Try it now Login

UN/EDIFACT D17A CASINT Message

Review the CASINT segment sequence, mandatory fields, repeat counts and valid codes for the D17A EDIFACT directory.

Jump to Segment
UNH
BGM
DTM
LOC
RFF
ATT
FTX
NAD
LOC
MOA
DTM
FCA
UNS
NAD
SEQ
LOC
CTA
COM
RFF
ATT
PRC
MEA
DTM
EMP
FTX
DOC
GIR
PYT
DTM
FTX
NAD
LOC
MOA
DTM
FCA
UNT
UNH Unknown Segment (Max 1) Required
BGM To indicate the type and function of a message and to transmit the identifying number. (Max 1) Required
  • C002 – Identification of a type of document/message by code or name. Code preferred.
    • 1001 – Code specifying the document name.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Certificate providing the values of an analysis.
      • 2 – Certificate certifying the conformity to predefined definitions.
      • 3 – Certificate certifying the quality of goods, services etc.
      • 4 – Report providing the results of a test session.
      • 5 – Report specifying the performance values of products.
      • 6 – Report providing specification values of products.
      • 7 – Reports on events during production process.
      • 8 – Document/message describes the test report of the first sample.
      • 9 – A document/message to enable the transmission of information regarding pricing and catalogue details for goods and services offered by a seller to a buyer.
      • 10 – Document/message providing basic data concerning a party.
      • 11 – A pre-approved document relating to federal label approval requirements.
      • 12 – Certificate certifying a specific quality of agricultural products.
      • 13 – Document/message which evidences the transport of goods by post (e.g. mail, parcel, etc.).
      • 14 – Certificate certifying the weight of goods.
      • 15 – Document/message specifying the weight of goods.
      • 16 – Document by means of which the documentary credit applicant specifies the conditions for the certificate and by whom the certificate is to be issued.
      • 17 – Document identifying goods in which the issuing authority expressly certifies that the goods originate in a specific country or part of, or group of countries. It also states the price and/or cost of the goods with the purpose of determining the customs origin.
      • 18 – Specific form of transit declaration issued by the exporter (movement certificate).
      • 19 – Certificate certifying the quantity of goods, services etc.
      • 20 – Usage of QALITY-message.

      Showing 20 of 727 values defined for element 1001 in D17A.

    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 409 values defined for element 3055 in D17A.

    • 1000 – Name of a document.
      Type: an, Max Length: 35
  • C106 – Identification of a document/message by its number and eventually its version or revision.
    • 1004 – To identify a document.
      Type: an, Max Length: 70
    • 1056 – To identify a version.
      Type: an, Max Length: 9
    • 1060 – To identify a revision.
      Type: an, Max Length: 6
  • 1225 – Code indicating the function of the message.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – Message cancelling a previous transmission for a given transaction.
    • 2 – Message containing items to be added.
    • 3 – Message containing items to be deleted.
    • 4 – Message containing items to be changed.
    • 5 – Message replacing a previous message.
    • 6 – Message confirming the details of a previous transmission where such confirmation is required or recommended under the terms of a trading partner agreement.
    • 7 – The message is a duplicate of a previously generated message.
    • 8 – Code indicating that the referenced message is a status.
    • 9 – Initial transmission related to a given transaction.
    • 10 – Message whose reference number is not filed.
    • 11 – Message responding to a previous message or document.
    • 12 – Message indicating that the referenced message was received but not yet processed.
    • 13 – Code indicating that the referenced message is a request.
    • 14 – Code indicating that the information contained in the message is an advance notification of information to follow.
    • 15 – Repeated message transmission for reminding purposes.
    • 16 – Message content is a proposal.
    • 17 – Referenced transaction cancelled, reissued message will follow.
    • 18 – New issue of a previous message (maybe cancelled).
    • 19 – Change information submitted by buyer but initiated by seller.
    • 20 – Message to replace the heading of a previous message.

    Showing 20 of 69 values defined for element 1225 in D17A.

  • 4343 – Code specifying the type of acknowledgment required or transmitted.
    Type: an, Max Length: 3
    Valid Codes:
    • AA – Receiver of the payment message needs to return a debit advice in response to the payment message.
    • AB – Indicates that an acknowledgement relating to receipt of message is required.
    • AC – Acknowledge complete including changes.
    • AD – Acknowledge complete without changes.
    • AE – A debit advice is requested for each transaction in the message.
    • AF – The sender wishes to receive both a Debit Advice and an acknowledgement of receipt for a payment message.
    • AG – Authentication, by a party, of a document established for him by another party.
    • AH – A debit advice and message acknowledgement are requested for each transaction in the message.
    • AI – Acknowledgement of changes only is required.
    • AJ – Indication that the referenced offer or transaction (e.g. cargo booking or quotation request) is being dealt with.
    • AK – The sender of the message expects only TIR (Transports Internationaux Routiers) transport information in return.
    • AL – Desc The sender of the message expects only declaration information in return.
    • AM – The sender of the message expects only guarantee information in return.
    • AN – The sender of the message expects all information regarding the guarantee in return.
    • AP – Indication that the referenced offer or transaction (e.g., cargo booking or quotation request) has been accepted.
    • AQ – The sender of the message expects a response.
    • AR – Documentary credit collection forwarded directly.
    • AS – The receiver of the message is to acknowledge receipt of the message and sent a credit advice for each credit.
    • CA – Indication that the referenced offer or transaction (e.g., cargo booking or quotation request) has been accepted under conditions indicated in this message.
    • CO – Indication that the message contains the physical measurements on which the charges will be based.

    Showing 20 of 27 values defined for element 4343 in D17A.

  • 1373 – Code specifying the status of a document.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – The specified document is accepted.
    • 2 – Notice that a specific document will be accompanying the goods.
    • 3 – The specified document is conditionally accepted.
    • 4 – Notice that a specific document/message will be transmitted via a separate EDI message.
    • 5 – Notice that the specific document or message is for information only.
    • 6 – Notice that a specific document or message will not be sent via EDI.
    • 7 – Request for a specific message to be formatted and transmitted or a request for a specific document to be raised and sent.
    • 8 – The specified document is rejected.
    • 9 – The document or message is to be printed.
    • 10 – Specific document is currently valid.
    • 11 – Specified document is not available.
    • 12 – Customs declaration to which the document is related completed or exhaust the allowance stated on the document. The document is attached to the Customs declaration.
    • 13 – Customs declaration to which the document is related does not complete or exhaust the allowance stated on the document . The document is not attached to the declaration but has already been lodged in the Customs station.
    • 14 – Customs declaration to which the document is related completed or exhaust the allowance stated on the document. The usage of the document is complete. The document is not attached to the declaration but has already been lodged in the Customs station.
    • 15 – Customs declaration to which the document is related does not complete or exhaust the allowance stated on the document. The document can continue to be used for future declarations until the allowance is exhausted. The document is not attached to the declaration but has already been lodged in the Customs station.
    • 16 – Specified document is not or cannot be attached.
    • 17 – Document not attached to the Customs declaration but is attached to the goods.
    • 18 – Specified document is attached to the Customs declaration and will be required to be returned to the declarant after Customs endorsement.
    • 19 – Application has been submitted for that document.
    • 20 – Indicates that the document has legal validity from the date of receival of the cargo.

    Showing 20 of 39 values defined for element 1373 in D17A.

  • 3453 – Code specifying the language name.
    Type: an, Max Length: 3
DTM To specify date, and/or time, or period. (Max 9)
  • C507 – Date and/or time, or period relevant to the specified date/time/period type.
    • 2005 – Code qualifying the function of a date, time or period.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • 1 – Actual date/time on which the service was completed.
      • 2 – (2105) Date on which buyer requests goods to be delivered.
      • 3 – [2377] Date of issue of an invoice.
      • 4 – [2011] Date of order.
      • 5 – A period of time when saleable stocks are expected to cover demand for a product.
      • 6 – The date an entity moved from a location.
      • 7 – (2069) Date and/or time at which specified event or document becomes effective.
      • 8 – Date/time when the purchase order is received by the seller.
      • 9 – Date/time of processing.
      • 10 – Date on which goods should be shipped or despatched by the supplier.
      • 11 – [2171] Date/time on which the goods are or are expected to be despatched or shipped.
      • 12 – Date by which payment should be made if discount terms are to apply.
      • 13 – Date by which payment must be made.
      • 14 – Date/time when instalments are due.
      • 15 – Date/time when promotion activities begin.
      • 16 – Date/time when promotion activities end.
      • 17 – (2109) Date and/or time when the shipper of the goods expects delivery will take place.
      • 18 – The date/time/period of the act, or an instance of installing something or someone.
      • 19 – Period of time between slaughter and delivery during which meat is ageing.
      • 20 – Date/time when cheque is issued.

      Showing 20 of 805 values defined for element 2005 in D17A.

