Try it now Login

UN/EDIFACT D14B ITRRPT Message

Review the ITRRPT segment sequence, mandatory fields, repeat counts and valid codes for the D14B EDIFACT directory.

UNH Unknown Segment (Max 1) Required

BGM To indicate the type and function of a message and to transmit the identifying number. (Max 1) Required

C002 – Identification of a type of document/message by code or name. Code preferred.
- 1001 – Code specifying the document name.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Certificate providing the values of an analysis.
  - 2 – Certificate certifying the conformity to predefined definitions.
  - 3 – Certificate certifying the quality of goods, services etc.
  - 4 – Report providing the results of a test session.
  - 5 – Report specifying the performance values of products.
  - 6 – Report providing specification values of products.
  - 7 – Reports on events during production process.
  - 8 – Document/message describes the test report of the first sample.
  - 9 – A document/message to enable the transmission of information regarding pricing and catalogue details for goods and services offered by a seller to a buyer.
  - 10 – Document/message providing basic data concerning a party.
  - 11 – A pre-approved document relating to federal label approval requirements.
  - 12 – Certificate certifying a specific quality of agricultural products.
  - 13 – Document/message which evidences the transport of goods by post (e.g. mail, parcel, etc.).
  - 14 – Certificate certifying the weight of goods.
  - 15 – Document/message specifying the weight of goods.
  - 16 – Document by means of which the documentary credit applicant specifies the conditions for the certificate and by whom the certificate is to be issued.
  - 17 – Document identifying goods in which the issuing authority expressly certifies that the goods originate in a specific country or part of, or group of countries. It also states the price and/or cost of the goods with the purpose of determining the customs origin.
  - 18 – Specific form of transit declaration issued by the exporter (movement certificate).
  - 19 – Certificate certifying the quantity of goods, services etc.
  - 20 – Usage of QALITY-message.
  Showing 20 of 704 values defined for element 1001 in D14B.
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 398 values defined for element 3055 in D14B.
- 1000 – Name of a document.
  Type: an, Max Length: 35
C106 – Identification of a document/message by its number and eventually its version or revision.
- 1004 – To identify a document.
  Type: an, Max Length: 70
- 1056 – To identify a version.
  Type: an, Max Length: 9
- 1060 – To identify a revision.
  Type: an, Max Length: 6
1225 – Code indicating the function of the message.
Type: an, Max Length: 3
Valid Codes:
- 1 – Message cancelling a previous transmission for a given transaction.
- 2 – Message containing items to be added.
- 3 – Message containing items to be deleted.
- 4 – Message containing items to be changed.
- 5 – Message replacing a previous message.
- 6 – Message confirming the details of a previous transmission where such confirmation is required or recommended under the terms of a trading partner agreement.
- 7 – The message is a duplicate of a previously generated message.
- 8 – Code indicating that the referenced message is a status.
- 9 – Initial transmission related to a given transaction.
- 10 – Message whose reference number is not filed.
- 11 – Message responding to a previous message or document.
- 12 – Message indicating that the referenced message was received but not yet processed.
- 13 – Code indicating that the referenced message is a request.
- 14 – Code indicating that the information contained in the message is an advance notification of information to follow.
- 15 – Repeated message transmission for reminding purposes.
- 16 – Message content is a proposal.
- 17 – Referenced transaction cancelled, reissued message will follow.
- 18 – New issue of a previous message (maybe cancelled).
- 19 – Change information submitted by buyer but initiated by seller.
- 20 – Message to replace the heading of a previous message.
Showing 20 of 65 values defined for element 1225 in D14B.
4343 – Code specifying the type of acknowledgment required or transmitted.
Type: an, Max Length: 3
Valid Codes:
- AA – Receiver of the payment message needs to return a debit advice in response to the payment message.
- AB – Indicates that an acknowledgement relating to receipt of message is required.
- AC – Acknowledge complete including changes.
- AD – Acknowledge complete without changes.
- AE – A debit advice is requested for each transaction in the message.
- AF – The sender wishes to receive both a Debit Advice and an acknowledgement of receipt for a payment message.
- AG – Authentication, by a party, of a document established for him by another party.
- AH – A debit advice and message acknowledgement are requested for each transaction in the message.
- AI – Acknowledgement of changes only is required.
- AJ – Indication that the referenced offer or transaction (e.g. cargo booking or quotation request) is being dealt with.
- AP – Indication that the referenced offer or transaction (e.g., cargo booking or quotation request) has been accepted.
- AQ – The sender of the message expects a response.
- AR – Documentary credit collection forwarded directly.
- AS – The receiver of the message is to acknowledge receipt of the message and sent a credit advice for each credit.
- CA – Indication that the referenced offer or transaction (e.g., cargo booking or quotation request) has been accepted under conditions indicated in this message.
- CO – Indication that the message contains the physical measurements on which the charges will be based.
- NA – Specifies that no acknowledgement is needed in response to this message.
- RE – Indication that the referenced offer or transaction (e.g., cargo booking or quotation request) is not accepted.
- UR – The message recipient is to send a credit advice in response to the message.
- US – An acknowledgement is requested when an error occurred.
Showing 20 of 23 values defined for element 4343 in D14B.
1373 – Code specifying the status of a document.
Type: an, Max Length: 3
Valid Codes:
- 1 – The specified document is accepted.
- 2 – Notice that a specific document will be accompanying the goods.
- 3 – The specified document is conditionally accepted.
- 4 – Notice that a specific document/message will be transmitted via a separate EDI message.
- 5 – Notice that the specific document or message is for information only.
- 6 – Notice that a specific document or message will not be sent via EDI.
- 7 – Request for a specific message to be formatted and transmitted or a request for a specific document to be raised and sent.
- 8 – The specified document is rejected.
- 9 – The document or message is to be printed.
- 10 – Specific document is currently valid.
- 11 – Specified document is not available.
- 12 – Customs declaration to which the document is related completed or exhaust the allowance stated on the document. The document is attached to the Customs declaration.
- 13 – Customs declaration to which the document is related does not complete or exhaust the allowance stated on the document . The document is not attached to the declaration but has already been lodged in the Customs station.
- 14 – Customs declaration to which the document is related completed or exhaust the allowance stated on the document. The usage of the document is complete. The document is not attached to the declaration but has already been lodged in the Customs station.
- 15 – Customs declaration to which the document is related does not complete or exhaust the allowance stated on the document. The document can continue to be used for future declarations until the allowance is exhausted. The document is not attached to the declaration but has already been lodged in the Customs station.
- 16 – Specified document is not or cannot be attached.
- 17 – Document not attached to the Customs declaration but is attached to the goods.
- 18 – Specified document is attached to the Customs declaration and will be required to be returned to the declarant after Customs endorsement.
- 19 – Application has been submitted for that document.
- 20 – Indicates that the document has legal validity from the date of receival of the cargo.
Showing 20 of 38 values defined for element 1373 in D14B.
3453 – Code specifying the language name.
Type: an, Max Length: 3

DTM To specify date, and/or time, or period. (Max 10)

C507 – Date and/or time, or period relevant to the specified date/time/period type.
- 2005 – Code qualifying the function of a date, time or period.
  Type: an, Max Length: 3 (Required)
  Valid Codes:
  - 1 – Actual date/time on which the service was completed.
  - 2 – (2105) Date on which buyer requests goods to be delivered.
  - 3 – [2377] Date of issue of an invoice.
  - 4 – [2011] Date of order.
  - 5 – A period of time when saleable stocks are expected to cover demand for a product.
  - 6 – The date an entity moved from a location.
  - 7 – (2069) Date and/or time at which specified event or document becomes effective.
  - 8 – Date/time when the purchase order is received by the seller.
  - 9 – Date/time of processing.
  - 10 – Date on which goods should be shipped or despatched by the supplier.
  - 11 – [2171] Date/time on which the goods are or are expected to be despatched or shipped.
  - 12 – Date by which payment should be made if discount terms are to apply.
  - 13 – Date by which payment must be made.
  - 14 – Date/time when instalments are due.
  - 15 – Date/time when promotion activities begin.
  - 16 – Date/time when promotion activities end.
  - 17 – (2109) Date and/or time when the shipper of the goods expects delivery will take place.
  - 18 – The date/time/period of the act, or an instance of installing something or someone.
  - 19 – Period of time between slaughter and delivery during which meat is ageing.
  - 20 – Date/time when cheque is issued.
  Showing 20 of 787 values defined for element 2005 in D14B.
- 2380 – The value of a date, a date and time, a time or of a period in a specified representation.
  Type: an, Max Length: 35
- 2379 – Code specifying the representation of a date, time or period.
  Type: an, Max Length: 3
  Valid Codes:
  - 2 – Calendar date: D = Day; M = Month; Y = Year.
  - 3 – Calendar date: M = Month; D = Day; Y = Year.
  - 4 – Calendar date C=Century; Y=Year; M=Month; D=Day.
  - 5 – Calendar date and time: C=Century; Y=Year; M=Month; D=Day; H=Hour; M=Minute.
  - 6 – Half-month: CC=century YY=year MM=month, B=1:first half month, B=2:second half month.
  - 7 – Week within a calendar month: CC=century YY=year MM=month. W=1-5 first week to fifth week in a month.
  - 8 – Shift within a calendar day: CC=century YY=year MM=month DD=day S=1-9 shift in a day.
  - 9 – Time period within a calendar day: CC=century YY=year MM=month DD=day PP=00-99 time period.
  - 10 – Calendar date including time with minutes: C=Century; Y=Year; M=Month; D=Day; T=Time designator; H=Hour; M=Minutes. The character [T] shall be used as time designator to indicate the start of the representation of the time. For example: 20010912T1433.
  - 101 – Calendar date: Y = Year; M = Month; D = Day.
  - 102 – Calendar date: C = Century ; Y = Year ; M = Month ; D = Day.
  - 103 – Calendar week day: Y = Year ; W = Week ; D = Day Week number 01 is always first week of January Day number 1 is always Monday.
  - 104 – A period of time specified by giving the start week of a month followed by the end week of a month. Data is to be transmitted as consecutive characters without hyphen.
  - 105 – Calendar day: Y = Year ; D = Day January the first = Day 001 Always start numbering the days of the year from January 1st through December 31st.
  - 106 – Day of a month: M = Month; D = Day.
  - 107 – Day's number within a specific year: D = Day.
  - 108 – Week's number within a specific year: W = Week.
  - 109 – Month's number within a specific year: M = Month.
  - 110 – Day's number within is a specific month: D = Day.
  - 201 – Calendar date including time without seconds: Y = Year; M = Month; D = Day; H = Hour; M = Minute.
  Showing 20 of 86 values defined for element 2379 in D14B.

MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 5)

C502 – Identification of measurement type.
- 6313 – Code specifying the attribute measured.
  Type: an, Max Length: 3
  Valid Codes:
  - A – The measured consolidated weight.
  - AAA – [6160] Weight of goods including any packaging that normally going with the goods.
  - AAB – [6292] Weight (mass) of goods including packing but excluding the carrier's equipment.
  - AAC – Total weight of goods excluding packaging.
  - AAD – [6012] Total gross weight (mass) of all goods items referred to as one consignment including packaging but excluding any transport equipment.
  - AAF – [6048] Weight (mass) if goods without any packaging.
  - AAG – Force exerted by a thruster installed at the stern of a vessel.
  - AAH – Force exerted by a thruster installed at the bow of a vessel.
  - AAI – The hydrate content of an alcoholic product at the moment of bottling.
  - AAJ – The number of units contained on a pallet.
  - AAK – An indication of the fat content of a product.
  - AAM – [6300] The measure of the overall size of a ship determined in accordance with the provisions of the International Convention on Tonnage Measurement of Ships, 1969.
  - AAN – [6302] The measure of the useful capacity of a ship determined in accordance with the provisions of the International Convention on Tonnage Measurement of Ships, 1969.
  - AAO – Degree of moisture.
  - AAP – Electromotive force, or difference of electronic potential between two points.
  - AAQ – Value of energy consumption.
  - AAR – Measurement of the rate of dispersal of heat.
  - AAS – Measurement of the flow of air.
  - AAT – Measurement of the impact of a shock.
  - AAU – Temperature identified system or process works according to specifications.
  Showing 20 of 264 values defined for element 6313 in D14B.
- 6321 – Code specifying the significance of a measurement.
  Type: an, Max Length: 3
  Valid Codes:
  - 3 – The measurement is approximately equal to that specified.
  - 4 – The measurement is equal to that specified.
  - 5 – The measurement is greater than or equal to that specified.
  - 6 – The measurement is greater than that specified.
  - 7 – The measurement is less than that specified.
  - 8 – The measurement is less than or equal to that specified.
  - 9 – Average value for a specific series of readings.
  - 10 – The measurement is not equal to that specified.
  - 12 – The measurement reported is a true value.
  - 13 – The measurement reported is an observed value.
  - 14 – The measurement marked on the object.
  - 15 – The measurement reported is out of range.
C174 – Measurement value and relevant minimum and maximum values of the measurement range.
- 6411 – Code specifying the unit of measurement.
  Type: an, Max Length: 8 (Required)
- 6314 – To specify the value of a measurement.
  Type: an, Max Length: 18
- 6162 – To specify the minimum value of a range.
  Type: n, Max Length: 18
- 6152 – To specify the maximum value of a range.
  Type: n, Max Length: 18
- 6432 – Count of the number of significant digits.
  Type: n, Max Length: 2
6311 – Code qualifying the purpose of the measurement.
Type: an, Max Length: 3 (Required)
Valid Codes:
- AAA – Line item measurement specified by the Food and Drug Administration.
- AAB – Specified measurements refer to transport conditions for delivery to a distribution centre.
- AAC – Size of a retail container in terms of volume.
- AAD – Measurement to be used by/for other United States government agencies.
- AAE – [6314] To specify the value of a measurement.
- AAF – The measurement of a consignment or part for customs purpose.
- AAG – The measurement of the alcohol content.
- AAH – The total weight of an identified dimension.
- AAI – Weight at line item level.
- AAJ – Measurement reportable for visaed merchandise.
- AAK – Quantity to be written off from the total license amount.
- AAL – Total tonnage of cargo loaded onto the conveyance.
- AAM – Total tonnage of cargo unloaded from the conveyance.
- AAN – Tonnage of conveyance.
- AAO – Registered summer dead weight total tonnage of the vessel.
- AAP – Total weight of containerized cargo on vessel.
- AAQ – Total weight of non-containerized cargo on vessel.
- AAR – Primary reportable quantity associated with a tariff number.
- AAS – Secondary reportable quantity associated with a tariff number.
- AAT – Third reportable quantity associated with a tariff number.
Showing 20 of 103 values defined for element 6311 in D14B.
7383 – Code specifying the surface or layer of an object.
Type: an, Max Length: 3
Valid Codes:
- 1S – The location is side one.
- 2S – The location is side two.
- AA – To indicate that the entity being specified is on the surface.
- AB – To indicate that the entity being specified is off the surface.
- AC – Specifies that the surface/layer/position being described is the soluble portion.
- AD – The surface or layer of the product being described is the opposite corners.
- AE – The surface or layer of the product being described are the corner diagonals.
- AF – The left-hand side (looking forward) of a ship, boat or aircraft.
- AG – The right-hand side (looking forward) of a ship, boat or aircraft.
- AH – Surface of a tooth directed toward the face and opposite the lingual surface.
- AI – Surface of the tooth relating to the cutting edge of the anterior teeth, incisors or canines.
- AJ – Surface of the tooth toward the back of the dental arch, or away from the midline.
- AK – Surface of the tooth pertaining to or around the cheek.
- AL – Surface of the tooth pertaining to the masticating surfaces of the posterior teeth.
- AM – Surface of the tooth pertaining to or around the tongue.
- AN – Surface of the tooth toward the midline of the dental arch.
- BC – The location is at the back of the cab.
- BS – The location is both sides.
- BT – The location is on the bottom.
- DF – The location is in the dual fuel tank positions.
Showing 20 of 33 values defined for element 7383 in D14B.

