Try it now Login

UN/EDIFACT D10B DAPLOS Message

Review the DAPLOS segment sequence, mandatory fields, repeat counts and valid codes for the D10B EDIFACT directory.

Jump to Segment
UNH
BGM
DTM
IMD
NAD
RFF
LIN
DTM
PIA
QTY
CCI
CAV
RFF
MEA
GPO
IMD
QTY
NAD
RFF
DTM
HYN
PIA
CCI
CAV
IMD
DTM
QTY
NAD
DOC
NAD
DTM
EVE
DTM
IMD
NAD
FTX
CCI
CAV
MEA
GPO
IFD
PIA
QTY
NAD
COD
MEA
CCI
CAV
RFF
QTY
MEA
DOC
NAD
DTM
HYN
NAD
FTX
RFF
DTM
UNT
UNH Unknown Segment (Max 1) Required
BGM To indicate the type and function of a message and to transmit the identifying number. (Max 1) Required
  • C002 – Identification of a type of document/message by code or name. Code preferred.
    • 1001 – Code specifying the document name.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Certificate providing the values of an analysis.
      • 2 – Certificate certifying the conformity to predefined definitions.
      • 3 – Certificate certifying the quality of goods, services etc.
      • 4 – Report providing the results of a test session.
      • 5 – Report specifying the performance values of products.
      • 6 – Report providing specification values of products.
      • 7 – Reports on events during production process.
      • 8 – Document/message describes the test report of the first sample.
      • 9 – A document/message to enable the transmission of information regarding pricing and catalogue details for goods and services offered by a seller to a buyer.
      • 10 – Document/message providing basic data concerning a party.
      • 11 – A pre-approved document relating to federal label approval requirements.
      • 12 – Certificate certifying a specific quality of agricultural products.
      • 13 – Document/message which evidences the transport of goods by post (e.g. mail, parcel, etc.).
      • 14 – Certificate certifying the weight of goods.
      • 15 – Document/message specifying the weight of goods.
      • 16 – Document by means of which the documentary credit applicant specifies the conditions for the certificate and by whom the certificate is to be issued.
      • 17 – Document identifying goods in which the issuing authority expressly certifies that the goods originate in a specific country or part of, or group of countries. It also states the price and/or cost of the goods with the purpose of determining the customs origin.
      • 18 – Specific form of transit declaration issued by the exporter (movement certificate).
      • 19 – Certificate certifying the quantity of goods, services etc.
      • 20 – Usage of QALITY-message.

      Showing 20 of 675 values defined for element 1001 in D10B.

    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

    • 1000 – Name of a document.
      Type: an, Max Length: 35
  • C106 – Identification of a document/message by its number and eventually its version or revision.
    • 1004 – To identify a document.
      Type: an, Max Length: 70
    • 1056 – To identify a version.
      Type: an, Max Length: 9
    • 1060 – To identify a revision.
      Type: an, Max Length: 6
  • 1225 – Code indicating the function of the message.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – Message cancelling a previous transmission for a given transaction.
    • 2 – Message containing items to be added.
    • 3 – Message containing items to be deleted.
    • 4 – Message containing items to be changed.
    • 5 – Message replacing a previous message.
    • 6 – Message confirming the details of a previous transmission where such confirmation is required or recommended under the terms of a trading partner agreement.
    • 7 – The message is a duplicate of a previously generated message.
    • 8 – Code indicating that the referenced message is a status.
    • 9 – Initial transmission related to a given transaction.
    • 10 – Message whose reference number is not filed.
    • 11 – Message responding to a previous message or document.
    • 12 – Message indicating that the referenced message was received but not yet processed.
    • 13 – Code indicating that the referenced message is a request.
    • 14 – Code indicating that the information contained in the message is an advance notification of information to follow.
    • 15 – Repeated message transmission for reminding purposes.
    • 16 – Message content is a proposal.
    • 17 – Referenced transaction cancelled, reissued message will follow.
    • 18 – New issue of a previous message (maybe cancelled).
    • 19 – Change information submitted by buyer but initiated by seller.
    • 20 – Message to replace the heading of a previous message.

    Showing 20 of 65 values defined for element 1225 in D10B.

  • 4343 – Code specifying the type of acknowledgment required or transmitted.
    Type: an, Max Length: 3
    Valid Codes:
    • AA – Receiver of the payment message needs to return a debit advice in response to the payment message.
    • AB – Indicates that an acknowledgement relating to receipt of message is required.
    • AC – Acknowledge complete including changes.
    • AD – Acknowledge complete without changes.
    • AE – A debit advice is requested for each transaction in the message.
    • AF – The sender wishes to receive both a Debit Advice and an acknowledgement of receipt for a payment message.
    • AG – Authentication, by a party, of a document established for him by another party.
    • AH – A debit advice and message acknowledgement are requested for each transaction in the message.
    • AI – Acknowledgement of changes only is required.
    • AJ – Indication that the referenced offer or transaction (e.g. cargo booking or quotation request) is being dealt with.
    • AP – Indication that the referenced offer or transaction (e.g., cargo booking or quotation request) has been accepted.
    • AQ – The sender of the message expects a response.
    • AR – Documentary credit collection forwarded directly.
    • AS – The receiver of the message is to acknowledge receipt of the message and sent a credit advice for each credit.
    • CA – Indication that the referenced offer or transaction (e.g., cargo booking or quotation request) has been accepted under conditions indicated in this message.
    • CO – Indication that the message contains the physical measurements on which the charges will be based.
    • NA – Specifies that no acknowledgement is needed in response to this message.
    • RE – Indication that the referenced offer or transaction (e.g., cargo booking or quotation request) is not accepted.
    • UR – The message recipient is to send a credit advice in response to the message.
    • US – An acknowledgement is requested when an error occurred.

    Showing 20 of 23 values defined for element 4343 in D10B.

DTM To specify date, and/or time, or period. (Max 9) Required
  • C507 – Date and/or time, or period relevant to the specified date/time/period type.
    • 2005 – Code qualifying the function of a date, time or period.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • 1 – Actual date/time on which the service was completed.
      • 2 – Date on which buyer requests goods to be delivered.
      • 3 – [2377] Date of issue of an invoice.
      • 4 – [2011] Date of order.
      • 5 – A period of time when saleable stocks are expected to cover demand for a product.
      • 6 – The date an entity moved from a location.
      • 7 – (2069) Date and/or time at which specified event or document becomes effective.
      • 8 – Date/time when the purchase order is received by the seller.
      • 9 – Date/time of processing.
      • 10 – Date on which goods should be shipped or despatched by the supplier.
      • 11 – (2170) Date/time on which the goods are or are expected to be despatched or shipped.
      • 12 – Date by which payment should be made if discount terms are to apply.
      • 13 – Date by which payment must be made.
      • 14 – Date/time when instalments are due.
      • 15 – Date/time when promotion activities begin.
      • 16 – Date/time when promotion activities end.
      • 17 – Date and/or time when the shipper of the goods expects delivery will take place.
      • 18 – The date/time/period of the act, or an instance of installing something or someone.
      • 19 – Period of time between slaughter and delivery during which meat is ageing.
      • 20 – Date/time when cheque is issued.

      Showing 20 of 779 values defined for element 2005 in D10B.