    • 2380 – The value of a date, a date and time, a time or of a period in a specified representation.
      Type: an, Max Length: 35
    • 2379 – Code specifying the representation of a date, time or period.
      Type: an, Max Length: 3
      Valid Codes:
      • 2 – Calendar date: D = Day; M = Month; Y = Year.
      • 3 – Calendar date: M = Month; D = Day; Y = Year.
      • 4 – Calendar date C=Century; Y=Year; M=Month; D=Day.
      • 5 – Calendar date and time: C=Century; Y=Year; M=Month; D=Day; H=Hour; M=Minute.
      • 6 – Half-month: CC=century YY=year MM=month, B=1:first half month, B=2:second half month.
      • 7 – Week within a calendar month: CC=century YY=year MM=month. W=1-5 first week to fifth week in a month.
      • 8 – Shift within a calendar day: CC=century YY=year MM=month DD=day S=1-9 shift in a day.
      • 9 – Time period within a calendar day: CC=century YY=year MM=month DD=day PP=00-99 time period.
      • 10 – Calendar date including time with minutes: C=Century; Y=Year; M=Month; D=Day; T=Time designator; H=Hour; M=Minutes. The character [T] shall be used as time designator to indicate the start of the representation of the time. For example: 20010912T1433.
      • 101 – Calendar date: Y = Year; M = Month; D = Day.
      • 102 – Calendar date: C = Century ; Y = Year ; M = Month ; D = Day.
      • 103 – Calendar week day: Y = Year ; W = Week ; D = Day Week number 01 is always first week of January Day number 1 is always Monday.
      • 104 – A period of time specified by giving the start week of a month followed by the end week of a month. Data is to be transmitted as consecutive characters without hyphen.
      • 105 – Calendar day: Y = Year ; D = Day January the first = Day 001 Always start numbering the days of the year from January 1st through December 31st.
      • 106 – Day of a month: M = Month; D = Day.
      • 107 – Day's number within a specific year: D = Day.
      • 108 – Week's number within a specific year: W = Week.
      • 109 – Month's number within a specific year: M = Month.
      • 110 – Day's number within is a specific month: D = Day.
      • 201 – Calendar date including time without seconds: Y = Year; M = Month; D = Day; H = Hour; M = Minute.

      Showing 20 of 87 values defined for element 2379 in D17A.

LOC To identify a place or a location and/or related locations. (Max 9)
  • C517 – Identification of a location by code or name.
    • 3225 – To identify a location.
      Type: an, Max Length: 35
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 409 values defined for element 3055 in D17A.

    • 3224 – Name of the location.
      Type: an, Max Length: 256
  • C519 – Identification the first related location by code or name.
    • 3223 – To identify a first related location.
      Type: an, Max Length: 35
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 409 values defined for element 3055 in D17A.

    • 3222 – Name of first related location.
      Type: an, Max Length: 70
  • C553 – Identification of second related location by code or name.
    • 3233 – To identify a second related location.
      Type: an, Max Length: 35
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 409 values defined for element 3055 in D17A.

    • 3232 – Name of the second related location.
      Type: an, Max Length: 70
  • 3227 – Code identifying the function of a location.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • 1 – (3018) Point or port of departure, shipment or destination, as required under the applicable terms of delivery, e.g. Incoterms.
    • 2 – [3109] To identify the place where the payment has been or should be made.
    • 3 – Place where equipment tare has been or must be checked for official assessment.
    • 4 – [3160] Place at which the goods have been received.
    • 5 – (3214) Port, airport or other location from which a means of transport or transport equipment is scheduled to depart or has departed.
    • 6 – A bed in a ward.
    • 7 – (3246) Place to which the goods are to be finally delivered under transport contract terms (operational term).
    • 8 – (3258) Port, airport or other location to which a means of transport or transport equipment is destined.
    • 9 – [3334] Seaport, airport, freight terminal, rail station or other place at which the goods (cargo) are loaded on to the means of transport being used for their carriage.
    • 10 – [3348] Place where the goods are taken over by the carrier.
    • 11 – [3392] Seaport, airport, freight terminal, rail station or other place at which goods are unloaded from the means of transport having been used for their carriage.
    • 12 – Port at which the goods are discharged from the vessel used for their transport.
    • 13 – [3424] Place where goods are to be or have been transferred from one means of transport to another during the course of one transport operation.
    • 14 – [3385] To identify the place where a goods item is located.
    • 15 – Place where the responsibility is transferred.
    • 16 – Place where the ownership of the goods is transferred.
    • 17 – Place where goods are transported across a country border.
    • 18 – [3156] Warehouse where a particular consignment is to be or has been stored.
    • 19 – Factory/plant relevant for a particular consignment.
    • 20 – Place where goods will ultimately be delivered.

    Showing 20 of 304 values defined for element 3227 in D17A.

  • 5479 – Code specifying a relation.
    Type: an, Max Length: 3
RFF To specify a reference. (Max 9)
  • C506 – Identification of a reference.
    • 1153 – Code qualifying a reference.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • AAA – [1018] Reference number identifying the acknowledgement of an order.
      • AAB – [1088] Reference number to identify a proforma invoice.
      • AAC – [1172] Reference number to identify a documentary credit.
      • AAD – [1318] Reference number to identify an addendum to a contract.
      • AAE – Reference number assigned to a goods declaration.
      • AAF – A reference number identifying a debit card.
      • AAG – (1332) Reference number assigned by issuing party to an offer.
      • AAH – Reference number allocated by the bank to a batch of different underlying interbank transactions.
      • AAI – Reference number allocated by the bank to one specific interbank transaction.
      • AAJ – Reference number assigned by issuer to a delivery order.
      • AAK – [1035] Reference number assigned by issuing party to a despatch advice.
      • AAL – Reference number identifying a specific product drawing.
      • AAM – Reference number assigned to a waybill, see: 1001 = 700.
      • AAN – Reference number assigned by buyer to a delivery schedule.
      • AAO – [1362] Reference number assigned by the consignee to identify a particular consignment.
      • AAP – [1310] Identifier of a shipment which is part of an order.
      • AAQ – [8260] To identify a piece if transport equipment e.g. container or unit load device.
      • AAR – A reference number assigned by a municipality to identify a business.
      • AAS – [1188] Reference number to identify a document evidencing a transport contract.
      • AAT – Identifies the master label number of any package type.

      Showing 20 of 814 values defined for element 1153 in D17A.

    • 1154 – Identifies a reference.
      Type: an, Max Length: 70
    • 1156 – To identify a line of a document.
      Type: an, Max Length: 6
    • 1056 – To identify a version.
      Type: an, Max Length: 9
    • 1060 – To identify a revision.
      Type: an, Max Length: 6
ATT To identify a specific attribute. (Max 9)
  • C955 – Identification of the type of attribute.
    • 9021 – Coded specifying an attribute type.
      Type: an, Max Length: 17
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 409 values defined for element 3055 in D17A.

    • 9020 – Free form description of an attribute type.
      Type: an, Max Length: 70
  • C956 – Identification of the attribute related to an entity.
    • 9019 – Code specifying an attribute.
      Type: an, Max Length: 17
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 409 values defined for element 3055 in D17A.

    • 9018 – Free form description of an attribute.
      Type: an, Max Length: 256
  • 9017 – Code qualifying an attribute function.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • 1 – Attribute refers to a member of a group of persons or a service scheme.
    • 2 – Attribute refers to a person.
    • 3 – A structure component of an array.
    • 4 – Attribute to specify an academic title.
    • 5 – Attribute to specify professional title.
    • 6 – Attribute to specify a personal title.
    • 7 – Attribute refers to a directory set definition.
    • 8 – The attribute refers to an object in a structure.
    • 9 – Identifying attributes related to an account.
    • 10 – Identifies the attributes related to a financial statement.
    • 11 – To provide information regarding the manner of payment.
    • 12 – To specify information applicable to a loan.
    • 13 – To identify the contract attributes.
    • 14 – To identify funding attributes.
    • 15 – To identify the attributes for the acquisition phases of a product or service.
    • 16 – To identify the attributes of money set aside to accomplish a task.
    • 17 – Attribute relates to a laboratory investigation.
    • 18 – Attribute relates to a clinical investigation.
    • 19 – Attribute relates to a reason for a request.
    • 20 – Attribute relates to the reason for a prescription.

    Showing 20 of 27 values defined for element 9017 in D17A.

FTX To provide free form or coded text information. (Max 9)
  • C107 – Coded reference to a standard text and its source.
    • 4441 – Code specifying free form text.
      Type: an, Max Length: 17 (Required)
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 409 values defined for element 3055 in D17A.

