Try it now Login

UN/EDIFACT D98A MSCONS Message

Review the MSCONS segment sequence, mandatory fields, repeat counts and valid codes for the D98A EDIFACT directory.

Jump to Segment
UNH
BGM
DTM
RFF
DTM
NAD
RFF
DTM
CTA
COM
UNS
NAD
LOC
DTM
RFF
DTM
CCI
DTM
LIN
PIA
IMD
PRI
NAD
MOA
QTY
DTM
CCI
MEA
DTM
CNT
UNT
UNH Unknown Segment (Max 1) Required
BGM To indicate the type and function of a message and to transmit the identifying number. (Max 1) Required
  • C002 – Identification of a type of document/message by code or name. Code preferred.
    • 1001 – Document/message identifier expressed in code.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Certificate providing the values of an analysis.
      • 2 – Certificate certifying the conformity to predefined definitions.
      • 3 – Certificate certifying the quality of goods, services etc.
      • 4 – Report providing the results of a test session.
      • 5 – Report specifying the performance values of products.
      • 6 – Report providing specification values of products.
      • 7 – Reports on events during production process.
      • 8 – Self explanatory.
      • 9 – Self explanatory.
      • 10 – Document/message providing basic data concerning a party.
      • 11 – A pre-approved document relating to federal label approval requirements.
      • 12 – Certificate certifying a specific quality of agricultural products.
      • 13 – Document/message which evidences the transport of goods by post (e.g. mail, parcel, etc.).
      • 14 – Certificate certifying the weight of goods.
      • 15 – Document/message specifying the weight of goods.
      • 16 – Document by means of which the documentary credit applicant specifies the conditions for the certificate and by whom the certificate is to be issued.
      • 17 – Document identifying goods in which the issuing authority expressly certifies that the goods originate in a specific country or part of, or group of countries. It also states the price and/or cost of the goods with the purpose of determining the customs origin.
      • 18 – Specific form of transit declaration issued by the exporter (movement certificate).
      • 19 – Certificate certifying the quantity of goods, services etc.
      • 20 – Usage of QALITY-message.

      Showing 20 of 458 values defined for element 1001 in D98A.

    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 135 values defined for element 1131 in D98A.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – EDI Forum for companies with Interest in Computing and Electronics (EDI project for EDP/ADP sector).
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 213 values defined for element 3055 in D98A.

    • 1000 – Plain language identifier specifying the function of a document/message.
      Type: an, Max Length: 35
  • C106 – Identification of a document/message by its number and eventually its version or revision.
    • 1004 – Reference number assigned to the document/message by the issuer.
      Type: an, Max Length: 35
    • 1056 – To specify the version number or name of an object.
      Type: an, Max Length: 9
    • 1060 – To specify a revision number.
      Type: an, Max Length: 6
  • 1225 – Code indicating the function of the message.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – Message cancelling a previous transmission for a given transaction.
    • 2 – Message containing items (e.g. line items, goods items, Customs items, equipment items) to be added to a previously sent message.
    • 3 – Message containing items (e.g. line items, goods items, Customs items, equipment items) to be deleted from a previously sent message.
    • 4 – Message containing items (e.g. line items, goods items, Customs items, equipment items) to be changed in a previously sent message.
    • 5 – Message replacing a previous message.
    • 6 – Message confirming the details of a previous transmission where such confirmation is required or recommended under the terms of a trading partner agreement.
    • 7 – The message is a duplicate of a previously generated message.
    • 8 – Description to be provided.
    • 9 – Initial transmission related to a given transaction.
    • 10 – Message whose reference number is not filed.
    • 11 – Message responding to a previous message or document.
    • 12 – Message indicating that the referenced message was received but not yet processed.
    • 13 – Self explanatory.
    • 14 – Self explanatory.
    • 15 – Repeated message transmission for reminding purposes.
    • 16 – Message content is a proposal.
    • 17 – Referenced transaction cancelled, reissued message will follow.
    • 18 – New issue of a previous message (maybe cancelled).
    • 19 – Change information submitted by buyer but initiated by seller.
    • 20 – Message to replace the heading of a previous message.

    Showing 20 of 59 values defined for element 1225 in D98A.

  • 4343 – Code specifying the type of acknowledgment required or transmitted.
    Type: an, Max Length: 3
    Valid Codes:
    • AA – Receiver of the payment message needs to return a debit advice in response to the payment message.
    • AB – Indicates that an acknowledgement relating to receipt of message is required.
    • AC – Acknowledge complete including changes.
    • AD – Acknowledge complete without changes.
    • AF – The sender wishes to receive both a Debit Advice and an acknowledgement of receipt for a payment message.
    • AG – Authentication, by a party, of a document established for him by another party.
    • AI – Acknowledgement of changes only is required.
    • AJ – Indication that the referenced offer or transaction (e.g. cargo booking or quotation request) is being dealt with.
    • AP – Indication that the referenced offer or transaction (e.g., cargo booking or quotation request) has been accepted.
    • AQ – The sender of the message expects a response.
    • AR – Documentary credit collection forwarded directly.
    • AS – The receiver of the message is to acknowledge receipt of the message and sent a credit advice for each credit.
    • CA – Indication that the referenced offer or transaction (e.g., cargo booking or quotation request) has been accepted under conditions indicated in this message.
    • CO – Indication that the message contains the physical measurements on which the charges will be based.
    • NA – Self explanatory.
    • RE – Indication that the referenced offer or transaction (e.g., cargo booking or quotation request) is not accepted.
DTM To specify date, and/or time, or period. (Max 9) Required
  • C507 – Date and/or time, or period relevant to the specified date/time/period type.
    • 2005 – Code giving specific meaning to a date, time or period.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • 2 – Date on which buyer requests goods to be delivered.
      • 3 – [2376] Date when a Commercial Invoice is issued.
      • 4 – [2010] Date when an order is issued.
      • 7 – Date and/or time at which specified event or document becomes effective.
      • 8 – Date/time when the purchase order is received by the seller.
      • 9 – Date/time of processing.
      • 10 – Date on which goods should be shipped or despatched by the supplier.
      • 11 – (2170) Date/time on which the goods are or are expected to be despatched or shipped.
      • 12 – Date by which payment should be made if discount terms are to apply.
      • 13 – Date by which payment must be made.
      • 14 – Date/time when instalments are due.
      • 15 – Date/time when promotion activities begin.
      • 16 – Date/time when promotion activities end.
      • 17 – Date and/or time when the shipper of the goods expects delivery will take place.
      • 18 – Self explanatory.
      • 20 – Date/time when cheque is issued.
      • 21 – Description to be provided.
      • 22 – Date/time when freight bill is issued.
      • 35 – Date/time on which goods or consignment are delivered at their destination.
      • 36 – Date of expiry of the validity of a referenced document, price information or any other referenced data element with a limited validity period.

      Showing 20 of 412 values defined for element 2005 in D98A.