CUX To specify currencies used in the transaction and relevant details for the rate of exchange. (Max 9)

C504 – The usage to which a currency relates.
- 6347 – Code qualifying the usage of a currency.
  Type: an, Max Length: 3 (Required)
  Valid Codes:
  - 1 – The currency in which charges are to be paid.
  - 2 – The currency applicable to amounts stated. It may have to be converted.
  - 3 – The currency which should be used to the target destination of the transaction.
  - 4 – Currency applicable to amounts stated in a transport document/message.
  - 5 – Currency on which the calculation is based.
  - 6 – Additional currency the message recipient needs for information purposes. The actual message amount(s) is/are not based upon this currency.
  - 7 – Currency in which the account is held.
- 6345 – Code specifying a monetary unit.
  Type: an, Max Length: 3
- 6343 – Code qualifying the type of currency.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – The currency of the monetary unit involved in the transaction for customs valuation.
  - 2 – The currency of the monetary unit involved in the transaction for insurance purposes.
  - 3 – The currency of the local monetary unit.
  - 4 – The currency of the monetary unit used for calculation in an invoice.
  - 5 – The currency of the monetary unit of an account.
  - 6 – The currency of the monetary unit to be converted from.
  - 7 – The currency of the monetary unit to be converted into.
  - 8 – The currency of the monetary unit used in a price list.
  - 9 – The currency of the monetary unit used in an order.
  - 10 – [5077] The currency of the monetary unit used for pricing purposes.
  - 11 – The currency of the monetary unit used for payment.
  - 12 – The currency of the monetary unit used in a quotation.
  - 13 – The currency of the local monetary unit at recipient's location.
  - 14 – The currency of the monetary unit normally used by the supplier.
  - 15 – The currency of the local monetary unit at sender's location.
  - 16 – The currency as per tariff.
  - 17 – The currency in which the charges are calculated.
  - 18 – The currency in which tax amounts are due or have been paid.
- 6348 – To specify the value of the multiplication factor used in expressing currency units.
  Type: n, Max Length: 4
C504 – The usage to which a currency relates.
- 6347 – Code qualifying the usage of a currency.
  Type: an, Max Length: 3 (Required)
  Valid Codes:
  - 1 – The currency in which charges are to be paid.
  - 2 – The currency applicable to amounts stated. It may have to be converted.
  - 3 – The currency which should be used to the target destination of the transaction.
  - 4 – Currency applicable to amounts stated in a transport document/message.
  - 5 – Currency on which the calculation is based.
  - 6 – Additional currency the message recipient needs for information purposes. The actual message amount(s) is/are not based upon this currency.
  - 7 – Currency in which the account is held.
- 6345 – Code specifying a monetary unit.
  Type: an, Max Length: 3
- 6343 – Code qualifying the type of currency.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – The currency of the monetary unit involved in the transaction for customs valuation.
  - 2 – The currency of the monetary unit involved in the transaction for insurance purposes.
  - 3 – The currency of the local monetary unit.
  - 4 – The currency of the monetary unit used for calculation in an invoice.
  - 5 – The currency of the monetary unit of an account.
  - 6 – The currency of the monetary unit to be converted from.
  - 7 – The currency of the monetary unit to be converted into.
  - 8 – The currency of the monetary unit used in a price list.
  - 9 – The currency of the monetary unit used in an order.
  - 10 – [5077] The currency of the monetary unit used for pricing purposes.
  - 11 – The currency of the monetary unit used for payment.
  - 12 – The currency of the monetary unit used in a quotation.
  - 13 – The currency of the local monetary unit at recipient's location.
  - 14 – The currency of the monetary unit normally used by the supplier.
  - 15 – The currency of the local monetary unit at sender's location.
  - 16 – The currency as per tariff.
  - 17 – The currency in which the charges are calculated.
  - 18 – The currency in which tax amounts are due or have been paid.
- 6348 – To specify the value of the multiplication factor used in expressing currency units.
  Type: n, Max Length: 4
5402 – To specify the rate at which one specified currency is expressed in another specified currency.
Type: n, Max Length: 12
6341 – To identify an exchange rate currency market.
Type: an, Max Length: 3
Valid Codes:
- AAA – The currency exchange rate is set by the Paris exchange.
- AAB – The currency exchange rate is set by the Central Bank of Colombia.
- AMS – The currency exchange rate is set by the Amsterdam exchange.
- ARG – Argentina exchange.
- AST – The currency exchange rate is set by the Australian exchange.
- AUS – Wiener Boersenkammer.
- BEL – Commission de la Bourse Bruxelles.
- CAN – The currency exchange rate is set by the Toronto exchange.
- CAR – The currency exchange rate is set by a written or spoken agreement between two or more parties.
- CIE – Currency rates published by the US Customs Information Exchange, 6 WTC, New York NY 10048-0945, USA.
- DEN – Koebenhavns Fondsboers.
- ECR – The currency exchange rate is set for a length of time by the European Community.
- FIN – The currency exchange rate is set by the Helsinki exchange.
- FRA – The currency exchange rate is set by the Frankfurt exchange.
- IMF – The currency exchange rate is set by the International Monetary Fund.
- LNF – The currency exchange rate is set by the London exchange at the first closing.
- LNS – The currency exchange rate is set by the London exchange at the second closing.
- MIL – The currency exchange rate is set by the Milan exchange.
- NOR – The currency exchange rate is set by the Oslo exchange.
- NYC – The currency exchange rate is set by the New York exchange.
Showing 20 of 24 values defined for element 6341 in D14B.

Group SG1 (Max 10)

RFF To specify a reference. (Max 1) Required

C506 – Identification of a reference.
- 1153 – Code qualifying a reference.
  Type: an, Max Length: 3 (Required)
  Valid Codes:
  - AAA – [1018] Reference number identifying the acknowledgement of an order.
  - AAB – [1088] Reference number to identify a proforma invoice.
  - AAC – [1172] Reference number to identify a documentary credit.
  - AAD – [1318] Reference number to identify an addendum to a contract.
  - AAE – Reference number assigned to a goods declaration.
  - AAF – A reference number identifying a debit card.
  - AAG – (1332) Reference number assigned by issuing party to an offer.
  - AAH – Reference number allocated by the bank to a batch of different underlying interbank transactions.
  - AAI – Reference number allocated by the bank to one specific interbank transaction.
  - AAJ – Reference number assigned by issuer to a delivery order.
  - AAK – [1035] Reference number assigned by issuing party to a despatch advice.
  - AAL – Reference number identifying a specific product drawing.
  - AAM – Reference number assigned to a waybill, see: 1001 = 700.
  - AAN – Reference number assigned by buyer to a delivery schedule.
  - AAO – [1362] Reference number assigned by the consignee to identify a particular consignment.
  - AAP – [1310] Identifier of a shipment which is part of an order.
  - AAQ – [8260] To identify a piece if transport equipment e.g. container or unit load device.
  - AAR – A reference number assigned by a municipality to identify a business.
  - AAS – [1188] Reference number to identify a document evidencing a transport contract.
  - AAT – Identifies the master label number of any package type.
  Showing 20 of 787 values defined for element 1153 in D14B.
- 1154 – Identifies a reference.
  Type: an, Max Length: 70
- 1156 – To identify a line of a document.
  Type: an, Max Length: 6
- 1056 – To identify a version.
  Type: an, Max Length: 9
- 1060 – To identify a revision.
  Type: an, Max Length: 6

DTM To specify date, and/or time, or period. (Max 5)

Elements and codes as defined at DTM above.

Group SG2 (Max 10)

NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required

C082 – Identification of a transaction party by code.
- 3039 – Code specifying the identity of a party.
  Type: an, Max Length: 35 (Required)
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 398 values defined for element 3055 in D14B.
C058 – Unstructured name and address: one to five lines.
- 3124 – Free form description of a name and address line.
  Type: an, Max Length: 35 (Required)
- 3124 – Free form description of a name and address line.
  Type: an, Max Length: 35
- 3124 – Free form description of a name and address line.
  Type: an, Max Length: 35
- 3124 – Free form description of a name and address line.
  Type: an, Max Length: 35
- 3124 – Free form description of a name and address line.
  Type: an, Max Length: 35
C080 – Identification of a transaction party by name, one to five lines. Party name may be formatted.
- 3036 – Name of a party.
  Type: an, Max Length: 70 (Required)
- 3036 – Name of a party.
  Type: an, Max Length: 70
- 3036 – Name of a party.
  Type: an, Max Length: 70
- 3036 – Name of a party.
  Type: an, Max Length: 70
- 3036 – Name of a party.
  Type: an, Max Length: 70
- 3045 – Code specifying the representation of a party name.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Name component 1: Family name. Name component 2: Given name or initials. Name component 3: Given name or initials. Name component 4: Maiden name. Name component 5: Title Group of name components transmitted in sequence with name component 1 transmitted first. The maiden name is the family name given at birth of a female. Other names are self-explanatory.
  - 2 – Name component 1: paternal name; name component 2: maternal name; name component 3: given name or initial(s); name component 4: middle name or initial(s); name component 5: name suffix.
  - 3 – Name component 1: Qualification Name component 2: First part of the name Name component 3: Second part of the name.
C059 – Street address and/or PO Box number in a structured address: one to four lines.
- 3042 – To identify a street and number and/or Post Office box number.
  Type: an, Max Length: 35 (Required)
- 3042 – To identify a street and number and/or Post Office box number.
  Type: an, Max Length: 35
- 3042 – To identify a street and number and/or Post Office box number.
  Type: an, Max Length: 35
- 3042 – To identify a street and number and/or Post Office box number.
  Type: an, Max Length: 35
C819 – To specify a country subdivision, such as state, canton, county, prefecture.
- 3229 – To identify a country subdivision, such as state, canton, county, prefecture.
  Type: an, Max Length: 9
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 398 values defined for element 3055 in D14B.
- 3228 – Name of a country subdivision, such as state, canton, county, prefecture.
  Type: an, Max Length: 70
3035 – Code giving specific meaning to a party.
Type: an, Max Length: 3 (Required)
Valid Codes:
- AA – Party to be billed in accordance with AAR Accounting rule 11.
- AB – Third party who arranged the purchase of merchandise on behalf of the actual buyer.
- AE – Any natural or legal person who makes a declaration to an official body on behalf of another natural or legal person, where legally permitted (CCC).
- AF – Natural or legal person responsible for the satisfactory performance of a Customs transit operation. Source: CCC.
- AG – (3196) Party authorized to act on behalf of another party. Synonym: Representative.
- AH – Agent acting on behalf of the transit principal (CCC).
- AI – Person who has been chosen for a job.
- AJ – The party which has issued all mutually agreed codes used in the message.
- AK – Party to whom acknowledgement should be sent.
- AL – (3340) Party accepting liability for goods held or moving (e.g. transit) under a Customs authorization and - when applicable - a guarantee.
- AM – Employee of a company or firm authorized to act on behalf of that company or firm e.g. to make a Customs declaration.
- AN – Person or company which is authorised by the relevant Customs authority to import goods without payment all taxes or specific taxes at the point of entry into the country.
- AO – Party account is assigned to.
- AP – (3336) Party accepting goods, products, services, etc.
- AQ – Person or company approved by the relevant authority in the country to pack and export specific goods under Customs supervision.
- AR – Exporter authorized/approved by Customs for special Customs procedures e.g. simplified procedure.
- AS – Identifies the financial institution servicing the account(s).
- AT – Importer authorized/approved by Customs for special Customs procedures e.g. simplified procedure.
- AU – Trader authorized/approved by Customs for special transit procedures e.g. simplified procedure.
- AV – Party that has delegated the authority to take a certain action on behalf of a company or agency.
Showing 20 of 595 values defined for element 3035 in D14B.
3164 – Name of a city.
Type: an, Max Length: 35
3251 – Code specifying the postal zone or address.
Type: an, Max Length: 17
3207 – Identification of the name of the country or other geographical entity as defined in ISO 3166-1 and UN/ECE Recommendation 3.
Type: an, Max Length: 3

LOC To identify a place or a location and/or related locations. (Max 10)

C517 – Identification of a location by code or name.
- 3225 – To identify a location.
  Type: an, Max Length: 35
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 398 values defined for element 3055 in D14B.
- 3224 – Name of the location.
  Type: an, Max Length: 256
C519 – Identification the first related location by code or name.
- 3223 – To identify a first related location.
  Type: an, Max Length: 35
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 398 values defined for element 3055 in D14B.
- 3222 – Name of first related location.
  Type: an, Max Length: 70
C553 – Identification of second related location by code or name.
- 3233 – To identify a second related location.
  Type: an, Max Length: 35
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 398 values defined for element 3055 in D14B.
- 3232 – Name of the second related location.
  Type: an, Max Length: 70
3227 – Code identifying the function of a location.
Type: an, Max Length: 3 (Required)
Valid Codes:
- 1 – (3018) Point or port of departure, shipment or destination, as required under the applicable terms of delivery, e.g. Incoterms.
- 2 – [3109] To identify the place where the payment has been or should be made.
- 3 – Place where equipment tare has been or must be checked for official assessment.
- 4 – [3160] Place at which the goods have been received.
- 5 – (3214) Port, airport or other location from which a means of transport or transport equipment is scheduled to depart or has departed.
- 6 – A bed in a ward.
- 7 – (3246) Place to which the goods are to be finally delivered under transport contract terms (operational term).
- 8 – (3258) Port, airport or other location to which a means of transport or transport equipment is destined.
- 9 – [3334] Seaport, airport, freight terminal, rail station or other place at which the goods (cargo) are loaded on to the means of transport being used for their carriage.
- 10 – [3348] Place where the goods are taken over by the carrier.
- 11 – [3392] Seaport, airport, freight terminal, rail station or other place at which goods are unloaded from the means of transport having been used for their carriage.
- 12 – Port at which the goods are discharged from the vessel used for their transport.
- 13 – [3424] Place where goods are to be or have been transferred from one means of transport to another during the course of one transport operation.
- 14 – [3385] To identify the place where a goods item is located.
- 15 – Place where the responsibility is transferred.
- 16 – Place where the ownership of the goods is transferred.
- 17 – Place where goods are transported across a country border.
- 18 – [3156] Warehouse where a particular consignment is to be or has been stored.
- 19 – Factory/plant relevant for a particular consignment.
- 20 – Place where goods will ultimately be delivered.
Showing 20 of 298 values defined for element 3227 in D14B.
5479 – Code specifying a relation.
Type: an, Max Length: 3

Group SG3 (Max 10)

RFF To specify a reference. (Max 1) Required

Elements and codes as defined at RFF above.

DTM To specify date, and/or time, or period. (Max 5)

Elements and codes as defined at DTM above.

Group SG4 (Max 10)

CTA To identify a person or a department to whom communication should be directed. (Max 1) Required

C056 – Code and/or name of a contact such as a department or employee. Code preferred.
- 3413 – To identify a contact, such as a department or employee.
  Type: an, Max Length: 17
- 3412 – Name of a contact, such as a department or employee.
  Type: an, Max Length: 256
3139 – Code specifying the function of a contact (e.g. department or person).
Type: an, Max Length: 3
Valid Codes:
- AA – Department/person to contact for matters regarding insurance.
- AB – Department/person to contact for matters regarding the workshop.
- AC – Department/person in charge of accepting incoming goods.
- AD – The contact responsible for accounting matters.
- AE – Department/person to contact for matters regarding contracts.
- AF – Department/person to contact for matters regarding land registry.
- AG – Department/person of the agent which acts on behalf of another party.
- AH – Department/person to contact for matters regarding technical coordination of works.
- AI – Department/person to contact for matters regarding project management on behalf of the contractor.
- AJ – Department/person to contact for matters regarding investments.
- AK – Department/person to contact for matters regarding management of works on behalf of the owner.
- AL – Department/person to contact for matters regarding personnel (human resources).
- AM – Department/person to contact for matters regarding claims.
- AN – Department/person to contact for laboratory matters.
- AO – Department/person to contact for matters regarding plant/equipment.
- AP – Department/person responsible for the accounts payable function within a corporation.
- AQ – Department/person to contact for matters regarding quantity surveying.
- AR – Department/person responsible for the accounts receivable within a corporation.
- AS – Department/person to contact for matters regarding public relations.
- AT – Department/person to contact for matters regarding technical issues.
Showing 20 of 99 values defined for element 3139 in D14B.

COM To identify a communication number of a department or a person to whom communication should be directed. (Max 5)

C076 – Communication number of a department or employee in a specified channel.
- 3148 – To identify a communication address.
  Type: an, Max Length: 512 (Required)
- 3155 – Code specifying the type of communication address.
  Type: an, Max Length: 3 (Required)
  Valid Codes:
  - AA – A process that, on demand, connects two or more data terminal equipments and permits the exclusive use of a data circuit between them until the connection is released (ISO).
  - AB – Communications number assigned by Societe Internationale de Telecommunications Aeronautiques (SITA).
  - AC – Communications number assigned by Aeronautical Radio Inc.
  - AD – AT&T mailbox identifier.
  - AE – Peripheral device identification.
  - AF – The switched telecommunications network of the United States Department of Defense.
  - AG – The switched telecommunications network of the United States government.
  - AH – Data exchange via the World Wide Web.
  - AI – Identifies that portion of an international telephone number representing the country code to be used when calling internationally.
  - AJ – Identifies the alternate telephone number.
  - AK – Code that identifies the communications number for the online videotex service.
  - AL – Identifies the cellular phone number.
  - AM – The international telephone direct line number.
  - AN – ODETTE File Transfer Protocol.
  - AO – Identification of the Uniform Resource Location (URL) Synonym: World wide web address.
  - AP – VHF radio telephone.
  - AQ – The X.400 address accepting information in the body text of a message.
  - AR – Address capable of receiving messages in accordance with the EDIINT/AS1 protocol for MIME based EDI .
  - AS – Address capable of receiving messages in accordance with the EDIINT/AS2 protocol.
  - AT – Address capable of receiving messages in accordance with the EDIINT/AS3 protocol.
  Showing 20 of 47 values defined for element 3155 in D14B.