  • C108 – Free text; one to five lines.
    • 4440 – Free form text.
      Type: an, Max Length: 512 (Required)
    • 4440 – Free form text.
      Type: an, Max Length: 512
    • 4440 – Free form text.
      Type: an, Max Length: 512
    • 4440 – Free form text.
      Type: an, Max Length: 512
    • 4440 – Free form text.
      Type: an, Max Length: 512
  • 4451 – Code qualifying the subject of the text.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • AAA – [7002] Plain language description of the nature of a goods item sufficient to identify it for customs, statistical or transport purposes.
    • AAB – [4276] Free form description of the conditions of payment between the parties to a transaction.
    • AAC – [7488] Additional information concerning dangerous substances and/or article in a consignment.
    • AAD – [7254] Proper shipping name, supplemented as necessary with the correct technical name, by which a dangerous substance or article may be correctly identified, or which is sufficiently informative to permit identification by reference to generally available literature.
    • AAE – The content of an acknowledgement.
    • AAF – Specific details applying to rates.
    • AAG – Indicates that the segment contains instructions to be passed on to the identified party.
    • AAI – The text contains general information.
    • AAJ – Additional conditions specific to this order or project.
    • AAK – Information on the price conditions that are expected or given.
    • AAL – Expression of a number in characters as length of ten meters.
    • AAM – Technical or commercial reasons why a piece of equipment may not be re-used after the current transport terminates.
    • AAN – Restrictions in handling depending on the technical characteristics of the piece of equipment or on the nature of the goods.
    • AAO – Error described by a free text.
    • AAP – Free text of the response to a communication.
    • AAQ – A description of the contents of a package.
    • AAR – (4053) Free text of the non Incoterms terms of delivery. For Incoterms, use: 4053.
    • AAS – The remarks printed or to be printed on a bill of lading.
    • AAT – Free text information on an IATA Air Waybill to indicate means by which account is to be settled.
    • AAU – Information pertaining to the invoice covering the consignment.

    Showing 20 of 381 values defined for element 4451 in D17A.

  • 4453 – Code specifying the function of free text.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – The occurrence of this text does not affect message processing.
    • 2 – Text description of a coded data item for which there is no currently available code.
    • 3 – Text must be read before actioning message.
    • 4 – Pass text on to later recipient.
    • 5 – Indicates that the text is to be taken as a header.
    • 6 – Indicates that the text starts a new numbered paragraph.
    • 7 – Indicates that the text is a paragraph.
  • 3453 – Code specifying the language name.
    Type: an, Max Length: 3
  • 4447 – Code specifying the format of free text.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – The associated text is centred in the available space.
    • 2 – The associated text item is aligned flush left in the available space.
    • 3 – The associated text is aligned flush right in the available space.
    • 4 – The associated text is justified in the available space.
    • 5 – The text is to be preceded by one blank line.
    • 6 – The text is to be preceded by two blank lines.
    • 7 – The text is to be preceded by three blank lines.
    • 8 – The text is a continuation of preceding text.
    • 9 – The text is to begin on a new page.
    • 10 – The text is the final section of the preceding text.
    • 11 – The text is to begin a new line.
Group SG1 (Max 1)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
  • C082 – Identification of a transaction party by code.
    • 3039 – Code specifying the identity of a party.
      Type: an, Max Length: 35 (Required)
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 409 values defined for element 3055 in D17A.

  • C058 – Unstructured name and address: one to five lines.
    • 3124 – Free form description of a name and address line.
      Type: an, Max Length: 35 (Required)
    • 3124 – Free form description of a name and address line.
      Type: an, Max Length: 35
    • 3124 – Free form description of a name and address line.
      Type: an, Max Length: 35
    • 3124 – Free form description of a name and address line.
      Type: an, Max Length: 35
    • 3124 – Free form description of a name and address line.
      Type: an, Max Length: 35
  • C080 – Identification of a transaction party by name, one to five lines. Party name may be formatted.
    • 3036 – Name of a party.
      Type: an, Max Length: 70 (Required)
    • 3036 – Name of a party.
      Type: an, Max Length: 70
    • 3036 – Name of a party.
      Type: an, Max Length: 70
    • 3036 – Name of a party.
      Type: an, Max Length: 70
    • 3036 – Name of a party.
      Type: an, Max Length: 70
    • 3045 – Code specifying the representation of a party name.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Name component 1: Family name. Name component 2: Given name or initials. Name component 3: Given name or initials. Name component 4: Maiden name. Name component 5: Title Group of name components transmitted in sequence with name component 1 transmitted first. The maiden name is the family name given at birth of a female. Other names are self-explanatory.
      • 2 – Name component 1: paternal name; name component 2: maternal name; name component 3: given name or initial(s); name component 4: middle name or initial(s); name component 5: name suffix.
      • 3 – Name component 1: Qualification Name component 2: First part of the name Name component 3: Second part of the name.
  • C059 – Street address and/or PO Box number in a structured address: one to four lines.
    • 3042 – To identify a street and number and/or Post Office box number.
      Type: an, Max Length: 256 (Required)
    • 3042 – To identify a street and number and/or Post Office box number.
      Type: an, Max Length: 256
    • 3042 – To identify a street and number and/or Post Office box number.
      Type: an, Max Length: 256
    • 3042 – To identify a street and number and/or Post Office box number.
      Type: an, Max Length: 256
  • C819 – To specify a country subdivision, such as state, canton, county, prefecture.
    • 3229 – To identify a country subdivision, such as state, canton, county, prefecture.
      Type: an, Max Length: 9
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 409 values defined for element 3055 in D17A.

    • 3228 – Name of a country subdivision, such as state, canton, county, prefecture.
      Type: an, Max Length: 70
  • 3035 – Code giving specific meaning to a party.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • AA – Party to be billed in accordance with AAR Accounting rule 11.
    • AB – Third party who arranged the purchase of merchandise on behalf of the actual buyer.
    • AE – Any natural or legal person who makes a declaration to an official body on behalf of another natural or legal person, where legally permitted (CCC).
    • AF – Natural or legal person responsible for the satisfactory performance of a Customs transit operation. Source: CCC.
    • AG – (3196) Party authorized to act on behalf of another party. Synonym: Representative.
    • AH – Agent acting on behalf of the transit principal (CCC).
    • AI – Person who has been chosen for a job.
    • AJ – The party which has issued all mutually agreed codes used in the message.
    • AK – Party to whom acknowledgement should be sent.
    • AL – (3340) Party accepting liability for goods held or moving (e.g. transit) under a Customs authorization and - when applicable - a guarantee.
    • AM – Employee of a company or firm authorized to act on behalf of that company or firm e.g. to make a Customs declaration.
    • AN – Person or company which is authorised by the relevant Customs authority to import goods without payment all taxes or specific taxes at the point of entry into the country.
    • AO – Party account is assigned to.
    • AP – (3336) Party accepting goods, products, services, etc.
    • AQ – Person or company approved by the relevant authority in the country to pack and export specific goods under Customs supervision.
    • AR – Exporter authorized/approved by Customs for special Customs procedures e.g. simplified procedure.
    • AS – Identifies the financial institution servicing the account(s).
    • AT – Importer authorized/approved by Customs for special Customs procedures e.g. simplified procedure.
    • AU – Trader authorized/approved by Customs for special transit procedures e.g. simplified procedure.
    • AV – Party that has delegated the authority to take a certain action on behalf of a company or agency.

    Showing 20 of 605 values defined for element 3035 in D17A.

  • 3164 – Name of a city.
    Type: an, Max Length: 35
  • 3251 – Code specifying the postal zone or address.
    Type: an, Max Length: 17
  • 3207 – Identification of the name of the country or other geographical entity as defined in ISO 3166-1 and UN/ECE Recommendation 3.
    Type: an, Max Length: 3
LOC To identify a place or a location and/or related locations. (Max 9)

Elements and codes as defined at LOC above.

Group SG2 (Max 99)
MOA To specify a monetary amount. (Max 1) Required
  • C516 – Amount of goods or services stated as a monetary amount in a specified currency.
    • 5025 – Code qualifying the type of monetary amount.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • 1 – First VAT value if, for the same rate of VAT, there are 1 to 3 different ways to set this value.
      • 2 – Second VAT value if, for the same rate of VAT, there are 2 or 3 different ways to set this value.
      • 3 – Third VAT value if, for the same rate of VAT, there are 3 different ways to set this value.
      • 4 – Royalties relating to the imported goods that the buyer must pay, either directly or indirectly, as a condition of sale, to the extent that they are not included in the price actually paid or payable.
      • 5 – The amount specified is the adjusted amount.
      • 6 – The owing amount in the currency used as reference in the transaction.
      • 7 – Charges which parties agreed upon.
      • 8 – Total amount of allowance or charge.
      • 9 – Amount to be paid.
      • 10 – Indicates that the amount is based on the charged currency.
      • 11 – Amount that has been paid.
      • 12 – Amount which was remitted (see remittance advice).
      • 13 – The amount is subject to a total monetary discount.
      • 14 – The amount in the currency in which the amount is paid or has to be paid.
      • 15 – The addition of the balance all accounts divided by the number of accounts.
      • 16 – The fee that a bank charges for releasing monies.
      • 17 – The complete quantity of anything needed for or made in one operation or lot.
      • 18 – Fee charged by a broker for acting on behalf of a third party.
      • 19 – Commission paid by the importer to his/her agent for the service of representing him/her in the purchase.
      • 20 – Value of data contained on the carrier media (e.g. magnetic tape).

      Showing 20 of 549 values defined for element 5025 in D17A.