    • 2380 – The value of a date, a date and time, a time or of a period in a specified representation.
      Type: an, Max Length: 35
    • 2379 – Specification of the representation of a date, a date and time or of a period.
      Type: an, Max Length: 3
      Valid Codes:
      • 2 – Calendar date: D = Day; M = Month; Y = Year.
      • 3 – Calendar date: M = Month; D = Day; Y = Year.
      • 101 – Calendar date: Y = Year; M = Month; D = Day.
      • 102 – Calendar date: C = Century ; Y = Year ; M = Month ; D = Day.
      • 103 – Calendar week day: Y = Year ; W = Week ; D = Day Week number 01 is always first week of January Day number 1 is always Monday.
      • 105 – Calendar day: Y = Year ; D = Day January the first = Day 001 Always start numbering the days of the year from January 1st through December 31st.
      • 106 – Day of a month: M = Month; D = Day.
      • 107 – Day's number within a specific year: D = Day.
      • 108 – Week's number within a specific year: W = Week.
      • 109 – Month's number within a specific year: M = Month.
      • 110 – Day's number within is a specific month: D = Day.
      • 201 – Calendar date including time without seconds: Y = Year; M = Month; D = Day; H = Hour; M = Minute.
      • 202 – Calendar date including time with seconds: Y = Year; M = Month; D = Day; H = Hour; m = Minutes = Seconds.
      • 203 – Calendar date including time with minutes: C=Century; Y=Year; M=Month; D=Day; H=Hour; M=Minutes.
      • 204 – Calendar date including time with seconds: C=Century;Y=Year; M=Month;D=Day;H=Hour;M=Minute;S=Second.
      • 301 – See 201 + Z = Time zone.
      • 302 – See 202 + Z = Time zone.
      • 303 – See 203 plus Z=Time zone.
      • 304 – See 204 plus Z=Time zone.
      • 305 – Month, day, hours, minutes; M = Month; D = Day; H = Hour; M = Minute.

      Showing 20 of 70 values defined for element 2379 in D98A.

Group SG1 (Max 9)
RFF To specify a reference. (Max 1) Required
  • C506 – Identification of a reference.
    • 1153 – Code giving specific meaning to a reference segment or a reference number.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • AAA – [1018] Reference number assigned by the seller to his acknowledgement of an order.
      • AAB – [1088] Reference number assigned by the seller to a Proforma Invoice.
      • AAC – [1172] Reference number assigned by issuing bank to a Documentary credit.
      • AAD – [1318] Reference number assigned by the issuer to a Contract Addendum.
      • AAE – Reference number assigned to a goods declaration.
      • AAG – Reference number assigned by issuing party to an offer.
      • AAJ – Reference number assigned by issuer to a delivery order.
      • AAK – Reference number assigned by issuing party to a despatch advice.
      • AAL – Reference number identifying a specific product drawing.
      • AAM – Reference number assigned to a waybill, see: 1001 = 700.
      • AAN – Reference number assigned by buyer to a delivery schedule.
      • AAO – [1362] Reference assigned by the consignee to a shipment.
      • AAP – [1310] Reference to a specific consignment forming part of a contract allowing part deliveries.
      • AAQ – [8260] Marks (letters and/or numbers) which identify a unit load device e.g. freight container.
      • AAS – [1188] Reference assigned by the carrier or his agent to the transport document.
      • AAT – Identifies the master label number of any package type.
      • AAU – [1128] Reference number assigned by the seller to a Despatch Note.
      • AAV – Reference number assigned to an enquiry.
      • AAY – Reference number assigned by the carriers agent to a transaction.
      • AAZ – For maritime shipments, this code qualifies a Standard Alpha Carrier Code (SCAC) as issued by the United Stated National Motor Traffic Association Inc.

      Showing 20 of 564 values defined for element 1153 in D98A.

    • 1154 – Identification number the nature and function of which can be qualified by an entry in data element 1153 Reference qualifier.
      Type: an, Max Length: 35
    • 1156 – Number of the line in the document/message referenced in 1154 Reference number.
      Type: an, Max Length: 6
    • 4000 – To uniquely identify a reference by its version number.
      Type: an, Max Length: 35
DTM To specify date, and/or time, or period. (Max 9)

Elements and codes as defined at DTM above.

Group SG2 (Max 99)
NAD To specify the name/address and their related function, either by CO82 only and/or unstructured by CO58 or structured by CO80 thru 3207. (Max 1) Required
  • C082 – Identification of a transaction party by code.
    • 3039 – Code identifying a party involved in a transaction.
      Type: an, Max Length: 35 (Required)
    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 135 values defined for element 1131 in D98A.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – EDI Forum for companies with Interest in Computing and Electronics (EDI project for EDP/ADP sector).
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 213 values defined for element 3055 in D98A.

  • C058 – Unstructured name and address: one to five lines.
    • 3124 – Free form name and address description.
      Type: an, Max Length: 35 (Required)
    • 3124 – Free form name and address description.
      Type: an, Max Length: 35
    • 3124 – Free form name and address description.
      Type: an, Max Length: 35
    • 3124 – Free form name and address description.
      Type: an, Max Length: 35
    • 3124 – Free form name and address description.
      Type: an, Max Length: 35
  • C080 – Identification of a transaction party by name, one to five lines. Party name may be formatted.
    • 3036 – Name of a party involved in a transaction.
      Type: an, Max Length: 35 (Required)
    • 3036 – Name of a party involved in a transaction.
      Type: an, Max Length: 35
    • 3036 – Name of a party involved in a transaction.
      Type: an, Max Length: 35
    • 3036 – Name of a party involved in a transaction.
      Type: an, Max Length: 35
    • 3036 – Name of a party involved in a transaction.
      Type: an, Max Length: 35
    • 3045 – Specification of the representation of a party name.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Name component 1: Family name. Name component 2: Given name or initials. Name component 3: Given name or initials. Name component 4: Maiden name. Name component 5: Title Group of name components transmitted in sequence with name component 1 transmitted first. The maiden name is the family name given at birth of a female. Other names are self-explanatory.
  • C059 – Street address and/or PO Box number in a structured address: one to four lines.
    • 3042 – Street and number in plain language, or Post Office Box No.
      Type: an, Max Length: 35
    • 3042 – Street and number in plain language, or Post Office Box No.
      Type: an, Max Length: 35
    • 3042 – Street and number in plain language, or Post Office Box No.
      Type: an, Max Length: 35
    • 3042 – Street and number in plain language, or Post Office Box No.
      Type: an, Max Length: 35
  • 3035 – Code giving specific meaning to a party.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • AA – Party to be billed in accordance with AAR Accounting rule 11.
    • AB – Third party who arranged the purchase of merchandise on behalf of the actual buyer.
    • AE – Any natural or legal person who makes a declaration to an official body on behalf of another natural or legal person, where legally permitted (CCC).
    • AF – Natural or legal person responsible for the satisfactory performance of a Customs transit operation. Source: CCC.
    • AG – (3196) Party authorized to act on behalf of another party.
    • AH – Agent acting on behalf of the transit principal (CCC).
    • AI – Person who has been chosen for a job.
    • AJ – The party which has issued all mutually agreed codes used in the message.
    • AK – Party to whom acknowledgement should be sent.
    • AL – (3340) Party accepting liability for goods held or moving (e.g. transit) under a Customs authorization and - when applicable - a guarantee.
    • AM – Employee of a company or firm authorized to act on behalf of that company or firm e.g. to make a Customs declaration.
    • AN – Person or company which is authorised by the relevant Customs authority to import goods without payment all taxes or specific taxes at the point of entry into the country.
    • AO – Party account is assigned to.
    • AP – (3352) Party accepting goods, products, services etc.
    • AQ – Person or company approved by the relevant authority in the country to pack and export specific goods under Customs supervision.
    • AR – Exporter authorized/approved by Customs for special Customs procedures e.g. simplified procedure.
    • AS – Identifies the financial institution servicing the account(s).
    • AT – Importer authorized/approved by Customs for special Customs procedures e.g. simplified procedure.
    • AU – Trader authorized/approved by Customs for special transit procedures e.g. simplified procedure.
    • AV – Party that has delegated the authority to take a certain action on behalf of a company or agency.