    • 2380 – The value of a date, a date and time, a time or of a period in a specified representation.
      Type: an, Max Length: 35
    • 2379 – Code specifying the representation of a date, time or period.
      Type: an, Max Length: 3
      Valid Codes:
      • 2 – Calendar date: D = Day; M = Month; Y = Year.
      • 3 – Calendar date: M = Month; D = Day; Y = Year.
      • 4 – Calendar date C=Century; Y=Year; M=Month; D=Day.
      • 5 – Calendar date and time: C=Century; Y=Year; M=Month; D=Day; H=Hour; M=Minute.
      • 6 – Half-month: CC=century YY=year MM=month, B=1:first half month, B=2:second half month.
      • 7 – Week within a calendar month: CC=century YY=year MM=month. W=1-5 first week to fifth week in a month.
      • 8 – Shift within a calendar day: CC=century YY=year MM=month DD=day S=1-9 shift in a day.
      • 9 – Time period within a calendar day: CC=century YY=year MM=month DD=day PP=00-99 time period.
      • 10 – Calendar date including time with minutes: C=Century; Y=Year; M=Month; D=Day; T=Time designator; H=Hour; M=Minutes. The character [T] shall be used as time designator to indicate the start of the representation of the time. For example: 20010912T1433.
      • 101 – Calendar date: Y = Year; M = Month; D = Day.
      • 102 – Calendar date: C = Century ; Y = Year ; M = Month ; D = Day.
      • 103 – Calendar week day: Y = Year ; W = Week ; D = Day Week number 01 is always first week of January Day number 1 is always Monday.
      • 104 – A period of time specified by giving the start week of a month followed by the end week of a month. Data is to be transmitted as consecutive characters without hyphen.
      • 105 – Calendar day: Y = Year ; D = Day January the first = Day 001 Always start numbering the days of the year from January 1st through December 31st.
      • 106 – Day of a month: M = Month; D = Day.
      • 107 – Day's number within a specific year: D = Day.
      • 108 – Week's number within a specific year: W = Week.
      • 109 – Month's number within a specific year: M = Month.
      • 110 – Day's number within is a specific month: D = Day.
      • 201 – Calendar date including time without seconds: Y = Year; M = Month; D = Day; H = Hour; M = Minute.

      Showing 20 of 81 values defined for element 2379 in D10B.

IMD To describe an item in either an industry or free format. (Max 1)
  • C272 – To provide the characteristic of the item being described.
    • 7081 – Code specifying the characteristic of an item.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Product in conformity with specifications.
      • 2 – Description of general product form.
      • 3 – Product without quality control when received.
      • 4 – Description of the finish required/available on the product.
      • 5 – Description of what the end use application of the product will be.
      • 6 – Description of the method of construction.
      • 7 – A drug name specially given in order that it may be freely used without legal restriction.
      • 8 – The characteristic of a product.
      • 9 – Description of a sub-product.
      • 10 – Specifies the direction of the grain of the product.
      • 11 – Item characteristic is described following Customs specifications.
      • 12 – Description of the type and/or process involved in making the product. E.g. in steel, description of the steelmaking process.
      • 13 – The degree of excellence of a thing.
      • 14 – Description of the surface condition (e.g. roughness) of the product.
      • 15 – Description of any heat treatment or annealing required/performed on the product.
      • 16 – A code identifying a size system, comprising a set of sizes.
      • 17 – Description of any special coating required/available on the product.
      • 18 – Description of any chemical surface treatment required/performed on the product.
      • 19 – Description of any mechanical surface treatment required/performed on the product.
      • 20 – Type of transfer capacity.

      Showing 20 of 227 values defined for element 7081 in D10B.

    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

  • C273 – Description of an item.
    • 7009 – Code specifying an item.
      Type: an, Max Length: 17
      Valid Codes:
      • 1 – Displayed text is bold.
      • 2 – Displayed text is dimmed.
      • 3 – Displayed text is italicised.
      • 4 – Displayed text is normal.
      • 5 – Displayed text foreground and background colours are reversed.
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

    • 7008 – Free form description of an item.
      Type: an, Max Length: 256
    • 7008 – Free form description of an item.
      Type: an, Max Length: 256
    • 3453 – Code specifying the language name.
      Type: an, Max Length: 3
  • 7077 – Code specifying the format of a description.
    Type: an, Max Length: 3
    Valid Codes:
    • A – Long description of an item in free form.
    • B – Description of an item in coded and free form text.
    • C – Description of an item in coded format.
    • D – Price look-up description of a product for point of sale receipts.
    • E – Short description of an item in free form.
    • F – Description of an item in free form text.
    • S – Description of an item in a structured format.
    • X – Description of an item in a coded and free text format.
  • 7383 – Code specifying the surface or layer of an object.
    Type: an, Max Length: 3
    Valid Codes:
    • 1S – The location is side one.
    • 2S – The location is side two.
    • AA – To indicate that the entity being specified is on the surface.
    • AB – To indicate that the entity being specified is off the surface.
    • AC – Specifies that the surface/layer/position being described is the soluble portion.
    • AD – The surface or layer of the product being described is the opposite corners.
    • AE – The surface or layer of the product being described are the corner diagonals.
    • AF – The left-hand side (looking forward) of a ship, boat or aircraft.
    • AG – The right-hand side (looking forward) of a ship, boat or aircraft.
    • AH – Surface of a tooth directed toward the face and opposite the lingual surface.
    • AI – Surface of the tooth relating to the cutting edge of the anterior teeth, incisors or canines.
    • AJ – Surface of the tooth toward the back of the dental arch, or away from the midline.
    • AK – Surface of the tooth pertaining to or around the cheek.
    • AL – Surface of the tooth pertaining to the masticating surfaces of the posterior teeth.
    • AM – Surface of the tooth pertaining to or around the tongue.
    • AN – Surface of the tooth toward the midline of the dental arch.
    • BC – The location is at the back of the cab.
    • BS – The location is both sides.
    • BT – The location is on the bottom.
    • DF – The location is in the dual fuel tank positions.

    Showing 20 of 33 values defined for element 7383 in D10B.

Group SG1 (Max 9)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
  • C082 – Identification of a transaction party by code.
    • 3039 – Code specifying the identity of a party.
      Type: an, Max Length: 35 (Required)
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

  • C058 – Unstructured name and address: one to five lines.
    • 3124 – Free form description of a name and address line.
      Type: an, Max Length: 35 (Required)
    • 3124 – Free form description of a name and address line.
      Type: an, Max Length: 35
    • 3124 – Free form description of a name and address line.
      Type: an, Max Length: 35
    • 3124 – Free form description of a name and address line.
      Type: an, Max Length: 35
    • 3124 – Free form description of a name and address line.
      Type: an, Max Length: 35
  • C080 – Identification of a transaction party by name, one to five lines. Party name may be formatted.
    • 3036 – Name of a party.
      Type: an, Max Length: 70 (Required)
    • 3036 – Name of a party.
      Type: an, Max Length: 70
    • 3036 – Name of a party.
      Type: an, Max Length: 70
    • 3036 – Name of a party.
      Type: an, Max Length: 70
    • 3036 – Name of a party.
      Type: an, Max Length: 70
    • 3045 – Code specifying the representation of a party name.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Name component 1: Family name. Name component 2: Given name or initials. Name component 3: Given name or initials. Name component 4: Maiden name. Name component 5: Title Group of name components transmitted in sequence with name component 1 transmitted first. The maiden name is the family name given at birth of a female. Other names are self-explanatory.
      • 2 – Name component 1: paternal name; name component 2: maternal name; name component 3: given name or initial(s); name component 4: middle name or initial(s); name component 5: name suffix.
      • 3 – Name component 1: Qualification Name component 2: First part of the name Name component 3: Second part of the name.
  • C059 – Street address and/or PO Box number in a structured address: one to four lines.
    • 3042 – To identify a street and number and/or Post Office box number.
      Type: an, Max Length: 35 (Required)
    • 3042 – To identify a street and number and/or Post Office box number.
      Type: an, Max Length: 35
    • 3042 – To identify a street and number and/or Post Office box number.
      Type: an, Max Length: 35
    • 3042 – To identify a street and number and/or Post Office box number.
      Type: an, Max Length: 35
  • C819 – To specify a country subdivision, such as state, canton, county, prefecture.
    • 3229 – To identify a country subdivision, such as state, canton, county, prefecture.
      Type: an, Max Length: 9
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