    • 5004 – To specify a monetary amount.
      Type: n, Max Length: 35
    • 6345 – Code specifying a monetary unit.
      Type: an, Max Length: 3
    • 6343 – Code qualifying the type of currency.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – The currency of the monetary unit involved in the transaction for customs valuation.
      • 2 – The currency of the monetary unit involved in the transaction for insurance purposes.
      • 3 – The currency of the local monetary unit.
      • 4 – The currency of the monetary unit used for calculation in an invoice.
      • 5 – The currency of the monetary unit of an account.
      • 6 – The currency of the monetary unit to be converted from.
      • 7 – The currency of the monetary unit to be converted into.
      • 8 – The currency of the monetary unit used in a price list.
      • 9 – The currency of the monetary unit used in an order.
      • 10 – [5077] The currency of the monetary unit used for pricing purposes.
      • 11 – The currency of the monetary unit used for payment.
      • 12 – The currency of the monetary unit used in a quotation.
      • 13 – The currency of the local monetary unit at recipient's location.
      • 14 – The currency of the monetary unit normally used by the supplier.
      • 15 – The currency of the local monetary unit at sender's location.
      • 16 – The currency as per tariff.
      • 17 – The currency in which the charges are calculated.
      • 18 – The currency in which tax amounts are due or have been paid.
    • 4405 – Code specifying a status.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Remark that the requested service in the order remains outstanding.
      • 2 – The instruction has been completed.
      • 3 – The information has been passed on.
      • 4 – The amount has the status of finality.
      • 5 – The amount is subject to finality.
      • 6 – The amount quoted is a minimum tariff.
      • 7 – The amount quoted is a fixed tariff.
      • 8 – The amount quoted is a maximum tariff.
      • 9 – The amount is quoted for information only, it is not part of the charges to be deducted or added.
      • 10 – The amount is available today.
      • 11 – The amount is available on the next banking office day after the booking date.
      • 12 – The amount is available on the second banking office day after the booking date.
      • 13 – The amount available on the third banking office day after the booking date.
      • 14 – Funds not collected by beneficiary.
      • 15 – The amount or quantity is zero.
      • 16 – No status or condition has been advised.
      • 17 – A status or condition has been requested.
      • 18 – No charge is to be made.
      • 19 – The quantity has been the subject of a rounding operation.
      • 20 – Intended to last or function indefinitely.

      Showing 20 of 146 values defined for element 4405 in D17A.

DTM To specify date, and/or time, or period. (Max 1)

Elements and codes as defined at DTM above.

FCA Description of allocation of charges. (Max 1)
  • C878 – Identification of the account for charge or allowance.
    • 3434 – To identify a branch of an institution.
      Type: an, Max Length: 17 (Required)
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 409 values defined for element 3055 in D17A.

    • 3194 – To identify the holder of an account.
      Type: an, Max Length: 35
    • 6345 – Code specifying a monetary unit.
      Type: an, Max Length: 3
  • 4471 – Code specifying the means of settlement.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • 1 – Refers to a charge or allowance for the buyer and the buyer will bill back the seller.
    • 2 – The allowance or charge is being deducted from the invoice.
    • 3 – An allowance will be given to a customer from the supplier in the form of a check.
    • 4 – An allowance will be processed for the customer by giving a credit to their account.
    • 5 – A charge whose payment will be made by the vendor.
    • 6 – A charge whose payment will be made by the customer.
    • 7 – The settlement of charges is not obligatory.
    • 8 – Allowance as relates to the gross quantity invoiced.
    • 9 – An allowance as it relates to the electric cost recovery factor.
    • 10 – An allowance as it relates to the gas cost recovery factor.
    • 11 – A settlement was made using a previous credit balance.
    • 12 – Reference to an allowance or charge as being free for Customs duty computation purposes.
    • 13 – All charges are to be borne by the funds receiver.
    • 14 – Each party are to be responsible for its own charges.
    • 15 – All charges are to be borne by the funds sender.
    • 16 – All bank charges associated with a documentary credit are to be borne by the applicant.
    • 17 – All bank charges associated with a documentary credit except confirmation commission are to borne by the applicant.
    • 18 – All bank charges associated with a documentary credit are to be borne by the beneficiary.
    • 19 – The total payment is borne by the project.
    • 20 – Documentary credit amendment charges are to be borne by the applicant.

    Showing 20 of 40 values defined for element 4471 in D17A.

UNS Unknown Segment (Max 1) Required
Group SG3 (Max 99) Required
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required

Elements and codes as defined at NAD above.

SEQ To provide details relating to the sequence. (Max 1)
  • C286 – Identification of a sequence and source for sequencing.
    • 1050 – To identify a position in a sequence.
      Type: an, Max Length: 10 (Required)
    • 1159 – Code specifying the source of a sequence identifier.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Report from workstation 1.
      • 2 – Report from workstation 2.
      • 3 – The manufacturer's plant requesting the delivery of the item has allocated the sequence number.
      • 4 – The plant requesting the delivery of an item assigns a number indicating the sequence of the finished article.
      • 5 – The positional sequence when transmitted.
      • 6 – The positional sequence in a message structure as published in a particular UN directory.
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 409 values defined for element 3055 in D17A.

  • 1229 – Code specifying the action to be taken or already taken.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – The information is to be or has been added.
    • 2 – The information is to be or has been deleted.
    • 3 – The information is to be or has been changed.
    • 4 – This line item is not affected by the actual message.
    • 5 – This line item is entirely accepted by the seller.
    • 6 – This line item is accepted but amended by the seller.
    • 7 – This line item is not accepted by the seller.
    • 8 – Code specifying that the message is a schedule only.
    • 9 – Code specifying that amendments are requested/notified.
    • 10 – This line item is not found in the referenced message.
    • 11 – This line is not amended by the buyer.
    • 12 – Code specifying that the line item numbers have changed.
    • 13 – Buyer has deducted amount from payment.
    • 14 – Buyer has a claim against an outstanding invoice.
    • 15 – Factor has been requested to charge back the outstanding item.
    • 16 – Seller agrees to issue a credit note.
    • 17 – New settlement terms have been agreed.
    • 18 – Factor agrees to abide by the outcome of negotiations between seller and buyer.
    • 19 – Seller does not accept validity of dispute.
    • 20 – The reported situation is settled.

    Showing 20 of 118 values defined for element 1229 in D17A.

LOC To identify a place or a location and/or related locations. (Max 9)

Elements and codes as defined at LOC above.

CTA To identify a person or a department to whom communication should be directed. (Max 1)
  • C056 – Code and/or name of a contact such as a department or employee. Code preferred.
    • 3413 – To identify a contact, such as a department or employee.
      Type: an, Max Length: 17
    • 3412 – Name of a contact, such as a department or employee.
      Type: an, Max Length: 256
  • 3139 – Code specifying the function of a contact (e.g. department or person).
    Type: an, Max Length: 3
    Valid Codes:
    • AA – Department/person to contact for matters regarding insurance.
    • AB – Department/person to contact for matters regarding the workshop.
    • AC – Department/person in charge of accepting incoming goods.
    • AD – The contact responsible for accounting matters.
    • AE – Department/person to contact for matters regarding contracts.
    • AF – Department/person to contact for matters regarding land registry.
    • AG – Department/person of the agent which acts on behalf of another party.
    • AH – Department/person to contact for matters regarding technical coordination of works.
    • AI – Department/person to contact for matters regarding project management on behalf of the contractor.
    • AJ – Department/person to contact for matters regarding investments.
    • AK – Department/person to contact for matters regarding management of works on behalf of the owner.
    • AL – Department/person to contact for matters regarding personnel (human resources).
    • AM – Department/person to contact for matters regarding claims.
    • AN – Department/person to contact for laboratory matters.
    • AO – Department/person to contact for matters regarding plant/equipment.
    • AP – Department/person responsible for the accounts payable function within a corporation.
    • AQ – Department/person to contact for matters regarding quantity surveying.
    • AR – Department/person responsible for the accounts receivable within a corporation.
    • AS – Department/person to contact for matters regarding public relations.
    • AT – Department/person to contact for matters regarding technical issues.

    Showing 20 of 101 values defined for element 3139 in D17A.

COM To identify a communication number of a department or a person to whom communication should be directed. (Max 9)
  • C076 – Communication number of a department or employee in a specified channel.
    • 3148 – To identify a communication address.
      Type: an, Max Length: 512 (Required)
    • 3155 – Code specifying the type of communication address.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • AA – A process that, on demand, connects two or more data terminal equipments and permits the exclusive use of a data circuit between them until the connection is released (ISO).
      • AB – Communications number assigned by Societe Internationale de Telecommunications Aeronautiques (SITA).
      • AC – Communications number assigned by Aeronautical Radio Inc.
      • AD – AT&T mailbox identifier.
      • AE – Peripheral device identification.
      • AF – The switched telecommunications network of the United States Department of Defense.
      • AG – The switched telecommunications network of the United States government.
      • AH – Data exchange via the World Wide Web.
      • AI – Identifies that portion of an international telephone number representing the country code to be used when calling internationally.
      • AJ – Identifies the alternate telephone number.
      • AK – Code that identifies the communications number for the online videotex service.
      • AL – Identifies the cellular phone number.
      • AM – The international telephone direct line number.
      • AN – ODETTE File Transfer Protocol.
      • AO – Identification of the Uniform Resource Location (URL) Synonym: World wide web address.
      • AP – VHF radio telephone.
      • AQ – The X.400 address accepting information in the body text of a message.
      • AR – Address capable of receiving messages in accordance with the EDIINT/AS1 protocol for MIME based EDI .
      • AS – Address capable of receiving messages in accordance with the EDIINT/AS2 protocol.
      • AT – Address capable of receiving messages in accordance with the EDIINT/AS3 protocol.