Group SG5 (Max 10)

TDT To specify information regarding the transport such as mode of transport, means of transport, its conveyance reference number and the identification of the means of transport. (Max 1) Required

C220 – Method of transport code or name. Code preferred.
- 8067 – Code specifying the name of a mode of transport.
  Type: an, Max Length: 3
- 8066 – Name of a mode of transport.
  Type: an, Max Length: 17
C001 – Code and/or name identifying the type of means of transport.
- 8179 – Code specifying the means of transport.
  Type: an, Max Length: 8
  Valid Codes:
  - 1 – Tricycle with a basket for delivering goods.
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 398 values defined for element 3055 in D14B.
- 8178 – Free form description of the means of transport.
  Type: an, Max Length: 17
C040 – Identification of a carrier by code and/or by name. Code preferred.
- 3127 – To identify a carrier.
  Type: an, Max Length: 17
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 398 values defined for element 3055 in D14B.
- 3126 – Name of a carrier.
  Type: an, Max Length: 35
C401 – To provide details of reason for, and responsibility for, use of transportation other than normally utilized.
- 8457 – Code specifying the reason for excess transportation.
  Type: an, Max Length: 3 (Required)
  Valid Codes:
  - A – The reason for the excess transportation is due to special rail car order, schedule increase forecast change.
  - B – The reason for the excess transportation is due to engineering change or late release.
  - C – The reason for the excess transportation is due to special rail car order, schedule increase forecast change specification (schedule) error/overbuilding.
  - D – The reason for the excess transportation is due to shipment tracing delay.
  - E – The reason for the excess transportation is due to plant inventory loss.
  - F – The reason for the excess transportation is due to building ahead of schedule.
  - G – The reason for the excess transportation is due to vendor behind schedule.
  - H – The reason for the excess transportation is due to failure to include costs in last shipment.
  - I – The reason for the excess transportation is due to carrier loss claim.
  - J – The reason for the excess transportation is due to transportation failure.
  - K – The reason for the excess transportation is due to insufficient weight for carload.
  - L – The reason for the excess transportation is due to reject or discrepancy.
  - M – The reason for the excess transportation is due to transportation delay.
  - N – The reason for the excess transportation is due to lack of railcar of railroad equipment.
  - P – The reason for the excess transportation is due to releasing error.
  - R – The reason for the excess transportation is due to record error or cate reported discrepancy report.
  - T – The reason for the excess transportation is due to common or peculiar part schedule increase.
  - U – The reason for the excess transportation is due to alternative supplier shipping for responsible supplier.
  - V – The reason for the excess transportation is due to direct schedule or locally controlled.
  - W – The reason for the excess transportation is due to purchasing waiver approved.
  Showing 20 of 23 values defined for element 8457 in D14B.
- 8459 – Code specifying the responsibility for excess transportation.
  Type: an, Max Length: 3 (Required)
  Valid Codes:
  - B – The responsibility for excess transportation is with the material release issuer.
  - S – The responsibility for excess transportation is with the supplier authority.
  - X – The responsibility for the excess transportation is to be determined.
  - ZZZ – A code assigned within a code list to be used on an interim basis and as defined among trading partners until a precise code can be assigned to the code list.
- 7130 – To identify the authorisation to ship issued by the customer.
  Type: an, Max Length: 17
C222 – Code and/or name identifying the means of transport.
- 8213 – Identifies the name of the transport means.
  Type: an, Max Length: 35
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 398 values defined for element 3055 in D14B.
- 8212 – Name identifying a means of transport.
  Type: an, Max Length: 70
- 8453 – Code specifying the nationality of a means of transport.
  Type: an, Max Length: 3
C003 – To specify the type of power.
- 7041 – Code indicating the type of power.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – The power type is diesel.
  - 2 – The power type is both diesel and electric.
  - 3 – The power type is electric.
  - 4 – The power type is Liquid Propane Gas.
  - 5 – The power type is petrol.
  - 6 – The power type is both petrol and electric.
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 398 values defined for element 3055 in D14B.
- 7040 – Description of the type of power.
  Type: an, Max Length: 17
8051 – Code qualifying a specific stage of transport.
Type: an, Max Length: 3 (Required)
Valid Codes:
- 1 – Transport by which goods are moved from or to the frontier, or between inland points.
- 2 – Point by which the means of transport are presumed to have left the statistical territory of despatch or to have entered the statistical territory of arrival.
- 3 – Transport by which goods are moved to the place of arrival.
- 4 – The means of transport used to carry goods that have come under transit procedures of the customs administration to which a transit declaration is being made.
- 5 – The means of transport moving into and out of a regulatory territory.
- 6 – The means of transport moving into a regulatory territory at the first port of arrival.
- 10 – Transport by which the goods are moved prior to their main carriage transport.
- 11 – Transport by which goods are moved to the Customs frontier.
- 12 – Transport by which goods are moved from the place of departure.
- 13 – Transport by which goods are moved at the place of destination.
- 15 – The fourth carrier of the ordered transport.
- 16 – The fifth carrier of the ordered transport.
- 17 – The sixth carrier of the ordered transport.
- 18 – The seventh carrier of the ordered transport.
- 19 – The eighth carrier of the ordered transport.
- 20 – The primary stage in the movement of cargo from the point of origin to the intended destination.
- 21 – The first carrier of the ordered transport when more than one carrier is involved.
- 22 – The second carrier of the ordered transport when more than one carrier is involved.
- 23 – The third carrier of the ordered transport when more than one carrier is involved.
- 24 – Transport by which goods are moved via an inland body of water.
Showing 20 of 30 values defined for element 8051 in D14B.
8028 – To identify a journey of a means of transport.
Type: an, Max Length: 17
8101 – Code specifying the direction of transport.
Type: an, Max Length: 3
Valid Codes:
- BS – The transport from the buyer to the seller.
- SB – The transport from the seller to the buyer.
- SC – The transport from the subcontractor to the seller.
- SD – The transport from the seller to the drop ship designated location.
- SF – The transport from the seller to the freight forwarder.
- SS – The transport from the seller to the subcontractor.
- ST – Cargo is transferred from the main carriage or mother vessel to a lighter.
- SU – Cargo is transferred from the lighter vessel to a main carriage or mother vessel.
- ZZZ – A code assigned within a code list to be used on an interim basis and as defined among trading partners until a precise code can be assigned to the code list.
8281 – Code indicating the ownership of a means of transport.
Type: an, Max Length: 3
Valid Codes:
- 1 – The owner of the transported goods is also the owner of the means of transport or rented it for this transport.
- 2 – The owner of the transported goods does not own the means of transport or has not rented it for this transport.
- 3 – A code indicating privately owned transport.

PCD To specify percentage information. (Max 5)

C501 – Percentage relating to a specified basis.
- 5245 – Code qualifying the type of percentage.
  Type: an, Max Length: 3 (Required)
  Valid Codes:
  - 1 – (5044) Allowance expressed as a percentage.
  - 2 – (5044) Charge expressed as a percentage.
  - 3 – [5044] Specification of any additional charges, dues or deductions, expressed as a percentage.
  - 4 – To indicate the share of the reinsurer in a treaty.
  - 5 – To indicate the percentage used for the specified entry (e.g. commission %, deposits % ...).
  - 6 – (5482) The percentage of specified material in the total product.
  - 7 – Code specifying the percentage of invoice.
  - 8 – Percentage to calculate a reduction/surcharge.
  - 9 – Code specifying the adjustment expressed as a percentage.
  - 10 – London insurance market bureau (bureau share in reinsurance treaty).
  - 11 – Anticipated additional consumption to safeguard against unforeseen shortages or demands.
  - 12 – Discount expressed as a percentage.
  - 13 – Tolerance of amount in percentage.
  - 14 – Percentage of debit or credit note.
  - 15 – Code specifying the penalty percentage.
  - 16 – Code specifying the interest percentage.
  - 17 – Part of documentary credit amount in percentage subject to sight payment, deferred payment or acceptance when the documentary credit is available by mixed payment.
  - 18 – Percentage of a credit note.
  - 19 – Percentage of a debit note.
  - 20 – Code specifying the percentage of insurance.
  Showing 20 of 161 values defined for element 5245 in D14B.
- 5482 – To specify a percentage.
  Type: n, Max Length: 10
- 5249 – Code specifying the basis on which a percentage is calculated.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Referenced percentage applies on a single unit basis.
  - 2 – Reduction percentage is applied per transported ton.
  - 3 – Reduction percentage is applied per main equipment unit (for rail purpose, only rail wagons).
  - 4 – Reduction percentage is applied on the unit price, which is the basis of the charge calculation.
  - 5 – Reduction percentage applied on the unit price and conceded to a consignor after he reached a specified tonnage of transport.
  - 6 – Code to indicate that the IATA experimental special charge within Europe is the basis for the percentage reduction or surcharge.
  - 7 – Code to indicate that the IATA experimental special rate within in Europe is the basis for the percentage reduction or surcharge.
  - 8 – Code to indicate that the IATA minimum charge is the basis for the percentage reduction or surcharge.
  - 9 – Code to indicate that the IATA normal rate is the basis for the percentage reduction or surcharge.
  - 10 – Code to indicate that the IATA quantity rate is the basis for the percentage reduction or surcharge.
  - 11 – Referenced percentage applies on the amount of drawing under the documentary credit.
  - 12 – Referenced percentage applies on documentary credit amount.
  - 13 – Referenced percentage applies on the invoice value.
  - 14 – Referenced percentage applies on CIF value.
  - 15 – The percentage applied to the contract cost.
  - 16 – The percentage applied to the labour hours.
  - 17 – The percentage basis is London Inter-Bank Offered Rate (LIBOR).
  - 18 – The percentage basis is Frankfurt Inter-Bank Offered Rate (FIBOR).
  - 19 – The percentage basis is Paris Inter-Bank Offered Rate (PIBOR).
  - 20 – The percentage basis is nationally based.
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 398 values defined for element 3055 in D14B.
4405 – Code specifying a status.
Type: an, Max Length: 3
Valid Codes:
- 1 – Remark that the requested service in the order remains outstanding.
- 2 – The instruction has been completed.
- 3 – The information has been passed on.
- 4 – The amount has the status of finality.
- 5 – The amount is subject to finality.
- 6 – The amount quoted is a minimum tariff.
- 7 – The amount quoted is a fixed tariff.
- 8 – The amount quoted is a maximum tariff.
- 9 – The amount is quoted for information only, it is not part of the charges to be deducted or added.
- 10 – The amount is available today.
- 11 – The amount is available on the next banking office day after the booking date.
- 12 – The amount is available on the second banking office day after the booking date.
- 13 – The amount available on the third banking office day after the booking date.
- 14 – Funds not collected by beneficiary.
- 15 – The amount or quantity is zero.
- 16 – No status or condition has been advised.
- 17 – A status or condition has been requested.
- 18 – No charge is to be made.
- 19 – The quantity has been the subject of a rounding operation.
- 20 – Intended to last or function indefinitely.
Showing 20 of 145 values defined for element 4405 in D14B.

Group SG6 (Max 10)

LOC To identify a place or a location and/or related locations. (Max 1) Required

Elements and codes as defined at LOC above.

DTM To specify date, and/or time, or period. (Max 10)

Elements and codes as defined at DTM above.

Group SG7 (Max 10)

EQD To identify a unit of equipment. (Max 1) Required

C237 – Marks (letters/numbers) identifying equipment.
- 8260 – To identify equipment.
  Type: an, Max Length: 17
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 398 values defined for element 3055 in D14B.
- 3207 – Identification of the name of the country or other geographical entity as defined in ISO 3166-1 and UN/ECE Recommendation 3.
  Type: an, Max Length: 3
C224 – Code and or name identifying size and type of equipment. Code preferred.
- 8155 – Code specifying the size and type of equipment.
  Type: an, Max Length: 10
  Valid Codes:
  - 1 – A tank coated with dime.
  - 2 – A tank coated with epoxy.
  - 6 – A tank capable of holding pressurized goods.
  - 7 – A tank capable of keeping goods refrigerated.
  - 9 – A tank made of stainless steel.
  - 10 – A 40 foot refrigerated container that is not actively controlling temperature of the product.
  - 12 – 80 x 120 cm.
  - 13 – 100 x 120 cm.
  - 14 – Non self-propelled vehicle designed for the carriage of cargo so that it can be towed by a motor vehicle.
  - 15 – A 20 foot refrigerated container that is not actively controlling temperature of the product.
  - 16 – Standard pallet exchangeable following international convention.
  - 17 – Non self propelled vehicle without front wheels designed for the carriage of cargo and provided with a kingpin.
  - 18 – A tank container with a length of 20 feet.
  - 19 – A tank container with a length of 30 feet.
  - 20 – A tank container with a length of 40 feet.
  - 21 – A container owned by InterContainer, a European railway subsidiary, with a length of 20 feet.
  - 22 – A container owned by InterContainer, a European railway subsidiary, with a length of 30 feet.
  - 23 – A container owned by InterContainer, a European railway subsidiary, with a length of 40 feet.
  - 24 – A refrigerated tank with a length of 20 feet.
  - 25 – A refrigerated tank with a length of 30 feet.
  Showing 20 of 40 values defined for element 8155 in D14B.
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 398 values defined for element 3055 in D14B.
- 8154 – Free form description of the size and type of equipment.
  Type: an, Max Length: 35
8053 – Code qualifying a type of equipment.
Type: an, Max Length: 3 (Required)
Valid Codes:
- AA – Ground equipment being fuelled or serviced.
- AB – Chain used in the securing of cargo.
- AD – Temperature recorder to provide a record of the actual temperature.
- AE – The part of the vehicle where the cargo is loaded.
- AG – A cardboard platform used for holding product for storage or transportation.
- AH – A code to indicate that there is no special equipment needed.
- AI – A compartment forming part of a transport vessel.
- AJ – Type of open container used for carrying objects.
- AK – To indicate that the equipment is an aircraft.
- AL – A device used for medical purposes.
- AM – A refrigerated (reefer) container that is actively cooling the product.
- AN – A pallet with standard dimensions 80*120 centimetres made of synthetic material.
- AO – A standard pallet with standard dimensions 100*120 centimetres made of synthetic material.
- AP – Equipment used to store and transport clothing in a hanging position.
- AQ – Trailer designated for combined road/rail use.
- AT – Empty rail wagon added to the loaded wagons, when goods are longer than the loaded wagon.
- BB – Cargoes in bulk not stuffed in equipment.
- BL – A piece of equipment that is normally a piece of wood to fix cargo (e.g. coils) during transport.
- BPN – A box pallet which cannot be exchanged.
- BPO – A road vehicle capable of carrying goods which is being carried on another means of transport.
Showing 20 of 73 values defined for element 8053 in D14B.
8077 – Code specifying the party that is the supplier of the equipment.
Type: an, Max Length: 3
Valid Codes:
- 1 – The transport equipment is supplied by the shipper.
- 2 – The transport equipment is supplied by the carrier.
- 3 – The equipment is supplied by the consolidator.
- 4 – The equipment is supplied by the deconsolidator.
- 5 – The equipment is supplied by a third party.
- 6 – The equipment is supplied by the forwarder and is taken from a leasing company.
- 7 – The equipment is supplied by the forwarder and is taken from a pool established by railway companies.
8249 – Code specifying the status of equipment.
Type: an, Max Length: 3
Valid Codes:
- 1 – The equipment is or will be moving across a continent on an intermodal or multimodal basis.
- 2 – Transport equipment to be exported on a marine vessel.
- 3 – Transport equipment to be imported on a marine vessel.
- 4 – Transport equipment arriving on a marine vessel is to remain on board.
- 5 – Transport equipment is to be shifted from one stowage location on a marine vessel to another on the same vessel.
- 6 – Transport equipment is to be transferred from one marine vessel to another.
- 7 – Transport equipment notified to arrive which did not arrive on the means of transport.
- 8 – Transport equipment not notified to arrive but which did arrive on the means of transport.
- 9 – Transport equipment is used in domestic service.
- 10 – Equipment is being transported for positioning purposes.
- 11 – Equipment is being delivered.
- 12 – Equipment is being redelivered.
- 13 – The equipment is for repair.
- 14 – Transport equipment to be discharged and subsequently reloaded on the same means of transport but in a different stowage location.
- 15 – The equipment is returned.
- 16 – The equipment is dropped off.
- 17 – The transport equipment that is unloaded will be loaded in another vessel at another terminal in the same port.
- 18 – Notification of the confirmation of booking of a transport equipment.
- 19 – Notification that a transport equipment has undergone a terminal gate inspection.
- 20 – Notification that a transport equipment arrived at the offloading location.
Showing 20 of 29 values defined for element 8249 in D14B.
8169 – Code indicating whether an object is full or empty.
Type: an, Max Length: 3
Valid Codes:
- 1 – Indicates that there is more than a quarter of the volume available.
- 2 – Indicates that there is more than a half of the volume available.
- 3 – Indicates that there is more than three quarters of the volume available.
- 4 – Indicates that the object is empty.
- 5 – Indicates that the object is full.
- 6 – Indicates that there is no space available in the object.
- 7 – Indicates that the equipment is fully loaded, and includes a number LCL (Less Than Container Load) consignments.
- 8 – Indicates that the container is fully loaded with a single FCL (Full Container Load) consignment.
- 9 – Container represents part of a consignment declared on a single Customs declaration (i.e. the Customs declaration covers more than one container).
- 10 – Container represents part of the consignment declared on a single Customs declaration with the remainder being in other containers. Other goods, related to other declarations, are also in the container.
- 11 – Merchandise within a container/package covered by a single invoice.
- 12 – Merchandise within a container/package covered by more than one invoice.
- 13 – A container representing a consignment of goods for one consignee with multiple bill of lading numbers.
4233 – Code specifying instructions for marking.
Type: an, Max Length: 3
Valid Codes:
- 1 – Packaging should not be marked with supplier's company name.
- 2 – Packaging should be marked with customer's company name.
- 3 – Packaging should be marked with customer's references.
- 4 – Packaging should also be marked with customer's article description.
- 5 – Packaging should be marked with customer's article description only.
- 6 – Packaging should be marked with package's dimensions.
- 7 – Packaging should be marked with net weight.
- 8 – Packaging should be marked with gross weight.
- 9 – Packaging should be marked with tare weight.
- 10 – Packaging should be marked with batch number.
- 11 – Packaging should be marked with customer's article number.
- 12 – Packaging should be marked with the running number of packages.
- 13 – Packaging should be marked with the date of production.
- 14 – Packaging should be marked with the expiry date.
- 15 – Packaging should be marked with the supplier number.
- 16 – Markings as specified by the buyer.
- 17 – Markings as specified by the seller.
- 18 – Markings as specified by carrier.
- 19 – Markings as specified by law.
- 20 – Markings as specified by industry.
Showing 20 of 38 values defined for element 4233 in D14B.

MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 5)

Elements and codes as defined at MEA above.

SEL To specify the seal number or a range of seal numbers. (Max 99)

C215 – Identification of the issuer of a seal on equipment either by code or by name.
- 9303 – Code specifying the name of the sealing party.
  Type: an, Max Length: 3
  Valid Codes:
  - AA – Party which consolidates cargo.
  - AB – The sealing party is unknown.
  - AC – Agency responsible for the administration of statutory disease controls on the movement of people, animals and plants.
  - CA – Party undertaking or arranging transport of goods between named points.
  - CU – 'Customs' means the Government Service which is responsible for the administration of Customs law and the collection of duties and taxes and which also has the responsibility for the application of other laws and regulations relating to the importation, exportation, movement or storage of goods.
  - SH – Party which, by contract with a carrier, consigns or sends goods with the carrier, or has them conveyed by him.
  - TO – Party which handles the loading and unloading of marine vessels.
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 398 values defined for element 3055 in D14B.
- 9302 – Name of the sealing party.
  Type: an, Max Length: 35
C208 – Goods item identification numbers, start and end of consecutively numbered range.
- 7402 – Code specifying the unique identity of an object.
  Type: an, Max Length: 35 (Required)
- 7402 – Code specifying the unique identity of an object.
  Type: an, Max Length: 35
9308 – The identification number of a seal affixed to a transport unit.
Type: an, Max Length: 35
4517 – Code specifying the condition of a seal.
Type: an, Max Length: 3
Valid Codes:
- 1 – The seal is in right condition.
- 2 – The seal is damaged.
- 3 – A seal that is missing.
- 4 – Used to specify that the seal is broken.
- 5 – The electronic seal is faulty.
4525 – To specify a type of seal.
Type: an, Max Length: 3
Valid Codes:
- 1 – The seal is mechanical.
- 2 – The seal is electronic.
- 3 – The seal is for sealing an air fresh vent.