    Showing 20 of 353 values defined for element 3035 in D98A.

  • 3164 – Name of a city (a town, a village) for addressing purposes.
    Type: an, Max Length: 35
  • 3229 – Identification of the name of sub-entities (state, province) defined by appropriate governmental agencies.
    Type: an, Max Length: 9
  • 3251 – Code defining postal zones or addresses.
    Type: an, Max Length: 9
  • 3207 – Identification of the name of a country or other geographical entity as specified in ISO 3166.
    Type: an, Max Length: 3
Group SG3 (Max 9)
RFF To specify a reference. (Max 1) Required

Elements and codes as defined at RFF above.

DTM To specify date, and/or time, or period. (Max 9)

Elements and codes as defined at DTM above.

Group SG4 (Max 9)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
  • C056 – Code and/or name of a department or employee. Code preferred.
    • 3413 – Internal identification code.
      Type: an, Max Length: 17
    • 3412 – The department or person within an organizational entity.
      Type: an, Max Length: 35
  • 3139 – Code specifying the function of a contact (e.g. department or person).
    Type: an, Max Length: 3
    Valid Codes:
    • AA – Department/person to contact for matters regarding insurance.
    • AB – Department/person to contact for matters regarding the workshop.
    • AC – Department/person in charge of accepting incoming goods.
    • AD – The contact responsible for accounting matters.
    • AE – Department/person to contact for matters regarding contracts.
    • AF – Department/person to contact for matters regarding land registry.
    • AG – Department/person of the agent which acts on behalf of another party.
    • AH – Department/person to contact for matters regarding technical coordination of works.
    • AI – Department/person to contact for matters regarding project management on behalf of the contractor.
    • AJ – Department/person to contact for matters regarding investments.
    • AK – Department/person to contact for matters regarding management of works on behalf of the owner.
    • AL – Department/person to contact for matters regarding personnel (human resources).
    • AM – Department/person to contact for matters regarding claims.
    • AN – Department/person to contact for laboratory matters.
    • AO – Department/person to contact for matters regarding plant/equipment.
    • AP – Department/person responsible for the accounts payable function within a corporation.
    • AQ – Department/person to contact for matters regarding quantity surveying.
    • AR – Department/person responsible for the accounts receivable within a corporation.
    • AS – Department/person to contact for matters regarding public relations.
    • AT – Department/person to contact for matters regarding technical issues.

    Showing 20 of 88 values defined for element 3139 in D98A.

COM To identify a communication number of a department or a person to whom communication should be directed. (Max 9)
  • C076 – Communication number of a department or employee in a specified channel.
    • 3148 – The communication number.
      Type: an, Max Length: 512 (Required)
    • 3155 – Code identifying the type of communication channel being used.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • AA – A process that, on demand, connects two or more data terminal equipments and permits the exclusive use of a data circuit between them until the connection is released (ISO).
      • AB – Communications number assigned by Societe Internationale de Telecommunications Aeronautiques (SITA).
      • AC – Communications number assigned by Aeronautical Radio Inc.
      • AD – AT&T mailbox identifier.
      • AE – Peripheral device identification.
      • AF – The switched telecommunications network of the United States Department of Defense.
      • AG – The switched telecommunications network of the United States government.
      • AH – Data exchange via the World Wide Web.
      • CA – Self explanatory.
      • EI – Number identifying the service and service user.
      • EM – Exchange of mail by electronic means.
      • EX – Telephone extension.
      • FT – According to ISO.
      • FX – Device used for transmitting and reproducing fixed graphic material (as printing) by means of signals over telephone lines or other electronic transmission media.
      • GM – Self explanatory.
      • IE – Self explanatory.
      • IM – Internal mail address/number.
      • MA – Postal service document delivery.
      • PB – Self explanatory.
      • PS – The process of routing and transferring data by means of addressed packets so that a channel is occupied only during the transmission; upon completion of the transmission the channel is made available for the transfer of other packets (ISO).

      Showing 20 of 28 values defined for element 3155 in D98A.

UNS Unknown Segment (Max 1) Required
Group SG5 (Max 99999) Required
NAD To specify the name/address and their related function, either by CO82 only and/or unstructured by CO58 or structured by CO80 thru 3207. (Max 1) Required

Elements and codes as defined at NAD above.

Group SG6 (Max 99999) Required
LOC To identify a place or a location and/or related locations. (Max 1) Required
  • C517 – Identification of a location by code or name.
    • 3225 – Identification of the name of place/location, other than 3164 City name.
      Type: an, Max Length: 25
    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 135 values defined for element 1131 in D98A.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – EDI Forum for companies with Interest in Computing and Electronics (EDI project for EDP/ADP sector).
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 213 values defined for element 3055 in D98A.

    • 3224 – Name of place/location, other than 3164 City name.
      Type: an, Max Length: 70
  • C519 – Identification the first related location by code or name.
    • 3223 – Specification of the first related place/location by code.
      Type: an, Max Length: 25
    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 135 values defined for element 1131 in D98A.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – EDI Forum for companies with Interest in Computing and Electronics (EDI project for EDP/ADP sector).
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 213 values defined for element 3055 in D98A.

    • 3222 – Specification of the first related place/location by name.
      Type: an, Max Length: 70
  • C553 – Identification of second related location by code or name.
    • 3233 – Specification of a second related place/location by code.
      Type: an, Max Length: 25
    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 135 values defined for element 1131 in D98A.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – EDI Forum for companies with Interest in Computing and Electronics (EDI project for EDP/ADP sector).
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 213 values defined for element 3055 in D98A.

