a country border.
    • 18 – [3156] Warehouse where a particular consignment is to be or has been stored.
    • 19 – Factory/plant relevant for a particular consignment.
    • 20 – Place where goods will ultimately be delivered.

    Showing 20 of 297 values defined for element 3227 in D10B.

  • 5479 – Code specifying a relation.
    Type: an, Max Length: 3
DTM To specify date, and/or time, or period. (Max 5)

Elements and codes as defined at DTM above.

Group SG6 (Max 20000)
LIN To identify a line item and configuration. (Max 1) Required
  • C212 – Goods identification for a specified source.
    • 7140 – To identify an item.
      Type: an, Max Length: 35
    • 7143 – Coded identification of an item type.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – Number assigned by manufacturer or seller to identify the release of a product.
      • AB – The item number is that of an assembly.
      • AC – Article identifier used within health sector to indicate data used conforms to HIBC.
      • AD – Number assigned to a cold roll.
      • AE – Number assigned to a hot roll.
      • AF – Number assigned to a slab, which is produced in a particular production step.
      • AG – A number assigned to indicate a revision of software.
      • AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
      • AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
      • AJ – Number assigned to a sample.
      • AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
      • AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
      • AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
      • AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
      • AO – A code which specifies the codification of the state's labelling requirements.
      • AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
      • AQ – A number identifying a coupon.
      • AR – A number to identify a resource.
      • AS – A number to identify a work task.
      • AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.

      Showing 20 of 164 values defined for element 7143 in D10B.

    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

  • C829 – To provide an indication that a segment or segment group is used to contain sub-line or sub-line item information and to optionally enable the sub-line to be identified.
    • 1082 – To identify a line item.
      Type: an, Max Length: 6
  • 1082 – To identify a line item.
    Type: an, Max Length: 6
  • 1229 – Code specifying the action to be taken or already taken.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – The information is to be or has been added.
    • 2 – The information is to be or has been deleted.
    • 3 – The information is to be or has been changed.
    • 4 – This line item is not affected by the actual message.
    • 5 – This line item is entirely accepted by the seller.
    • 6 – This line item is accepted but amended by the seller.
    • 7 – This line item is not accepted by the seller.
    • 8 – Code specifying that the message is a schedule only.
    • 9 – Code specifying that amendments are requested/notified.
    • 10 – This line item is not found in the referenced message.
    • 11 – This line is not amended by the buyer.
    • 12 – Code specifying that the line item numbers have changed.
    • 13 – Buyer has deducted amount from payment.
    • 14 – Buyer has a claim against an outstanding invoice.
    • 15 – Factor has been requested to charge back the outstanding item.
    • 16 – Seller agrees to issue a credit note.
    • 17 – New settlement terms have been agreed.
    • 18 – Factor agrees to abide by the outcome of negotiations between seller and buyer.
    • 19 – Seller does not accept validity of dispute.
    • 20 – The reported situation is settled.

    Showing 20 of 115 values defined for element 1229 in D10B.

  • 1222 – To specify a level within a configuration.
    Type: n, Max Length: 2
  • 7083 – Code specifying the configuration operation.
    Type: an, Max Length: 3
    Valid Codes:
    • A – The operation is to add to the configuration.
    • D – The operation is to delete from the configuration.
    • I – The item is a part of the configuration.
PIA To specify additional or substitutional item identification codes. (Max 5)
  • C212 – Goods identification for a specified source.
    • 7140 – To identify an item.
      Type: an, Max Length: 35
    • 7143 – Coded identification of an item type.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – Number assigned by manufacturer or seller to identify the release of a product.
      • AB – The item number is that of an assembly.
      • AC – Article identifier used within health sector to indicate data used conforms to HIBC.
      • AD – Number assigned to a cold roll.
      • AE – Number assigned to a hot roll.
      • AF – Number assigned to a slab, which is produced in a particular production step.
      • AG – A number assigned to indicate a revision of software.
      • AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
      • AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
      • AJ – Number assigned to a sample.
      • AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
      • AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
      • AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
      • AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
      • AO – A code which specifies the codification of the state's labelling requirements.
      • AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
      • AQ – A number identifying a coupon.
      • AR – A number to identify a resource.
      • AS – A number to identify a work task.
      • AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.

      Showing 20 of 164 values defined for element 7143 in D10B.

    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

  • C212 – Goods identification for a specified source.
    • 7140 – To identify an item.
      Type: an, Max Length: 35
    • 7143 – Coded identification of an item type.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – Number assigned by manufacturer or seller to identify the release of a product.
      • AB – The item number is that of an assembly.
      • AC – Article identifier used within health sector to indicate data used conforms to HIBC.
      • AD – Number assigned to a cold roll.
      • AE – Number assigned to a hot roll.
      • AF – Number assigned to a slab, which is produced in a particular production step.
      • AG – A number assigned to indicate a revision of software.
      • AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
      • AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
      • AJ – Number assigned to a sample.
      • AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
      • AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
      • AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
      • AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
      • AO – A code which specifies the codification of the state's labelling requirements.
      • AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
      • AQ – A number identifying a coupon.
      • AR – A number to identify a resource.
      • AS – A number to identify a work task.
      • AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.

      Showing 20 of 164 values defined for element 7143 in D10B.