      Showing 20 of 47 values defined for element 3155 in D17A.

RFF To specify a reference. (Max 9)

Elements and codes as defined at RFF above.

ATT To identify a specific attribute. (Max 9)

Elements and codes as defined at ATT above.

PRC To identify a process. (Max 1)
  • C242 – Identification of process type and description.
    • 7187 – Code specifying a type of process.
      Type: an, Max Length: 17 (Required)
      Valid Codes:
      • 1 – A process to prepare wood.
      • 2 – Treatment with a caustic agent.
      • 3 – A process of digesting.
      • 4 – Washing with brownstock.
      • 5 – Removing colour by treatment with an oxidizing agent (a bleach).
      • 6 – The process of drying pulp.
      • 7 – Freezing process.
      • 8 – The information to be processed is in structured form.
      • 9 – The information to be processed is identical and given in structured and unstructured form.
      • 10 – The information to be processed is different and is given in structured and unstructured form.
      • 11 – The information to be processed is in unstructured form.
      • 12 – Slaughter process.
      • 13 – Packing process.
      • 14 – Treated by heat sterilisation.
      • 15 – Treated by chemical sterilisation.
      • 16 – Treated by fumigation.
      • 17 – Treated by irradiation.
      • 18 – Fueling process.
      • 19 – Code specifying the process of accepting the terms and conditions under which business will be conducted.
      • 20 – The provision of a pathology service.

      Showing 20 of 102 values defined for element 7187 in D17A.

    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 409 values defined for element 3055 in D17A.

    • 7186 – Free form description of a type of process.
      Type: an, Max Length: 35
    • 7186 – Free form description of a type of process.
      Type: an, Max Length: 35
  • C830 – To identify the details of a specific process.
    • 7191 – Code specifying a process.
      Type: an, Max Length: 17
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 409 values defined for element 3055 in D17A.

    • 7190 – Free form description of a process.
      Type: an, Max Length: 70
MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 9)
  • C502 – Identification of measurement type.
    • 6313 – Code specifying the attribute measured.
      Type: an, Max Length: 3
      Valid Codes:
      • A – The measured consolidated weight.
      • AAA – [6160] Weight of goods including any packaging that normally going with the goods.
      • AAB – [6292] Weight (mass) of goods including packing but excluding the carrier's equipment.
      • AAC – Total weight of goods excluding packaging.
      • AAD – [6012] Total gross weight (mass) of all goods items referred to as one consignment including packaging but excluding any transport equipment.
      • AAF – [6048] Weight (mass) if goods without any packaging.
      • AAG – Force exerted by a thruster installed at the stern of a vessel.
      • AAH – Force exerted by a thruster installed at the bow of a vessel.
      • AAI – The hydrate content of an alcoholic product at the moment of bottling.
      • AAJ – The number of units contained on a pallet.
      • AAK – An indication of the fat content of a product.
      • AAM – [6300] The measure of the overall size of a ship determined in accordance with the provisions of the International Convention on Tonnage Measurement of Ships, 1969.
      • AAN – [6302] The measure of the useful capacity of a ship determined in accordance with the provisions of the International Convention on Tonnage Measurement of Ships, 1969.
      • AAO – Degree of moisture.
      • AAP – Electromotive force, or difference of electronic potential between two points.
      • AAQ – Value of energy consumption.
      • AAR – Measurement of the rate of dispersal of heat.
      • AAS – Measurement of the flow of air.
      • AAT – Measurement of the impact of a shock.
      • AAU – Temperature identified system or process works according to specifications.

      Showing 20 of 287 values defined for element 6313 in D17A.

    • 6321 – Code specifying the significance of a measurement.
      Type: an, Max Length: 3
      Valid Codes:
      • 3 – The measurement is approximately equal to that specified.
      • 4 – The measurement is equal to that specified.
      • 5 – The measurement is greater than or equal to that specified.
      • 6 – The measurement is greater than that specified.
      • 7 – The measurement is less than that specified.
      • 8 – The measurement is less than or equal to that specified.
      • 9 – Average value for a specific series of readings.
      • 10 – The measurement is not equal to that specified.
      • 12 – The measurement reported is a true value.
      • 13 – The measurement reported is an observed value.
      • 14 – The measurement marked on the object.
      • 15 – The measurement reported is out of range.
  • C174 – Measurement value and relevant minimum and maximum values of the measurement range.
    • 6411 – Code specifying the unit of measurement.
      Type: an, Max Length: 8
    • 6314 – To specify the value of a measurement.
      Type: an, Max Length: 18
    • 6162 – To specify the minimum value of a range.
      Type: n, Max Length: 18
    • 6152 – To specify the maximum value of a range.
      Type: n, Max Length: 18
    • 6432 – Count of the number of significant digits.
      Type: n, Max Length: 2
  • 6311 – Code qualifying the purpose of the measurement.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • AAA – Line item measurement specified by the Food and Drug Administration.
    • AAB – Specified measurements refer to transport conditions for delivery to a distribution centre.
    • AAC – Size of a retail container in terms of volume.
    • AAD – Measurement to be used by/for other United States government agencies.
    • AAE – [6314] To specify the value of a measurement.
    • AAF – The measurement of a consignment or part for customs purpose.
    • AAG – The measurement of the alcohol content.
    • AAH – The total weight of an identified dimension.
    • AAI – Weight at line item level.
    • AAJ – Measurement reportable for visaed merchandise.
    • AAK – Quantity to be written off from the total license amount.
    • AAL – Total tonnage of cargo loaded onto the conveyance.
    • AAM – Total tonnage of cargo unloaded from the conveyance.
    • AAN – Tonnage of conveyance.
    • AAO – Registered summer dead weight total tonnage of the vessel.
    • AAP – Total weight of containerized cargo on vessel.
    • AAQ – Total weight of non-containerized cargo on vessel.
    • AAR – Primary reportable quantity associated with a tariff number.
    • AAS – Secondary reportable quantity associated with a tariff number.
    • AAT – Third reportable quantity associated with a tariff number.

    Showing 20 of 111 values defined for element 6311 in D17A.

  • 7383 – Code specifying the surface or layer of an object.
    Type: an, Max Length: 3
    Valid Codes:
    • 1S – The location is side one.
    • 2S – The location is side two.
    • AA – To indicate that the entity being specified is on the surface.
    • AB – To indicate that the entity being specified is off the surface.
    • AC – Specifies that the surface/layer/position being described is the soluble portion.
    • AD – The surface or layer of the product being described is the opposite corners.
    • AE – The surface or layer of the product being described are the corner diagonals.
    • AF – The left-hand side (looking forward) of a ship, boat or aircraft.
    • AG – The right-hand side (looking forward) of a ship, boat or aircraft.
    • AH – Surface of a tooth directed toward the face and opposite the lingual surface.
    • AI – Surface of the tooth relating to the cutting edge of the anterior teeth, incisors or canines.
    • AJ – Surface of the tooth toward the back of the dental arch, or away from the midline.
    • AK – Surface of the tooth pertaining to or around the cheek.
    • AL – Surface of the tooth pertaining to the masticating surfaces of the posterior teeth.
    • AM – Surface of the tooth pertaining to or around the tongue.
    • AN – Surface of the tooth toward the midline of the dental arch.
    • BC – The location is at the back of the cab.
    • BS – The location is both sides.
    • BT – The location is on the bottom.
    • DF – The location is in the dual fuel tank positions.

    Showing 20 of 33 values defined for element 7383 in D17A.

DTM To specify date, and/or time, or period. (Max 9)

Elements and codes as defined at DTM above.

EMP To specify employment details. (Max 9)
  • C948 – Code and/or description of an employment category.
    • 9005 – Code specifying the employment category.
      Type: an, Max Length: 3
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 409 values defined for element 3055 in D17A.

    • 9004 – Free form description of the employment category.
      Type: an, Max Length: 35
  • C951 – Description of an occupation.
    • 9009 – Code specifying an occupation.
      Type: an, Max Length: 3
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 409 values defined for element 3055 in D17A.

    • 9008 – Free form description of an occupation.
      Type: an, Max Length: 35
    • 9008 – Free form description of an occupation.
      Type: an, Max Length: 35
  • C950 – Qualification classification description and/or code. This specifies the trade, skill, professional or similar qualification category.
    • 9007 – Code specifying a qualification classification.
      Type: an, Max Length: 3
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 409 values defined for element 3055 in D17A.