    • 3232 – Specification of a second related place/location by name.
      Type: an, Max Length: 70
  • 3227 – Code identifying the function of a location.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • 1 – (3018) Point or port of departure, shipment or destination, as required under the applicable terms of delivery, e.g. Incoterms.
    • 2 – Place where funds are to be, or have been made available to the creditor.
    • 4 – Place at which the goods have been received.
    • 5 – (3214) Port, airport or other location from which a means of transport is scheduled to depart or has departed.
    • 7 – (3246) Place to which the goods are to be finally delivered under transport contract terms (operational term).
    • 8 – Port, airport or other location to which a means of transport is destined.
    • 9 – (3334 + 3230) Seaport, airport, freight terminal, rail station or other place at which the goods (cargo) are loaded on to the means of transport being used for their carriage.
    • 10 – (3348) Place at which the goods are taken over by the carrier.
    • 11 – (3392 + 3414) Seaport, airport, freight terminal, rail station or other place at which the goods (cargo) are unloaded from the means of transport having been used for their carriage.
    • 12 – Port at which the goods are discharged from the vessel used for their transport.
    • 13 – (3424) Place where goods are transferred from one means of transport to another (operational term).
    • 14 – (3384) Place where goods are located and where they are available for examination.
    • 15 – Place where the responsibility is transferred.
    • 16 – Place where the ownership of the goods is transferred.
    • 17 – Place where goods are transported across a country border.
    • 18 – (3156) Warehouse where a particular consignment has been stored.
    • 19 – Factory/plant relevant for a particular consignment.
    • 20 – Place where goods will ultimately be delivered.
    • 21 – Place of departure, shipment or destination as specified in the terms of sale agreed between the parties.
    • 22 – (3080) Place where Customs clearance procedure occur (CCC).

    Showing 20 of 178 values defined for element 3227 in D98A.

  • 5479 – To specify the relationship between two or more items.
    Type: an, Max Length: 3
DTM To specify date, and/or time, or period. (Max 9)

Elements and codes as defined at DTM above.

Group SG7 (Max 99)
RFF To specify a reference. (Max 1) Required

Elements and codes as defined at RFF above.

DTM To specify date, and/or time, or period. (Max 9)

Elements and codes as defined at DTM above.

Group SG8 (Max 99)
CCI To identify and describe a specific characteristic and its relevance for subsequent business processes. (Max 1) Required
  • C502 – Identification of measurement type.
    • 6313 – Specification of the property measured.
      Type: an, Max Length: 3
      Valid Codes:
      • A – Description to be provided.
      • AAA – [6160] Weight (mass) of goods including any packing normally going with them to a buyer in a retail sale.
      • AAB – [6292] Weight (mass) of goods including packing but excluding the carrier's equipment.
      • AAC – Self explanatory.
      • AAD – [6292] Weight (mass) of goods including packing but excluding the carrier's equipment.
      • AAE – Gross weight at line item level.
      • AAF – [6048] Weight (mass) of the goods themselves without any packing.
      • AAG – Self explanatory.
      • AAH – Description to be provided.
      • AAI – Measurement reportable for visaed merchandise.
      • AAJ – The number of units contained on a pallet.
      • AAK – An indication of the fat content of a product.
      • AAL – [6160] Weight (mass) of goods including any packing normally going with them to a buyer in a retail sale.
      • AAM – [6300] The measure of the overall size of a ship determined in accordance with the provisions of the International Convention on Tonnage Measurement of Ships, 1969.
      • AAN – [6302] The measure of the useful capacity of a ship determined in accordance with the provisions of the International Convention on Tonnage Measurement of Ships, 1969.
      • AAO – Self-explanatory.
      • AAP – Self-explanatory.
      • AAQ – Value of energy consumption.
      • AAR – Self-explanatory.
      • AAS – Self-explanatory.

      Showing 20 of 236 values defined for element 6313 in D98A.

    • 6321 – Code specifying the significance of a measurement value.
      Type: an, Max Length: 3
      Valid Codes:
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – Self explanatory.
      • 8 – Self explanatory.
      • 10 – Self explanatory.
      • 11 – Description to be provided.
      • 12 – Description to be provided.
      • 13 – Description to be provided.
      • 15 – Self explanatory.
    • 6155 – Code used to specify non-discrete measurement values.
      Type: an, Max Length: 17
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Self explanatory.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – Self explanatory.
      • 8 – Self explanatory.
      • 9 – Self explanatory.
      • 10 – Self explanatory.
      • 11 – Self explanatory.
      • 12 – Self explanatory.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 18 – Self explanatory.
      • 19 – Self explanatory.
      • 20 – Self explanatory.
      • 21 – Self explanatory.

      Showing 20 of 42 values defined for element 6155 in D98A.

    • 6154 – To specify non-discrete measurement values.
      Type: an, Max Length: 70
  • C240 – Specific product characteristic data.
    • 7037 – A code from an industry code list which provides specific data about a product characteristic.
      Type: an, Max Length: 17 (Required)
    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 135 values defined for element 1131 in D98A.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – EDI Forum for companies with Interest in Computing and Electronics (EDI project for EDP/ADP sector).
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 213 values defined for element 3055 in D98A.

    • 7036 – Free form description of the product characteristic.
      Type: an, Max Length: 35
    • 7036 – Free form description of the product characteristic.
      Type: an, Max Length: 35
  • 7059 – Specification of the type of class.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – Self explanatory.
    • 2 – Mechanical properties.
    • 3 – Component being quantitatively measured (such as height).
    • 4 – System being investigated to obtain a measurable quantity (such as blood serum).
  • 4051 – To specify the relevance of a characteristic.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – This product characteristic provides additional information for customer.
    • 2 – This product characteristic has to be provided within orders.
    • 3 – This product characteristic has to be provided within the subsequent business transactions.
DTM To specify date, and/or time, or period. (Max 99)

Elements and codes as defined at DTM above.

Group SG9 (Max 99999)
LIN To identify a line item and configuration. (Max 1) Required
  • C212 – Goods identification for a specified source.
    • 7140 – A number allocated to a group or item.
      Type: an, Max Length: 35
    • 7143 – Identification of the type of item number.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – Number assigned by manufacturer or seller to identify the release of a product.
      • AB – Self explanatory.
      • AC – Article identifier used within health sector to indicate data used conforms to HIBC.
      • AD – Number assigned to a cold roll.
      • AE – Number assigned to a hot roll.
      • AF – Number assigned to a slab, which is produced in a particular production step.
      • AG – A number assigned to indicate a revision of software.
      • AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
      • AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
      • AJ – Number assigned to a sample.
      • AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
      • AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
      • AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
      • AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
      • AO – A code which specifies the codification of the state's labelling requirements.
      • AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
      • AQ – A number identifying a coupon.
      • AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.
      • AU – Number assigned under the NATO (North Atlantic Treaty Organization) codification system to provide the identification of an approved item of supply.
      • AV – A code specifying the product refinement designation.

      Showing 20 of 87 values defined for element 7143 in D98A.

    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 135 values defined for element 1131 in D98A.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – EDI Forum for companies with Interest in Computing and Electronics (EDI project for EDP/ADP sector).
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 213 values defined for element 3055 in D98A.