    • 3228 – Name of a country subdivision, such as state, canton, county, prefecture.
      Type: an, Max Length: 70
  • 3035 – Code giving specific meaning to a party.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • AA – Party to be billed in accordance with AAR Accounting rule 11.
    • AB – Third party who arranged the purchase of merchandise on behalf of the actual buyer.
    • AE – Any natural or legal person who makes a declaration to an official body on behalf of another natural or legal person, where legally permitted (CCC).
    • AF – Natural or legal person responsible for the satisfactory performance of a Customs transit operation. Source: CCC.
    • AG – (3196) Party authorized to act on behalf of another party. Synonym: Representative.
    • AH – Agent acting on behalf of the transit principal (CCC).
    • AI – Person who has been chosen for a job.
    • AJ – The party which has issued all mutually agreed codes used in the message.
    • AK – Party to whom acknowledgement should be sent.
    • AL – (3340) Party accepting liability for goods held or moving (e.g. transit) under a Customs authorization and - when applicable - a guarantee.
    • AM – Employee of a company or firm authorized to act on behalf of that company or firm e.g. to make a Customs declaration.
    • AN – Person or company which is authorised by the relevant Customs authority to import goods without payment all taxes or specific taxes at the point of entry into the country.
    • AO – Party account is assigned to.
    • AP – (3336) Party accepting goods, products, services, etc.
    • AQ – Person or company approved by the relevant authority in the country to pack and export specific goods under Customs supervision.
    • AR – Exporter authorized/approved by Customs for special Customs procedures e.g. simplified procedure.
    • AS – Identifies the financial institution servicing the account(s).
    • AT – Importer authorized/approved by Customs for special Customs procedures e.g. simplified procedure.
    • AU – Trader authorized/approved by Customs for special transit procedures e.g. simplified procedure.
    • AV – Party that has delegated the authority to take a certain action on behalf of a company or agency.

    Showing 20 of 589 values defined for element 3035 in D10B.

  • 3164 – Name of a city.
    Type: an, Max Length: 35
  • 3251 – Code specifying the postal zone or address.
    Type: an, Max Length: 17
  • 3207 – Identification of the name of the country or other geographical entity as defined in ISO 3166-1 and UN/ECE Recommendation 3.
    Type: an, Max Length: 3
RFF To specify a reference. (Max 9)
  • C506 – Identification of a reference.
    • 1153 – Code qualifying a reference.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • AAA – (1018) Reference number identifying the acknowledgement of an order.
      • AAB – [1088] Reference number to identify a proforma invoice.
      • AAC – [1172] Reference number to identify a documentary credit.
      • AAD – [1318] Reference number to identify an addendum to a contract.
      • AAE – Reference number assigned to a goods declaration.
      • AAF – A reference number identifying a debit card.
      • AAG – (1332) Reference number assigned by issuing party to an offer.
      • AAH – Reference number allocated by the bank to a batch of different underlying interbank transactions.
      • AAI – Reference number allocated by the bank to one specific interbank transaction.
      • AAJ – Reference number assigned by issuer to a delivery order.
      • AAK – Reference number assigned by issuing party to a despatch advice.
      • AAL – Reference number identifying a specific product drawing.
      • AAM – Reference number assigned to a waybill, see: 1001 = 700.
      • AAN – Reference number assigned by buyer to a delivery schedule.
      • AAO – [1362] Reference number assigned by the consignee to identify a particular consignment.
      • AAP – [1310] Identifier of a shipment which is part of an order.
      • AAQ – [8260] To identify a piece if transport equipment e.g. container or unit load device.
      • AAR – A reference number assigned by a municipality to identify a business.
      • AAS – [1188] Reference number to identify a document evidencing a transport contract.
      • AAT – Identifies the master label number of any package type.

      Showing 20 of 778 values defined for element 1153 in D10B.

    • 1154 – Identifies a reference.
      Type: an, Max Length: 70
    • 1156 – To identify a line of a document.
      Type: an, Max Length: 6
    • 1056 – To identify a version.
      Type: an, Max Length: 9
    • 1060 – To identify a revision.
      Type: an, Max Length: 6
Group SG2 (Max 9999)
LIN To identify a line item and configuration. (Max 1) Required
  • C212 – Goods identification for a specified source.
    • 7140 – To identify an item.
      Type: an, Max Length: 35
    • 7143 – Coded identification of an item type.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – Number assigned by manufacturer or seller to identify the release of a product.
      • AB – The item number is that of an assembly.
      • AC – Article identifier used within health sector to indicate data used conforms to HIBC.
      • AD – Number assigned to a cold roll.
      • AE – Number assigned to a hot roll.
      • AF – Number assigned to a slab, which is produced in a particular production step.
      • AG – A number assigned to indicate a revision of software.
      • AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
      • AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
      • AJ – Number assigned to a sample.
      • AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
      • AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
      • AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
      • AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
      • AO – A code which specifies the codification of the state's labelling requirements.
      • AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
      • AQ – A number identifying a coupon.
      • AR – A number to identify a resource.
      • AS – A number to identify a work task.
      • AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.

      Showing 20 of 164 values defined for element 7143 in D10B.

    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

  • C829 – To provide an indication that a segment or segment group is used to contain sub-line or sub-line item information and to optionally enable the sub-line to be identified.
    • 1082 – To identify a line item.
      Type: an, Max Length: 6
  • 1082 – To identify a line item.
    Type: an, Max Length: 6
  • 1229 – Code specifying the action to be taken or already taken.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – The information is to be or has been added.
    • 2 – The information is to be or has been deleted.
    • 3 – The information is to be or has been changed.
    • 4 – This line item is not affected by the actual message.
    • 5 – This line item is entirely accepted by the seller.
    • 6 – This line item is accepted but amended by the seller.
    • 7 – This line item is not accepted by the seller.
    • 8 – Code specifying that the message is a schedule only.
    • 9 – Code specifying that amendments are requested/notified.
    • 10 – This line item is not found in the referenced message.
    • 11 – This line is not amended by the buyer.
    • 12 – Code specifying that the line item numbers have changed.
    • 13 – Buyer has deducted amount from payment.
    • 14 – Buyer has a claim against an outstanding invoice.
    • 15 – Factor has been requested to charge back the outstanding item.
    • 16 – Seller agrees to issue a credit note.
    • 17 – New settlement terms have been agreed.
    • 18 – Factor agrees to abide by the outcome of negotiations between seller and buyer.
    • 19 – Seller does not accept validity of dispute.
    • 20 – The reported situation is settled.

    Showing 20 of 115 values defined for element 1229 in D10B.

  • 1222 – To specify a level within a configuration.
    Type: n, Max Length: 2
  • 7083 – Code specifying the configuration operation.
    Type: an, Max Length: 3
    Valid Codes:
    • A – The operation is to add to the configuration.
    • D – The operation is to delete from the configuration.
    • I – The item is a part of the configuration.
DTM To specify date, and/or time, or period. (Max 9) Required

Elements and codes as defined at DTM above.

PIA To specify additional or substitutional item identification codes. (Max 9) Required
  • C212 – Goods identification for a specified source.
    • 7140 – To identify an item.
      Type: an, Max Length: 35
    • 7143 – Coded identification of an item type.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – Number assigned by manufacturer or seller to identify the release of a product.
      • AB – The item number is that of an assembly.
      • AC – Article identifier used within health sector to indicate data used conforms to HIBC.
      • AD – Number assigned to a cold roll.
      • AE – Number assigned to a hot roll.
      • AF – Number assigned to a slab, which is produced in a particular production step.
      • AG – A number assigned to indicate a revision of software.
      • AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
      • AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
      • AJ – Number assigned to a sample.
      • AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
      • AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
      • AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
      • AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
      • AO – A code which specifies the codification of the state's labelling requirements.
      • AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
      • AQ – A number identifying a coupon.
      • AR – A number to identify a resource.
      • AS – A number to identify a work task.
      • AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.