    • 9006 – Free form description of a qualification classification.
      Type: an, Max Length: 35
    • 9006 – Free form description of a qualification classification.
      Type: an, Max Length: 35
  • 9003 – Code qualifying the employment details.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • 1 – Main employment.
    • 2 – Secondary employment.
    • 3 – Tertiary employment.
    • 4 – To specify a profession.
  • 3480 – Name of a job title such as rank or rating of crew member.
    Type: an, Max Length: 35
  • 9035 – Code specifying the application area of a qualification.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – Public administration sector.
    • 2 – Agricultural sector.
    • 3 – Automotive sector.
    • 4 – Transport sector.
    • 5 – Finance sector.
    • 6 – Tourism sector.
    • 7 – Construction sector.
FTX To provide free form or coded text information. (Max 9)

Elements and codes as defined at FTX above.

Group SG4 (Max 99)
DOC To identify documents and details directly related to it. (Max 1) Required
  • C002 – Identification of a type of document/message by code or name. Code preferred.
    • 1001 – Code specifying the document name.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Certificate providing the values of an analysis.
      • 2 – Certificate certifying the conformity to predefined definitions.
      • 3 – Certificate certifying the quality of goods, services etc.
      • 4 – Report providing the results of a test session.
      • 5 – Report specifying the performance values of products.
      • 6 – Report providing specification values of products.
      • 7 – Reports on events during production process.
      • 8 – Document/message describes the test report of the first sample.
      • 9 – A document/message to enable the transmission of information regarding pricing and catalogue details for goods and services offered by a seller to a buyer.
      • 10 – Document/message providing basic data concerning a party.
      • 11 – A pre-approved document relating to federal label approval requirements.
      • 12 – Certificate certifying a specific quality of agricultural products.
      • 13 – Document/message which evidences the transport of goods by post (e.g. mail, parcel, etc.).
      • 14 – Certificate certifying the weight of goods.
      • 15 – Document/message specifying the weight of goods.
      • 16 – Document by means of which the documentary credit applicant specifies the conditions for the certificate and by whom the certificate is to be issued.
      • 17 – Document identifying goods in which the issuing authority expressly certifies that the goods originate in a specific country or part of, or group of countries. It also states the price and/or cost of the goods with the purpose of determining the customs origin.
      • 18 – Specific form of transit declaration issued by the exporter (movement certificate).
      • 19 – Certificate certifying the quantity of goods, services etc.
      • 20 – Usage of QALITY-message.

      Showing 20 of 727 values defined for element 1001 in D17A.

    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 409 values defined for element 3055 in D17A.

    • 1000 – Name of a document.
      Type: an, Max Length: 35
  • C503 – Identification of document/message by number, status, source and/or language.
    • 1004 – To identify a document.
      Type: an, Max Length: 70
    • 1373 – Code specifying the status of a document.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – The specified document is accepted.
      • 2 – Notice that a specific document will be accompanying the goods.
      • 3 – The specified document is conditionally accepted.
      • 4 – Notice that a specific document/message will be transmitted via a separate EDI message.
      • 5 – Notice that the specific document or message is for information only.
      • 6 – Notice that a specific document or message will not be sent via EDI.
      • 7 – Request for a specific message to be formatted and transmitted or a request for a specific document to be raised and sent.
      • 8 – The specified document is rejected.
      • 9 – The document or message is to be printed.
      • 10 – Specific document is currently valid.
      • 11 – Specified document is not available.
      • 12 – Customs declaration to which the document is related completed or exhaust the allowance stated on the document. The document is attached to the Customs declaration.
      • 13 – Customs declaration to which the document is related does not complete or exhaust the allowance stated on the document . The document is not attached to the declaration but has already been lodged in the Customs station.
      • 14 – Customs declaration to which the document is related completed or exhaust the allowance stated on the document. The usage of the document is complete. The document is not attached to the declaration but has already been lodged in the Customs station.
      • 15 – Customs declaration to which the document is related does not complete or exhaust the allowance stated on the document. The document can continue to be used for future declarations until the allowance is exhausted. The document is not attached to the declaration but has already been lodged in the Customs station.
      • 16 – Specified document is not or cannot be attached.
      • 17 – Document not attached to the Customs declaration but is attached to the goods.
      • 18 – Specified document is attached to the Customs declaration and will be required to be returned to the declarant after Customs endorsement.
      • 19 – Application has been submitted for that document.
      • 20 – Indicates that the document has legal validity from the date of receival of the cargo.

      Showing 20 of 39 values defined for element 1373 in D17A.

    • 1366 – Free form description of the source of a document.
      Type: an, Max Length: 70
    • 3453 – Code specifying the language name.
      Type: an, Max Length: 3
    • 1056 – To identify a version.
      Type: an, Max Length: 9
    • 1060 – To identify a revision.
      Type: an, Max Length: 6
  • 3153 – Code specifying the type of communication medium.
    Type: an, Max Length: 3
    Valid Codes:
    • AA – A process that, on demand, connects two or more data terminal equipments and permits the exclusive use of a data circuit between them until the connection is released (ISO).
    • AB – Communications number assigned by Societe Internationale de Telecommunications Aeronautiques (SITA).
    • AC – Communications number assigned by Aeronautical Radio Inc.
    • AD – A communication channel identifying a courier.
    • AE – Express (e.g. overnight) postal service document delivery.
    • CA – The cable is used as communication medium.
    • EI – Number identifying the service and service user.
    • EM – Exchange of mail by electronic means.
    • EX – Telephone extension.
    • FT – According to ISO.
    • FX – Device used for transmitting and reproducing fixed graphic material (as printing) by means of signals over telephone lines or other electronic transmission media.
    • GM – GEIS mailbox system is used as communication medium.
    • IE – IBM IE is used as communication medium.
    • IM – Internal mail address/number.
    • MA – Postal service document delivery.
    • PB – Postbox system is used as communication medium.
    • PS – The process of routing and transferring data by means of addressed packets so that a channel is occupied only during the transmission; upon completion of the transmission the channel is made available for the transfer of other packets (ISO).
    • SW – Communications address assigned by Society for Worldwide Interbank Financial Telecommunications s.c.
    • TE – Voice/data transmission by telephone.
    • TG – Text transmission via telegraph.

    Showing 20 of 25 values defined for element 3153 in D17A.

  • 1220 – Quantity of document copies required.
    Type: n, Max Length: 2
  • 1218 – Quantity of document originals required.
    Type: n, Max Length: 2
GIR To specify a related set of identification numbers. (Max 99)
  • C206 – The identification of an object.
    • 7402 – Code specifying the unique identity of an object.
      Type: an, Max Length: 35 (Required)
    • 7405 – Code qualifying the identification of an object.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – A number that is used to identify goods from a freight forwarder/consolidator.
      • AB – The first element in a series of elements that together define the structure of an object.
      • AC – The second element in a series of elements that together define the structure of an object.
      • AD – The third element in a series of elements that together define the structure of an object.
      • AE – The fourth element in a series of elements that together define the structure of an object.
      • AF – The fifth element in a series of elements that together define the structure of an object.
      • AG – The sixth element in a series of elements that together define the structure of an object.
      • AH – The seventh element in a series of elements that together define the structure of an object.
      • AI – The eighth element in a series of elements that together define the structure of an object.
      • AJ – The ninth element in a series of elements that together define the structure of an object.
      • AK – The identity of a data set.
      • AL – [1420] Reference number to identify a kanban card.
      • AM – Level number in a hierarchy or other structure.
      • AN – A unique number identifying a particular assembly or other manufacturing process.
      • AO – A number to identify the position within a package according to agreed rules between partners.
      • AP – A name or number which identifies a product.
      • AQ – Number assigned to a release.
      • AR – Statistical concept.
      • AS – A table of items e.g. figures and text represented in rows and columns.
      • AT – Number identifying a group of articles in a predescribed unit load for shipment/dispatch as agreed between partners.

      Showing 20 of 97 values defined for element 7405 in D17A.

    • 4405 – Code specifying a status.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Remark that the requested service in the order remains outstanding.
      • 2 – The instruction has been completed.
      • 3 – The information has been passed on.
      • 4 – The amount has the status of finality.
      • 5 – The amount is subject to finality.
      • 6 – The amount quoted is a minimum tariff.
      • 7 – The amount quoted is a fixed tariff.
      • 8 – The amount quoted is a maximum tariff.
      • 9 – The amount is quoted for information only, it is not part of the charges to be deducted or added.
      • 10 – The amount is available today.
      • 11 – The amount is available on the next banking office day after the booking date.
      • 12 – The amount is available on the second banking office day after the booking date.
      • 13 – The amount available on the third banking office day after the booking date.
      • 14 – Funds not collected by beneficiary.
      • 15 – The amount or quantity is zero.
      • 16 – No status or condition has been advised.
      • 17 – A status or condition has been requested.
      • 18 – No charge is to be made.
      • 19 – The quantity has been the subject of a rounding operation.
      • 20 – Intended to last or function indefinitely.