  • C829 – To provide an indication that a segment or segment group is used to contain sub-line or sub-line item information and to optionally enable the sub-line to be identified.
    • 1082 – Serial number designating each separate item within a series of articles.
      Type: an, Max Length: 6
  • 1082 – Serial number designating each separate item within a series of articles.
    Type: an, Max Length: 6
  • 1229 – Code specifying the action to be taken or already taken.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – This line item is added to the referenced message.
    • 2 – This line item is deleted from the referenced message.
    • 3 – This line item is changed in the referenced message.
    • 4 – This line item is not affected by the actual message.
    • 5 – This line item is entirely accepted by the seller.
    • 6 – This line item is accepted but amended by the seller.
    • 7 – This line item is not accepted by the seller.
    • 8 – Self explanatory.
    • 9 – Self explanatory.
    • 10 – This line item is not found in the referenced message.
    • 11 – This line is not amended by the buyer.
    • 12 – Self explanatory.
    • 13 – Buyer has deducted amount from payment.
    • 14 – Buyer has a claim against an outstanding invoice.
    • 15 – Factor has been requested to charge back the outstanding item.
    • 16 – Seller agrees to issue a credit note.
    • 17 – New settlement terms have been agreed.
    • 18 – Factor agrees to abide by the outcome of negotiations between seller and buyer.
    • 19 – Seller does not accept validity of dispute.
    • 20 – The reported situation is settled.

    Showing 20 of 42 values defined for element 1229 in D98A.

  • 1222 – Number indicating the level of an object which is in a hierarchy.
    Type: n, Max Length: 2
  • 7083 – Code indicating the status of the sub-line item in the configuration.
    Type: an, Max Length: 3
    Valid Codes:
    • A – Self explanatory.
    • D – Self explanatory.
    • I – Self explanatory.
PIA To specify additional or substitutional item identification codes. (Max 9)
  • C212 – Goods identification for a specified source.
    • 7140 – A number allocated to a group or item.
      Type: an, Max Length: 35
    • 7143 – Identification of the type of item number.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – Number assigned by manufacturer or seller to identify the release of a product.
      • AB – Self explanatory.
      • AC – Article identifier used within health sector to indicate data used conforms to HIBC.
      • AD – Number assigned to a cold roll.
      • AE – Number assigned to a hot roll.
      • AF – Number assigned to a slab, which is produced in a particular production step.
      • AG – A number assigned to indicate a revision of software.
      • AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
      • AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
      • AJ – Number assigned to a sample.
      • AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
      • AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
      • AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
      • AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
      • AO – A code which specifies the codification of the state's labelling requirements.
      • AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
      • AQ – A number identifying a coupon.
      • AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.
      • AU – Number assigned under the NATO (North Atlantic Treaty Organization) codification system to provide the identification of an approved item of supply.
      • AV – A code specifying the product refinement designation.

      Showing 20 of 87 values defined for element 7143 in D98A.

    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 135 values defined for element 1131 in D98A.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – EDI Forum for companies with Interest in Computing and Electronics (EDI project for EDP/ADP sector).
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 213 values defined for element 3055 in D98A.

  • C212 – Goods identification for a specified source.
    • 7140 – A number allocated to a group or item.
      Type: an, Max Length: 35
    • 7143 – Identification of the type of item number.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – Number assigned by manufacturer or seller to identify the release of a product.
      • AB – Self explanatory.
      • AC – Article identifier used within health sector to indicate data used conforms to HIBC.
      • AD – Number assigned to a cold roll.
      • AE – Number assigned to a hot roll.
      • AF – Number assigned to a slab, which is produced in a particular production step.
      • AG – A number assigned to indicate a revision of software.
      • AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
      • AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
      • AJ – Number assigned to a sample.
      • AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
      • AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
      • AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
      • AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
      • AO – A code which specifies the codification of the state's labelling requirements.
      • AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
      • AQ – A number identifying a coupon.
      • AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.
      • AU – Number assigned under the NATO (North Atlantic Treaty Organization) codification system to provide the identification of an approved item of supply.
      • AV – A code specifying the product refinement designation.

      Showing 20 of 87 values defined for element 7143 in D98A.

    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 135 values defined for element 1131 in D98A.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – EDI Forum for companies with Interest in Computing and Electronics (EDI project for EDP/ADP sector).
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 213 values defined for element 3055 in D98A.

  • C212 – Goods identification for a specified source.
    • 7140 – A number allocated to a group or item.
      Type: an, Max Length: 35
    • 7143 – Identification of the type of item number.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – Number assigned by manufacturer or seller to identify the release of a product.
      • AB – Self explanatory.
      • AC – Article identifier used within health sector to indicate data used conforms to HIBC.
      • AD – Number assigned to a cold roll.
      • AE – Number assigned to a hot roll.
      • AF – Number assigned to a slab, which is produced in a particular production step.
      • AG – A number assigned to indicate a revision of software.
      • AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
      • AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
      • AJ – Number assigned to a sample.
      • AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
      • AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
      • AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
      • AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
      • AO – A code which specifies the codification of the state's labelling requirements.
      • AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
      • AQ – A number identifying a coupon.
      • AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.
      • AU – Number assigned under the NATO (North Atlantic Treaty Organization) codification system to provide the identification of an approved item of supply.
      • AV – A code specifying the product refinement designation.

      Showing 20 of 87 values defined for element 7143 in D98A.

    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 135 values defined for element 1131 in D98A.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – EDI Forum for companies with Interest in Computing and Electronics (EDI project for EDP/ADP sector).
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 213 values defined for element 3055 in D98A.

  • C212 – Goods identification for a specified source.
    • 7140 – A number allocated to a group or item.
      Type: an, Max Length: 35
    • 7143 – Identification of the type of item number.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – Number assigned by manufacturer or seller to identify the release of a product.
      • AB – Self explanatory.
      • AC – Article identifier used within health sector to indicate data used conforms to HIBC.
      • AD – Number assigned to a cold roll.
      • AE – Number assigned to a hot roll.
      • AF – Number assigned to a slab, which is produced in a particular production step.
      • AG – A number assigned to indicate a revision of software.
      • AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
      • AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
      • AJ – Number assigned to a sample.
      • AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
      • AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
      • AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
      • AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
      • AO – A code which specifies the codification of the state's labelling requirements.
      • AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
      • AQ – A number identifying a coupon.
      • AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.
      • AU – Number assigned under the NATO (North Atlantic Treaty Organization) codification system to provide the identification of an approved item of supply.
      • AV – A code specifying the product refinement designation.

      Showing 20 of 87 values defined for element 7143 in D98A.

    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 135 values defined for element 1131 in D98A.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – EDI Forum for companies with Interest in Computing and Electronics (EDI project for EDP/ADP sector).
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 213 values defined for element 3055 in D98A.

  • C212 – Goods identification for a specified source.
    • 7140 – A number allocated to a group or item.
      Type: an, Max Length: 35
    • 7143 – Identification of the type of item number.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – Number assigned by manufacturer or seller to identify the release of a product.
      • AB – Self explanatory.
      • AC – Article identifier used within health sector to indicate data used conforms to HIBC.
      • AD – Number assigned to a cold roll.
      • AE – Number assigned to a hot roll.
      • AF – Number assigned to a slab, which is produced in a particular production step.
      • AG – A number assigned to indicate a revision of software.
      • AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
      • AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
      • AJ – Number assigned to a sample.
      • AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
      • AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
      • AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
      • AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
      • AO – A code which specifies the codification of the state's labelling requirements.
      • AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
      • AQ – A number identifying a coupon.
      • AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.
      • AU – Number assigned under the NATO (North Atlantic Treaty Organization) codification system to provide the identification of an approved item of supply.
      • AV – A code specifying the product refinement designation.