      Showing 20 of 164 values defined for element 7143 in D10B.

    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

  • C212 – Goods identification for a specified source.
    • 7140 – To identify an item.
      Type: an, Max Length: 35
    • 7143 – Coded identification of an item type.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – Number assigned by manufacturer or seller to identify the release of a product.
      • AB – The item number is that of an assembly.
      • AC – Article identifier used within health sector to indicate data used conforms to HIBC.
      • AD – Number assigned to a cold roll.
      • AE – Number assigned to a hot roll.
      • AF – Number assigned to a slab, which is produced in a particular production step.
      • AG – A number assigned to indicate a revision of software.
      • AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
      • AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
      • AJ – Number assigned to a sample.
      • AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
      • AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
      • AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
      • AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
      • AO – A code which specifies the codification of the state's labelling requirements.
      • AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
      • AQ – A number identifying a coupon.
      • AR – A number to identify a resource.
      • AS – A number to identify a work task.
      • AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.

      Showing 20 of 164 values defined for element 7143 in D10B.

    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

  • C212 – Goods identification for a specified source.
    • 7140 – To identify an item.
      Type: an, Max Length: 35
    • 7143 – Coded identification of an item type.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – Number assigned by manufacturer or seller to identify the release of a product.
      • AB – The item number is that of an assembly.
      • AC – Article identifier used within health sector to indicate data used conforms to HIBC.
      • AD – Number assigned to a cold roll.
      • AE – Number assigned to a hot roll.
      • AF – Number assigned to a slab, which is produced in a particular production step.
      • AG – A number assigned to indicate a revision of software.
      • AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
      • AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
      • AJ – Number assigned to a sample.
      • AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
      • AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
      • AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
      • AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
      • AO – A code which specifies the codification of the state's labelling requirements.
      • AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
      • AQ – A number identifying a coupon.
      • AR – A number to identify a resource.
      • AS – A number to identify a work task.
      • AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.

      Showing 20 of 164 values defined for element 7143 in D10B.

    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

  • C212 – Goods identification for a specified source.
    • 7140 – To identify an item.
      Type: an, Max Length: 35
    • 7143 – Coded identification of an item type.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – Number assigned by manufacturer or seller to identify the release of a product.
      • AB – The item number is that of an assembly.
      • AC – Article identifier used within health sector to indicate data used conforms to HIBC.
      • AD – Number assigned to a cold roll.
      • AE – Number assigned to a hot roll.
      • AF – Number assigned to a slab, which is produced in a particular production step.
      • AG – A number assigned to indicate a revision of software.
      • AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
      • AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
      • AJ – Number assigned to a sample.
      • AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
      • AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
      • AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
      • AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
      • AO – A code which specifies the codification of the state's labelling requirements.
      • AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
      • AQ – A number identifying a coupon.
      • AR – A number to identify a resource.
      • AS – A number to identify a work task.
      • AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.

      Showing 20 of 164 values defined for element 7143 in D10B.

    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

  • C212 – Goods identification for a specified source.
    • 7140 – To identify an item.
      Type: an, Max Length: 35
    • 7143 – Coded identification of an item type.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – Number assigned by manufacturer or seller to identify the release of a product.
      • AB – The item number is that of an assembly.
      • AC – Article identifier used within health sector to indicate data used conforms to HIBC.
      • AD – Number assigned to a cold roll.
      • AE – Number assigned to a hot roll.
      • AF – Number assigned to a slab, which is produced in a particular production step.
      • AG – A number assigned to indicate a revision of software.
      • AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
      • AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
      • AJ – Number assigned to a sample.
      • AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
      • AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
      • AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
      • AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
      • AO – A code which specifies the codification of the state's labelling requirements.
      • AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
      • AQ – A number identifying a coupon.
      • AR – A number to identify a resource.
      • AS – A number to identify a work task.
      • AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.

      Showing 20 of 164 values defined for element 7143 in D10B.

    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

  • 4347 – Code qualifying the product identifier.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • 1 – Information which specifies and qualifies product identifications.
    • 2 – The item number describes the potential substitute product.
    • 3 – The given item number is the number of the product that substitutes another one.
    • 4 – The given item number is the number of the original product substituted by another.
    • 5 – The item number is for product identification.
    • 6 – Product id of the product that will follow the one currently in production/trade.
    • 7 – Product id of the predecessor of the product currently in production/trade.
    • 8 – The given item number is the expired item number of the product. It has been replaced.
    • 9 – Code indicating the deletion of a secondary identification.
    • 10 – Identification of a defective part.
    • 11 – Identification of a repaired part.
    • 12 – Alternate number to identify the product.
    • 13 – Used to indicate which trade item the promotional trade item replaces or coexists alongside. To enable the identification of the two trade items to be linked providing access to their information.
QTY To specify a pertinent quantity. (Max 1)
  • C186 – Quantity information in a transaction, qualified when relevant.
    • 6063 – Code qualifying the type of quantity.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • 1 – Individually separated and distinct quantity.
      • 2 – Quantity relevant for charge.
      • 3 – Quantity accumulated.
      • 4 – Interest for overdrawing the account.
      • 5 – The dosage of active ingredient per unit.
      • 6 – The number of entities that audit accounts.
      • 7 – The number of branch locations being leased by an entity.
      • 8 – Quantity of goods which the customer requires the supplier to have in inventory and which may be inspected by the customer if desired.
      • 9 – The number of branch locations owned by an entity.
      • 10 – The number of judgements registered against an entity.
      • 11 – Part of the whole quantity.
      • 12 – Quantity despatched by the seller.
      • 13 – The number of liens registered against an entity.
      • 14 – The number of animals kept for use or profit.
      • 15 – The number of cheques returned due to insufficient funds.
      • 16 – The number of stolen cheques.
      • 17 – The total quantity of a product on hand at a location. This includes as well units awaiting return to manufacturer, units unavailable due to inspection procedures and undamaged stock available for despatch, resale or use.
      • 18 – Quantity previously referenced.
      • 19 – The number of security shares issued and for which full payment has been made.
      • 20 – Quantity not usable.

      Showing 20 of 490 values defined for element 6063 in D10B.

    • 6060 – Alphanumeric representation of a quantity.
      Type: an, Max Length: 35 (Required)
    • 6411 – Code specifying the unit of measurement.
      Type: an, Max Length: 8
Group SG3 (Max 9)
CCI To identify and describe a specific characteristic and its relevance for subsequent business processes. (Max 1) Required
  • C502 – Identification of measurement type.
    • 6313 – Code specifying the attribute measured.
      Type: an, Max Length: 3
      Valid Codes:
      • A – The measured consolidated weight.
      • AAA – [6160] Weight of goods including any packaging that normally going with the goods.
      • AAB – [6292] Weight (mass) of goods including packing but excluding the carrier's equipment.
      • AAC – Total weight of goods excluding packaging.
      • AAD – [6012] Total gross weight (mass) of all goods items referred to as one consignment including packaging but excluding any transport equipment.
      • AAF – [6048] Weight (mass) if goods without any packaging.
      • AAG – Force exerted by a thruster installed at the stern of a vessel.
      • AAH – Force exerted by a thruster installed at the bow of a vessel.
      • AAI – The hydrate content of an alcoholic product at the moment of bottling.
      • AAJ – The number of units contained on a pallet.
      • AAK – An indication of the fat content of a product.
      • AAM – [6300] The measure of the overall size of a ship determined in accordance with the provisions of the International Convention on Tonnage Measurement of Ships, 1969.
      • AAN – [6302] The measure of the useful capacity of a ship determined in accordance with the provisions of the International Convention on Tonnage Measurement of Ships, 1969.
      • AAO – Degree of moisture.
      • AAP – Electromotive force, or difference of electronic potential between two points.
      • AAQ – Value of energy consumption.
      • AAR – Measurement of the rate of dispersal of heat.
      • AAS – Measurement of the flow of air.
      • AAT – Measurement of the impact of a shock.
      • AAU – Temperature identified system or process works according to specifications.