EQA To specify attached or related equipment. (Max 5)

C237 – Marks (letters/numbers) identifying equipment.
- 8260 – To identify equipment.
  Type: an, Max Length: 17
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 398 values defined for element 3055 in D14B.
- 3207 – Identification of the name of the country or other geographical entity as defined in ISO 3166-1 and UN/ECE Recommendation 3.
  Type: an, Max Length: 3
8053 – Code qualifying a type of equipment.
Type: an, Max Length: 3 (Required)
Valid Codes:
- AA – Ground equipment being fuelled or serviced.
- AB – Chain used in the securing of cargo.
- AD – Temperature recorder to provide a record of the actual temperature.
- AE – The part of the vehicle where the cargo is loaded.
- AG – A cardboard platform used for holding product for storage or transportation.
- AH – A code to indicate that there is no special equipment needed.
- AI – A compartment forming part of a transport vessel.
- AJ – Type of open container used for carrying objects.
- AK – To indicate that the equipment is an aircraft.
- AL – A device used for medical purposes.
- AM – A refrigerated (reefer) container that is actively cooling the product.
- AN – A pallet with standard dimensions 80*120 centimetres made of synthetic material.
- AO – A standard pallet with standard dimensions 100*120 centimetres made of synthetic material.
- AP – Equipment used to store and transport clothing in a hanging position.
- AQ – Trailer designated for combined road/rail use.
- AT – Empty rail wagon added to the loaded wagons, when goods are longer than the loaded wagon.
- BB – Cargoes in bulk not stuffed in equipment.
- BL – A piece of equipment that is normally a piece of wood to fix cargo (e.g. coils) during transport.
- BPN – A box pallet which cannot be exchanged.
- BPO – A road vehicle capable of carrying goods which is being carried on another means of transport.
Showing 20 of 73 values defined for element 8053 in D14B.

PCD To specify percentage information. (Max 5)

Elements and codes as defined at PCD above.

Group SG8 (Max 10)

HAN To specify handling and where necessary, notify hazards. (Max 1) Required

C524 – Instruction for the handling of goods, products or articles in shipment, storage etc.
- 4079 – Code specifying a handling instruction.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – The object is heat sensitive.
  - 2 – The object must be stored in dry environment.
  - 3 – The identified item is, or can be stacked.
  - 4 – Request to arrange boatmen to (de)moor the vessel at the berth.
  - 5 – Information that the boatmen to (de)moor the vessel at the berth are already arranged.
  - 6 – Request to arrange the pilotage for the vessel.
  - 7 – Information that pilotage for the vessel is already arranged.
  - 8 – Request to arrange the towage for the vessel to/from the berth in the port.
  - 9 – Request to arrange the disposal of waste.
  - 10 – The consignment has to be transshipped.
  - 11 – Item must be refrigerated for proper handling.
  - 12 – Item does not need to be refrigerated for proper handling.
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 398 values defined for element 3055 in D14B.
- 4078 – Free form description of a handling instruction.
  Type: an, Max Length: 512
C218 – To specify a hazardous material.
- 7419 – Code specifying a kind of hazard for a material.
  Type: an, Max Length: 7
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 398 values defined for element 3055 in D14B.
- 7418 – Name of a kind of hazard for a material.
  Type: an, Max Length: 35

FTX To provide free form or coded text information. (Max 10)

C107 – Coded reference to a standard text and its source.
- 4441 – Code specifying free form text.
  Type: an, Max Length: 17 (Required)
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 398 values defined for element 3055 in D14B.
C108 – Free text; one to five lines.
- 4440 – Free form text.
  Type: an, Max Length: 512 (Required)
- 4440 – Free form text.
  Type: an, Max Length: 512
- 4440 – Free form text.
  Type: an, Max Length: 512
- 4440 – Free form text.
  Type: an, Max Length: 512
- 4440 – Free form text.
  Type: an, Max Length: 512
4451 – Code qualifying the subject of the text.
Type: an, Max Length: 3 (Required)
Valid Codes:
- AAA – [7002] Plain language description of the nature of a goods item sufficient to identify it for customs, statistical or transport purposes.
- AAB – [4276] Free form description of the conditions of payment between the parties to a transaction.
- AAC – [7488] Additional information concerning dangerous substances and/or article in a consignment.
- AAD – [7254] Proper shipping name, supplemented as necessary with the correct technical name, by which a dangerous substance or article may be correctly identified, or which is sufficiently informative to permit identification by reference to generally available literature.
- AAE – The content of an acknowledgement.
- AAF – Specific details applying to rates.
- AAG – Indicates that the segment contains instructions to be passed on to the identified party.
- AAI – The text contains general information.
- AAJ – Additional conditions specific to this order or project.
- AAK – Information on the price conditions that are expected or given.
- AAL – Expression of a number in characters as length of ten meters.
- AAM – Technical or commercial reasons why a piece of equipment may not be re-used after the current transport terminates.
- AAN – Restrictions in handling depending on the technical characteristics of the piece of equipment or on the nature of the goods.
- AAO – Error described by a free text.
- AAP – Free text of the response to a communication.
- AAQ – A description of the contents of a package.
- AAR – (4053) Free text of the non Incoterms terms of delivery. For Incoterms, use: 4053.
- AAS – The remarks printed or to be printed on a bill of lading.
- AAT – Free text information on an IATA Air Waybill to indicate means by which account is to be settled.
- AAU – Information pertaining to the invoice covering the consignment.
Showing 20 of 369 values defined for element 4451 in D14B.
4453 – Code specifying the function of free text.
Type: an, Max Length: 3
Valid Codes:
- 1 – The occurrence of this text does not affect message processing.
- 2 – Text description of a coded data item for which there is no currently available code.
- 3 – Text must be read before actioning message.
- 4 – Pass text on to later recipient.
- 5 – Indicates that the text is to be taken as a header.
- 6 – Indicates that the text starts a new numbered paragraph.
- 7 – Indicates that the text is a paragraph.
3453 – Code specifying the language name.
Type: an, Max Length: 3
4447 – Code specifying the format of free text.
Type: an, Max Length: 3
Valid Codes:
- 1 – The associated text is centred in the available space.
- 2 – The associated text item is aligned flush left in the available space.
- 3 – The associated text is aligned flush right in the available space.
- 4 – The associated text is justified in the available space.
- 5 – The text is to be preceded by one blank line.
- 6 – The text is to be preceded by two blank lines.
- 7 – The text is to be preceded by three blank lines.
- 8 – The text is a continuation of preceding text.
- 9 – The text is to begin on a new page.
- 10 – The text is the final section of the preceding text.
- 11 – The text is to begin a new line.

Group SG9 (Max 99) Required

GEI To identify processing information. (Max 1) Required

C012 – Identification of the processing indicator.
- 7365 – Code specifying a processing indicator.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Content of message is accepted.
  - 2 – Content of message is rejected, with comment.
  - 3 – Content of message is rejected, without comment.
  - 4 – Specified goods have been released from Customs control.
  - 5 – Specified goods are required for examination.
  - 6 – All document, or documents as specified, to be produced.
  - 7 – Specified goods are detained.
  - 8 – Specified goods may move under Customs transfer.
  - 9 – Goods declaration is accepted, awaiting goods arrival.
  - 10 – Declaration is requested.
  - 11 – Information for pre-entry of a goods declaration.
  - 12 – The sender is not allowed to send the message type which was sent.
  - 13 – The message type is not supported by the recipient.
  - 14 – Message conveys information on an error.
  - 15 – Response after correction; correction has been approved.
  - 16 – Response after correction; correction has not been approved.
  - 17 – Message has been received.
  - 18 – Request for clearance of the goods.
  - 19 – Goods are in bulk.
  - 20 – Commercial transaction will be paid by cash within a prescribed time frame.
  Showing 20 of 177 values defined for element 7365 in D14B.
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 398 values defined for element 3055 in D14B.
- 7364 – Free form description of a processing indicator.
  Type: an, Max Length: 35
9649 – Code qualifying the processing information.
Type: an, Max Length: 3 (Required)
Valid Codes:
- 1 – To convey information related to the reporting of assets held by an entity.
- 2 – Identifies information about accounting data.
- 3 – Identifies information about the scheduling type.
- 4 – Identifies information about the party type.
- 5 – Identifies information about the consignment type.
- 6 – Defines information required to process the contents of a statistical array.
7187 – Code specifying a type of process.
Type: an, Max Length: 17
Valid Codes:
- 1 – A process to prepare wood.
- 2 – Treatment with a caustic agent.
- 3 – A process of digesting.
- 4 – Washing with brownstock.
- 5 – Removing colour by treatment with an oxidizing agent (a bleach).
- 6 – The process of drying pulp.
- 7 – Freezing process.
- 8 – The information to be processed is in structured form.
- 9 – The information to be processed is identical and given in structured and unstructured form.
- 10 – The information to be processed is different and is given in structured and unstructured form.
- 11 – The information to be processed is in unstructured form.
- 12 – Slaughter process.
- 13 – Packing process.
- 14 – Treated by heat sterilisation.
- 15 – Treated by chemical sterilisation.
- 16 – Treated by fumigation.
- 17 – Treated by irradiation.
- 18 – Fueling process.
- 19 – Code specifying the process of accepting the terms and conditions under which business will be conducted.
- 20 – The provision of a pathology service.
Showing 20 of 102 values defined for element 7187 in D14B.

CDI To describe a physical or logical state. (Max 1)

C564 – To give information in coded or clear text form on the physical or logical state.
- 7007 – Code specifying a physical or logical state.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Separated into multiple units.
  - 2 – Absent or lacking.
  - 3 – The actual identification is different from the given identification.
  - 4 – In a damaged state.
  - 5 – In a state of good condition.
  - 6 – The product is wrong.
  - 7 – Held, awaiting further action.
  - 8 – The object is in a proposed state.
  - 9 – The object is in an accepted state.
  - 10 – The object is in a scheduled state.
  - 11 – The object is in a completed state.
  - 12 – The object is in a rejected state.
  - 13 – The object is in a postponed state.
  - 14 – The object is in a cancelled state.
  - 15 – The object is obsolete.
  - 16 – Retaining the original properties, not impaired by spoilage or preservation.
  - 17 – The object is defective or faulty.
  - 18 – A substance in the fundamental state of matter that retains its size and shape without need of a container.
  - 19 – Matter in a state where it occupies whatever volume is available.
  - 20 – Matter in a state where it maintains a fixed volume but adapts to the shape of its container.
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 398 values defined for element 3055 in D14B.
- 7006 – Free form description of a physical or logical state.
  Type: an, Max Length: 70
7001 – Code qualifying the type of physical or logical state.
Type: an, Max Length: 3 (Required)
Valid Codes:
- 1 – At the time of receipt.
- 2 – At the time of despatch.
- 3 – The arrival condition of an object.
- 4 – The state of an object in its life cycle.

DTM To specify date, and/or time, or period. (Max 10)

Elements and codes as defined at DTM above.

ALI To indicate that special conditions due to the origin, customs preference, fiscal or commercial factors are applicable. (Max 5)

3239 – To identify the country in which the goods have been produced or manufactured, according to criteria laid down for the application of the Customs tariff or quantitative restrictions, or any measure related to trade.
Type: an, Max Length: 3
9213 – Code specifying a type of duty regime.
Type: an, Max Length: 3
Valid Codes:
- 1 – Origin of the product is subject to EC/EFTA (European Commission European Free Trade Association).
- 2 – Origin of the product is subject to other preference agreement.
- 3 – Origin of the product is not subject to any preference.
- 8 – Origin of the product is excluded.
- 9 – Origin of the product is imposed.
4183 – Code specifying a special condition.
Type: an, Max Length: 3
Valid Codes:
- 1 – Item concerned is applicable to national preference calculation.
- 2 – Item concerned is applicable for settlement/payment discount calculation.
- 3 – Item concerned is not applicable for settlement/payment discount calculation.
- 4 – Urgent delivery of goods for which a reservation was made.
- 5 – Item concerned is not applicable for bonus calculation.
- 6 – Item concerned is applicable for bonus calculation.
- 7 – Item concerned is applicable for commission calculation.
- 8 – Item concerned is applicable for discount calculation.
- 9 – Item should be available freely within the European Economic Community.
- 10 – Item concerned is applicable for the overall settlement discount.
- 11 – The stated price is inclusive of excise.
- 12 – The stated price is inclusive of tax.
- 13 – The stated price is inclusive of duty.
- 14 – Item concerned is not applicable for commission calculation.
- 15 – Item concerned is not applicable for discount calculation.
- 16 – Item concerned is subject to embargo restriction.
- 17 – Item concerned is not subject to embargo restriction.
- 18 – Item concerned requires export declaration.
- 19 – Item concerned does not require export declaration.
- 20 – Item concerned is liable to import restrictions defined by relevant national authority.
Showing 20 of 208 values defined for element 4183 in D14B.
4183 – Code specifying a special condition.
Type: an, Max Length: 3
Valid Codes:
- 1 – Item concerned is applicable to national preference calculation.
- 2 – Item concerned is applicable for settlement/payment discount calculation.
- 3 – Item concerned is not applicable for settlement/payment discount calculation.
- 4 – Urgent delivery of goods for which a reservation was made.
- 5 – Item concerned is not applicable for bonus calculation.
- 6 – Item concerned is applicable for bonus calculation.
- 7 – Item concerned is applicable for commission calculation.
- 8 – Item concerned is applicable for discount calculation.
- 9 – Item should be available freely within the European Economic Community.
- 10 – Item concerned is applicable for the overall settlement discount.
- 11 – The stated price is inclusive of excise.
- 12 – The stated price is inclusive of tax.
- 13 – The stated price is inclusive of duty.
- 14 – Item concerned is not applicable for commission calculation.
- 15 – Item concerned is not applicable for discount calculation.
- 16 – Item concerned is subject to embargo restriction.
- 17 – Item concerned is not subject to embargo restriction.
- 18 – Item concerned requires export declaration.
- 19 – Item concerned does not require export declaration.
- 20 – Item concerned is liable to import restrictions defined by relevant national authority.
Showing 20 of 208 values defined for element 4183 in D14B.
4183 – Code specifying a special condition.
Type: an, Max Length: 3
Valid Codes:
- 1 – Item concerned is applicable to national preference calculation.
- 2 – Item concerned is applicable for settlement/payment discount calculation.
- 3 – Item concerned is not applicable for settlement/payment discount calculation.
- 4 – Urgent delivery of goods for which a reservation was made.
- 5 – Item concerned is not applicable for bonus calculation.
- 6 – Item concerned is applicable for bonus calculation.
- 7 – Item concerned is applicable for commission calculation.
- 8 – Item concerned is applicable for discount calculation.
- 9 – Item should be available freely within the European Economic Community.
- 10 – Item concerned is applicable for the overall settlement discount.
- 11 – The stated price is inclusive of excise.
- 12 – The stated price is inclusive of tax.
- 13 – The stated price is inclusive of duty.
- 14 – Item concerned is not applicable for commission calculation.
- 15 – Item concerned is not applicable for discount calculation.
- 16 – Item concerned is subject to embargo restriction.
- 17 – Item concerned is not subject to embargo restriction.
- 18 – Item concerned requires export declaration.
- 19 – Item concerned does not require export declaration.
- 20 – Item concerned is liable to import restrictions defined by relevant national authority.
Showing 20 of 208 values defined for element 4183 in D14B.
4183 – Code specifying a special condition.
Type: an, Max Length: 3
Valid Codes:
- 1 – Item concerned is applicable to national preference calculation.
- 2 – Item concerned is applicable for settlement/payment discount calculation.
- 3 – Item concerned is not applicable for settlement/payment discount calculation.
- 4 – Urgent delivery of goods for which a reservation was made.
- 5 – Item concerned is not applicable for bonus calculation.
- 6 – Item concerned is applicable for bonus calculation.
- 7 – Item concerned is applicable for commission calculation.
- 8 – Item concerned is applicable for discount calculation.
- 9 – Item should be available freely within the European Economic Community.
- 10 – Item concerned is applicable for the overall settlement discount.
- 11 – The stated price is inclusive of excise.
- 12 – The stated price is inclusive of tax.
- 13 – The stated price is inclusive of duty.
- 14 – Item concerned is not applicable for commission calculation.
- 15 – Item concerned is not applicable for discount calculation.
- 16 – Item concerned is subject to embargo restriction.
- 17 – Item concerned is not subject to embargo restriction.
- 18 – Item concerned requires export declaration.
- 19 – Item concerned does not require export declaration.
- 20 – Item concerned is liable to import restrictions defined by relevant national authority.
Showing 20 of 208 values defined for element 4183 in D14B.
4183 – Code specifying a special condition.
Type: an, Max Length: 3
Valid Codes:
- 1 – Item concerned is applicable to national preference calculation.
- 2 – Item concerned is applicable for settlement/payment discount calculation.
- 3 – Item concerned is not applicable for settlement/payment discount calculation.
- 4 – Urgent delivery of goods for which a reservation was made.
- 5 – Item concerned is not applicable for bonus calculation.
- 6 – Item concerned is applicable for bonus calculation.
- 7 – Item concerned is applicable for commission calculation.
- 8 – Item concerned is applicable for discount calculation.
- 9 – Item should be available freely within the European Economic Community.
- 10 – Item concerned is applicable for the overall settlement discount.
- 11 – The stated price is inclusive of excise.
- 12 – The stated price is inclusive of tax.
- 13 – The stated price is inclusive of duty.
- 14 – Item concerned is not applicable for commission calculation.
- 15 – Item concerned is not applicable for discount calculation.
- 16 – Item concerned is subject to embargo restriction.
- 17 – Item concerned is not subject to embargo restriction.
- 18 – Item concerned requires export declaration.
- 19 – Item concerned does not require export declaration.
- 20 – Item concerned is liable to import restrictions defined by relevant national authority.
Showing 20 of 208 values defined for element 4183 in D14B.

MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 5)

Elements and codes as defined at MEA above.

MOA To specify a monetary amount. (Max 5)

C516 – Amount of goods or services stated as a monetary amount in a specified currency.
- 5025 – Code qualifying the type of monetary amount.
  Type: an, Max Length: 3 (Required)
  Valid Codes:
  - 1 – First VAT value if, for the same rate of VAT, there are 1 to 3 different ways to set this value.
  - 2 – Second VAT value if, for the same rate of VAT, there are 2 or 3 different ways to set this value.
  - 3 – Third VAT value if, for the same rate of VAT, there are 3 different ways to set this value.
  - 4 – Royalties relating to the imported goods that the buyer must pay, either directly or indirectly, as a condition of sale, to the extent that they are not included in the price actually paid or payable.
  - 5 – The amount specified is the adjusted amount.
  - 6 – The owing amount in the currency used as reference in the transaction.
  - 7 – Charges which parties agreed upon.
  - 8 – Total amount of allowance or charge.
  - 9 – Amount to be paid.
  - 10 – Indicates that the amount is based on the charged currency.
  - 11 – Amount that has been paid.
  - 12 – Amount which was remitted (see remittance advice).
  - 13 – The amount is subject to a total monetary discount.
  - 14 – The amount in the currency in which the amount is paid or has to be paid.
  - 15 – The addition of the balance all accounts divided by the number of accounts.
  - 16 – The fee that a bank charges for releasing monies.
  - 17 – The complete quantity of anything needed for or made in one operation or lot.
  - 18 – Fee charged by a broker for acting on behalf of a third party.
  - 19 – Commission paid by the importer to his/her agent for the service of representing him/her in the purchase.
  - 20 – Value of data contained on the carrier media (e.g. magnetic tape).
  Showing 20 of 544 values defined for element 5025 in D14B.
- 5004 – To specify a monetary amount.
  Type: n, Max Length: 35
- 6345 – Code specifying a monetary unit.
  Type: an, Max Length: 3
- 6343 – Code qualifying the type of currency.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – The currency of the monetary unit involved in the transaction for customs valuation.
  - 2 – The currency of the monetary unit involved in the transaction for insurance purposes.
  - 3 – The currency of the local monetary unit.
  - 4 – The currency of the monetary unit used for calculation in an invoice.
  - 5 – The currency of the monetary unit of an account.
  - 6 – The currency of the monetary unit to be converted from.
  - 7 – The currency of the monetary unit to be converted into.
  - 8 – The currency of the monetary unit used in a price list.
  - 9 – The currency of the monetary unit used in an order.
  - 10 – [5077] The currency of the monetary unit used for pricing purposes.
  - 11 – The currency of the monetary unit used for payment.
  - 12 – The currency of the monetary unit used in a quotation.
  - 13 – The currency of the local monetary unit at recipient's location.
  - 14 – The currency of the monetary unit normally used by the supplier.
  - 15 – The currency of the local monetary unit at sender's location.
  - 16 – The currency as per tariff.
  - 17 – The currency in which the charges are calculated.
  - 18 – The currency in which tax amounts are due or have been paid.
- 4405 – Code specifying a status.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Remark that the requested service in the order remains outstanding.
  - 2 – The instruction has been completed.
  - 3 – The information has been passed on.
  - 4 – The amount has the status of finality.
  - 5 – The amount is subject to finality.
  - 6 – The amount quoted is a minimum tariff.
  - 7 – The amount quoted is a fixed tariff.
  - 8 – The amount quoted is a maximum tariff.
  - 9 – The amount is quoted for information only, it is not part of the charges to be deducted or added.
  - 10 – The amount is available today.
  - 11 – The amount is available on the next banking office day after the booking date.
  - 12 – The amount is available on the second banking office day after the booking date.
  - 13 – The amount available on the third banking office day after the booking date.
  - 14 – Funds not collected by beneficiary.
  - 15 – The amount or quantity is zero.
  - 16 – No status or condition has been advised.
  - 17 – A status or condition has been requested.
  - 18 – No charge is to be made.
  - 19 – The quantity has been the subject of a rounding operation.
  - 20 – Intended to last or function indefinitely.
  Showing 20 of 145 values defined for element 4405 in D14B.

Group SG10 (Max 10) Required

RFF To specify a reference. (Max 1) Required

Elements and codes as defined at RFF above.

DTM To specify date, and/or time, or period. (Max 1)

Elements and codes as defined at DTM above.

Group SG11 (Max 10)

NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required

Elements and codes as defined at NAD above.

LOC To identify a place or a location and/or related locations. (Max 10)

Elements and codes as defined at LOC above.

Group SG12 (Max 10)

RFF To specify a reference. (Max 1) Required

Elements and codes as defined at RFF above.

DTM To specify date, and/or time, or period. (Max 1)

Elements and codes as defined at DTM above.

Group SG13 (Max 10)

CTA To identify a person or a department to whom communication should be directed. (Max 1) Required

Elements and codes as defined at CTA above.

COM To identify a communication number of a department or a person to whom communication should be directed. (Max 5)

Elements and codes as defined at COM above.

Group SG14 (Max 10)

TOD To specify terms of delivery or transport. (Max 1) Required

C100 – Terms of delivery or transport code from a specified source.
- 4053 – Code specifying the delivery or transport terms.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Indicates that the supplier will arrange delivery of the goods.
  - 2 – Code indicating that the logistic service provider has arranged the delivery of goods.
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 398 values defined for element 3055 in D14B.
- 4052 – Free form description of delivery or transport terms.
  Type: an, Max Length: 70
- 4052 – Free form description of delivery or transport terms.
  Type: an, Max Length: 70
4055 – Code specifying the function of delivery or transport terms.
Type: an, Max Length: 3
Valid Codes:
- 1 – Specifies a condition related to the price which a seller must fulfil before the buyer will complete a purchase.
- 2 – Condition requested by the customer under which the supplier shall deliver: Extent of freight costs, means of transport.
- 3 – Condition related to price and despatch that the seller must complete before the customer will agree payment.
- 4 – Indicates that the customer will pick up the goods at the supplier. He will take care of the means of transport.
- 5 – Specifies the conditions under which the transport takes place under the responsibility of the carrier.
- 6 – Specifies the conditions under which the goods must be delivered to the consignee.
4215 – Code specifying the payment method for transport charges.
Type: an, Max Length: 3
Valid Codes:
- A – The charges are to be charged to an account.
- AA – An indication that the consignor is responsible for the payment of the cash on delivery service charge.
- AB – An indication that the consignee is responsible for the payment of the cash on delivery service charge.
- AC – An indication that the consignor is responsible for the payment of the insurance costs.
- AD – An indication that the consignee is responsible for the payment of the insurance costs.
- CA – The amount of freight or other charge on a shipment advanced by one transportation line to another or to the shipper, to be collected from consignee.
- CC – A shipment on which freight charges will be paid by consignee.
- CF – The freight is collect but has been paid by the shipper and will be credited to that party.
- DF – The payment method for transport charges have been defined by the buyer and seller.
- FO – Title and control of goods pass to the buyer at port of call. Responsibility for export taxes and cost of documents for overseas shipments have not been specified.
- IC – Transaction set has been provided for information only.
- MX – The consignment is partially collect and partially prepaid.
- NC – The consignment is shipped on a service basis and there is no freight charge.
- NS – The payment method for transport charges have not been specified.
- PA – Costs have been paid in advance.
- PB – Buyer's private carriage picks up the goods as a return load to the buyer's facility.
- PC – shipping charges have been paid in advance of shipment but are charged back to consignee usually as line item on invoice for the purchased goods.
- PE – Place of payment not known at the begin of conveyance.
- PO – Payment in advance of freight and/or other charges prior to delivery of shipment at destination, usually by shipper at point of origin.
- PP – Seller of goods makes payment to carrier for freight charges prior to shipment.
Showing 20 of 29 values defined for element 4215 in D14B.

LOC To identify a place or a location and/or related locations. (Max 5)

Elements and codes as defined at LOC above.

FTX To provide free form or coded text information. (Max 5)

Elements and codes as defined at FTX above.

Group SG15 (Max 9999)

CPS To identify the sequence in which physical packing is presented in the consignment, and optionally to identify the hierarchical relationship between packing layers. (Max 1) Required

7164 – To identify a level within a hierarchical structure.
Type: an, Max Length: 35 (Required)
7166 – To identify the next higher level in a hierarchical structure.
Type: an, Max Length: 35
7075 – Code specifying a level of packaging.
Type: an, Max Length: 3
Valid Codes:
- 1 – Level of packing, if it exists, that is immediately subordinate to the intermediate packaging level.
- 2 – Level of packaging, if it exists, that is immediately subordinate to the outer packaging level.
- 3 – For packed merchandise, outermost level of packaging for a shipment.
- 4 – There is no specifiable level of packaging: packaging is inner and outer level as well.
- 5 – The packaging level being described is the shipment level.

FTX To provide free form or coded text information. (Max 5)

Elements and codes as defined at FTX above.

Group SG16 (Max 9999)

PAC To describe the number and type of packages/physical units. (Max 1) Required

C531 – Packaging level and details, terms and conditions.
- 7075 – Code specifying a level of packaging.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Level of packing, if it exists, that is immediately subordinate to the intermediate packaging level.
  - 2 – Level of packaging, if it exists, that is immediately subordinate to the outer packaging level.
  - 3 – For packed merchandise, outermost level of packaging for a shipment.
  - 4 – There is no specifiable level of packaging: packaging is inner and outer level as well.
  - 5 – The packaging level being described is the shipment level.
- 7233 – Code specifying information related to packaging.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – The ingredients of the product are not marked on the packaging of the product.
  - 2 – The product price is not marked on the packaging of the product.
  - 3 – The product best before date is not marked on the packaging of the product.
  - 4 – Package is not marked as recyclable.
  - 5 – A code indicating that promotional details have been marked on the package.
  - 6 – The item is labeled according to the general EAN.UCC specifications for clothing and fashion accessories.
  - 7 – The package is marked with the last date on which the item may be sold.
  - 8 – The package is marked with the last date on which the item may be used.
  - 9 – The package is marked with the date of the packaging or manufacturing of the item.
  - 10 – Package is not marked with any kind of date indicating freshness, such as use-by, best before or packaging date.
  - 31 – Package is marked with the product best before date.
  - 32 – The package is marked recyclable.
  - 33 – The package is marked returnable.
  - 34 – The information is related to product marking.
  - 35 – The information is related to the type of package.
  - 36 – The information specifies the package.
  - 37 – The information is related to protection of the package.
  - 38 – The information describes how coverage with tarpaulins is to be provided.
  - 39 – The information describes the platform or skid location.
  - 40 – The information gives the location of the load bearing piece.
  Showing 20 of 64 values defined for element 7233 in D14B.
- 7073 – Code specifying the packaging terms and conditions.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – The cost of packaging is paid by the supplier.
  - 2 – The cost of packaging is paid by the recipient.
  - 3 – There is no charge for packaging because it is returnable.
  - 4 – The packaging terms and conditions are specified by the buyer.
  - 5 – Reusable packaging owned by the carrier.
  - 6 – Disposable packaging supplied by the carrier.
  - 7 – Reusable packaging owned by the seller.
  - 8 – Disposable packaging supplied by the seller.
  - 9 – Reusable packaging specifically designed for packaging of the referenced item and owned by the buyer.
  - 10 – Disposable packaging specifically designed for packaging of the referenced item.
  - 11 – Reusable multi-purpose packaging owned by the buyer.
  - 12 – Reusable multi-purpose packaging owned by the seller.
  - 13 – The referenced item is to be supplied without packaging.
  - 14 – Non-standard reusable packaging owned by the seller.
  - 15 – The packaging used must meet durability and handling characteristics required for item export.
  - 16 – The packaging used must meet durability and handling characteristics required for domestic usage.
  - 17 – The cost of packaging is included in the item price.
  - 18 – The cost of packaging is shared equally between the buyer and seller.
  - 19 – The packaging cost will be invoiced on a separate message or document.
  - 20 – The packaging is free of charge.
  Showing 20 of 30 values defined for element 7073 in D14B.
C202 – Type of package by name or by code from a specified source.
- 7065 – Code specifying the type of package.
  Type: an, Max Length: 17
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 398 values defined for element 3055 in D14B.
- 7064 – Description of the form in which goods are presented.
  Type: an, Max Length: 35
C402 – Identification of the form in which goods are described.
- 7077 – Code specifying the format of a description.
  Type: an, Max Length: 3 (Required)
  Valid Codes:
  - A – Long description of an item in free form.
  - B – Description of an item in coded and free form text.
  - C – Description of an item in coded format.
  - D – Price look-up description of a product for point of sale receipts.
  - E – Short description of an item in free form.
  - F – Description of an item in free form text.
  - S – Description of an item in a structured format.
  - X – Description of an item in a coded and free text format.
- 7064 – Description of the form in which goods are presented.
  Type: an, Max Length: 35 (Required)
- 7143 – Coded identification of an item type.
  Type: an, Max Length: 3
  Valid Codes:
  - AA – Number assigned by manufacturer or seller to identify the release of a product.
  - AB – The item number is that of an assembly.
  - AC – Article identifier used within health sector to indicate data used conforms to HIBC.
  - AD – Number assigned to a cold roll.
  - AE – Number assigned to a hot roll.
  - AF – Number assigned to a slab, which is produced in a particular production step.
  - AG – A number assigned to indicate a revision of software.
  - AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
  - AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
  - AJ – Number assigned to a sample.
  - AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
  - AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
  - AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
  - AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
  - AO – A code which specifies the codification of the state's labelling requirements.
  - AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
  - AQ – A number identifying a coupon.
  - AR – A number to identify a resource.
  - AS – A number to identify a work task.
  - AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.
  Showing 20 of 168 values defined for element 7143 in D14B.
- 7064 – Description of the form in which goods are presented.
  Type: an, Max Length: 35
- 7143 – Coded identification of an item type.
  Type: an, Max Length: 3
  Valid Codes:
  - AA – Number assigned by manufacturer or seller to identify the release of a product.
  - AB – The item number is that of an assembly.
  - AC – Article identifier used within health sector to indicate data used conforms to HIBC.
  - AD – Number assigned to a cold roll.
  - AE – Number assigned to a hot roll.
  - AF – Number assigned to a slab, which is produced in a particular production step.
  - AG – A number assigned to indicate a revision of software.
  - AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
  - AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
  - AJ – Number assigned to a sample.
  - AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
  - AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
  - AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
  - AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
  - AO – A code which specifies the codification of the state's labelling requirements.
  - AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
  - AQ – A number identifying a coupon.
  - AR – A number to identify a resource.
  - AS – A number to identify a work task.
  - AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.
  Showing 20 of 168 values defined for element 7143 in D14B.
C532 – Indication of responsibility for payment and load contents of returnable packages.
- 8395 – Code specifying the responsibility for the freight payment for a returnable package.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – The freight charges involved with returning of the packaging are to be paid by the customer.
  - 2 – There is no charge for the freight of returning the packaging.
  - 3 – The responsibility for the freight for returning the packaging is to be paid by the supplier.
  - ZZZ – A code assigned within a code list to be used on an interim basis and as defined among trading partners until a precise code can be assigned to the code list.
- 8393 – Code specifying the load contents for a returnable package.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Loaded with empty 4-block for blocking purposes.
  - 2 – The container is, has been, or will be returned with dunnage only.
  - 3 – The container is, has been, or will be returned empty.
  - 4 – The package is, has been, or will be returned loaded with production material.
  - 6 – The package is, has been, or will be returned loaded with obsolete material.
  - 7 – The package is, has been, or will be returned loaded with excess production material.
  - 8 – The package is, has been, or will be returned loaded with rejected material.
  - 10 – The package is, has been, or will be returned loaded with processed material.
  - 11 – An empty container, which is folded.
7224 – To specify the number of packages.
Type: n, Max Length: 8

MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 10)

Elements and codes as defined at MEA above.

QTY To specify a pertinent quantity. (Max 10)

C186 – Quantity information in a transaction, qualified when relevant.
- 6063 – Code qualifying the type of quantity.
  Type: an, Max Length: 3 (Required)
  Valid Codes:
  - 1 – Individually separated and distinct quantity.
  - 2 – (6256) Quantity relevant for charge.
  - 3 – Quantity accumulated.
  - 4 – Interest for overdrawing the account.
  - 5 – The dosage of active ingredient per unit.
  - 6 – The number of entities that audit accounts.
  - 7 – The number of branch locations being leased by an entity.
  - 8 – Quantity of goods which the customer requires the supplier to have in inventory and which may be inspected by the customer if desired.
  - 9 – The number of branch locations owned by an entity.
  - 10 – The number of judgements registered against an entity.
  - 11 – Part of the whole quantity.
  - 12 – Quantity despatched by the seller.
  - 13 – The number of liens registered against an entity.
  - 14 – The number of animals kept for use or profit.
  - 15 – The number of cheques returned due to insufficient funds.
  - 16 – The number of stolen cheques.
  - 17 – The total quantity of a product on hand at a location. This includes as well units awaiting return to manufacturer, units unavailable due to inspection procedures and undamaged stock available for despatch, resale or use.
  - 18 – Quantity previously referenced.
  - 19 – The number of security shares issued and for which full payment has been made.
  - 20 – Quantity not usable.
  Showing 20 of 504 values defined for element 6063 in D14B.
- 6060 – Alphanumeric representation of a quantity.
  Type: an, Max Length: 35 (Required)
- 6411 – Code specifying the unit of measurement.
  Type: an, Max Length: 8

Group SG17 (Max 10)

HAN To specify handling and where necessary, notify hazards. (Max 1) Required

Elements and codes as defined at HAN above.

FTX To provide free form or coded text information. (Max 10)

Elements and codes as defined at FTX above.