      Showing 20 of 87 values defined for element 7143 in D98A.

    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 135 values defined for element 1131 in D98A.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – EDI Forum for companies with Interest in Computing and Electronics (EDI project for EDP/ADP sector).
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 213 values defined for element 3055 in D98A.

  • 4347 – Indication of the function of the product code.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • 1 – Information which specifies and qualifies product identifications.
    • 2 – The item number describes the potential substitute product.
    • 3 – The given item number is the number of the product that substitutes another one.
    • 4 – The given item number is the number of the original product substituted by another.
    • 5 – Self explanatory.
    • 6 – Product id of the product that will follow the one currently in production/trade.
    • 7 – Product id of the predecessor of the product currently in production/trade.
    • 8 – The given item number is the expired item number of the product. It has been replaced.
    • 9 – Code indicating the deletion of a secondary identification.
IMD To describe an item in either an industry or free format. (Max 9)
  • C272 – To provide the characteristic of the item being described.
    • 7081 – Code specifying the item characteristic being described.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Product in conformity with specifications.
      • 2 – Description of general product form.
      • 3 – Product without quality control when received.
      • 4 – Description of the finish required/available on the product.
      • 5 – Description of what the end use application of the product will be.
      • 8 – Self explanatory.
      • 9 – Description of a sub-product.
      • 10 – Specifies the direction of the grain of the product.
      • 11 – Item characteristic is described following Customs specifications.
      • 12 – Description of the type and/or process involved in making the product. E.g. in steel, description of the steelmaking process.
      • 13 – Self explanatory.
      • 14 – Description of the surface condition (e.g. roughness) of the product.
      • 15 – Description of any heat treatment or annealing required/performed on the product.
      • 17 – Description of any special coating required/available on the product.
      • 18 – Description of any chemical surface treatment required/performed on the product.
      • 19 – Description of any mechanical surface treatment required/performed on the product.
      • 21 – Description of any forming required/performed on the product.
      • 22 – Description of any special edge treatment required/performed on the product.
      • 23 – Description of any special welds and or splices required/performed on the product.
      • 24 – Security relevant product with special quality control and control documentation prescriptions.

      Showing 20 of 159 values defined for element 7081 in D98A.

    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 135 values defined for element 1131 in D98A.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – EDI Forum for companies with Interest in Computing and Electronics (EDI project for EDP/ADP sector).
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 213 values defined for element 3055 in D98A.

  • C273 – Description of an item.
    • 7009 – Code from an industry code list which provides specific data about a product characteristic.
      Type: an, Max Length: 17
    • 1131 – Identification of a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 12 – Self explanatory.
      • 16 – [3251] Code defining postal zones or addresses.
      • 23 – Self explanatory.
      • 25 – Code for identification of banks.
      • 33 – List of codes identifying a commercial and government entity.
      • 34 – A list of attributes regarding policies reinsured with a professional reinsurer.
      • 35 – Self explanatory.
      • 36 – Self explanatory.
      • 37 – Code identifying a location in railway environment.
      • 38 – Self explanatory.
      • 39 – Self explanatory.
      • 40 – Identifies the type of reinsurance amounts.
      • 42 – Self explanatory.
      • 43 – Participants identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 44 – Universal identification of the automated clearing house of the New York Clearing House Association (CHIPS).
      • 45 – A code list adopted by the United Nations organisations for the procurement of goods and services.
      • 46 – An organization identified by the DUNS number and a 4- character extension.
      • 47 – Identifies the class of occupation.
      • 48 – Identification of the policy reserve valuation type.
      • 49 – To indicate the type of life reinsurance activity transmitted in the message.

      Showing 20 of 135 values defined for element 1131 in D98A.

    • 3055 – Code identifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – EDI project for chemical industry.
      • 8 – EDI Forum for companies with Interest in Computing and Electronics (EDI project for EDP/ADP sector).
      • 9 – Self explanatory.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – Self explanatory.
      • 12 – Western and Eastern European railways association (35 networks). UIC with its legal body (CIT) produce codes and reglementations that are internationally recognized and accepted by all European railways and official bodies.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Self explanatory.
      • 20 – Self explanatory.

      Showing 20 of 213 values defined for element 3055 in D98A.

    • 7008 – Plain language description of articles or products.
      Type: an, Max Length: 35
    • 7008 – Plain language description of articles or products.
      Type: an, Max Length: 35
  • 7077 – Code indicating the format of a description.
    Type: an, Max Length: 3
    Valid Codes:
    • A – Long description of an item in free form.
    • B – Self explanatory.
    • C – Self explanatory.
    • D – Price look-up description of a product for point of sale receipts.
    • E – Short description of an item in free form.
    • F – Self explanatory.
    • S – Self explanatory.
    • X – Self explanatory.
  • 7383 – Code indicating the surface or layer of a product that is being described.
    Type: an, Max Length: 3
    Valid Codes:
    • 1S – Self explanatory.
    • 2S – Self explanatory.
    • AA – To indicate that the entity being specified is on the surface.
    • AB – To indicate that the entity being specified is off the surface.
    • AC – Specifies that the surface/layer/position being described is the soluble portion.
    • AD – The surface or layer of the product being described is the opposite corners.
    • AE – The surface or layer of the product being described are the corner diagonals.
    • BC – Self explanatory.
    • BS – Self explanatory.
    • BT – Self explanatory.
    • DF – Self explanatory.
    • FR – Self explanatory.
    • IN – Self explanatory.
    • LE – Self explanatory.
    • OA – Self explanatory.
    • OS – Self explanatory.
    • OT – Self explanatory.
    • RI – Self explanatory.
    • RR – Self explanatory.
    • ST – Self explanatory.

    Showing 20 of 24 values defined for element 7383 in D98A.

PRI To specify price information. (Max 9)
  • C509 – Identification of price type, price and related details.
    • 5125 – Identification of a type of price.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • AAA – The price stated is the net price including allowances/ charges. Allowances/charges may be stated for information only.
      • AAB – The price stated is the gross price to which allowances/ charges must be applied.
      • AAC – The price does not include the allowances and charges, but includes the taxes.
      • AAD – Average selling price of a product.
      • AAE – The price stated is for information purposes only and excludes all allowances and charges. Taxes however are included in the price.
      • AAF – The price stated is for information purposes only and excludes all allowances, charges and taxes.
      • AAG – A code to indicate that the price described is an additive component of the total price.
      • CAL – The price stated is the price for the calculation of the line item amount.
      • INF – The price is provided for information.
      • INV – Referenced price taken from an invoice.
    • 5118 – The monetary value associated with a purchase or sale of an article, product or service.
      Type: n, Max Length: 15
    • 5387 – Code identifying pricing specification.
      Type: an, Max Length: 3
      Valid Codes:
      • AAA – Self explanatory.
      • AAB – Self explanatory.
      • AAC – The suggested retail price as suggested or determined by the party purchasing the goods.
      • AAD – The charges imposed by the ocean transportation industry above and beyond the basic freight.
      • AAE – Not subject to escalation or adjustment.
      • AAF – Subject to increase or development by successive stages.
      • AAG – Self explanatory.
      • AAH – Subject to increase or development by successive stages and price adjustment.
      • AAI – Self explanatory.
      • AAJ – Firm price for specified work.
      • AAK – A price valid from an effective date/time/period.
      • AAL – A price valid prior to an effective date/time/period of a new price.
      • AAM – To indicate that the given price applies per week.
      • AAN – Price can be obtained on request from seller.
      • AAO – The price given is the price of the item without packaging.
      • AAP – Discount price available to all customers except the retail customer.
      • AAQ – Price which will remain unchanged for a given time period.
      • AAR – The per unit cost of referenced material based on a given quotation for that material.
      • AAS – The labour component of the per-unit item price.
      • AAT – The transport component of the per-unit item price.