    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

  • C212 – Goods identification for a specified source.
    • 7140 – To identify an item.
      Type: an, Max Length: 35
    • 7143 – Coded identification of an item type.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – Number assigned by manufacturer or seller to identify the release of a product.
      • AB – The item number is that of an assembly.
      • AC – Article identifier used within health sector to indicate data used conforms to HIBC.
      • AD – Number assigned to a cold roll.
      • AE – Number assigned to a hot roll.
      • AF – Number assigned to a slab, which is produced in a particular production step.
      • AG – A number assigned to indicate a revision of software.
      • AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
      • AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
      • AJ – Number assigned to a sample.
      • AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
      • AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
      • AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
      • AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
      • AO – A code which specifies the codification of the state's labelling requirements.
      • AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
      • AQ – A number identifying a coupon.
      • AR – A number to identify a resource.
      • AS – A number to identify a work task.
      • AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.

      Showing 20 of 164 values defined for element 7143 in D10B.

    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

  • C212 – Goods identification for a specified source.
    • 7140 – To identify an item.
      Type: an, Max Length: 35
    • 7143 – Coded identification of an item type.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – Number assigned by manufacturer or seller to identify the release of a product.
      • AB – The item number is that of an assembly.
      • AC – Article identifier used within health sector to indicate data used conforms to HIBC.
      • AD – Number assigned to a cold roll.
      • AE – Number assigned to a hot roll.
      • AF – Number assigned to a slab, which is produced in a particular production step.
      • AG – A number assigned to indicate a revision of software.
      • AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
      • AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
      • AJ – Number assigned to a sample.
      • AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
      • AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
      • AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
      • AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
      • AO – A code which specifies the codification of the state's labelling requirements.
      • AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
      • AQ – A number identifying a coupon.
      • AR – A number to identify a resource.
      • AS – A number to identify a work task.
      • AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.

      Showing 20 of 164 values defined for element 7143 in D10B.

    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

  • C212 – Goods identification for a specified source.
    • 7140 – To identify an item.
      Type: an, Max Length: 35
    • 7143 – Coded identification of an item type.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – Number assigned by manufacturer or seller to identify the release of a product.
      • AB – The item number is that of an assembly.
      • AC – Article identifier used within health sector to indicate data used conforms to HIBC.
      • AD – Number assigned to a cold roll.
      • AE – Number assigned to a hot roll.
      • AF – Number assigned to a slab, which is produced in a particular production step.
      • AG – A number assigned to indicate a revision of software.
      • AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
      • AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
      • AJ – Number assigned to a sample.
      • AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
      • AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
      • AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
      • AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
      • AO – A code which specifies the codification of the state's labelling requirements.
      • AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
      • AQ – A number identifying a coupon.
      • AR – A number to identify a resource.
      • AS – A number to identify a work task.
      • AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.

      Showing 20 of 164 values defined for element 7143 in D10B.

    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

  • 4347 – Code qualifying the product identifier.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • 1 – Information which specifies and qualifies product identifications.
    • 2 – The item number describes the potential substitute product.
    • 3 – The given item number is the number of the product that substitutes another one.
    • 4 – The given item number is the number of the original product substituted by another.
    • 5 – The item number is for product identification.
    • 6 – Product id of the product that will follow the one currently in production/trade.
    • 7 – Product id of the predecessor of the product currently in production/trade.
    • 8 – The given item number is the expired item number of the product. It has been replaced.
    • 9 – Code indicating the deletion of a secondary identification.
    • 10 – Identification of a defective part.
    • 11 – Identification of a repaired part.
    • 12 – Alternate number to identify the product.
    • 13 – Used to indicate which trade item the promotional trade item replaces or coexists alongside. To enable the identification of the two trade items to be linked providing access to their information.
IMD To describe an item in either an industry or free format. (Max 5)
  • C272 – To provide the characteristic of the item being described.
    • 7081 – Code specifying the characteristic of an item.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Product in conformity with specifications.
      • 2 – Description of general product form.
      • 3 – Product without quality control when received.
      • 4 – Description of the finish required/available on the product.
      • 5 – Description of what the end use application of the product will be.
      • 6 – Description of the method of construction.
      • 7 – A drug name specially given in order that it may be freely used without legal restriction.
      • 8 – The characteristic of a product.
      • 9 – Description of a sub-product.
      • 10 – Specifies the direction of the grain of the product.
      • 11 – Item characteristic is described following Customs specifications.
      • 12 – Description of the type and/or process involved in making the product. E.g. in steel, description of the steelmaking process.
      • 13 – The degree of excellence of a thing.
      • 14 – Description of the surface condition (e.g. roughness) of the product.
      • 15 – Description of any heat treatment or annealing required/performed on the product.
      • 16 – A code identifying a size system, comprising a set of sizes.
      • 17 – Description of any special coating required/available on the product.
      • 18 – Description of any chemical surface treatment required/performed on the product.
      • 19 – Description of any mechanical surface treatment required/performed on the product.
      • 20 – Type of transfer capacity.

      Showing 20 of 227 values defined for element 7081 in D10B.

    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

  • C273 – Description of an item.
    • 7009 – Code specifying an item.
      Type: an, Max Length: 17
      Valid Codes:
      • 1 – Displayed text is bold.
      • 2 – Displayed text is dimmed.
      • 3 – Displayed text is italicised.
      • 4 – Displayed text is normal.
      • 5 – Displayed text foreground and background colours are reversed.
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