      Showing 20 of 257 values defined for element 6313 in D10B.

    • 6321 – Code specifying the significance of a measurement.
      Type: an, Max Length: 3
      Valid Codes:
      • 3 – The measurement is approximately equal to that specified.
      • 4 – The measurement is equal to that specified.
      • 5 – The measurement is greater than or equal to that specified.
      • 6 – The measurement is greater than that specified.
      • 7 – The measurement is less than that specified.
      • 8 – The measurement is less than or equal to that specified.
      • 9 – Average value for a specific series of readings.
      • 10 – The measurement is not equal to that specified.
      • 12 – The measurement reported is a true value.
      • 13 – The measurement reported is an observed value.
      • 14 – The measurement marked on the object.
      • 15 – The measurement reported is out of range.
  • C240 – To provide a description of a characteristic.
    • 7037 – A code specifying a characteristic.
      Type: an, Max Length: 17 (Required)
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

    • 7036 – Free form description of a characteristic.
      Type: an, Max Length: 35
    • 7036 – Free form description of a characteristic.
      Type: an, Max Length: 35
  • 7059 – Code specifying the type of class.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – The class of chemical properties.
    • 2 – Mechanical properties.
    • 3 – Component being quantitatively measured (such as height).
    • 4 – System being investigated to obtain a measurable quantity (such as blood serum).
    • 5 – Characteristic of ecological labelling.
    • 6 – Characteristic of a party.
    • 7 – The property is magnetic.
    • 8 – A class of characteristics describing a meter.
    • 9 – A class of characteristics describing a meter reading.
    • 10 – No specific class.
    • 11 – A class of characteristics describing a product.
    • 12 – The class describes a medical investigation.
    • 13 – The class describes the species of an animal.
    • 14 – The class describes the breed of an animal species.
    • 15 – Property of a structure.
    • 16 – Property of a parameter.
    • 17 – A class of characteristics describing an equipment.
    • 18 – A class of characteristics describing a process.
  • 4051 – Code specifying the relevance of a characteristic.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – This product characteristic provides additional information for customer.
    • 2 – This product characteristic has to be provided within orders.
    • 3 – This product characteristic has to be provided within the subsequent business transactions.
CAV To provide the value of a characteristic. (Max 1)
  • C889 – To provide the value of a characteristic.
    • 7111 – Code specifying the value of a characteristic.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – The measurement around the widest part of the chest/bust.
      • 2 – The measurement around the fullest part of the hips.
      • 3 – The measurement of the outside leg seam. This is the distance from the waist to the bottom of the trousers.
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

    • 7110 – Free form description of the value of a characteristic.
      Type: an, Max Length: 35
    • 7110 – Free form description of the value of a characteristic.
      Type: an, Max Length: 35
Group SG4 (Max 99)
RFF To specify a reference. (Max 1) Required

Elements and codes as defined at RFF above.

Group SG5 (Max 9)
MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 1) Required
  • C502 – Identification of measurement type.
    • 6313 – Code specifying the attribute measured.
      Type: an, Max Length: 3
      Valid Codes:
      • A – The measured consolidated weight.
      • AAA – [6160] Weight of goods including any packaging that normally going with the goods.
      • AAB – [6292] Weight (mass) of goods including packing but excluding the carrier's equipment.
      • AAC – Total weight of goods excluding packaging.
      • AAD – [6012] Total gross weight (mass) of all goods items referred to as one consignment including packaging but excluding any transport equipment.
      • AAF – [6048] Weight (mass) if goods without any packaging.
      • AAG – Force exerted by a thruster installed at the stern of a vessel.
      • AAH – Force exerted by a thruster installed at the bow of a vessel.
      • AAI – The hydrate content of an alcoholic product at the moment of bottling.
      • AAJ – The number of units contained on a pallet.
      • AAK – An indication of the fat content of a product.
      • AAM – [6300] The measure of the overall size of a ship determined in accordance with the provisions of the International Convention on Tonnage Measurement of Ships, 1969.
      • AAN – [6302] The measure of the useful capacity of a ship determined in accordance with the provisions of the International Convention on Tonnage Measurement of Ships, 1969.
      • AAO – Degree of moisture.
      • AAP – Electromotive force, or difference of electronic potential between two points.
      • AAQ – Value of energy consumption.
      • AAR – Measurement of the rate of dispersal of heat.
      • AAS – Measurement of the flow of air.
      • AAT – Measurement of the impact of a shock.
      • AAU – Temperature identified system or process works according to specifications.

      Showing 20 of 257 values defined for element 6313 in D10B.

    • 6321 – Code specifying the significance of a measurement.
      Type: an, Max Length: 3
      Valid Codes:
      • 3 – The measurement is approximately equal to that specified.
      • 4 – The measurement is equal to that specified.
      • 5 – The measurement is greater than or equal to that specified.
      • 6 – The measurement is greater than that specified.
      • 7 – The measurement is less than that specified.
      • 8 – The measurement is less than or equal to that specified.
      • 9 – Average value for a specific series of readings.
      • 10 – The measurement is not equal to that specified.
      • 12 – The measurement reported is a true value.
      • 13 – The measurement reported is an observed value.
      • 14 – The measurement marked on the object.
      • 15 – The measurement reported is out of range.
  • C174 – Measurement value and relevant minimum and maximum values of the measurement range.
    • 6411 – Code specifying the unit of measurement.
      Type: an, Max Length: 8 (Required)
    • 6314 – To specify the value of a measurement.
      Type: an, Max Length: 18
    • 6162 – To specify the minimum value of a range.
      Type: n, Max Length: 18
    • 6152 – To specify the maximum value of a range.
      Type: n, Max Length: 18
    • 6432 – Count of the number of significant digits.
      Type: n, Max Length: 2
  • 6311 – Code qualifying the purpose of the measurement.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • AAA – Line item measurement specified by the Food and Drug Administration.
    • AAB – Specified measurements refer to transport conditions for delivery to a distribution centre.
    • AAC – Size of a retail container in terms of volume.
    • AAD – Measurement to be used by/for other United States government agencies.
    • AAE – [6314] To specify the value of a measurement.
    • AAF – The measurement of a consignment or part for customs purpose.
    • AAG – The measurement of the alcohol content.
    • AAH – The total weight of an identified dimension.
    • AAI – Weight at line item level.
    • AAJ – Measurement reportable for visaed merchandise.
    • AAK – Quantity to be written off from the total license amount.
    • AAL – Total tonnage of cargo loaded onto the conveyance.
    • AAM – Total tonnage of cargo unloaded from the conveyance.
    • AAN – Tonnage of conveyance.
    • AAO – Registered summer dead weight total tonnage of the vessel.
    • AAP – Total weight of containerized cargo on vessel.
    • AAQ – Total weight of non-containerized cargo on vessel.
    • AAR – Primary reportable quantity associated with a tariff number.
    • AAS – Secondary reportable quantity associated with a tariff number.
    • AAT – Third reportable quantity associated with a tariff number.

    Showing 20 of 102 values defined for element 6311 in D10B.