      Showing 20 of 89 values defined for element 5387 in D98A.

    • 5284 – Basis on which the unit price/rate applies.
      Type: n, Max Length: 9
    • 6411 – Indication of the unit of measurement in which weight (mass), capacity, length, area, volume or other quantity is expressed.
      Type: an, Max Length: 3
  • 5213 – Code indicating disposition of the price change of a sub-line item.
    Type: an, Max Length: 3
    Valid Codes:
    • A – Self explanatory.
    • I – Self explanatory.
    • S – Self explanatory.
NAD To specify the name/address and their related function, either by CO82 only and/or unstructured by CO58 or structured by CO80 thru 3207. (Max 9)

Elements and codes as defined at NAD above.

MOA To specify a monetary amount. (Max 9)
  • C516 – Amount of goods or services stated as a monetary amount in a specified currency.
    • 5025 – Indication of type of amount.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • 1 – First VAT value if, for the same rate of VAT, there are 1 to 3 different ways to set this value.
      • 2 – Second VAT value if, for the same rate of VAT, there are 2 or 3 different ways to set this value.
      • 3 – Third VAT value if, for the same rate of VAT, there are 3 different ways to set this value.
      • 4 – Royalties relating to the imported goods that the buyer must pay, either directly or indirectly, as a condition of sale, to the extent that they are not included in the price actually paid or payable.
      • 5 – The amount specified is the adjusted amount.
      • 6 – The owing amount in the currency used as reference in the transaction.
      • 7 – Charges which parties agreed upon.
      • 8 – [5422] Total amount of allowance or charge.
      • 9 – Amount to be paid.
      • 10 – Indicates that the amount is based on the charged currency.
      • 11 – Self explanatory.
      • 12 – Amount which was remitted (see remittance advice).
      • 13 – Self explanatory.
      • 14 – The amount in the currency in which the amount is paid or has to be paid.
      • 15 – The addition of the balance all accounts divided by the number of accounts.
      • 16 – Self explanatory.
      • 17 – The complete quantity of anything needed for or made in one operation or lot.
      • 18 – Fee charged by a broker for acting on behalf of a third party.
      • 19 – Commission paid by the importer to his/her agent for the service of representing him/her in the purchase.
      • 20 – Value of data contained on the carrier media (e.g. magnetic tape).

      Showing 20 of 381 values defined for element 5025 in D98A.

    • 5004 – Number of monetary units.
      Type: n, Max Length: 35
    • 6343 – Code giving specific meaning to data element 6345 Currency.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – The name or symbol of the monetary unit involved in the transaction for customs valuation.
      • 2 – The name or symbol of the monetary unit involved in the transaction for insurance purposes.
      • 3 – The name or symbol of the local monetary unit.
      • 4 – The name or symbol of the monetary unit used for calculation in an invoice.
      • 5 – The name or symbol of the monetary unit to be converted from.
      • 6 – The name or symbol of the monetary unit to be converted.
      • 7 – The name or symbol of the monetary unit to be converted into.
      • 8 – The name or symbol of the monetary unit used in a price list.
      • 9 – The name or symbol of the monetary unit used in an order.
      • 10 – The name or symbol of the monetary unit used for pricing purposes.
      • 11 – The name or symbol of the monetary unit used for payment.
      • 12 – The name or symbol of the monetary unit used in a quotation.
      • 13 – The name or symbol of the local monetary unit at recipient's location.
      • 14 – The name or symbol of the monetary unit normally used by the supplier.
      • 15 – The name or symbol of the local monetary unit at sender's location.
      • 16 – The currency as per tariff.
      • 17 – The currency in which the charges are calculated.
      • 18 – The currency in which tax amounts are due or have been paid.
Group SG10 (Max 9999) Required
QTY To specify a pertinent quantity. (Max 1) Required
  • C186 – Quantity information in a transaction, qualified when relevant.
    • 6063 – Code giving specific meaning to a quantity.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Quantity relevant for charge.
      • 3 – Self explanatory.
      • 8 – Quantity of goods which the customer requires the supplier to have in inventory and which may be inspected by the customer if desired.
      • 11 – Part of the whole quantity.
      • 12 – Quantity despatched by the seller.
      • 17 – The total quantity of a product on hand at a location. This includes as well units awaiting return to manufacturer, units unavailable due to inspection procedures and undamaged stock available for despatch, resale or use.
      • 18 – Quantity previously referenced.
      • 20 – Self explanatory.
      • 21 – The quantity which has been ordered.
      • 22 – Equivalent quantity at 100% purity.
      • 23 – Quantity at 100% active agent content.
      • 24 – Quantity of goods which the customer requires the supplier to have in inventory but which will not be checked by the customer.
      • 25 – Quantity of retail point of sale activity.
      • 26 – A quantity associated with a promotional event.
      • 27 – Article received which cannot be shipped in its present form.
      • 28 – Quantity of goods or services sold to a military organization.
      • 29 – Sale of product in restaurants or bars.
      • 30 – Sale of product directly to a store.
      • 31 – Self explanatory.

      Showing 20 of 203 values defined for element 6063 in D98A.

    • 6060 – Numeric value of a quantity.
      Type: n, Max Length: 15 (Required)
    • 6411 – Indication of the unit of measurement in which weight (mass), capacity, length, area, volume or other quantity is expressed.
      Type: an, Max Length: 3
DTM To specify date, and/or time, or period. (Max 9)

Elements and codes as defined at DTM above.

Group SG11 (Max 99)
CCI To identify and describe a specific characteristic and its relevance for subsequent business processes. (Max 1) Required

Elements and codes as defined at CCI above.

MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 99)
  • C502 – Identification of measurement type.
    • 6313 – Specification of the property measured.
      Type: an, Max Length: 3
      Valid Codes:
      • A – Description to be provided.
      • AAA – [6160] Weight (mass) of goods including any packing normally going with them to a buyer in a retail sale.
      • AAB – [6292] Weight (mass) of goods including packing but excluding the carrier's equipment.
      • AAC – Self explanatory.
      • AAD – [6292] Weight (mass) of goods including packing but excluding the carrier's equipment.
      • AAE – Gross weight at line item level.
      • AAF – [6048] Weight (mass) of the goods themselves without any packing.
      • AAG – Self explanatory.
      • AAH – Description to be provided.
      • AAI – Measurement reportable for visaed merchandise.
      • AAJ – The number of units contained on a pallet.
      • AAK – An indication of the fat content of a product.
      • AAL – [6160] Weight (mass) of goods including any packing normally going with them to a buyer in a retail sale.
      • AAM – [6300] The measure of the overall size of a ship determined in accordance with the provisions of the International Convention on Tonnage Measurement of Ships, 1969.
      • AAN – [6302] The measure of the useful capacity of a ship determined in accordance with the provisions of the International Convention on Tonnage Measurement of Ships, 1969.
      • AAO – Self-explanatory.
      • AAP – Self-explanatory.
      • AAQ – Value of energy consumption.
      • AAR – Self-explanatory.
      • AAS – Self-explanatory.

      Showing 20 of 236 values defined for element 6313 in D98A.

    • 6321 – Code specifying the significance of a measurement value.
      Type: an, Max Length: 3
      Valid Codes:
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – Self explanatory.
      • 8 – Self explanatory.
      • 10 – Self explanatory.
      • 11 – Description to be provided.
      • 12 – Description to be provided.
      • 13 – Description to be provided.
      • 15 – Self explanatory.
    • 6155 – Code used to specify non-discrete measurement values.
      Type: an, Max Length: 17
      Valid Codes:
      • 1 – Self explanatory.
      • 2 – Self explanatory.
      • 3 – Self explanatory.
      • 4 – Self explanatory.
      • 5 – Self explanatory.
      • 6 – Self explanatory.
      • 7 – Self explanatory.
      • 8 – Self explanatory.
      • 9 – Self explanatory.
      • 10 – Self explanatory.
      • 11 – Self explanatory.
      • 12 – Self explanatory.
      • 13 – Self explanatory.
      • 14 – Self explanatory.
      • 15 – Self explanatory.
      • 16 – Self explanatory.
      • 18 – Self explanatory.
      • 19 – Self explanatory.
      • 20 – Self explanatory.
      • 21 – Self explanatory.

      Showing 20 of 42 values defined for element 6155 in D98A.

    • 6154 – To specify non-discrete measurement values.
      Type: an, Max Length: 70
  • C174 – Measurement value and relevant minimum and maximum values of the measurement range.
    • 6411 – Indication of the unit of measurement in which weight (mass), capacity, length, area, volume or other quantity is expressed.
      Type: an, Max Length: 3 (Required)
    • 6314 – Value of the measured unit.
      Type: an, Max Length: 18
    • 6162 – Minimum of a range.
      Type: n, Max Length: 18
    • 6152 – Maximum of a range.
      Type: n, Max Length: 18
    • 6432 – To specify the number of significant digits.
      Type: n, Max Length: 2
  • 6311 – Specification of the purpose of the measurement.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • AAA – Line item measurement specified by the Food and Drug Administration.
    • AAC – Size of a retail container in terms of volume.
    • AAD – Description to be provided.
    • AAE – [6314] Value of the measured unit.
    • AAF – The measurement of a consignment or part for customs purpose.
    • AAG – The measurement of the percentage of alcohol by volume.
    • AAH – Description to be provided.
    • AAI – Weight at line item level.
    • AAJ – Measurement reportable for visaed merchandise.
    • AAK – Quantity to be written off from the total license amount.
    • AAL – Total tonnage of cargo loaded onto the conveyance.
    • AAM – Total tonnage of cargo unloaded from the conveyance.
    • AAN – Tonnage of conveyance.
    • AAO – Registered summer dead weight total tonnage of the vessel.
    • AAP – Total weight of containerized cargo on vessel.
    • AAQ – Total weight of non-containerized cargo on vessel.
    • AAR – Primary reportable quantity associated with a tariff number.
    • AAS – Secondary reportable quantity associated with a tariff number.
    • AAT – Third reportable quantity associated with a tariff number.
    • AAU – Commodity/product shipped or sold in discrete individual containers which may be accumulated in a larger package.

    Showing 20 of 86 values defined for element 6311 in D98A.

  • 7383 – Code indicating the surface or layer of a product that is being described.
    Type: an, Max Length: 3
    Valid Codes:
    • 1S – Self explanatory.
    • 2S – Self explanatory.
    • AA – To indicate that the entity being specified is on the surface.
    • AB – To indicate that the entity being specified is off the surface.
    • AC – Specifies that the surface/layer/position being described is the soluble portion.
    • AD – The surface or layer of the product being described is the opposite corners.
    • AE – The surface or layer of the product being described are the corner diagonals.
    • BC – Self explanatory.
    • BS – Self explanatory.
    • BT – Self explanatory.
    • DF – Self explanatory.
    • FR – Self explanatory.
    • IN – Self explanatory.
    • LE – Self explanatory.
    • OA – Self explanatory.
    • OS – Self explanatory.
    • OT – Self explanatory.
    • RI – Self explanatory.
    • RR – Self explanatory.
    • ST – Self explanatory.

    Showing 20 of 24 values defined for element 7383 in D98A.

DTM To specify date, and/or time, or period. (Max 9)

Elements and codes as defined at DTM above.

CNT To provide control total. (Max 99)
  • C270 – Control total for checking integrity of a message or part of a message.
    • 6069 – Determines the source data elements in the message which forms the basis for 6066 Control value.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • 1 – Self-explanatory.
      • 2 – Self-explanatory.
      • 3 – Description to be provided.
      • 4 – Number of lines on an invoice.
      • 5 – Total number of occurrences of the Customs item detail section within a single Customs declaration message.
      • 6 – Number of entries which are subject to the same Customs procedures, and have the same tariff or statistical heading, country and duty regime.
      • 7 – Code to indicate total gross weight of a consignment.
      • 8 – Self explanatory.
      • 9 – The total number of Unit Load Devices mentioned in the message.
      • 10 – The total number of consignments.
      • 11 – [7370] Total number of packages of the entire consignment.
      • 12 – [5444] Total sum charged in respect of one or more Invoices in accordance with the terms of delivery.
      • 13 – [1166] Number of loading lists, manifests or other similar specifications attached to a document.
      • 14 – Commercial detail section within a single Customs declaration message.
      • 15 – The total cube of consignment.
      • 16 – Total number of equipment mentioned in the message.
      • 17 – [5070] Total value declared for Customs purposes of all goods in a consignment, whether or not they are subject to the same Customs procedure, or have the same tariff/statistical heading, country information, and duty regime.
      • 18 – Total reported quantity in net weight.
      • 19 – Total reported quantity in supplementary units.
      • 20 – Hash total of the total monetary amounts reported on the invoices.

      Showing 20 of 42 values defined for element 6069 in D98A.

    • 6066 – Value obtained from summing the values specified by the Control Qualifier throughout the message (Hash total).
      Type: n, Max Length: 18 (Required)
    • 6411 – Indication of the unit of measurement in which weight (mass), capacity, length, area, volume or other quantity is expressed.
      Type: an, Max Length: 3
UNT Unknown Segment (Max 1) Required

Sources and further reading