UN/EDIFACT D09B GOVCBR Message
Review the GOVCBR segment sequence, mandatory fields, repeat counts and valid codes for the D09B EDIFACT directory.
UNH Unknown Segment (Max 1) Required
BGM To indicate the type and function of a message and to transmit the identifying number. (Max 1) Required
-
C002 – Identification of a type of document/message by code or name. Code preferred.
-
1001 – Code specifying the document name.
Type: an, Max Length: 3Valid Codes:1– Certificate providing the values of an analysis.2– Certificate certifying the conformity to predefined definitions.3– Certificate certifying the quality of goods, services etc.4– Report providing the results of a test session.5– Report specifying the performance values of products.6– Report providing specification values of products.7– Reports on events during production process.8– Document/message describes the test report of the first sample.9– A document/message to enable the transmission of information regarding pricing and catalogue details for goods and services offered by a seller to a buyer.10– Document/message providing basic data concerning a party.11– A pre-approved document relating to federal label approval requirements.12– Certificate certifying a specific quality of agricultural products.13– Document/message which evidences the transport of goods by post (e.g. mail, parcel, etc.).14– Certificate certifying the weight of goods.15– Document/message specifying the weight of goods.16– Document by means of which the documentary credit applicant specifies the conditions for the certificate and by whom the certificate is to be issued.17– Document identifying goods in which the issuing authority expressly certifies that the goods originate in a specific country or part of, or group of countries. It also states the price and/or cost of the goods with the purpose of determining the customs origin.18– Specific form of transit declaration issued by the exporter (movement certificate).19– Certificate certifying the quantity of goods, services etc.20– Usage of QALITY-message.
Showing 20 of 662 values defined for element 1001 in D09B.
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
1000 – Name of a document.
Type: an, Max Length: 35
-
1001 – Code specifying the document name.
-
C106 – Identification of a document/message by its number and eventually its version or revision.
-
1004 – To identify a document.
Type: an, Max Length: 70 -
1056 – To identify a version.
Type: an, Max Length: 9 -
1060 – To identify a revision.
Type: an, Max Length: 6
-
1004 – To identify a document.
-
1225 – Code indicating the function of the message.
Type: an, Max Length: 3Valid Codes:1– Message cancelling a previous transmission for a given transaction.2– Message containing items to be added.3– Message containing items to be deleted.4– Message containing items to be changed.5– Message replacing a previous message.6– Message confirming the details of a previous transmission where such confirmation is required or recommended under the terms of a trading partner agreement.7– The message is a duplicate of a previously generated message.8– Code indicating that the referenced message is a status.9– Initial transmission related to a given transaction.10– Message whose reference number is not filed.11– Message responding to a previous message or document.12– Message indicating that the referenced message was received but not yet processed.13– Code indicating that the referenced message is a request.14– Code indicating that the information contained in the message is an advance notification of information to follow.15– Repeated message transmission for reminding purposes.16– Message content is a proposal.17– Referenced transaction cancelled, reissued message will follow.18– New issue of a previous message (maybe cancelled).19– Change information submitted by buyer but initiated by seller.20– Message to replace the heading of a previous message.
Showing 20 of 65 values defined for element 1225 in D09B.
-
4343 – Code specifying the type of acknowledgment required or transmitted.
Type: an, Max Length: 3Valid Codes:AA– Receiver of the payment message needs to return a debit advice in response to the payment message.AB– Indicates that an acknowledgement relating to receipt of message is required.AC– Acknowledge complete including changes.AD– Acknowledge complete without changes.AE– A debit advice is requested for each transaction in the message.AF– The sender wishes to receive both a Debit Advice and an acknowledgement of receipt for a payment message.AG– Authentication, by a party, of a document established for him by another party.AH– A debit advice and message acknowledgement are requested for each transaction in the message.AI– Acknowledgement of changes only is required.AJ– Indication that the referenced offer or transaction (e.g. cargo booking or quotation request) is being dealt with.AP– Indication that the referenced offer or transaction (e.g., cargo booking or quotation request) has been accepted.AQ– The sender of the message expects a response.AR– Documentary credit collection forwarded directly.AS– The receiver of the message is to acknowledge receipt of the message and sent a credit advice for each credit.CA– Indication that the referenced offer or transaction (e.g., cargo booking or quotation request) has been accepted under conditions indicated in this message.CO– Indication that the message contains the physical measurements on which the charges will be based.NA– Specifies that no acknowledgement is needed in response to this message.RE– Indication that the referenced offer or transaction (e.g., cargo booking or quotation request) is not accepted.UR– The message recipient is to send a credit advice in response to the message.US– An acknowledgement is requested when an error occurred.