  • 7383 – Code specifying the surface or layer of an object.
    Type: an, Max Length: 3
    Valid Codes:
    • 1S – The location is side one.
    • 2S – The location is side two.
    • AA – To indicate that the entity being specified is on the surface.
    • AB – To indicate that the entity being specified is off the surface.
    • AC – Specifies that the surface/layer/position being described is the soluble portion.
    • AD – The surface or layer of the product being described is the opposite corners.
    • AE – The surface or layer of the product being described are the corner diagonals.
    • AF – The left-hand side (looking forward) of a ship, boat or aircraft.
    • AG – The right-hand side (looking forward) of a ship, boat or aircraft.
    • AH – Surface of a tooth directed toward the face and opposite the lingual surface.
    • AI – Surface of the tooth relating to the cutting edge of the anterior teeth, incisors or canines.
    • AJ – Surface of the tooth toward the back of the dental arch, or away from the midline.
    • AK – Surface of the tooth pertaining to or around the cheek.
    • AL – Surface of the tooth pertaining to the masticating surfaces of the posterior teeth.
    • AM – Surface of the tooth pertaining to or around the tongue.
    • AN – Surface of the tooth toward the midline of the dental arch.
    • BC – The location is at the back of the cab.
    • BS – The location is both sides.
    • BT – The location is on the bottom.
    • DF – The location is in the dual fuel tank positions.

    Showing 20 of 33 values defined for element 7383 in D10B.

GPO To specify a geographical position. (Max 9999)
  • 6029 – Code identifying the type of a geographical position.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • 1 – A geographical position identifying the start.
    • 2 – A geographical position identifying the end.
    • 3 – Point on the border of a surface area.
    • 4 – Location of ship-to-ship activity.
  • 6000 – To specify the angular distance, measured in degrees, minutes, and seconds, north or south from the equator.
    Type: an, Max Length: 10
  • 6002 – To specify the value of longitude i.e. the angular distance east or west on the earth's surface, measured by the angle and expressed in degrees, minutes, and seconds, which the meridian passing through a particular place makes with a standard or prime meridian.
    Type: an, Max Length: 11
  • 6096 – The height of an object above sea level.
    Type: n, Max Length: 18
Group SG6 (Max 99)
IMD To describe an item in either an industry or free format. (Max 1) Required

Elements and codes as defined at IMD above.

QTY To specify a pertinent quantity. (Max 1)

Elements and codes as defined at QTY above.

NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1)

Elements and codes as defined at NAD above.

Group SG7 (Max 9)
RFF To specify a reference. (Max 1) Required

Elements and codes as defined at RFF above.

DTM To specify date, and/or time, or period. (Max 1)

Elements and codes as defined at DTM above.

Group SG8 (Max 9)
HYN A segment to identify hierarchical connections from a given item to a higher or lower levelled item or to identify dependencies among the content of hierarchically related groups of data. (Max 1) Required
  • C212 – Goods identification for a specified source.
    • 7140 – To identify an item.
      Type: an, Max Length: 35
    • 7143 – Coded identification of an item type.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – Number assigned by manufacturer or seller to identify the release of a product.
      • AB – The item number is that of an assembly.
      • AC – Article identifier used within health sector to indicate data used conforms to HIBC.
      • AD – Number assigned to a cold roll.
      • AE – Number assigned to a hot roll.
      • AF – Number assigned to a slab, which is produced in a particular production step.
      • AG – A number assigned to indicate a revision of software.
      • AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
      • AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
      • AJ – Number assigned to a sample.
      • AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
      • AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
      • AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
      • AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
      • AO – A code which specifies the codification of the state's labelling requirements.
      • AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
      • AQ – A number identifying a coupon.
      • AR – A number to identify a resource.
      • AS – A number to identify a work task.
      • AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.

      Showing 20 of 164 values defined for element 7143 in D10B.

    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

  • 7173 – Code qualifying an object in a hierarchy.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • 1 – Hierarchy applying to figures (an illustration showing the components of an item).
    • 2 – Hierarchy applying to products.
    • 3 – No hierarchy to be described.
    • 4 – Objects are related in the hierarchy as data structures.
    • 5 – An item assembled from a number of component parts.
    • 6 – Part assembled with other items to produce an assembly.
    • 7 – A structured view on how an item is composed.
    • 8 – Hierarchy applies to financial institution details information.
    • 9 – Hierarchy applies to financial data information.
    • 10 – Hierarchy applies to party history information.
    • 11 – Hierarchy applies to entity identification information.
    • 12 – Hierarchy applies to business insurance information.
    • 13 – Hierarchy applies to credit appraisal information.
    • 14 – Hierarchy applies to location information.
    • 15 – Hierarchy applies to management details information.
    • 16 – Hierarchy applies to operations information.
    • 17 – Hierarchy applies to payment handling information.
    • 18 – Hierarchy applies to public records information.
    • 19 – Hierarchy applies to real estate property information.
    • 20 – Hierarchy applies to related entities information.

    Showing 20 of 33 values defined for element 7173 in D10B.

  • 7171 – Code specifying the relationship between the hierarchical object and an identified object.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – Identifies the immediate higher levelled hierarchy stage.
    • 2 – Identifies the immediate lower levelled hierarchy stage.
    • 3 – Message level.
    • 4 – Segment level.
    • 5 – Composite data element level.
    • 6 – Simple data element level.
    • 7 – Code level.
  • 1229 – Code specifying the action to be taken or already taken.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – The information is to be or has been added.
    • 2 – The information is to be or has been deleted.
    • 3 – The information is to be or has been changed.
    • 4 – This line item is not affected by the actual message.
    • 5 – This line item is entirely accepted by the seller.
    • 6 – This line item is accepted but amended by the seller.
    • 7 – This line item is not accepted by the seller.
    • 8 – Code specifying that the message is a schedule only.
    • 9 – Code specifying that amendments are requested/notified.
    • 10 – This line item is not found in the referenced message.
    • 11 – This line is not amended by the buyer.
    • 12 – Code specifying that the line item numbers have changed.
    • 13 – Buyer has deducted amount from payment.
    • 14 – Buyer has a claim against an outstanding invoice.
    • 15 – Factor has been requested to charge back the outstanding item.
    • 16 – Seller agrees to issue a credit note.
    • 17 – New settlement terms have been agreed.
    • 18 – Factor agrees to abide by the outcome of negotiations between seller and buyer.
    • 19 – Seller does not accept validity of dispute.
    • 20 – The reported situation is settled.

    Showing 20 of 115 values defined for element 1229 in D10B.

  • 7166 – To identify the next higher level in a hierarchical structure.
    Type: an, Max Length: 35
PIA To specify additional or substitutional item identification codes. (Max 9)

Elements and codes as defined at PIA above.

Group SG9 (Max 9)
CCI To identify and describe a specific characteristic and its relevance for subsequent business processes. (Max 1) Required

Elements and codes as defined at CCI above.

CAV To provide the value of a characteristic. (Max 1)

Elements and codes as defined at CAV above.

Group SG10 (Max 9)
IMD To describe an item in either an industry or free format. (Max 1) Required

Elements and codes as defined at IMD above.

DTM To specify date, and/or time, or period. (Max 1)

Elements and codes as defined at DTM above.

QTY To specify a pertinent quantity. (Max 1)

Elements and codes as defined at QTY above.

NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1)

Elements and codes as defined at NAD above.