    • 7008 – Free form description of an item.
      Type: an, Max Length: 256
    • 7008 – Free form description of an item.
      Type: an, Max Length: 256
    • 3453 – Code specifying the language name.
      Type: an, Max Length: 3
  • 7077 – Code specifying the format of a description.
    Type: an, Max Length: 3
    Valid Codes:
    • A – Long description of an item in free form.
    • B – Description of an item in coded and free form text.
    • C – Description of an item in coded format.
    • D – Price look-up description of a product for point of sale receipts.
    • E – Short description of an item in free form.
    • F – Description of an item in free form text.
    • S – Description of an item in a structured format.
    • X – Description of an item in a coded and free text format.
  • 7383 – Code specifying the surface or layer of an object.
    Type: an, Max Length: 3
    Valid Codes:
    • 1S – The location is side one.
    • 2S – The location is side two.
    • AA – To indicate that the entity being specified is on the surface.
    • AB – To indicate that the entity being specified is off the surface.
    • AC – Specifies that the surface/layer/position being described is the soluble portion.
    • AD – The surface or layer of the product being described is the opposite corners.
    • AE – The surface or layer of the product being described are the corner diagonals.
    • AF – The left-hand side (looking forward) of a ship, boat or aircraft.
    • AG – The right-hand side (looking forward) of a ship, boat or aircraft.
    • AH – Surface of a tooth directed toward the face and opposite the lingual surface.
    • AI – Surface of the tooth relating to the cutting edge of the anterior teeth, incisors or canines.
    • AJ – Surface of the tooth toward the back of the dental arch, or away from the midline.
    • AK – Surface of the tooth pertaining to or around the cheek.
    • AL – Surface of the tooth pertaining to the masticating surfaces of the posterior teeth.
    • AM – Surface of the tooth pertaining to or around the tongue.
    • AN – Surface of the tooth toward the midline of the dental arch.
    • BC – The location is at the back of the cab.
    • BS – The location is both sides.
    • BT – The location is on the bottom.
    • DF – The location is in the dual fuel tank positions.

    Showing 20 of 33 values defined for element 7383 in D10B.

PAC To describe the number and type of packages/physical units. (Max 5)
  • C531 – Packaging level and details, terms and conditions.
    • 7075 – Code specifying a level of packaging.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Level of packing, if it exists, that is immediately subordinate to the intermediate packaging level.
      • 2 – Level of packaging, if it exists, that is immediately subordinate to the outer packaging level.
      • 3 – For packed merchandise, outermost level of packaging for a shipment.
      • 4 – There is no specifiable level of packaging: packaging is inner and outer level as well.
      • 5 – The packaging level being described is the shipment level.
    • 7233 – Code specifying information related to packaging.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – The ingredients of the product are not marked on the packaging of the product.
      • 2 – The product price is not marked on the packaging of the product.
      • 3 – The product best before date is not marked on the packaging of the product.
      • 4 – Package is not marked as recyclable.
      • 5 – A code indicating that promotional details have been marked on the package.
      • 6 – The item is labeled according to the general EAN.UCC specifications for clothing and fashion accessories.
      • 7 – The package is marked with the last date on which the item may be sold.
      • 8 – The package is marked with the last date on which the item may be used.
      • 9 – The package is marked with the date of the packaging or manufacturing of the item.
      • 10 – Package is not marked with any kind of date indicating freshness, such as use-by, best before or packaging date.
      • 31 – Package is marked with the product best before date.
      • 32 – The package is marked recyclable.
      • 33 – The package is marked returnable.
      • 34 – The information is related to product marking.
      • 35 – The information is related to the type of package.
      • 36 – The information specifies the package.
      • 37 – The information is related to protection of the package.
      • 38 – The information describes how coverage with tarpaulins is to be provided.
      • 39 – The information describes the platform or skid location.
      • 40 – The information gives the location of the load bearing piece.

      Showing 20 of 62 values defined for element 7233 in D10B.

    • 7073 – Code specifying the packaging terms and conditions.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – The cost of packaging is paid by the supplier.
      • 2 – The cost of packaging is paid by the recipient.
      • 3 – There is no charge for packaging because it is returnable.
      • 4 – The packaging terms and conditions are specified by the buyer.
      • 5 – Reusable packaging owned by the carrier.
      • 6 – Disposable packaging supplied by the carrier.
      • 7 – Reusable packaging owned by the seller.
      • 8 – Disposable packaging supplied by the seller.
      • 9 – Reusable packaging specifically designed for packaging of the referenced item and owned by the buyer.
      • 10 – Disposable packaging specifically designed for packaging of the referenced item.
      • 11 – Reusable multi-purpose packaging owned by the buyer.
      • 12 – Reusable multi-purpose packaging owned by the seller.
      • 13 – The referenced item is to be supplied without packaging.
      • 14 – Non-standard reusable packaging owned by the seller.
      • 15 – The packaging used must meet durability and handling characteristics required for item export.
      • 16 – The packaging used must meet durability and handling characteristics required for domestic usage.
      • 17 – The cost of packaging is included in the item price.
      • 18 – The cost of packaging is shared equally between the buyer and seller.
      • 19 – The packaging cost will be invoiced on a separate message or document.
      • 20 – The packaging is free of charge.

      Showing 20 of 30 values defined for element 7073 in D10B.

  • C202 – Type of package by name or by code from a specified source.
    • 7065 – Code specifying the type of package.
      Type: an, Max Length: 17
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

    • 7064 – Description of the form in which goods are presented.
      Type: an, Max Length: 35
  • C402 – Identification of the form in which goods are described.
    • 7077 – Code specifying the format of a description.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • A – Long description of an item in free form.
      • B – Description of an item in coded and free form text.
      • C – Description of an item in coded format.
      • D – Price look-up description of a product for point of sale receipts.
      • E – Short description of an item in free form.
      • F – Description of an item in free form text.
      • S – Description of an item in a structured format.
      • X – Description of an item in a coded and free text format.
    • 7064 – Description of the form in which goods are presented.
      Type: an, Max Length: 35 (Required)
    • 7143 – Coded identification of an item type.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – Number assigned by manufacturer or seller to identify the release of a product.
      • AB – The item number is that of an assembly.
      • AC – Article identifier used within health sector to indicate data used conforms to HIBC.
      • AD – Number assigned to a cold roll.
      • AE – Number assigned to a hot roll.
      • AF – Number assigned to a slab, which is produced in a particular production step.
      • AG – A number assigned to indicate a revision of software.
      • AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
      • AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
      • AJ – Number assigned to a sample.
      • AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
      • AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
      • AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
      • AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
      • AO – A code which specifies the codification of the state's labelling requirements.
      • AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
      • AQ – A number identifying a coupon.
      • AR – A number to identify a resource.
      • AS – A number to identify a work task.
      • AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.