      Showing 20 of 146 values defined for element 4405 in D17A.

  • C206 – The identification of an object.
    • 7402 – Code specifying the unique identity of an object.
      Type: an, Max Length: 35 (Required)
    • 7405 – Code qualifying the identification of an object.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – A number that is used to identify goods from a freight forwarder/consolidator.
      • AB – The first element in a series of elements that together define the structure of an object.
      • AC – The second element in a series of elements that together define the structure of an object.
      • AD – The third element in a series of elements that together define the structure of an object.
      • AE – The fourth element in a series of elements that together define the structure of an object.
      • AF – The fifth element in a series of elements that together define the structure of an object.
      • AG – The sixth element in a series of elements that together define the structure of an object.
      • AH – The seventh element in a series of elements that together define the structure of an object.
      • AI – The eighth element in a series of elements that together define the structure of an object.
      • AJ – The ninth element in a series of elements that together define the structure of an object.
      • AK – The identity of a data set.
      • AL – [1420] Reference number to identify a kanban card.
      • AM – Level number in a hierarchy or other structure.
      • AN – A unique number identifying a particular assembly or other manufacturing process.
      • AO – A number to identify the position within a package according to agreed rules between partners.
      • AP – A name or number which identifies a product.
      • AQ – Number assigned to a release.
      • AR – Statistical concept.
      • AS – A table of items e.g. figures and text represented in rows and columns.
      • AT – Number identifying a group of articles in a predescribed unit load for shipment/dispatch as agreed between partners.

      Showing 20 of 97 values defined for element 7405 in D17A.

    • 4405 – Code specifying a status.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Remark that the requested service in the order remains outstanding.
      • 2 – The instruction has been completed.
      • 3 – The information has been passed on.
      • 4 – The amount has the status of finality.
      • 5 – The amount is subject to finality.
      • 6 – The amount quoted is a minimum tariff.
      • 7 – The amount quoted is a fixed tariff.
      • 8 – The amount quoted is a maximum tariff.
      • 9 – The amount is quoted for information only, it is not part of the charges to be deducted or added.
      • 10 – The amount is available today.
      • 11 – The amount is available on the next banking office day after the booking date.
      • 12 – The amount is available on the second banking office day after the booking date.
      • 13 – The amount available on the third banking office day after the booking date.
      • 14 – Funds not collected by beneficiary.
      • 15 – The amount or quantity is zero.
      • 16 – No status or condition has been advised.
      • 17 – A status or condition has been requested.
      • 18 – No charge is to be made.
      • 19 – The quantity has been the subject of a rounding operation.
      • 20 – Intended to last or function indefinitely.

      Showing 20 of 146 values defined for element 4405 in D17A.

  • C206 – The identification of an object.
    • 7402 – Code specifying the unique identity of an object.
      Type: an, Max Length: 35 (Required)
    • 7405 – Code qualifying the identification of an object.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – A number that is used to identify goods from a freight forwarder/consolidator.
      • AB – The first element in a series of elements that together define the structure of an object.
      • AC – The second element in a series of elements that together define the structure of an object.
      • AD – The third element in a series of elements that together define the structure of an object.
      • AE – The fourth element in a series of elements that together define the structure of an object.
      • AF – The fifth element in a series of elements that together define the structure of an object.
      • AG – The sixth element in a series of elements that together define the structure of an object.
      • AH – The seventh element in a series of elements that together define the structure of an object.
      • AI – The eighth element in a series of elements that together define the structure of an object.
      • AJ – The ninth element in a series of elements that together define the structure of an object.
      • AK – The identity of a data set.
      • AL – [1420] Reference number to identify a kanban card.
      • AM – Level number in a hierarchy or other structure.
      • AN – A unique number identifying a particular assembly or other manufacturing process.
      • AO – A number to identify the position within a package according to agreed rules between partners.
      • AP – A name or number which identifies a product.
      • AQ – Number assigned to a release.
      • AR – Statistical concept.
      • AS – A table of items e.g. figures and text represented in rows and columns.
      • AT – Number identifying a group of articles in a predescribed unit load for shipment/dispatch as agreed between partners.

      Showing 20 of 97 values defined for element 7405 in D17A.

    • 4405 – Code specifying a status.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Remark that the requested service in the order remains outstanding.
      • 2 – The instruction has been completed.
      • 3 – The information has been passed on.
      • 4 – The amount has the status of finality.
      • 5 – The amount is subject to finality.
      • 6 – The amount quoted is a minimum tariff.
      • 7 – The amount quoted is a fixed tariff.
      • 8 – The amount quoted is a maximum tariff.
      • 9 – The amount is quoted for information only, it is not part of the charges to be deducted or added.
      • 10 – The amount is available today.
      • 11 – The amount is available on the next banking office day after the booking date.
      • 12 – The amount is available on the second banking office day after the booking date.
      • 13 – The amount available on the third banking office day after the booking date.
      • 14 – Funds not collected by beneficiary.
      • 15 – The amount or quantity is zero.
      • 16 – No status or condition has been advised.
      • 17 – A status or condition has been requested.
      • 18 – No charge is to be made.
      • 19 – The quantity has been the subject of a rounding operation.
      • 20 – Intended to last or function indefinitely.

      Showing 20 of 146 values defined for element 4405 in D17A.

  • C206 – The identification of an object.
    • 7402 – Code specifying the unique identity of an object.
      Type: an, Max Length: 35 (Required)
    • 7405 – Code qualifying the identification of an object.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – A number that is used to identify goods from a freight forwarder/consolidator.
      • AB – The first element in a series of elements that together define the structure of an object.
      • AC – The second element in a series of elements that together define the structure of an object.
      • AD – The third element in a series of elements that together define the structure of an object.
      • AE – The fourth element in a series of elements that together define the structure of an object.
      • AF – The fifth element in a series of elements that together define the structure of an object.
      • AG – The sixth element in a series of elements that together define the structure of an object.
      • AH – The seventh element in a series of elements that together define the structure of an object.
      • AI – The eighth element in a series of elements that together define the structure of an object.
      • AJ – The ninth element in a series of elements that together define the structure of an object.
      • AK – The identity of a data set.
      • AL – [1420] Reference number to identify a kanban card.
      • AM – Level number in a hierarchy or other structure.
      • AN – A unique number identifying a particular assembly or other manufacturing process.
      • AO – A number to identify the position within a package according to agreed rules between partners.
      • AP – A name or number which identifies a product.
      • AQ – Number assigned to a release.
      • AR – Statistical concept.
      • AS – A table of items e.g. figures and text represented in rows and columns.
      • AT – Number identifying a group of articles in a predescribed unit load for shipment/dispatch as agreed between partners.

      Showing 20 of 97 values defined for element 7405 in D17A.

    • 4405 – Code specifying a status.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Remark that the requested service in the order remains outstanding.
      • 2 – The instruction has been completed.
      • 3 – The information has been passed on.
      • 4 – The amount has the status of finality.
      • 5 – The amount is subject to finality.
      • 6 – The amount quoted is a minimum tariff.
      • 7 – The amount quoted is a fixed tariff.
      • 8 – The amount quoted is a maximum tariff.
      • 9 – The amount is quoted for information only, it is not part of the charges to be deducted or added.
      • 10 – The amount is available today.
      • 11 – The amount is available on the next banking office day after the booking date.
      • 12 – The amount is available on the second banking office day after the booking date.
      • 13 – The amount available on the third banking office day after the booking date.
      • 14 – Funds not collected by beneficiary.
      • 15 – The amount or quantity is zero.
      • 16 – No status or condition has been advised.
      • 17 – A status or condition has been requested.
      • 18 – No charge is to be made.
      • 19 – The quantity has been the subject of a rounding operation.
      • 20 – Intended to last or function indefinitely.

      Showing 20 of 146 values defined for element 4405 in D17A.

  • C206 – The identification of an object.
    • 7402 – Code specifying the unique identity of an object.
      Type: an, Max Length: 35 (Required)
    • 7405 – Code qualifying the identification of an object.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – A number that is used to identify goods from a freight forwarder/consolidator.
      • AB – The first element in a series of elements that together define the structure of an object.
      • AC – The second element in a series of elements that together define the structure of an object.
      • AD – The third element in a series of elements that together define the structure of an object.
      • AE – The fourth element in a series of elements that together define the structure of an object.
      • AF – The fifth element in a series of elements that together define the structure of an object.
      • AG – The sixth element in a series of elements that together define the structure of an object.
      • AH – The seventh element in a series of elements that together define the structure of an object.
      • AI – The eighth element in a series of elements that together define the structure of an object.
      • AJ – The ninth element in a series of elements that together define the structure of an object.
      • AK – The identity of a data set.
      • AL – [1420] Reference number to identify a kanban card.
      • AM – Level number in a hierarchy or other structure.
      • AN – A unique number identifying a particular assembly or other manufacturing process.
      • AO – A number to identify the position within a package according to agreed rules between partners.
      • AP – A name or number which identifies a product.
      • AQ – Number assigned to a release.
      • AR – Statistical concept.
      • AS – A table of items e.g. figures and text represented in rows and columns.
      • AT – Number identifying a group of articles in a predescribed unit load for shipment/dispatch as agreed between partners.