Group SG11 (Max 99)
DOC To identify documents and details directly related to it. (Max 1) Required
  • C002 – Identification of a type of document/message by code or name. Code preferred.
    • 1001 – Code specifying the document name.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Certificate providing the values of an analysis.
      • 2 – Certificate certifying the conformity to predefined definitions.
      • 3 – Certificate certifying the quality of goods, services etc.
      • 4 – Report providing the results of a test session.
      • 5 – Report specifying the performance values of products.
      • 6 – Report providing specification values of products.
      • 7 – Reports on events during production process.
      • 8 – Document/message describes the test report of the first sample.
      • 9 – A document/message to enable the transmission of information regarding pricing and catalogue details for goods and services offered by a seller to a buyer.
      • 10 – Document/message providing basic data concerning a party.
      • 11 – A pre-approved document relating to federal label approval requirements.
      • 12 – Certificate certifying a specific quality of agricultural products.
      • 13 – Document/message which evidences the transport of goods by post (e.g. mail, parcel, etc.).
      • 14 – Certificate certifying the weight of goods.
      • 15 – Document/message specifying the weight of goods.
      • 16 – Document by means of which the documentary credit applicant specifies the conditions for the certificate and by whom the certificate is to be issued.
      • 17 – Document identifying goods in which the issuing authority expressly certifies that the goods originate in a specific country or part of, or group of countries. It also states the price and/or cost of the goods with the purpose of determining the customs origin.
      • 18 – Specific form of transit declaration issued by the exporter (movement certificate).
      • 19 – Certificate certifying the quantity of goods, services etc.
      • 20 – Usage of QALITY-message.

      Showing 20 of 675 values defined for element 1001 in D10B.

    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

    • 1000 – Name of a document.
      Type: an, Max Length: 35
  • C503 – Identification of document/message by number, status, source and/or language.
    • 1004 – To identify a document.
      Type: an, Max Length: 70
    • 1373 – Code specifying the status of a document.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – The specified document is accepted.
      • 2 – Notice that a specific document will be accompanying the goods.
      • 3 – The specified document is conditionally accepted.
      • 4 – Notice that a specific document/message will be transmitted via a separate EDI message.
      • 5 – Notice that the specific document or message is for information only.
      • 6 – Notice that a specific document or message will not be sent via EDI.
      • 7 – Request for a specific message to be formatted and transmitted or a request for a specific document to be raised and sent.
      • 8 – The specified document is rejected.
      • 9 – The document or message is to be printed.
      • 10 – Specific document is currently valid.
      • 11 – Specified document is not available.
      • 12 – Customs declaration to which the document is related completed or exhaust the allowance stated on the document. The document is attached to the Customs declaration.
      • 13 – Customs declaration to which the document is related does not complete or exhaust the allowance stated on the document . The document is not attached to the declaration but has already been lodged in the Customs station.
      • 14 – Customs declaration to which the document is related completed or exhaust the allowance stated on the document. The usage of the document is complete. The document is not attached to the declaration but has already been lodged in the Customs station.
      • 15 – Customs declaration to which the document is related does not complete or exhaust the allowance stated on the document. The document can continue to be used for future declarations until the allowance is exhausted. The document is not attached to the declaration but has already been lodged in the Customs station.
      • 16 – Specified document is not or cannot be attached.
      • 17 – Document not attached to the Customs declaration but is attached to the goods.
      • 18 – Specified document is attached to the Customs declaration and will be required to be returned to the declarant after Customs endorsement.
      • 19 – Application has been submitted for that document.
      • 20 – Indicates that the document has legal validity from the date of receival of the cargo.

      Showing 20 of 37 values defined for element 1373 in D10B.

    • 1366 – Free form description of the source of a document.
      Type: an, Max Length: 70
    • 3453 – Code specifying the language name.
      Type: an, Max Length: 3
    • 1056 – To identify a version.
      Type: an, Max Length: 9
    • 1060 – To identify a revision.
      Type: an, Max Length: 6
  • 3153 – Code specifying the type of communication medium.
    Type: an, Max Length: 3
    Valid Codes:
    • AA – A process that, on demand, connects two or more data terminal equipments and permits the exclusive use of a data circuit between them until the connection is released (ISO).
    • AB – Communications number assigned by Societe Internationale de Telecommunications Aeronautiques (SITA).
    • AC – Communications number assigned by Aeronautical Radio Inc.
    • AD – A communication channel identifying a courier.
    • AE – Express (e.g. overnight) postal service document delivery.
    • CA – The cable is used as communication medium.
    • EI – Number identifying the service and service user.
    • EM – Exchange of mail by electronic means.
    • EX – Telephone extension.
    • FT – According to ISO.
    • FX – Device used for transmitting and reproducing fixed graphic material (as printing) by means of signals over telephone lines or other electronic transmission media.
    • GM – GEIS mailbox system is used as communication medium.
    • IE – IBM IE is used as communication medium.
    • IM – Internal mail address/number.
    • MA – Postal service document delivery.
    • PB – Postbox system is used as communication medium.
    • PS – The process of routing and transferring data by means of addressed packets so that a channel is occupied only during the transmission; upon completion of the transmission the channel is made available for the transfer of other packets (ISO).
    • SW – Communications address assigned by Society for Worldwide Interbank Financial Telecommunications s.c.
    • TE – Voice/data transmission by telephone.
    • TG – Text transmission via telegraph.

    Showing 20 of 25 values defined for element 3153 in D10B.

  • 1220 – Quantity of document copies required.
    Type: n, Max Length: 2
  • 1218 – Quantity of document originals required.
    Type: n, Max Length: 2
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1)

Elements and codes as defined at NAD above.

DTM To specify date, and/or time, or period. (Max 9)

Elements and codes as defined at DTM above.

Group SG12 (Max 999)
EVE To specify details about events. (Max 1) Required
  • C004 – To specify the event category.
    • 9637 – Code specifying the event category.
      Type: an, Max Length: 3
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

    • 9636 – Free form description of the event category.
      Type: an, Max Length: 70
  • C030 – To specify the type of event.
    • 9171 – Code specifying an event type.
      Type: an, Max Length: 3
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

    • 9170 – Free form description of the event type.
      Type: an, Max Length: 70
  • C063 – To identify an event.
    • 9173 – Code specifying an event.
      Type: an, Max Length: 35
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

    • 9172 – Free form description of the event.
      Type: an, Max Length: 256
  • 9635 – Code qualifying the event details.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – The event is a claim.
    • 2 – The event is a bankruptcy case.
  • 1229 – Code specifying the action to be taken or already taken.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – The information is to be or has been added.
    • 2 – The information is to be or has been deleted.
    • 3 – The information is to be or has been changed.
    • 4 – This line item is not affected by the actual message.
    • 5 – This line item is entirely accepted by the seller.
    • 6 – This line item is accepted but amended by the seller.
    • 7 – This line item is not accepted by the seller.
    • 8 – Code specifying that the message is a schedule only.
    • 9 – Code specifying that amendments are requested/notified.
    • 10 – This line item is not found in the referenced message.
    • 11 – This line is not amended by the buyer.
    • 12 – Code specifying that the line item numbers have changed.
    • 13 – Buyer has deducted amount from payment.
    • 14 – Buyer has a claim against an outstanding invoice.
    • 15 – Factor has been requested to charge back the outstanding item.
    • 16 – Seller agrees to issue a credit note.
    • 17 – New settlement terms have been agreed.
    • 18 – Factor agrees to abide by the outcome of negotiations between seller and buyer.
    • 19 – Seller does not accept validity of dispute.
    • 20 – The reported situation is settled.

    Showing 20 of 115 values defined for element 1229 in D10B.

DTM To specify date, and/or time, or period. (Max 9)

Elements and codes as defined at DTM above.

IMD To describe an item in either an industry or free format. (Max 9)

Elements and codes as defined at IMD above.

NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1)

Elements and codes as defined at NAD above.