Group SG18 (Max 9999)

PCI To specify markings and labels on individual packages or physical units. (Max 1) Required

C210 – Shipping marks on packages in free text; one to ten lines.
- 7102 – Free form description of the shipping marks.
  Type: an, Max Length: 35 (Required)
- 7102 – Free form description of the shipping marks.
  Type: an, Max Length: 35
- 7102 – Free form description of the shipping marks.
  Type: an, Max Length: 35
- 7102 – Free form description of the shipping marks.
  Type: an, Max Length: 35
- 7102 – Free form description of the shipping marks.
  Type: an, Max Length: 35
- 7102 – Free form description of the shipping marks.
  Type: an, Max Length: 35
- 7102 – Free form description of the shipping marks.
  Type: an, Max Length: 35
- 7102 – Free form description of the shipping marks.
  Type: an, Max Length: 35
- 7102 – Free form description of the shipping marks.
  Type: an, Max Length: 35
- 7102 – Free form description of the shipping marks.
  Type: an, Max Length: 35
C827 – Specification of the type of marking that reflects the method that was used and the conventions adhered to for marking (e.g. of packages).
- 7511 – Code specifying the type of marking.
  Type: an, Max Length: 3 (Required)
  Valid Codes:
  - 1 – Indication that the package is not marked with an EAN.UCC (International Article Numbering.Uniform Code Council) system code.
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 398 values defined for element 3055 in D14B.
4233 – Code specifying instructions for marking.
Type: an, Max Length: 3
Valid Codes:
- 1 – Packaging should not be marked with supplier's company name.
- 2 – Packaging should be marked with customer's company name.
- 3 – Packaging should be marked with customer's references.
- 4 – Packaging should also be marked with customer's article description.
- 5 – Packaging should be marked with customer's article description only.
- 6 – Packaging should be marked with package's dimensions.
- 7 – Packaging should be marked with net weight.
- 8 – Packaging should be marked with gross weight.
- 9 – Packaging should be marked with tare weight.
- 10 – Packaging should be marked with batch number.
- 11 – Packaging should be marked with customer's article number.
- 12 – Packaging should be marked with the running number of packages.
- 13 – Packaging should be marked with the date of production.
- 14 – Packaging should be marked with the expiry date.
- 15 – Packaging should be marked with the supplier number.
- 16 – Markings as specified by the buyer.
- 17 – Markings as specified by the seller.
- 18 – Markings as specified by carrier.
- 19 – Markings as specified by law.
- 20 – Markings as specified by industry.
Showing 20 of 38 values defined for element 4233 in D14B.
8169 – Code indicating whether an object is full or empty.
Type: an, Max Length: 3
Valid Codes:
- 1 – Indicates that there is more than a quarter of the volume available.
- 2 – Indicates that there is more than a half of the volume available.
- 3 – Indicates that there is more than three quarters of the volume available.
- 4 – Indicates that the object is empty.
- 5 – Indicates that the object is full.
- 6 – Indicates that there is no space available in the object.
- 7 – Indicates that the equipment is fully loaded, and includes a number LCL (Less Than Container Load) consignments.
- 8 – Indicates that the container is fully loaded with a single FCL (Full Container Load) consignment.
- 9 – Container represents part of a consignment declared on a single Customs declaration (i.e. the Customs declaration covers more than one container).
- 10 – Container represents part of the consignment declared on a single Customs declaration with the remainder being in other containers. Other goods, related to other declarations, are also in the container.
- 11 – Merchandise within a container/package covered by a single invoice.
- 12 – Merchandise within a container/package covered by more than one invoice.
- 13 – A container representing a consignment of goods for one consignee with multiple bill of lading numbers.

RFF To specify a reference. (Max 1)

Elements and codes as defined at RFF above.

CDI To describe a physical or logical state. (Max 1)

Elements and codes as defined at CDI above.

DTM To specify date, and/or time, or period. (Max 5)

Elements and codes as defined at DTM above.

Group SG19 (Max 99)

GIN To give specific identification numbers, either as single numbers or ranges. (Max 1) Required

C208 – Goods item identification numbers, start and end of consecutively numbered range.
- 7402 – Code specifying the unique identity of an object.
  Type: an, Max Length: 35 (Required)
- 7402 – Code specifying the unique identity of an object.
  Type: an, Max Length: 35
C208 – Goods item identification numbers, start and end of consecutively numbered range.
- 7402 – Code specifying the unique identity of an object.
  Type: an, Max Length: 35 (Required)
- 7402 – Code specifying the unique identity of an object.
  Type: an, Max Length: 35
C208 – Goods item identification numbers, start and end of consecutively numbered range.
- 7402 – Code specifying the unique identity of an object.
  Type: an, Max Length: 35 (Required)
- 7402 – Code specifying the unique identity of an object.
  Type: an, Max Length: 35
C208 – Goods item identification numbers, start and end of consecutively numbered range.
- 7402 – Code specifying the unique identity of an object.
  Type: an, Max Length: 35 (Required)
- 7402 – Code specifying the unique identity of an object.
  Type: an, Max Length: 35
C208 – Goods item identification numbers, start and end of consecutively numbered range.
- 7402 – Code specifying the unique identity of an object.
  Type: an, Max Length: 35 (Required)
- 7402 – Code specifying the unique identity of an object.
  Type: an, Max Length: 35
7405 – Code qualifying the identification of an object.
Type: an, Max Length: 3 (Required)
Valid Codes:
- AA – A number that is used to identify goods from a freight forwarder/consolidator.
- AB – The first element in a series of elements that together define the structure of an object.
- AC – The second element in a series of elements that together define the structure of an object.
- AD – The third element in a series of elements that together define the structure of an object.
- AE – The fourth element in a series of elements that together define the structure of an object.
- AF – The fifth element in a series of elements that together define the structure of an object.
- AG – The sixth element in a series of elements that together define the structure of an object.
- AH – The seventh element in a series of elements that together define the structure of an object.
- AI – The eighth element in a series of elements that together define the structure of an object.
- AJ – The ninth element in a series of elements that together define the structure of an object.
- AK – The identity of a data set.
- AL – [1420] Reference number to identify a kanban card.
- AM – Level number in a hierarchy or other structure.
- AN – A unique number identifying a particular assembly or other manufacturing process.
- AO – A number to identify the position within a package according to agreed rules between partners.
- AP – A name or number which identifies a product.
- AQ – Number assigned to a release.
- AR – Statistical concept.
- AS – A table of items e.g. figures and text represented in rows and columns.
- AT – Number identifying a group of articles in a predescribed unit load for shipment/dispatch as agreed between partners.
Showing 20 of 95 values defined for element 7405 in D14B.

CDI To describe a physical or logical state. (Max 1)

Elements and codes as defined at CDI above.

DLM To specify limitations on deliveries. (Max 999)

C522 – To specify an instruction.
- 4403 – Code qualifying the type of instruction.
  Type: an, Max Length: 3 (Required)
  Valid Codes:
  - 1 – Instruction requires action.
  - 2 – The instructions are to be executed by means of a party.
  - 3 – Instruction how to act if maximum value will be or has been exceeded.
  - 4 – Documentary credit confirmation instructions.
  - 5 – Documentary credit confirmation of issuance.
  - 6 – Documentary credit pre-advice instructions.
  - 7 – Delivery instructions for documents required under a documentary credit.
  - 8 – Additional terms and/or conditions to the documentary credit.
  - 9 – Instruction refers to an investment.
  - 10 – Instructions as to how the reimbursement is to be effected.
  - 11 – Instructions to the paying and/or accepting and/or negotiating bank.
  - 12 – Instructions and/or information to the applicant.
  - 13 – Case of need party power instructions.
  - 14 – Payment of the documentary credit in local currency instructions.
  - 15 – Return of acceptance draft instructions.
  - 16 – Advice of non-payment method.
  - 17 – Advice of non-acceptance method of the documentary credit.
  - 18 – Advice of payment method of the documentary credit.
  - 19 – Advice of acceptance method of the documentary credit.
  - 20 – Instructions for the first transmission of documents.
  Showing 20 of 33 values defined for element 4403 in D14B.
- 4401 – Code specifying an instruction.
  Type: an, Max Length: 3
  Valid Codes:
  - AA – Send a credit note.
  - AB – Send invoice, taking into account specified discrepancies.
  - AC – Instruction to advise party by airmail.
  - AD – Instruction to advise a party.
  - AE – Read the meter when the supply period starts.
  - AF – Instruction to cease delivery.
  - AG – The identified item must be sent for replacement.
  - AH – The identified item is to be picked up.
  - AI – Advise of documentary credit by telecommunication.
  - AJ – Instruction to advise party by fax.
  - AK – Issue documentary credit by registered airmail.
  - AL – Deliver documents in one set by registered airmail.
  - AM – Deliver documents in two sets by registered airmail.
  - AN – The receiver is authorized to debit the account of the sender when due.
  - AO – The receiver is authorized to reimburse themselves on the reimbursing bank when due.
  - AP – Instruction to advise party by phone.
  - AQ – Upon receipt and verification of documents we shall credit your account with us when due.
  - AR – Protest is to be made in case of non-payment.
  - AS – Protest is to be made in case of non-acceptance.
  - AT – Instruction to advise party by telex.
  Showing 20 of 98 values defined for element 4401 in D14B.
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 398 values defined for element 3055 in D14B.
- 4400 – Free form description of an instruction.
  Type: an, Max Length: 35
C214 – Identification of a special service by a code from a specified source or by description.
- 7161 – Code specifying a special service.
  Type: an, Max Length: 3
  Valid Codes:
  - AA – The service of providing advertising.
  - AAA – The service of providing telecommunication activities and/or faclities.
  - AAC – The service of making technical modifications to a product.
  - AAD – The service of producing to order.
  - AAE – The service of providing money for outlays on behalf of a trading partner.
  - AAF – The service of providing services outside the premises of the provider.
  - AAH – The service of providing additional processing.
  - AAI – The service of certifying validity.
  - AAS – The service of accepting goods or services.
  - AAT – The service to provide a rush delivery.
  - AAV – The service of providing special construction.
  - AAY – The service of providing airport facilities.
  - AAZ – The service allowing a party to use another party's facilities.
  - ABA – The service provided to hold a compulsory inventory.
  - ABB – Remove or off-load fuel from vehicle, vessel or craft.
  - ABC – Service of delivering goods to an aircraft from local storage.
  - ABD – The service of providing labour beyond the established limit of working hours.
  - ABF – The service of providing specific tooling.
  - ABK – Miscellaneous services.
  - ABL – The service of providing additional packaging.
  Showing 20 of 161 values defined for element 7161 in D14B.
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 398 values defined for element 3055 in D14B.
- 7160 – Free form description of a special service.
  Type: an, Max Length: 35
- 7160 – Free form description of a special service.
  Type: an, Max Length: 35
4455 – Code specifying a type of back order arrangement.
Type: an, Max Length: 3
Valid Codes:
- B – Item on back order due to unpublished status.
- F – Ship directly from factory to purchaser.
- N – Back order is unacceptable.
- W – Ship directly from warehouse.
- Y – Acceptable to put on back order if out of stock.
- ZZZ – A code assigned within a code list to be used on an interim basis and as defined among trading partners until a precise code can be assigned to the code list.
4457 – Code specifying the conditions under which substitution may take place.
Type: an, Max Length: 3
Valid Codes:
- 1 – Notice to supplier to fill order exactly as specified.
- 2 – Indicates that substitute bindings are acceptable if the edition of a book originally ordered is unavailable.
- 3 – Indicates that a paper back edition of a book is acceptable if the edition ordered is unavailable.
- 4 – Indicates that the cloth bound edition of a book is acceptable if the edition ordered is unavailable.
- 5 – Indicates that a library binding of a book is acceptable if the edition ordered is unavailable.
- 6 – Indicates that an item of the same value and performance may be substituted for the item specified.
- 7 – Indicates that an item of equal or greater value and performance may be substituted for the item specified.
- ZZZ – A code reserved for special trading partner requirements when pre-defined codes do not exist.

Group SG20 (Max 1)

LIN To identify a line item and configuration. (Max 1) Required

C212 – Goods identification for a specified source.
- 7140 – To identify an item.
  Type: an, Max Length: 35
- 7143 – Coded identification of an item type.
  Type: an, Max Length: 3
  Valid Codes:
  - AA – Number assigned by manufacturer or seller to identify the release of a product.
  - AB – The item number is that of an assembly.
  - AC – Article identifier used within health sector to indicate data used conforms to HIBC.
  - AD – Number assigned to a cold roll.
  - AE – Number assigned to a hot roll.
  - AF – Number assigned to a slab, which is produced in a particular production step.
  - AG – A number assigned to indicate a revision of software.
  - AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
  - AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
  - AJ – Number assigned to a sample.
  - AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
  - AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
  - AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
  - AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
  - AO – A code which specifies the codification of the state's labelling requirements.
  - AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
  - AQ – A number identifying a coupon.
  - AR – A number to identify a resource.
  - AS – A number to identify a work task.
  - AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.
  Showing 20 of 168 values defined for element 7143 in D14B.
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 398 values defined for element 3055 in D14B.
C829 – To provide an indication that a segment or segment group is used to contain sub-line or sub-line item information and to optionally enable the sub-line to be identified.
- 1082 – To identify a line item.
  Type: an, Max Length: 6
1082 – To identify a line item.
Type: an, Max Length: 6
1229 – Code specifying the action to be taken or already taken.
Type: an, Max Length: 3
Valid Codes:
- 1 – The information is to be or has been added.
- 2 – The information is to be or has been deleted.
- 3 – The information is to be or has been changed.
- 4 – This line item is not affected by the actual message.
- 5 – This line item is entirely accepted by the seller.
- 6 – This line item is accepted but amended by the seller.
- 7 – This line item is not accepted by the seller.
- 8 – Code specifying that the message is a schedule only.
- 9 – Code specifying that amendments are requested/notified.
- 10 – This line item is not found in the referenced message.
- 11 – This line is not amended by the buyer.
- 12 – Code specifying that the line item numbers have changed.
- 13 – Buyer has deducted amount from payment.
- 14 – Buyer has a claim against an outstanding invoice.
- 15 – Factor has been requested to charge back the outstanding item.
- 16 – Seller agrees to issue a credit note.
- 17 – New settlement terms have been agreed.
- 18 – Factor agrees to abide by the outcome of negotiations between seller and buyer.
- 19 – Seller does not accept validity of dispute.
- 20 – The reported situation is settled.
Showing 20 of 118 values defined for element 1229 in D14B.
1222 – To specify a level within a configuration.
Type: n, Max Length: 2
7083 – Code specifying the configuration operation.
Type: an, Max Length: 3
Valid Codes:
- A – The operation is to add to the configuration.
- D – The operation is to delete from the configuration.
- I – The item is a part of the configuration.

PIA To specify additional or substitutional item identification codes. (Max 10)

C212 – Goods identification for a specified source.
- 7140 – To identify an item.
  Type: an, Max Length: 35
- 7143 – Coded identification of an item type.
  Type: an, Max Length: 3
  Valid Codes:
  - AA – Number assigned by manufacturer or seller to identify the release of a product.
  - AB – The item number is that of an assembly.
  - AC – Article identifier used within health sector to indicate data used conforms to HIBC.
  - AD – Number assigned to a cold roll.
  - AE – Number assigned to a hot roll.
  - AF – Number assigned to a slab, which is produced in a particular production step.
  - AG – A number assigned to indicate a revision of software.
  - AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
  - AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
  - AJ – Number assigned to a sample.
  - AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
  - AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
  - AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
  - AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
  - AO – A code which specifies the codification of the state's labelling requirements.
  - AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
  - AQ – A number identifying a coupon.
  - AR – A number to identify a resource.
  - AS – A number to identify a work task.
  - AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.
  Showing 20 of 168 values defined for element 7143 in D14B.
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 398 values defined for element 3055 in D14B.
C212 – Goods identification for a specified source.
- 7140 – To identify an item.
  Type: an, Max Length: 35
- 7143 – Coded identification of an item type.
  Type: an, Max Length: 3
  Valid Codes:
  - AA – Number assigned by manufacturer or seller to identify the release of a product.
  - AB – The item number is that of an assembly.
  - AC – Article identifier used within health sector to indicate data used conforms to HIBC.
  - AD – Number assigned to a cold roll.
  - AE – Number assigned to a hot roll.
  - AF – Number assigned to a slab, which is produced in a particular production step.
  - AG – A number assigned to indicate a revision of software.
  - AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
  - AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
  - AJ – Number assigned to a sample.
  - AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
  - AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
  - AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
  - AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
  - AO – A code which specifies the codification of the state's labelling requirements.
  - AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
  - AQ – A number identifying a coupon.
  - AR – A number to identify a resource.
  - AS – A number to identify a work task.
  - AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.
  Showing 20 of 168 values defined for element 7143 in D14B.
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 398 values defined for element 3055 in D14B.
C212 – Goods identification for a specified source.
- 7140 – To identify an item.
  Type: an, Max Length: 35
- 7143 – Coded identification of an item type.
  Type: an, Max Length: 3
  Valid Codes:
  - AA – Number assigned by manufacturer or seller to identify the release of a product.
  - AB – The item number is that of an assembly.
  - AC – Article identifier used within health sector to indicate data used conforms to HIBC.
  - AD – Number assigned to a cold roll.
  - AE – Number assigned to a hot roll.
  - AF – Number assigned to a slab, which is produced in a particular production step.
  - AG – A number assigned to indicate a revision of software.
  - AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
  - AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
  - AJ – Number assigned to a sample.
  - AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
  - AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
  - AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
  - AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
  - AO – A code which specifies the codification of the state's labelling requirements.
  - AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
  - AQ – A number identifying a coupon.
  - AR – A number to identify a resource.
  - AS – A number to identify a work task.
  - AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.
  Showing 20 of 168 values defined for element 7143 in D14B.
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 398 values defined for element 3055 in D14B.
C212 – Goods identification for a specified source.
- 7140 – To identify an item.
  Type: an, Max Length: 35
- 7143 – Coded identification of an item type.
  Type: an, Max Length: 3
  Valid Codes:
  - AA – Number assigned by manufacturer or seller to identify the release of a product.
  - AB – The item number is that of an assembly.
  - AC – Article identifier used within health sector to indicate data used conforms to HIBC.
  - AD – Number assigned to a cold roll.
  - AE – Number assigned to a hot roll.
  - AF – Number assigned to a slab, which is produced in a particular production step.
  - AG – A number assigned to indicate a revision of software.
  - AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
  - AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
  - AJ – Number assigned to a sample.
  - AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
  - AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
  - AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
  - AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
  - AO – A code which specifies the codification of the state's labelling requirements.
  - AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
  - AQ – A number identifying a coupon.
  - AR – A number to identify a resource.
  - AS – A number to identify a work task.
  - AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.
  Showing 20 of 168 values defined for element 7143 in D14B.
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 398 values defined for element 3055 in D14B.
C212 – Goods identification for a specified source.
- 7140 – To identify an item.
  Type: an, Max Length: 35
- 7143 – Coded identification of an item type.
  Type: an, Max Length: 3
  Valid Codes:
  - AA – Number assigned by manufacturer or seller to identify the release of a product.
  - AB – The item number is that of an assembly.
  - AC – Article identifier used within health sector to indicate data used conforms to HIBC.
  - AD – Number assigned to a cold roll.
  - AE – Number assigned to a hot roll.
  - AF – Number assigned to a slab, which is produced in a particular production step.
  - AG – A number assigned to indicate a revision of software.
  - AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
  - AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
  - AJ – Number assigned to a sample.
  - AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
  - AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
  - AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
  - AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
  - AO – A code which specifies the codification of the state's labelling requirements.
  - AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
  - AQ – A number identifying a coupon.
  - AR – A number to identify a resource.
  - AS – A number to identify a work task.
  - AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.
  Showing 20 of 168 values defined for element 7143 in D14B.
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 398 values defined for element 3055 in D14B.
4347 – Code qualifying the product identifier.
Type: an, Max Length: 3 (Required)
Valid Codes:
- 1 – Information which specifies and qualifies product identifications.
- 2 – The item number describes the potential substitute product.
- 3 – The given item number is the number of the product that substitutes another one.
- 4 – The given item number is the number of the original product substituted by another.
- 5 – The item number is for product identification.
- 6 – Product id of the product that will follow the one currently in production/trade.
- 7 – Product id of the predecessor of the product currently in production/trade.
- 8 – The given item number is the expired item number of the product. It has been replaced.
- 9 – Code indicating the deletion of a secondary identification.
- 10 – Identification of a defective part.
- 11 – Identification of a repaired part.
- 12 – Alternate number to identify the product.
- 13 – Used to indicate which trade item the promotional trade item replaces or coexists alongside. To enable the identification of the two trade items to be linked providing access to their information.