      Showing 20 of 164 values defined for element 7143 in D10B.

    • 7064 – Description of the form in which goods are presented.
      Type: an, Max Length: 35
    • 7143 – Coded identification of an item type.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – Number assigned by manufacturer or seller to identify the release of a product.
      • AB – The item number is that of an assembly.
      • AC – Article identifier used within health sector to indicate data used conforms to HIBC.
      • AD – Number assigned to a cold roll.
      • AE – Number assigned to a hot roll.
      • AF – Number assigned to a slab, which is produced in a particular production step.
      • AG – A number assigned to indicate a revision of software.
      • AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
      • AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
      • AJ – Number assigned to a sample.
      • AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
      • AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
      • AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
      • AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
      • AO – A code which specifies the codification of the state's labelling requirements.
      • AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
      • AQ – A number identifying a coupon.
      • AR – A number to identify a resource.
      • AS – A number to identify a work task.
      • AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.

      Showing 20 of 164 values defined for element 7143 in D10B.

  • C532 – Indication of responsibility for payment and load contents of returnable packages.
    • 8395 – Code specifying the responsibility for the freight payment for a returnable package.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – The freight charges involved with returning of the packaging are to be paid by the customer.
      • 2 – There is no charge for the freight of returning the packaging.
      • 3 – The responsibility for the freight for returning the packaging is to be paid by the supplier.
      • ZZZ – A code assigned within a code list to be used on an interim basis and as defined among trading partners until a precise code can be assigned to the code list.
    • 8393 – Code specifying the load contents for a returnable package.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Loaded with empty 4-block for blocking purposes.
      • 2 – The container is, has been, or will be returned with dunnage only.
      • 3 – The container is, has been, or will be returned empty.
      • 4 – The package is, has been, or will be returned loaded with production material.
      • 6 – The package is, has been, or will be returned loaded with obsolete material.
      • 7 – The package is, has been, or will be returned loaded with excess production material.
      • 8 – The package is, has been, or will be returned loaded with rejected material.
      • 10 – The package is, has been, or will be returned loaded with processed material.
      • 11 – An empty container, which is folded.
  • 7224 – To specify the number of packages.
    Type: n, Max Length: 8
RFF To specify a reference. (Max 5)

Elements and codes as defined at RFF above.

DOC To identify documents and details directly related to it. (Max 5)
  • C002 – Identification of a type of document/message by code or name. Code preferred.
    • 1001 – Code specifying the document name.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Certificate providing the values of an analysis.
      • 2 – Certificate certifying the conformity to predefined definitions.
      • 3 – Certificate certifying the quality of goods, services etc.
      • 4 – Report providing the results of a test session.
      • 5 – Report specifying the performance values of products.
      • 6 – Report providing specification values of products.
      • 7 – Reports on events during production process.
      • 8 – Document/message describes the test report of the first sample.
      • 9 – A document/message to enable the transmission of information regarding pricing and catalogue details for goods and services offered by a seller to a buyer.
      • 10 – Document/message providing basic data concerning a party.
      • 11 – A pre-approved document relating to federal label approval requirements.
      • 12 – Certificate certifying a specific quality of agricultural products.
      • 13 – Document/message which evidences the transport of goods by post (e.g. mail, parcel, etc.).
      • 14 – Certificate certifying the weight of goods.
      • 15 – Document/message specifying the weight of goods.
      • 16 – Document by means of which the documentary credit applicant specifies the conditions for the certificate and by whom the certificate is to be issued.
      • 17 – Document identifying goods in which the issuing authority expressly certifies that the goods originate in a specific country or part of, or group of countries. It also states the price and/or cost of the goods with the purpose of determining the customs origin.
      • 18 – Specific form of transit declaration issued by the exporter (movement certificate).
      • 19 – Certificate certifying the quantity of goods, services etc.
      • 20 – Usage of QALITY-message.

      Showing 20 of 675 values defined for element 1001 in D10B.

    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

    • 1000 – Name of a document.
      Type: an, Max Length: 35
  • C503 – Identification of document/message by number, status, source and/or language.
    • 1004 – To identify a document.
      Type: an, Max Length: 70
    • 1373 – Code specifying the status of a document.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – The specified document is accepted.
      • 2 – Notice that a specific document will be accompanying the goods.
      • 3 – The specified document is conditionally accepted.
      • 4 – Notice that a specific document/message will be transmitted via a separate EDI message.
      • 5 – Notice that the specific document or message is for information only.
      • 6 – Notice that a specific document or message will not be sent via EDI.
      • 7 – Request for a specific message to be formatted and transmitted or a request for a specific document to be raised and sent.
      • 8 – The specified document is rejected.
      • 9 – The document or message is to be printed.
      • 10 – Specific document is currently valid.
      • 11 – Specified document is not available.
      • 12 – Customs declaration to which the document is related completed or exhaust the allowance stated on the document. The document is attached to the Customs declaration.
      • 13 – Customs declaration to which the document is related does not complete or exhaust the allowance stated on the document . The document is not attached to the declaration but has already been lodged in the Customs station.
      • 14 – Customs declaration to which the document is related completed or exhaust the allowance stated on the document. The usage of the document is complete. The document is not attached to the declaration but has already been lodged in the Customs station.
      • 15 – Customs declaration to which the document is related does not complete or exhaust the allowance stated on the document. The document can continue to be used for future declarations until the allowance is exhausted. The document is not attached to the declaration but has already been lodged in the Customs station.
      • 16 – Specified document is not or cannot be attached.
      • 17 – Document not attached to the Customs declaration but is attached to the goods.
      • 18 – Specified document is attached to the Customs declaration and will be required to be returned to the declarant after Customs endorsement.
      • 19 – Application has been submitted for that document.
      • 20 – Indicates that the document has legal validity from the date of receival of the cargo.