FTX To provide free form or coded text information. (Max 9)
  • C107 – Coded reference to a standard text and its source.
    • 4441 – Code specifying free form text.
      Type: an, Max Length: 17 (Required)
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

  • C108 – Free text; one to five lines.
    • 4440 – Free form text.
      Type: an, Max Length: 512 (Required)
    • 4440 – Free form text.
      Type: an, Max Length: 512
    • 4440 – Free form text.
      Type: an, Max Length: 512
    • 4440 – Free form text.
      Type: an, Max Length: 512
    • 4440 – Free form text.
      Type: an, Max Length: 512
  • 4451 – Code qualifying the subject of the text.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • AAA – [7002] Plain language description of the nature of a goods item sufficient to identify it for customs, statistical or transport purposes.
    • AAB – [4276] Free form description of the conditions of payment between the parties to a transaction.
    • AAC – [7488] Additional information concerning dangerous substances and/or article in a consignment.
    • AAD – [7254] Proper shipping name, supplemented as necessary with the correct technical name, by which a dangerous substance or article may be correctly identified, or which is sufficiently informative to permit identification by reference to generally available literature.
    • AAE – The content of an acknowledgement.
    • AAF – Specific details applying to rates.
    • AAG – Indicates that the segment contains instructions to be passed on to the identified party.
    • AAI – The text contains general information.
    • AAJ – Additional conditions specific to this order or project.
    • AAK – Information on the price conditions that are expected or given.
    • AAL – Expression of a number in characters as length of ten meters.
    • AAM – Technical or commercial reasons why a piece of equipment may not be re-used after the current transport terminates.
    • AAN – Restrictions in handling depending on the technical characteristics of the piece of equipment or on the nature of the goods.
    • AAO – Error described by a free text.
    • AAP – Free text of the response to a communication.
    • AAQ – A description of the contents of a package.
    • AAR – (4053) Free text of the non Incoterms terms of delivery. For Incoterms, use: 4053.
    • AAS – The remarks printed or to be printed on a bill of lading.
    • AAT – Free text information on an IATA Air Waybill to indicate means by which account is to be settled.
    • AAU – Information pertaining to the invoice covering the consignment.

    Showing 20 of 366 values defined for element 4451 in D10B.

  • 4453 – Code specifying the function of free text.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – The occurrence of this text does not affect message processing.
    • 2 – Text description of a coded data item for which there is no currently available code.
    • 3 – Text must be read before actioning message.
    • 4 – Pass text on to later recipient.
    • 5 – Indicates that the text is to be taken as a header.
    • 6 – Indicates that the text starts a new numbered paragraph.
    • 7 – Indicates that the text is a paragraph.
  • 3453 – Code specifying the language name.
    Type: an, Max Length: 3
  • 4447 – Code specifying the format of free text.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – The associated text is centred in the available space.
    • 2 – The associated text item is aligned flush left in the available space.
    • 3 – The associated text is aligned flush right in the available space.
    • 4 – The associated text is justified in the available space.
    • 5 – The text is to be preceded by one blank line.
    • 6 – The text is to be preceded by two blank lines.
    • 7 – The text is to be preceded by three blank lines.
    • 8 – The text is a continuation of preceding text.
    • 9 – The text is to begin on a new page.
    • 10 – The text is the final section of the preceding text.
    • 11 – The text is to begin a new line.
Group SG13 (Max 1)
CCI To identify and describe a specific characteristic and its relevance for subsequent business processes. (Max 1) Required

Elements and codes as defined at CCI above.

CAV To provide the value of a characteristic. (Max 99)

Elements and codes as defined at CAV above.

Group SG14 (Max 9)
MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 1) Required

Elements and codes as defined at MEA above.

GPO To specify a geographical position. (Max 9999)

Elements and codes as defined at GPO above.

Group SG15 (Max 99)
IFD To specify details about items of information. (Max 1) Required
  • C009 – To specify the category of information.
    • 9615 – Code specifying the information category.
      Type: an, Max Length: 3
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

    • 9614 – Free form description of the category of information.
      Type: an, Max Length: 70
  • C010 – To specify the type of information.
    • 4473 – Code specifying a type of information.
      Type: an, Max Length: 4
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

    • 4472 – Text representation of a type of information.
      Type: an, Max Length: 35
  • C011 – To provide the information details.
    • 9617 – Code specifying the information detail.
      Type: an, Max Length: 17
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

    • 9616 – Free form description of the information detail.
      Type: an, Max Length: 256
  • 9633 – Code qualifying the information details.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – Identifies information related to the business.
  • 4405 – Code specifying a status.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – Remark that the requested service in the order remains outstanding.
    • 2 – The instruction has been completed.
    • 3 – The information has been passed on.
    • 4 – The amount has the status of finality.
    • 5 – The amount is subject to finality.
    • 6 – The amount quoted is a minimum tariff.
    • 7 – The amount quoted is a fixed tariff.
    • 8 – The amount quoted is a maximum tariff.
    • 9 – The amount is quoted for information only, it is not part of the charges to be deducted or added.
    • 10 – The amount is available today.
    • 11 – The amount is available on the next banking office day after the booking date.
    • 12 – The amount is available on the second banking office day after the booking date.
    • 13 – The amount available on the third banking office day after the booking date.
    • 14 – Funds not collected by beneficiary.
    • 15 – The amount or quantity is zero.
    • 16 – No status or condition has been advised.
    • 17 – A status or condition has been requested.
    • 18 – No charge is to be made.
    • 19 – The quantity has been the subject of a rounding operation.
    • 20 – Intended to last or function indefinitely.

    Showing 20 of 145 values defined for element 4405 in D10B.

PIA To specify additional or substitutional item identification codes. (Max 9)

Elements and codes as defined at PIA above.

QTY To specify a pertinent quantity. (Max 9)

Elements and codes as defined at QTY above.

NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1)

Elements and codes as defined at NAD above.

Group SG16 (Max 99)
COD To provide component details of an object (e.g. product, container) such as its type and the material of which it is composed. (Max 1) Required
  • C823 – To identify the type of unit/component of an object (e.g. lock, door, tyre).
    • 7505 – Code specifying a type of unit or component.
      Type: an, Max Length: 3
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

    • 7504 – Free form description of a type of unit or component.
      Type: an, Max Length: 35
  • C824 – To identify the material of which a component is composed (e.g. steel, plastics).
    • 7507 – Code specifying a component material.
      Type: an, Max Length: 3
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 381 values defined for element 3055 in D10B.

    • 7506 – Free form description of a component material.
      Type: an, Max Length: 35
MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 1)

Elements and codes as defined at MEA above.

Group SG17 (Max 9)
CCI To identify and describe a specific characteristic and its relevance for subsequent business processes. (Max 1) Required

Elements and codes as defined at CCI above.

CAV To provide the value of a characteristic. (Max 1)

Elements and codes as defined at CAV above.

Group SG18 (Max 999)
RFF To specify a reference. (Max 1) Required

Elements and codes as defined at RFF above.

QTY To specify a pertinent quantity. (Max 9)

Elements and codes as defined at QTY above.

MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 1)

Elements and codes as defined at MEA above.

Group SG19 (Max 99)
DOC To identify documents and details directly related to it. (Max 1) Required

Elements and codes as defined at DOC above.

NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1)

Elements and codes as defined at NAD above.

DTM To specify date, and/or time, or period. (Max 9)

Elements and codes as defined at DTM above.

Group SG20 (Max 1)
HYN A segment to identify hierarchical connections from a given item to a higher or lower levelled item or to identify dependencies among the content of hierarchically related groups of data. (Max 1) Required

Elements and codes as defined at HYN above.

NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1)

Elements and codes as defined at NAD above.

FTX To provide free form or coded text information. (Max 9)

Elements and codes as defined at FTX above.

Group SG21 (Max 9)
RFF To specify a reference. (Max 1) Required

Elements and codes as defined at RFF above.

DTM To specify date, and/or time, or period. (Max 1)

Elements and codes as defined at DTM above.

UNT Unknown Segment (Max 1) Required

Sources and further reading