IMD To describe an item in either an industry or free format. (Max 99)

C272 – To provide the characteristic of the item being described.
- 7081 – Code specifying the characteristic of an item.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Product in conformity with specifications.
  - 2 – Description of general product form.
  - 3 – Product without quality control when received.
  - 4 – Description of the finish required/available on the product.
  - 5 – Description of what the end use application of the product will be.
  - 6 – Description of the method of construction.
  - 7 – A drug name specially given in order that it may be freely used without legal restriction.
  - 8 – The characteristic of a product.
  - 9 – Description of a sub-product.
  - 10 – Specifies the direction of the grain of the product.
  - 11 – Item characteristic is described following Customs specifications.
  - 12 – Description of the type and/or process involved in making the product. E.g. in steel, description of the steelmaking process.
  - 13 – The degree of excellence of a thing.
  - 14 – Description of the surface condition (e.g. roughness) of the product.
  - 15 – Description of any heat treatment or annealing required/performed on the product.
  - 16 – A code identifying a size system, comprising a set of sizes.
  - 17 – Description of any special coating required/available on the product.
  - 18 – Description of any chemical surface treatment required/performed on the product.
  - 19 – Description of any mechanical surface treatment required/performed on the product.
  - 20 – Type of transfer capacity.
  Showing 20 of 249 values defined for element 7081 in D14B.
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 398 values defined for element 3055 in D14B.
C273 – Description of an item.
- 7009 – Code specifying an item.
  Type: an, Max Length: 17
  Valid Codes:
  - 1 – Displayed text is bold.
  - 2 – Displayed text is dimmed.
  - 3 – Displayed text is italicised.
  - 4 – Displayed text is normal.
  - 5 – Displayed text foreground and background colours are reversed.
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 398 values defined for element 3055 in D14B.
- 7008 – Free form description of an item.
  Type: an, Max Length: 256
- 7008 – Free form description of an item.
  Type: an, Max Length: 256
- 3453 – Code specifying the language name.
  Type: an, Max Length: 3
7077 – Code specifying the format of a description.
Type: an, Max Length: 3
Valid Codes:
- A – Long description of an item in free form.
- B – Description of an item in coded and free form text.
- C – Description of an item in coded format.
- D – Price look-up description of a product for point of sale receipts.
- E – Short description of an item in free form.
- F – Description of an item in free form text.
- S – Description of an item in a structured format.
- X – Description of an item in a coded and free text format.
7383 – Code specifying the surface or layer of an object.
Type: an, Max Length: 3
Valid Codes:
- 1S – The location is side one.
- 2S – The location is side two.
- AA – To indicate that the entity being specified is on the surface.
- AB – To indicate that the entity being specified is off the surface.
- AC – Specifies that the surface/layer/position being described is the soluble portion.
- AD – The surface or layer of the product being described is the opposite corners.
- AE – The surface or layer of the product being described are the corner diagonals.
- AF – The left-hand side (looking forward) of a ship, boat or aircraft.
- AG – The right-hand side (looking forward) of a ship, boat or aircraft.
- AH – Surface of a tooth directed toward the face and opposite the lingual surface.
- AI – Surface of the tooth relating to the cutting edge of the anterior teeth, incisors or canines.
- AJ – Surface of the tooth toward the back of the dental arch, or away from the midline.
- AK – Surface of the tooth pertaining to or around the cheek.
- AL – Surface of the tooth pertaining to the masticating surfaces of the posterior teeth.
- AM – Surface of the tooth pertaining to or around the tongue.
- AN – Surface of the tooth toward the midline of the dental arch.
- BC – The location is at the back of the cab.
- BS – The location is both sides.
- BT – The location is on the bottom.
- DF – The location is in the dual fuel tank positions.
Showing 20 of 33 values defined for element 7383 in D14B.

MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 10)

Elements and codes as defined at MEA above.

CDI To describe a physical or logical state. (Max 1)

Elements and codes as defined at CDI above.

QTY To specify a pertinent quantity. (Max 10)

Elements and codes as defined at QTY above.

ALI To indicate that special conditions due to the origin, customs preference, fiscal or commercial factors are applicable. (Max 10)

Elements and codes as defined at ALI above.

GIN To give specific identification numbers, either as single numbers or ranges. (Max 999)

Elements and codes as defined at GIN above.

GIR To specify a related set of identification numbers. (Max 999)

C206 – The identification of an object.
- 7402 – Code specifying the unique identity of an object.
  Type: an, Max Length: 35 (Required)
- 7405 – Code qualifying the identification of an object.
  Type: an, Max Length: 3
  Valid Codes:
  - AA – A number that is used to identify goods from a freight forwarder/consolidator.
  - AB – The first element in a series of elements that together define the structure of an object.
  - AC – The second element in a series of elements that together define the structure of an object.
  - AD – The third element in a series of elements that together define the structure of an object.
  - AE – The fourth element in a series of elements that together define the structure of an object.
  - AF – The fifth element in a series of elements that together define the structure of an object.
  - AG – The sixth element in a series of elements that together define the structure of an object.
  - AH – The seventh element in a series of elements that together define the structure of an object.
  - AI – The eighth element in a series of elements that together define the structure of an object.
  - AJ – The ninth element in a series of elements that together define the structure of an object.
  - AK – The identity of a data set.
  - AL – [1420] Reference number to identify a kanban card.
  - AM – Level number in a hierarchy or other structure.
  - AN – A unique number identifying a particular assembly or other manufacturing process.
  - AO – A number to identify the position within a package according to agreed rules between partners.
  - AP – A name or number which identifies a product.
  - AQ – Number assigned to a release.
  - AR – Statistical concept.
  - AS – A table of items e.g. figures and text represented in rows and columns.
  - AT – Number identifying a group of articles in a predescribed unit load for shipment/dispatch as agreed between partners.
  Showing 20 of 95 values defined for element 7405 in D14B.
- 4405 – Code specifying a status.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Remark that the requested service in the order remains outstanding.
  - 2 – The instruction has been completed.
  - 3 – The information has been passed on.
  - 4 – The amount has the status of finality.
  - 5 – The amount is subject to finality.
  - 6 – The amount quoted is a minimum tariff.
  - 7 – The amount quoted is a fixed tariff.
  - 8 – The amount quoted is a maximum tariff.
  - 9 – The amount is quoted for information only, it is not part of the charges to be deducted or added.
  - 10 – The amount is available today.
  - 11 – The amount is available on the next banking office day after the booking date.
  - 12 – The amount is available on the second banking office day after the booking date.
  - 13 – The amount available on the third banking office day after the booking date.
  - 14 – Funds not collected by beneficiary.
  - 15 – The amount or quantity is zero.
  - 16 – No status or condition has been advised.
  - 17 – A status or condition has been requested.
  - 18 – No charge is to be made.
  - 19 – The quantity has been the subject of a rounding operation.
  - 20 – Intended to last or function indefinitely.
  Showing 20 of 145 values defined for element 4405 in D14B.
C206 – The identification of an object.
- 7402 – Code specifying the unique identity of an object.
  Type: an, Max Length: 35 (Required)
- 7405 – Code qualifying the identification of an object.
  Type: an, Max Length: 3
  Valid Codes:
  - AA – A number that is used to identify goods from a freight forwarder/consolidator.
  - AB – The first element in a series of elements that together define the structure of an object.
  - AC – The second element in a series of elements that together define the structure of an object.
  - AD – The third element in a series of elements that together define the structure of an object.
  - AE – The fourth element in a series of elements that together define the structure of an object.
  - AF – The fifth element in a series of elements that together define the structure of an object.
  - AG – The sixth element in a series of elements that together define the structure of an object.
  - AH – The seventh element in a series of elements that together define the structure of an object.
  - AI – The eighth element in a series of elements that together define the structure of an object.
  - AJ – The ninth element in a series of elements that together define the structure of an object.
  - AK – The identity of a data set.
  - AL – [1420] Reference number to identify a kanban card.
  - AM – Level number in a hierarchy or other structure.
  - AN – A unique number identifying a particular assembly or other manufacturing process.
  - AO – A number to identify the position within a package according to agreed rules between partners.
  - AP – A name or number which identifies a product.
  - AQ – Number assigned to a release.
  - AR – Statistical concept.
  - AS – A table of items e.g. figures and text represented in rows and columns.
  - AT – Number identifying a group of articles in a predescribed unit load for shipment/dispatch as agreed between partners.
  Showing 20 of 95 values defined for element 7405 in D14B.
- 4405 – Code specifying a status.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Remark that the requested service in the order remains outstanding.
  - 2 – The instruction has been completed.
  - 3 – The information has been passed on.
  - 4 – The amount has the status of finality.
  - 5 – The amount is subject to finality.
  - 6 – The amount quoted is a minimum tariff.
  - 7 – The amount quoted is a fixed tariff.
  - 8 – The amount quoted is a maximum tariff.
  - 9 – The amount is quoted for information only, it is not part of the charges to be deducted or added.
  - 10 – The amount is available today.
  - 11 – The amount is available on the next banking office day after the booking date.
  - 12 – The amount is available on the second banking office day after the booking date.
  - 13 – The amount available on the third banking office day after the booking date.
  - 14 – Funds not collected by beneficiary.
  - 15 – The amount or quantity is zero.
  - 16 – No status or condition has been advised.
  - 17 – A status or condition has been requested.
  - 18 – No charge is to be made.
  - 19 – The quantity has been the subject of a rounding operation.
  - 20 – Intended to last or function indefinitely.
  Showing 20 of 145 values defined for element 4405 in D14B.
C206 – The identification of an object.
- 7402 – Code specifying the unique identity of an object.
  Type: an, Max Length: 35 (Required)
- 7405 – Code qualifying the identification of an object.
  Type: an, Max Length: 3
  Valid Codes:
  - AA – A number that is used to identify goods from a freight forwarder/consolidator.
  - AB – The first element in a series of elements that together define the structure of an object.
  - AC – The second element in a series of elements that together define the structure of an object.
  - AD – The third element in a series of elements that together define the structure of an object.
  - AE – The fourth element in a series of elements that together define the structure of an object.
  - AF – The fifth element in a series of elements that together define the structure of an object.
  - AG – The sixth element in a series of elements that together define the structure of an object.
  - AH – The seventh element in a series of elements that together define the structure of an object.
  - AI – The eighth element in a series of elements that together define the structure of an object.
  - AJ – The ninth element in a series of elements that together define the structure of an object.
  - AK – The identity of a data set.
  - AL – [1420] Reference number to identify a kanban card.
  - AM – Level number in a hierarchy or other structure.
  - AN – A unique number identifying a particular assembly or other manufacturing process.
  - AO – A number to identify the position within a package according to agreed rules between partners.
  - AP – A name or number which identifies a product.
  - AQ – Number assigned to a release.
  - AR – Statistical concept.
  - AS – A table of items e.g. figures and text represented in rows and columns.
  - AT – Number identifying a group of articles in a predescribed unit load for shipment/dispatch as agreed between partners.
  Showing 20 of 95 values defined for element 7405 in D14B.
- 4405 – Code specifying a status.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Remark that the requested service in the order remains outstanding.
  - 2 – The instruction has been completed.
  - 3 – The information has been passed on.
  - 4 – The amount has the status of finality.
  - 5 – The amount is subject to finality.
  - 6 – The amount quoted is a minimum tariff.
  - 7 – The amount quoted is a fixed tariff.
  - 8 – The amount quoted is a maximum tariff.
  - 9 – The amount is quoted for information only, it is not part of the charges to be deducted or added.
  - 10 – The amount is available today.
  - 11 – The amount is available on the next banking office day after the booking date.
  - 12 – The amount is available on the second banking office day after the booking date.
  - 13 – The amount available on the third banking office day after the booking date.
  - 14 – Funds not collected by beneficiary.
  - 15 – The amount or quantity is zero.
  - 16 – No status or condition has been advised.
  - 17 – A status or condition has been requested.
  - 18 – No charge is to be made.
  - 19 – The quantity has been the subject of a rounding operation.
  - 20 – Intended to last or function indefinitely.
  Showing 20 of 145 values defined for element 4405 in D14B.
C206 – The identification of an object.
- 7402 – Code specifying the unique identity of an object.
  Type: an, Max Length: 35 (Required)
- 7405 – Code qualifying the identification of an object.
  Type: an, Max Length: 3
  Valid Codes:
  - AA – A number that is used to identify goods from a freight forwarder/consolidator.
  - AB – The first element in a series of elements that together define the structure of an object.
  - AC – The second element in a series of elements that together define the structure of an object.
  - AD – The third element in a series of elements that together define the structure of an object.
  - AE – The fourth element in a series of elements that together define the structure of an object.
  - AF – The fifth element in a series of elements that together define the structure of an object.
  - AG – The sixth element in a series of elements that together define the structure of an object.
  - AH – The seventh element in a series of elements that together define the structure of an object.
  - AI – The eighth element in a series of elements that together define the structure of an object.
  - AJ – The ninth element in a series of elements that together define the structure of an object.
  - AK – The identity of a data set.
  - AL – [1420] Reference number to identify a kanban card.
  - AM – Level number in a hierarchy or other structure.
  - AN – A unique number identifying a particular assembly or other manufacturing process.
  - AO – A number to identify the position within a package according to agreed rules between partners.
  - AP – A name or number which identifies a product.
  - AQ – Number assigned to a release.
  - AR – Statistical concept.
  - AS – A table of items e.g. figures and text represented in rows and columns.
  - AT – Number identifying a group of articles in a predescribed unit load for shipment/dispatch as agreed between partners.
  Showing 20 of 95 values defined for element 7405 in D14B.
- 4405 – Code specifying a status.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Remark that the requested service in the order remains outstanding.
  - 2 – The instruction has been completed.
  - 3 – The information has been passed on.
  - 4 – The amount has the status of finality.
  - 5 – The amount is subject to finality.
  - 6 – The amount quoted is a minimum tariff.
  - 7 – The amount quoted is a fixed tariff.
  - 8 – The amount quoted is a maximum tariff.
  - 9 – The amount is quoted for information only, it is not part of the charges to be deducted or added.
  - 10 – The amount is available today.
  - 11 – The amount is available on the next banking office day after the booking date.
  - 12 – The amount is available on the second banking office day after the booking date.
  - 13 – The amount available on the third banking office day after the booking date.
  - 14 – Funds not collected by beneficiary.
  - 15 – The amount or quantity is zero.
  - 16 – No status or condition has been advised.
  - 17 – A status or condition has been requested.
  - 18 – No charge is to be made.
  - 19 – The quantity has been the subject of a rounding operation.
  - 20 – Intended to last or function indefinitely.
  Showing 20 of 145 values defined for element 4405 in D14B.
C206 – The identification of an object.
- 7402 – Code specifying the unique identity of an object.
  Type: an, Max Length: 35 (Required)
- 7405 – Code qualifying the identification of an object.
  Type: an, Max Length: 3
  Valid Codes:
  - AA – A number that is used to identify goods from a freight forwarder/consolidator.
  - AB – The first element in a series of elements that together define the structure of an object.
  - AC – The second element in a series of elements that together define the structure of an object.
  - AD – The third element in a series of elements that together define the structure of an object.
  - AE – The fourth element in a series of elements that together define the structure of an object.
  - AF – The fifth element in a series of elements that together define the structure of an object.
  - AG – The sixth element in a series of elements that together define the structure of an object.
  - AH – The seventh element in a series of elements that together define the structure of an object.
  - AI – The eighth element in a series of elements that together define the structure of an object.
  - AJ – The ninth element in a series of elements that together define the structure of an object.
  - AK – The identity of a data set.
  - AL – [1420] Reference number to identify a kanban card.
  - AM – Level number in a hierarchy or other structure.
  - AN – A unique number identifying a particular assembly or other manufacturing process.
  - AO – A number to identify the position within a package according to agreed rules between partners.
  - AP – A name or number which identifies a product.
  - AQ – Number assigned to a release.
  - AR – Statistical concept.
  - AS – A table of items e.g. figures and text represented in rows and columns.
  - AT – Number identifying a group of articles in a predescribed unit load for shipment/dispatch as agreed between partners.
  Showing 20 of 95 values defined for element 7405 in D14B.
- 4405 – Code specifying a status.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Remark that the requested service in the order remains outstanding.
  - 2 – The instruction has been completed.
  - 3 – The information has been passed on.
  - 4 – The amount has the status of finality.
  - 5 – The amount is subject to finality.
  - 6 – The amount quoted is a minimum tariff.
  - 7 – The amount quoted is a fixed tariff.
  - 8 – The amount quoted is a maximum tariff.
  - 9 – The amount is quoted for information only, it is not part of the charges to be deducted or added.
  - 10 – The amount is available today.
  - 11 – The amount is available on the next banking office day after the booking date.
  - 12 – The amount is available on the second banking office day after the booking date.
  - 13 – The amount available on the third banking office day after the booking date.
  - 14 – Funds not collected by beneficiary.
  - 15 – The amount or quantity is zero.
  - 16 – No status or condition has been advised.
  - 17 – A status or condition has been requested.
  - 18 – No charge is to be made.
  - 19 – The quantity has been the subject of a rounding operation.
  - 20 – Intended to last or function indefinitely.
  Showing 20 of 145 values defined for element 4405 in D14B.
7297 – Code qualifying the type of set.
Type: an, Max Length: 3 (Required)
Valid Codes:
- 1 – Identification of the product set.
- 2 – Identification of the licence set.
- 3 – Related numbers identifying a package such as a bar code label number related to a kanban card number, etc.
- 4 – A code which indicates that the identities which follow are related to a particular vehicle which may have been previously identified.
- 5 – The source database of the data in a data set.
- 6 – The target database for the data in a data set.
- 7 – A coded or non coded list of values.
- 8 – The contract related item numbers.
- 9 – Financial security identifier set.
- 10 – A code to identify a set of numbers used for accounting.
- 11 – A set of numbers to identify a project.
- 12 – A set of numbers to identify a plan of work.
- 13 – A set of numbers to identify a schedule of work.
- 14 – A set of numbers to identify a resource.
- 15 – A set of numbers to identify a milestone event.
- 16 – A set of numbers to identify an interface work task.
- 17 – A set of numbers to identify a work task constraint.
- 18 – Position number(s) of a data structure's relevant components.