      Showing 20 of 37 values defined for element 1373 in D10B.

    • 1366 – Free form description of the source of a document.
      Type: an, Max Length: 70
    • 3453 – Code specifying the language name.
      Type: an, Max Length: 3
    • 1056 – To identify a version.
      Type: an, Max Length: 9
    • 1060 – To identify a revision.
      Type: an, Max Length: 6
  • 3153 – Code specifying the type of communication medium.
    Type: an, Max Length: 3
    Valid Codes:
    • AA – A process that, on demand, connects two or more data terminal equipments and permits the exclusive use of a data circuit between them until the connection is released (ISO).
    • AB – Communications number assigned by Societe Internationale de Telecommunications Aeronautiques (SITA).
    • AC – Communications number assigned by Aeronautical Radio Inc.
    • AD – A communication channel identifying a courier.
    • AE – Express (e.g. overnight) postal service document delivery.
    • CA – The cable is used as communication medium.
    • EI – Number identifying the service and service user.
    • EM – Exchange of mail by electronic means.
    • EX – Telephone extension.
    • FT – According to ISO.
    • FX – Device used for transmitting and reproducing fixed graphic material (as printing) by means of signals over telephone lines or other electronic transmission media.
    • GM – GEIS mailbox system is used as communication medium.
    • IE – IBM IE is used as communication medium.
    • IM – Internal mail address/number.
    • MA – Postal service document delivery.
    • PB – Postbox system is used as communication medium.
    • PS – The process of routing and transferring data by means of addressed packets so that a channel is occupied only during the transmission; upon completion of the transmission the channel is made available for the transfer of other packets (ISO).
    • SW – Communications address assigned by Society for Worldwide Interbank Financial Telecommunications s.c.
    • TE – Voice/data transmission by telephone.
    • TG – Text transmission via telegraph.

    Showing 20 of 25 values defined for element 3153 in D10B.

  • 1220 – Quantity of document copies required.
    Type: n, Max Length: 2
  • 1218 – Quantity of document originals required.
    Type: n, Max Length: 2
ALI To indicate that special conditions due to the origin, customs preference, fiscal or commercial factors are applicable. (Max 5)
  • 3239 – To identify the country in which the goods have been produced or manufactured, according to criteria laid down for the application of the Customs tariff or quantitative restrictions, or any measure related to trade.
    Type: an, Max Length: 3
  • 9213 – Code specifying a type of duty regime.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – Origin of the product is subject to EC/EFTA (European Commission European Free Trade Association).
    • 2 – Origin of the product is subject to other preference agreement.
    • 3 – Origin of the product is not subject to any preference.
    • 8 – Origin of the product is excluded.
    • 9 – Origin of the product is imposed.
  • 4183 – Code specifying a special condition.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – Item concerned is applicable to national preference calculation.
    • 2 – Item concerned is applicable for settlement/payment discount calculation.
    • 3 – Item concerned is not applicable for settlement/payment discount calculation.
    • 4 – Urgent delivery of goods for which a reservation was made.
    • 5 – Item concerned is not applicable for bonus calculation.
    • 6 – Item concerned is applicable for bonus calculation.
    • 7 – Item concerned is applicable for commission calculation.
    • 8 – Item concerned is applicable for discount calculation.
    • 9 – Item should be available freely within the European Economic Community.
    • 10 – Item concerned is applicable for the overall settlement discount.
    • 11 – The stated price is inclusive of excise.
    • 12 – The stated price is inclusive of tax.
    • 13 – The stated price is inclusive of duty.
    • 14 – Item concerned is not applicable for commission calculation.
    • 15 – Item concerned is not applicable for discount calculation.
    • 16 – Item concerned is subject to embargo restriction.
    • 17 – Item concerned is not subject to embargo restriction.
    • 18 – Item concerned requires export declaration.
    • 19 – Item concerned does not require export declaration.
    • 20 – Item concerned is liable to import restrictions defined by relevant national authority.

    Showing 20 of 207 values defined for element 4183 in D10B.

  • 4183 – Code specifying a special condition.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – Item concerned is applicable to national preference calculation.
    • 2 – Item concerned is applicable for settlement/payment discount calculation.
    • 3 – Item concerned is not applicable for settlement/payment discount calculation.
    • 4 – Urgent delivery of goods for which a reservation was made.
    • 5 – Item concerned is not applicable for bonus calculation.
    • 6 – Item concerned is applicable for bonus calculation.
    • 7 – Item concerned is applicable for commission calculation.
    • 8 – Item concerned is applicable for discount calculation.
    • 9 – Item should be available freely within the European Economic Community.
    • 10 – Item concerned is applicable for the overall settlement discount.
    • 11 – The stated price is inclusive of excise.
    • 12 – The stated price is inclusive of tax.
    • 13 – The stated price is inclusive of duty.
    • 14 – Item concerned is not applicable for commission calculation.
    • 15 – Item concerned is not applicable for discount calculation.
    • 16 – Item concerned is subject to embargo restriction.
    • 17 – Item concerned is not subject to embargo restriction.
    • 18 – Item concerned requires export declaration.
    • 19 – Item concerned does not require export declaration.
    • 20 – Item concerned is liable to import restrictions defined by relevant national authority.