      Showing 20 of 97 values defined for element 7405 in D17A.

    • 4405 – Code specifying a status.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Remark that the requested service in the order remains outstanding.
      • 2 – The instruction has been completed.
      • 3 – The information has been passed on.
      • 4 – The amount has the status of finality.
      • 5 – The amount is subject to finality.
      • 6 – The amount quoted is a minimum tariff.
      • 7 – The amount quoted is a fixed tariff.
      • 8 – The amount quoted is a maximum tariff.
      • 9 – The amount is quoted for information only, it is not part of the charges to be deducted or added.
      • 10 – The amount is available today.
      • 11 – The amount is available on the next banking office day after the booking date.
      • 12 – The amount is available on the second banking office day after the booking date.
      • 13 – The amount available on the third banking office day after the booking date.
      • 14 – Funds not collected by beneficiary.
      • 15 – The amount or quantity is zero.
      • 16 – No status or condition has been advised.
      • 17 – A status or condition has been requested.
      • 18 – No charge is to be made.
      • 19 – The quantity has been the subject of a rounding operation.
      • 20 – Intended to last or function indefinitely.

      Showing 20 of 146 values defined for element 4405 in D17A.

  • 7297 – Code qualifying the type of set.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • 1 – Identification of the product set.
    • 2 – Identification of the licence set.
    • 3 – Related numbers identifying a package such as a bar code label number related to a kanban card number, etc.
    • 4 – A code which indicates that the identities which follow are related to a particular vehicle which may have been previously identified.
    • 5 – The source database of the data in a data set.
    • 6 – The target database for the data in a data set.
    • 7 – A coded or non coded list of values.
    • 8 – The contract related item numbers.
    • 9 – Financial security identifier set.
    • 10 – A code to identify a set of numbers used for accounting.
    • 11 – A set of numbers to identify a project.
    • 12 – A set of numbers to identify a plan of work.
    • 13 – A set of numbers to identify a schedule of work.
    • 14 – A set of numbers to identify a resource.
    • 15 – A set of numbers to identify a milestone event.
    • 16 – A set of numbers to identify an interface work task.
    • 17 – A set of numbers to identify a work task constraint.
    • 18 – Position number(s) of a data structure's relevant components.
PYT To specify the terms of payment. (Max 1)
  • C019 – Terms of payment information.
    • 4277 – Identification of the terms of payment between the parties to a transaction (generic term).
      Type: an, Max Length: 17
      Valid Codes:
      • 1 – Draft(s) must be drawn on the issuing bank.
      • 2 – Draft(s) must be drawn on the advising bank.
      • 3 – Draft(s) must be drawn on the reimbursing bank.
      • 4 – Draft(s) must be drawn on the applicant.
      • 5 – Draft(s) must be drawn on any other drawee.
      • 6 – No drafts required.
      • 7 – An indication that the payment means are specified in a commercial account summary.
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 409 values defined for element 3055 in D17A.

    • 4276 – Free form description of the conditions of payment between the parties to a transaction.
      Type: an, Max Length: 35
  • 4279 – Code qualifying the type of payment terms.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • 1 – Payment conditions normally applied.
    • 2 – Payments are due at end of month.
    • 3 – Payments are due on the fixed date specified.
    • 4 – Payments are deferred beyond the normal due date.
    • 5 – Payment terms on which discounts are not applicable.
    • 6 – Different payment terms negotiated under a documentary credit.
    • 7 – Payment is extended beyond the normal due date.
    • 8 – Payment terms reflect the basic offered discount.
    • 9 – Occurring in the next month after present.
    • 10 – Payment is due on receipt of invoice.
    • 11 – Payment terms to be chosen by buyer (from options separately advised).
    • 12 – Payment due ten days after end of a calendar month.
    • 13 – Seller will advise buyer of payment terms by separate transaction.
    • 14 – Payments are to be made against statement.
    • 15 – Payment terms have no charge.
    • 16 – Payment terms are not yet defined.
    • 17 – Payment is due the end of the current or specified month.
    • 18 – Payment terms have been previously agreed upon.
    • 19 – The payment terms require the use of United States funds.
    • 20 – Payment terms on which penalties apply.

    Showing 20 of 79 values defined for element 4279 in D17A.

  • 2475 – Code specifying a time that references an event that will or has occurred.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – Payment time reference is date of order.
    • 2 – Payment time reference is date of confirmation.
    • 3 – Payment time reference is date of contract.
    • 4 – Payment time reference is date of signature of contract.
    • 5 – Payment time reference is date of invoice.
    • 6 – Payment time reference is date of credit note.
    • 7 – Payment time reference is date of present document.
    • 8 – Payment time reference is date of confirmation received.
    • 9 – Payment time reference is date of invoice received.
    • 10 – The date when, at the latest, the bids have to be submitted. This date is required for each call for tender, either in public or private sector.
    • 11 – Payment time reference is date of credit note received.
    • 12 – Payment time reference is date of present document received.
    • 13 – Payment time reference is date of resale by the buyer.
    • 14 – Payment time reference is date of resale proceeds are collected by buyer. "buyer" is a retailer. Retailer will pay his supplier when having sold goods and money received.
    • 21 – Payment time reference is date when goods are received by buyer.
    • 22 – Payment time reference is date when goods are received by buyer's agent.
    • 23 – Payment time reference is date when goods are received by carrier.
    • 24 – Payment time reference is date when goods are leaving the sellers factory.
    • 25 – Payment time reference is the date when goods are handed over for shipment by the seller or his agent.
    • 26 – Date the transport arrived at the agreed destination.

    Showing 20 of 65 values defined for element 2475 in D17A.

  • 2009 – Code relating terms to a reference date, time or period.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – Payment terms related to reference date.
    • 2 – Payment terms related to time before reference date.
    • 3 – Payment terms related to time after reference date.
    • 4 – Payment terms are at the end of the ten day period containing the reference date.
    • 5 – Payment terms are at the end of the two week period containing the reference date.
    • 6 – Payment terms are at the end of the month containing the reference date.
    • 7 – Payment terms are at the end of the month following the month of reference date.
    • 8 – Payment terms are at the end of the quarter containing the reference date.
    • 9 – Payment terms are at the end of the year containing the reference date.
    • 10 – Payment terms are at the end of the week containing the reference date.
    • 11 – Payment terms are 10 days after the end of the referenced month.
    • 12 – End of the half year in which the referred date falls.
    • 13 – Payment terms related to a time inclusive of and after a reference date.
    • 14 – Payment terms are at the end of the 15-day period containing the reference date.
    • 15 – Payment terms are on or before.
    • 16 – The payment terms are at, whichever is first, the 15th or the last day of the month following the payment terms period (payment terms period = period of time between the reference date and the theoretical due date).
    • 17 – Payment terms related to a time after the end of the month containing the reference date.
  • 2151 – Code specifying the type of period.
    Type: an, Max Length: 3
    Valid Codes:
    • 3M – A subdivision of a year into four equal parts.
    • 6M – A subdivision of a year into two equal parts.
    • AA – Flight duration irrespective of time zones.
    • AD – Flight duration irrespective of time zones.
    • CD – Period given as a number of days including weekends and holidays.
    • CW – Period given as a number of 7day-weeks including holidays.
    • D – The twenty-four hour period during which the earth completes one rotation on its axis.
    • DC – Period of 10 days.
    • F – A period of time lasting fourteen days. Synonym: Fortnight.
    • H – One of the twenty-four sub-divisions of a day.
    • HM – A subdivision of a month into two equal parts.
    • M – One of twelve divisions of the year as determined by the Gregorian calendar.
    • MN – A unit of time equal to 1/60 of an hour, or 60 seconds.
    • P – A period of time, measured in monthly increments, consisting of four sequential months.
    • S – A unit of time equal to 1/60 of a minute.
    • SD – The voyage duration irrespective of time zones.
    • SI – An indefinite period.
    • W – Period of seven days.
    • WD – Day on which work is usually done.
    • WW – Monday through Friday.

    Showing 20 of 22 values defined for element 2151 in D17A.

  • 2152 – Count of the number of periods.
    Type: n, Max Length: 3
DTM To specify date, and/or time, or period. (Max 9)

Elements and codes as defined at DTM above.

FTX To provide free form or coded text information. (Max 9)

Elements and codes as defined at FTX above.

Group SG5 (Max 1)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required

Elements and codes as defined at NAD above.

LOC To identify a place or a location and/or related locations. (Max 9)

Elements and codes as defined at LOC above.

Group SG6 (Max 99)
MOA To specify a monetary amount. (Max 1) Required

Elements and codes as defined at MOA above.

DTM To specify date, and/or time, or period. (Max 1)

Elements and codes as defined at DTM above.

FCA Description of allocation of charges. (Max 1)

Elements and codes as defined at FCA above.

UNT Unknown Segment (Max 1) Required

Sources and further reading