DTM To specify date, and/or time, or period. (Max 5)

Elements and codes as defined at DTM above.

MOA To specify a monetary amount. (Max 1)

Elements and codes as defined at MOA above.

FTX To provide free form or coded text information. (Max 5)

Elements and codes as defined at FTX above.

Group SG21 (Max 10)

RFF To specify a reference. (Max 1) Required

Elements and codes as defined at RFF above.

DTM To specify date, and/or time, or period. (Max 1)

Elements and codes as defined at DTM above.

Group SG22 (Max 10)

DGS To identify dangerous goods. (Max 1) Required

C205 – The identification of the dangerous goods in code.
- 8351 – Code identifying a hazard.
  Type: an, Max Length: 7 (Required)
- 8078 – To identify an additional hazard classification.
  Type: an, Max Length: 7
- 8092 – To identify the version number of a hazard code.
  Type: an, Max Length: 10
C234 – Information on dangerous goods, taken from the United Nations Dangerous Goods classification.
- 7124 – The unique serial number assigned within the United Nations to substances and articles contained in a list of the dangerous goods most commonly carried.
  Type: n, Max Length: 4
- 7088 – To describe the flashpoint of dangerous goods.
  Type: an, Max Length: 8
C223 – Temperature at which a vapor can be ignited as per ISO 1523/73.
- 7106 – To specify the value of the flashpoint of a shipment.
  Type: n, Max Length: 3
- 6411 – Code specifying the unit of measurement.
  Type: an, Max Length: 8
C235 – These numbers appear on the hazard identification placard required on the means of transport.
- 8158 – To specify the identity number for the upper part of the orange hazard placard required on the means of transport.
  Type: an, Max Length: 4
- 8186 – To specify the identity number for the lower part of the orange hazard placard required on the means of transport.
  Type: an, Max Length: 4
C236 – Markings identifying the type of hazardous goods and similar information.
- 8246 – To identify the marking of dangerous goods.
  Type: an, Max Length: 4
- 8246 – To identify the marking of dangerous goods.
  Type: an, Max Length: 4
- 8246 – To identify the marking of dangerous goods.
  Type: an, Max Length: 4
- 8246 – To identify the marking of dangerous goods.
  Type: an, Max Length: 4
C289 – To specify a restriction for transport through tunnels.
- 8461 – A code indicating a restriction for transport through tunnels.
  Type: an, Max Length: 6
- 1131 – Code identifying a user or association maintained code list.
  Type: an, Max Length: 17
- 3055 – Code specifying the agency responsible for a code list.
  Type: an, Max Length: 3
  Valid Codes:
  - 1 – Customs Co-operation Council (now World Customs Organization).
  - 2 – Generic: see also 140, 141, 142, 162.
  - 3 – The airline industry's international organisation.
  - 4 – International Chamber of Commerce.
  - 5 – International Organization of Standardization.
  - 6 – United Nations Economic Commission for Europe.
  - 7 – EDI project for chemical industry.
  - 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
  - 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
  - 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
  - 11 – A register of ocean going vessels maintained by Lloyd's of London.
  - 12 – International Union of Railways.
  - 13 – International Civil Aviation Organization.
  - 14 – International Chamber of Shipping.
  - 15 – Reinsurance and Insurance Network.
  - 16 – Identifies the Dun & Bradstreet Corporation, United States.
  - 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
  - 18 – SAD = Single Administrative Document.
  - 19 – Federal Reserve Routing Code.
  - 20 – The container industry's international organisation responsible for the issuance of container-related codes.
  Showing 20 of 398 values defined for element 3055 in D14B.
8273 – Code specifying a dangerous goods regulation.
Type: an, Max Length: 3
Valid Codes:
- ADR – European agreement on the international carriage of dangerous goods on road. ADR is the abbreviation of "Accord europeen relatif au transport international des marchandises dangereuses par route".
- ADS – European agreement giving regulations for the transport of dangerous goods on the river Rhine, officially known as: "Accord europeen relatif au transport international des marchandises dangereuses par navigation sur le Rhin.".
- ADT – Canadian transport of dangerous goods requirements as published by Transport Canada in the Canadian Gazette, Part II.
- ADU – Regulation regarding the handling of dangerous goods on vessels issued by Japanese maritime safety agency.
- ADV – International Convention for the Prevention of Pollution from Ships, 1973, as modified by the Protocol of 1978 relating.
- ADW – The United Nations Globally Harmonized System of Classification and Labelling of Chemicals.
- AGS – Combined German and European regulations for the transportation of dangerous goods on German and other European roads. ADR means: Accord Europeen relatif au Transport international des marchandises Dangereuses par Route. GGVS means: Gefahrgutverordnung Strasse.
- ANR – Regulations for dangerous goods transportation on the Rhine.
- ARD – Combined European regulations for the combined transportation of dangerous goods on roads and rails. ARD means: Autorisation de transport par Route de matieres dangereuses. RID means: Reglement International concernant le transport des marchandises Dangereuses par chemin de fer.
- CFR – United States federal regulations issued by the US Department of transportation covering the domestic transportation of dangerous goods by truck, rail, water and air.
- COM – Combined German and European regulations for the combined transportation of dangerous goods on German and other European roads and rails. ADR means: Accord Europeen relatif au transport international des marchandises Dangereuse par Route. RID means: Reglement International concernant le transport des marchandises Dangereuses par chemin de fer. GGVS means: Gefahrgutverordnung Strasse. GGVE means: Gefahrgutverordnung Eisenbahn.
- GVE – German regulation for the transportation of dangerous goods on rail.
- GVS – German regulation for the transportation of dangerous goods on road.
- ICA – Regulations covering the international transportation of dangerous goods issued by the International Air Transport Association and the International Civil Aviation Organization.
- IMD – Regulations regarding the transportation of dangerous goods on ocean-going vessels issued by the International Maritime Organization.
- RGE – Combined German and European regulations for the transportation of dangerous goods on German and other European rails. RID means: Reglement International concernant le transport des marchandises Dangereuses par chemin de fer. GGVE means: Gefahrgutverordnung Eisenbahn.
- RID – International regulations concerning the international carriage of dangerous goods by rail. RID is the abbreviation of "Reglement International concernant le transport des marchandises Dangereuses par chemin de fer".
- UI – The United Kingdom (UK) version of the International Maritime Organisation (IMO) book on dangerous goods.
- ZZZ – Additional and/or other information for the transportation of dangerous goods which are mutually defined.
8339 – Code specifying the level of danger for which the packaging must cater.
Type: an, Max Length: 3
Valid Codes:
- 1 – Packaging meeting criteria to pack hazardous materials with great danger. Group I according to IATA/IMDG/ADR/RID regulations.
- 2 – Packaging meeting criteria to pack hazardous materials with medium danger. Group II according to IATA/IDMG/ADR/RID regulations.
- 3 – Packaging meeting criteria to pack hazardous materials with minor danger. Group III according to IATA/IDMG/ADR/RID regulations.
- 4 – No packaging danger level has been assigned.
8364 – To identify the emergency procedure number for ships transporting dangerous goods. Synonym: EMS Number.
Type: an, Max Length: 8
8410 – To identify a Medical First Aid Guide (MFAG) for hazardous goods.
Type: an, Max Length: 4
8126 – To identify a transport emergency (TREM) card.
Type: an, Max Length: 10
8255 – Code specifying a type of packing instruction.
Type: an, Max Length: 3
8179 – Code specifying the means of transport.
Type: an, Max Length: 8
Valid Codes:
- 1 – Tricycle with a basket for delivering goods.
8211 – Code specifying the authorisation for the transportation of hazardous cargo.
Type: an, Max Length: 3

QTY To specify a pertinent quantity. (Max 1)

Elements and codes as defined at QTY above.

FTX To provide free form or coded text information. (Max 5)

Elements and codes as defined at FTX above.

Group SG23 (Max 9999)

PCI To specify markings and labels on individual packages or physical units. (Max 1) Required

Elements and codes as defined at PCI above.

CDI To describe a physical or logical state. (Max 1)

Elements and codes as defined at CDI above.

DTM To specify date, and/or time, or period. (Max 5)

Elements and codes as defined at DTM above.

QTY To specify a pertinent quantity. (Max 1)

Elements and codes as defined at QTY above.

MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 10)

Elements and codes as defined at MEA above.

Group SG24 (Max 10)

GIN To give specific identification numbers, either as single numbers or ranges. (Max 1) Required

Elements and codes as defined at GIN above.

CDI To describe a physical or logical state. (Max 1)

Elements and codes as defined at CDI above.

DLM To specify limitations on deliveries. (Max 999)

Elements and codes as defined at DLM above.

Group SG25 (Max 10)

HAN To specify handling and where necessary, notify hazards. (Max 1) Required

Elements and codes as defined at HAN above.

FTX To provide free form or coded text information. (Max 5)

Elements and codes as defined at FTX above.

GIN To give specific identification numbers, either as single numbers or ranges. (Max 9999)

Elements and codes as defined at GIN above.

CNT To provide control total. (Max 1)

C270 – Control total for checking integrity of a message or part of a message.
- 6069 – Code qualifying the type of control of hash total.
  Type: an, Max Length: 3 (Required)
  Valid Codes:
  - 1 – Algebraic total of the quantity values in line items in a message.
  - 2 – Total number of line items in the message.
  - 3 – Total number of line and sub items in the message.
  - 4 – Number of lines on an invoice.
  - 5 – Total number of occurrences of the Customs item detail section within a single Customs declaration message.
  - 6 – Number of entries which are subject to the same Customs procedures, and have the same tariff or statistical heading, country and duty regime.
  - 7 – Code to indicate total gross weight of a consignment.
  - 8 – Total number of pieces.
  - 9 – The total number of Unit Load Devices mentioned in the message.
  - 10 – The total number of consignments.
  - 11 – [7370] Count of total number of packages referred to as one consignment.
  - 12 – [5214] Amount, debited by the seller and being the total of related article item amounts in a commercial invoice.
  - 13 – [1166] The number of loading lists, manifests or similar documents.
  - 14 – Commercial detail section within a single Customs declaration message.
  - 15 – The total cube of consignment.
  - 16 – (8046) Total number of equipment mentioned in the message.
  - 17 – [5070] Total value declared for Customs purposes of all goods in a consignment, whether or not they are subject to the same Customs procedure, or have the same tariff/statistical heading, country information, and duty regime.
  - 18 – Total reported quantity in net weight.
  - 19 – Total reported quantity in supplementary units.
  - 20 – Hash total of the total monetary amounts reported on the invoices.
  Showing 20 of 61 values defined for element 6069 in D14B.
- 6066 – To specify the value of a control quantity.
  Type: n, Max Length: 18 (Required)
- 6411 – Code specifying the unit of measurement.
  Type: an, Max Length: 8

UNT Unknown Segment (Max 1) Required

Sources and further reading

GS1 EDI standards GS1 guidance on EDI standards used for supply-chain document exchange.
UNECE introduction to UN/EDIFACT United Nations guidance on UN/EDIFACT for structured business data exchange.
X12 EDI standards Official X12 standards body for North American EDI transaction standards.
OpenPeppol post-award specifications OpenPeppol documentation for e-procurement and e-invoicing specifications.

UN/EDIFACT D14B ITRRPT Message

Jump to Segment

UNH Unknown Segment (Max 1) Required

BGM To indicate the type and function of a message and to transmit the identifying number. (Max 1) Required

DTM To specify date, and/or time, or period. (Max 10)

MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 5)

CUX To specify currencies used in the transaction and relevant details for the rate of exchange. (Max 9)

Group SG1 (Max 10)

RFF To specify a reference. (Max 1) Required

DTM To specify date, and/or time, or period. (Max 5)

Group SG2 (Max 10)

NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required

LOC To identify a place or a location and/or related locations. (Max 10)

Group SG3 (Max 10)

RFF To specify a reference. (Max 1) Required

DTM To specify date, and/or time, or period. (Max 5)

Group SG4 (Max 10)

CTA To identify a person or a department to whom communication should be directed. (Max 1) Required

COM To identify a communication number of a department or a person to whom communication should be directed. (Max 5)

Group SG5 (Max 10)

TDT To specify information regarding the transport such as mode of transport, means of transport, its conveyance reference number and the identification of the means of transport. (Max 1) Required

PCD To specify percentage information. (Max 5)

Group SG6 (Max 10)

LOC To identify a place or a location and/or related locations. (Max 1) Required

DTM To specify date, and/or time, or period. (Max 10)

Group SG7 (Max 10)

EQD To identify a unit of equipment. (Max 1) Required

MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 5)

SEL To specify the seal number or a range of seal numbers. (Max 99)

EQA To specify attached or related equipment. (Max 5)

PCD To specify percentage information. (Max 5)

Group SG8 (Max 10)

HAN To specify handling and where necessary, notify hazards. (Max 1) Required

FTX To provide free form or coded text information. (Max 10)

Group SG9 (Max 99) Required

GEI To identify processing information. (Max 1) Required

CDI To describe a physical or logical state. (Max 1)

DTM To specify date, and/or time, or period. (Max 10)

ALI To indicate that special conditions due to the origin, customs preference, fiscal or commercial factors are applicable. (Max 5)

MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 5)

MOA To specify a monetary amount. (Max 5)

Group SG10 (Max 10) Required

RFF To specify a reference. (Max 1) Required

DTM To specify date, and/or time, or period. (Max 1)

Group SG11 (Max 10)

NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required

LOC To identify a place or a location and/or related locations. (Max 10)

Group SG12 (Max 10)

RFF To specify a reference. (Max 1) Required

DTM To specify date, and/or time, or period. (Max 1)

Group SG13 (Max 10)

CTA To identify a person or a department to whom communication should be directed. (Max 1) Required

COM To identify a communication number of a department or a person to whom communication should be directed. (Max 5)

Group SG14 (Max 10)

TOD To specify terms of delivery or transport. (Max 1) Required

LOC To identify a place or a location and/or related locations. (Max 5)

FTX To provide free form or coded text information. (Max 5)

Group SG15 (Max 9999)

CPS To identify the sequence in which physical packing is presented in the consignment, and optionally to identify the hierarchical relationship between packing layers. (Max 1) Required

FTX To provide free form or coded text information. (Max 5)

Group SG16 (Max 9999)

PAC To describe the number and type of packages/physical units. (Max 1) Required

MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 10)

QTY To specify a pertinent quantity. (Max 10)

Group SG17 (Max 10)

HAN To specify handling and where necessary, notify hazards. (Max 1) Required

FTX To provide free form or coded text information. (Max 10)

Group SG18 (Max 9999)

PCI To specify markings and labels on individual packages or physical units. (Max 1) Required

RFF To specify a reference. (Max 1)

CDI To describe a physical or logical state. (Max 1)

DTM To specify date, and/or time, or period. (Max 5)

Group SG19 (Max 99)

GIN To give specific identification numbers, either as single numbers or ranges. (Max 1) Required

CDI To describe a physical or logical state. (Max 1)

DLM To specify limitations on deliveries. (Max 999)

Group SG20 (Max 1)

LIN To identify a line item and configuration. (Max 1) Required

PIA To specify additional or substitutional item identification codes. (Max 10)

IMD To describe an item in either an industry or free format. (Max 99)