    Showing 20 of 207 values defined for element 4183 in D10B.

  • 4183 – Code specifying a special condition.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – Item concerned is applicable to national preference calculation.
    • 2 – Item concerned is applicable for settlement/payment discount calculation.
    • 3 – Item concerned is not applicable for settlement/payment discount calculation.
    • 4 – Urgent delivery of goods for which a reservation was made.
    • 5 – Item concerned is not applicable for bonus calculation.
    • 6 – Item concerned is applicable for bonus calculation.
    • 7 – Item concerned is applicable for commission calculation.
    • 8 – Item concerned is applicable for discount calculation.
    • 9 – Item should be available freely within the European Economic Community.
    • 10 – Item concerned is applicable for the overall settlement discount.
    • 11 – The stated price is inclusive of excise.
    • 12 – The stated price is inclusive of tax.
    • 13 – The stated price is inclusive of duty.
    • 14 – Item concerned is not applicable for commission calculation.
    • 15 – Item concerned is not applicable for discount calculation.
    • 16 – Item concerned is subject to embargo restriction.
    • 17 – Item concerned is not subject to embargo restriction.
    • 18 – Item concerned requires export declaration.
    • 19 – Item concerned does not require export declaration.
    • 20 – Item concerned is liable to import restrictions defined by relevant national authority.

    Showing 20 of 207 values defined for element 4183 in D10B.

  • 4183 – Code specifying a special condition.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – Item concerned is applicable to national preference calculation.
    • 2 – Item concerned is applicable for settlement/payment discount calculation.
    • 3 – Item concerned is not applicable for settlement/payment discount calculation.
    • 4 – Urgent delivery of goods for which a reservation was made.
    • 5 – Item concerned is not applicable for bonus calculation.
    • 6 – Item concerned is applicable for bonus calculation.
    • 7 – Item concerned is applicable for commission calculation.
    • 8 – Item concerned is applicable for discount calculation.
    • 9 – Item should be available freely within the European Economic Community.
    • 10 – Item concerned is applicable for the overall settlement discount.
    • 11 – The stated price is inclusive of excise.
    • 12 – The stated price is inclusive of tax.
    • 13 – The stated price is inclusive of duty.
    • 14 – Item concerned is not applicable for commission calculation.
    • 15 – Item concerned is not applicable for discount calculation.
    • 16 – Item concerned is subject to embargo restriction.
    • 17 – Item concerned is not subject to embargo restriction.
    • 18 – Item concerned requires export declaration.
    • 19 – Item concerned does not require export declaration.
    • 20 – Item concerned is liable to import restrictions defined by relevant national authority.

    Showing 20 of 207 values defined for element 4183 in D10B.

  • 4183 – Code specifying a special condition.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – Item concerned is applicable to national preference calculation.
    • 2 – Item concerned is applicable for settlement/payment discount calculation.
    • 3 – Item concerned is not applicable for settlement/payment discount calculation.
    • 4 – Urgent delivery of goods for which a reservation was made.
    • 5 – Item concerned is not applicable for bonus calculation.
    • 6 – Item concerned is applicable for bonus calculation.
    • 7 – Item concerned is applicable for commission calculation.
    • 8 – Item concerned is applicable for discount calculation.
    • 9 – Item should be available freely within the European Economic Community.
    • 10 – Item concerned is applicable for the overall settlement discount.
    • 11 – The stated price is inclusive of excise.
    • 12 – The stated price is inclusive of tax.
    • 13 – The stated price is inclusive of duty.
    • 14 – Item concerned is not applicable for commission calculation.
    • 15 – Item concerned is not applicable for discount calculation.
    • 16 – Item concerned is subject to embargo restriction.
    • 17 – Item concerned is not subject to embargo restriction.
    • 18 – Item concerned requires export declaration.
    • 19 – Item concerned does not require export declaration.
    • 20 – Item concerned is liable to import restrictions defined by relevant national authority.

    Showing 20 of 207 values defined for element 4183 in D10B.

MOA To specify a monetary amount. (Max 5)
  • C516 – Amount of goods or services stated as a monetary amount in a specified currency.
    • 5025 – Code qualifying the type of monetary amount.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • 1 – First VAT value if, for the same rate of VAT, there are 1 to 3 different ways to set this value.
      • 2 – Second VAT value if, for the same rate of VAT, there are 2 or 3 different ways to set this value.
      • 3 – Third VAT value if, for the same rate of VAT, there are 3 different ways to set this value.
      • 4 – Royalties relating to the imported goods that the buyer must pay, either directly or indirectly, as a condition of sale, to the extent that they are not included in the price actually paid or payable.
      • 5 – The amount specified is the adjusted amount.
      • 6 – The owing amount in the currency used as reference in the transaction.
      • 7 – Charges which parties agreed upon.
      • 8 – Total amount of allowance or charge.
      • 9 – Amount to be paid.
      • 10 – Indicates that the amount is based on the charged currency.
      • 11 – Amount that has been paid.
      • 12 – Amount which was remitted (see remittance advice).
      • 13 – The amount is subject to a total monetary discount.
      • 14 – The amount in the currency in which the amount is paid or has to be paid.
      • 15 – The addition of the balance all accounts divided by the number of accounts.
      • 16 – The fee that a bank charges for releasing monies.
      • 17 – The complete quantity of anything needed for or made in one operation or lot.
      • 18 – Fee charged by a broker for acting on behalf of a third party.
      • 19 – Commission paid by the importer to his/her agent for the service of representing him/her in the purchase.
      • 20 – Value of data contained on the carrier media (e.g. magnetic tape).

      Showing 20 of 541 values defined for element 5025 in D10B.

    • 5004 – To specify a monetary amount.
      Type: n, Max Length: 35
    • 6345 – Code specifying a monetary unit.
      Type: an, Max Length: 3
    • 6343 – Code qualifying the type of currency.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – The currency of the monetary unit involved in the transaction for customs valuation.
      • 2 – The currency of the monetary unit involved in the transaction for insurance purposes.
      • 3 – The currency of the local monetary unit.
      • 4 – The currency of the monetary unit used for calculation in an invoice.
      • 5 – The currency of the monetary unit of an account.
      • 6 – The currency of the monetary unit to be converted from.
      • 7 – The currency of the monetary unit to be converted into.
      • 8 – The currency of the monetary unit used in a price list.
      • 9 – The currency of the monetary unit used in an order.
      • 10 – The currency of the monetary unit used for pricing purposes.
      • 11 – The currency of the monetary unit used for payment.
      • 12 – The currency of the monetary unit used in a quotation.
      • 13 – The currency of the local monetary unit at recipient's location.
      • 14 – The currency of the monetary unit normally used by the supplier.
      • 15 – The currency of the local monetary unit at sender's location.
      • 16 – The currency as per tariff.
      • 17 – The currency in which the charges are calculated.
      • 18 – The currency in which tax amounts are due or have been paid.
    • 4405 – Code specifying a status.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Remark that the requested service in the order remains outstanding.
      • 2 – The instruction has been completed.
      • 3 – The information has been passed on.
      • 4 – The amount has the status of finality.
      • 5 – The amount is subject to finality.
      • 6 – The amount quoted is a minimum tariff.
      • 7 – The amount quoted is a fixed tariff.
      • 8 – The amount quoted is a maximum tariff.
      • 9 – The amount is quoted for information only, it is not part of the charges to be deducted or added.
      • 10 – The amount is available today.
      • 11 – The amount is available on the next banking office day after the booking date.
      • 12 – The amount is available on the second banking office day after the booking date.
      • 13 – The amount available on the third banking office day after the booking date.
      • 14 – Funds not collected by beneficiary.
      • 15 – The amount or quantity is zero.
      • 16 – No status or condition has been advised.
      • 17 – A status or condition has been requested.
      • 18 – No charge is to be made.
      • 19 – The quantity has been the subject of a rounding operation.
      • 20 – Intended to last or function indefinitely.

      Showing 20 of 145 values defined for element 4405 in D10B.

PRI To specify price information. (Max 5)
  • C509 – Identification of price type, price and related details.
    • 5125 – Code qualifying a price.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • AAA – The price stated is the net price including allowances/ charges. Allowances/charges may be stated for information only.
      • AAB – The price stated is the gross price to which allowances/ charges must be applied.
      • AAC – The price does not include the allowances and charges, but includes the taxes.
      • AAD – Average selling price of a product.
      • AAE – The price stated is for information purposes only and excludes all allowances and charges. Taxes however are included in the price.
      • AAF – The price stated is for information purposes only and excludes all allowances, charges and taxes.
      • AAG – A code to indicate that the price described is an additive component of the total price.
      • CAL – The price stated is the price for the calculation of the line item amount.
      • INF – The price is provided for information.
      • INV – Referenced price taken from an invoice.
      • ZZZ – A code assigned within a code list to be used on an interim basis and as defined among trading partners until a precise code can be assigned to the code list.
    • 5118 – To specify a price.
      Type: n, Max Length: 15
    • 5375 – Code specifying the type of price.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – Price authorized to be charged in the event of an order being cancelled.
      • AB – To indicate that the price applies per ton.
      • AC – A code to identify the price when the minimum number is purchased.
      • AD – A code to identify a price for the export market.
      • AE – A code identifying the price for a specific range of purchase quantities.
      • AI – The price is referring to the active ingredient.
      • AQ – The price is referring to the measured quantity.
      • CA – Code specifying the catalogue price.
      • CT – Code specifying the contract price.
      • CU – The price is referring to the consumer unit.
      • DI – Code specifying the distributor price.
      • EC – Price registered at European Commission Steel and Carbon office (DG III).
      • NW – Code specifying the net weight price.
      • PC – Code specifying the catalogue price.
      • PE – Code specifying the price per item.
      • PK – Code specifying the price per kilogram.
      • PL – Code specifying the price per litre.
      • PT – Code specifying the price per tonne.
      • PU – Code specifying the price per specified unit.
      • PV – Code specifying a provisional price.

      Showing 20 of 28 values defined for element 5375 in D10B.

    • 5387 – Code identifying pricing specification.
      Type: an, Max Length: 3
      Valid Codes:
      • AAA – Code identifying a reference price.
      • AAB – Code specifying that the price is inclusive of tax.
      • AAC – The suggested retail price as suggested or determined by the party purchasing the goods.
      • AAD – The charges imposed by the ocean transportation industry above and beyond the basic freight.
      • AAE – Not subject to escalation or adjustment.
      • AAF – Subject to increase or development by successive stages.
      • AAG – Code specifying that the price is subject to adjustment.
      • AAH – Subject to increase or development by successive stages and price adjustment.
      • AAI – Code specifying that the fluctuation conditions are not identified.
      • AAJ – Firm price for specified work.
      • AAK – A price valid from an effective date/time/period.
      • AAL – A price valid prior to an effective date/time/period of a new price.
      • AAM – To indicate that the given price applies per week.
      • AAN – Price can be obtained on request from seller.
      • AAO – The price given is the price of the item without packaging.
      • AAP – Discount price available to all customers except the retail customer.
      • AAQ – Price which will remain unchanged for a given time period.
      • AAR – The per unit cost of referenced material based on a given quotation for that material.
      • AAS – The labour component of the per-unit item price.
      • AAT – The transport component of the per-unit item price.

      Showing 20 of 103 values defined for element 5387 in D10B.

    • 5284 – To specify the basis for a unit price.
      Type: n, Max Length: 9
    • 6411 – Code specifying the unit of measurement.
      Type: an, Max Length: 8
  • 5213 – Code specifying the price change operation for a sub- line item.
    Type: an, Max Length: 3
    Valid Codes:
    • A – Price is to be added to the base line unit price.
    • I – Price is included in the base line unit price.
    • S – Price is to be subtracted from the base line unit price.
Group SG7 (Max 999)
QTY To specify a pertinent quantity. (Max 1) Required
  • C186 – Quantity information in a transaction, qualified when relevant.
    • 6063 – Code qualifying the type of quantity.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • 1 – Individually separated and distinct quantity.
      • 2 – Quantity relevant for charge.
      • 3 – Quantity accumulated.
      • 4 – Interest for overdrawing the account.
      • 5 – The dosage of active ingredient per unit.
      • 6 – The number of entities that audit accounts.
      • 7 – The number of branch locations being leased by an entity.
      • 8 – Quantity of goods which the customer requires the supplier to have in inventory and which may be inspected by the customer if desired.
      • 9 – The number of branch locations owned by an entity.
      • 10 – The number of judgements registered against an entity.
      • 11 – Part of the whole quantity.
      • 12 – Quantity despatched by the seller.
      • 13 – The number of liens registered against an entity.
      • 14 – The number of animals kept for use or profit.
      • 15 – The number of cheques returned due to insufficient funds.
      • 16 – The number of stolen cheques.
      • 17 – The total quantity of a product on hand at a location. This includes as well units awaiting return to manufacturer, units unavailable due to inspection procedures and undamaged stock available for despatch, resale or use.
      • 18 – Quantity previously referenced.
      • 19 – The number of security shares issued and for which full payment has been made.
      • 20 – Quantity not usable.

      Showing 20 of 490 values defined for element 6063 in D10B.

    • 6060 – Alphanumeric representation of a quantity.
      Type: an, Max Length: 35 (Required)
    • 6411 – Code specifying the unit of measurement.
      Type: an, Max Length: 8
MKS To specify to which market and/or through which sales distribution channel and/or for which end- use the sales of product/service have been made or are given as forecast. (Max 1)
  • C332 – Identification of sales channel for marketing data, sales, forecast, planning...
    • 3496 – To identify a sales channel.
      Type: an, Max Length: 17 (Required)
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

  • 7293 – Code qualifying identification of a subject area.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • 1 – The specified conditions apply within the construction industry.
    • 2 – The specified conditions apply within the government export sector.
    • 3 – The specified conditions apply within the chemical industry.
    • 4 – The specified conditions apply within the electronics industry.
    • 5 – The specified conditions apply within the automotive industry.
    • 6 – The specified conditions apply within the steel industry.
    • 7 – Factoring industry.
    • 8 – A code to identify the defence industry.
    • 9 – Alcohol beverage industry.
    • 10 – Applies to police formalities.
    • 11 – Applies to customs regulations.
    • 12 – Applies to health regulation.
    • 13 – Balance of payments.
    • 14 – National regulations specified by the relevant government.
    • 15 – To identify requirements and conditions applicable to government activity.
    • 16 – Subject refers to standards implementation.
    • 17 – The information is related to insurance.
    • 18 – Applies to credit inquiry.
    • 19 – Applies to a general request.
    • 20 – Applies to payment terms.

    Showing 20 of 30 values defined for element 7293 in D10B.

  • 1229 – Code specifying the action to be taken or already taken.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – The information is to be or has been added.
    • 2 – The information is to be or has been deleted.
    • 3 – The information is to be or has been changed.
    • 4 – This line item is not affected by the actual message.
    • 5 – This line item is entirely accepted by the seller.
    • 6 – This line item is accepted but amended by the seller.
    • 7 – This line item is not accepted by the seller.
    • 8 – Code specifying that the message is a schedule only.
    • 9 – Code specifying that amendments are requested/notified.
    • 10 – This line item is not found in the referenced message.
    • 11 – This line is not amended by the buyer.
    • 12 – Code specifying that the line item numbers have changed.
    • 13 – Buyer has deducted amount from payment.
    • 14 – Buyer has a claim against an outstanding invoice.
    • 15 – Factor has been requested to charge back the outstanding item.
    • 16 – Seller agrees to issue a credit note.
    • 17 – New settlement terms have been agreed.
    • 18 – Factor agrees to abide by the outcome of negotiations between seller and buyer.
    • 19 – Seller does not accept validity of dispute.
    • 20 – The reported situation is settled.

    Showing 20 of 115 values defined for element 1229 in D10B.

NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1)

Elements and codes as defined at NAD above.

UNT Unknown Segment (Max 1) Required

Sources and further reading