Showing 20 of 23 values defined for element 4343 in D09B.
DTM To specify date, and/or time, or period. (Max 9)
-
C507 – Date and/or time, or period relevant to the specified date/time/period type.
-
2005 – Code qualifying the function of a date, time or period.
Type: an, Max Length: 3 (Required)Valid Codes:1– Actual date/time on which the service was completed.2– Date on which buyer requests goods to be delivered.3– [2377] Date of issue of an invoice.4– [2011] Date of order.5– A period of time when saleable stocks are expected to cover demand for a product.6– The date an entity moved from a location.7– (2069) Date and/or time at which specified event or document becomes effective.8– Date/time when the purchase order is received by the seller.9– Date/time of processing.10– Date on which goods should be shipped or despatched by the supplier.11– (2170) Date/time on which the goods are or are expected to be despatched or shipped.12– Date by which payment should be made if discount terms are to apply.13– Date by which payment must be made.14– Date/time when instalments are due.15– Date/time when promotion activities begin.16– Date/time when promotion activities end.17– Date and/or time when the shipper of the goods expects delivery will take place.18– The date/time/period of the act, or an instance of installing something or someone.19– Period of time between slaughter and delivery during which meat is ageing.20– Date/time when cheque is issued.
Showing 20 of 779 values defined for element 2005 in D09B.
-
2380 – The value of a date, a date and time, a time or of a period in a specified representation.
Type: an, Max Length: 35 -
2379 – Code specifying the representation of a date, time or period.
Type: an, Max Length: 3Valid Codes:2– Calendar date: D = Day; M = Month; Y = Year.3– Calendar date: M = Month; D = Day; Y = Year.4– Calendar date C=Century; Y=Year; M=Month; D=Day.5– Calendar date and time: C=Century; Y=Year; M=Month; D=Day; H=Hour; M=Minute.6– Half-month: CC=century YY=year MM=month, B=1:first half month, B=2:second half month.7– Week within a calendar month: CC=century YY=year MM=month. W=1-5 first week to fifth week in a month.8– Shift within a calendar day: CC=century YY=year MM=month DD=day S=1-9 shift in a day.9– Time period within a calendar day: CC=century YY=year MM=month DD=day PP=00-99 time period.10– Calendar date including time with minutes: C=Century; Y=Year; M=Month; D=Day; T=Time designator; H=Hour; M=Minutes. The character [T] shall be used as time designator to indicate the start of the representation of the time. For example: 20010912T1433.101– Calendar date: Y = Year; M = Month; D = Day.102– Calendar date: C = Century ; Y = Year ; M = Month ; D = Day.103– Calendar week day: Y = Year ; W = Week ; D = Day Week number 01 is always first week of January Day number 1 is always Monday.104– A period of time specified by giving the start week of a month followed by the end week of a month. Data is to be transmitted as consecutive characters without hyphen.105– Calendar day: Y = Year ; D = Day January the first = Day 001 Always start numbering the days of the year from January 1st through December 31st.106– Day of a month: M = Month; D = Day.107– Day's number within a specific year: D = Day.108– Week's number within a specific year: W = Week.109– Month's number within a specific year: M = Month.110– Day's number within is a specific month: D = Day.201– Calendar date including time without seconds: Y = Year; M = Month; D = Day; H = Hour; M = Minute.
Showing 20 of 81 values defined for element 2379 in D09B.
-
2005 – Code qualifying the function of a date, time or period.
MOA To specify a monetary amount. (Max 1)
-
C516 – Amount of goods or services stated as a monetary amount in a specified currency.
-
5025 – Code qualifying the type of monetary amount.
Type: an, Max Length: 3 (Required)Valid Codes:1– First VAT value if, for the same rate of VAT, there are 1 to 3 different ways to set this value.2– Second VAT value if, for the same rate of VAT, there are 2 or 3 different ways to set this value.3– Third VAT value if, for the same rate of VAT, there are 3 different ways to set this value.4– Royalties relating to the imported goods that the buyer must pay, either directly or indirectly, as a condition of sale, to the extent that they are not included in the price actually paid or payable.5– The amount specified is the adjusted amount.6– The owing amount in the currency used as reference in the transaction.7– Charges which parties agreed upon.8– Total amount of allowance or charge.9– Amount to be paid.10– Indicates that the amount is based on the charged currency.11– Amount that has been paid.12– Amount which was remitted (see remittance advice).13– The amount is subject to a total monetary discount.14– The amount in the currency in which the amount is paid or has to be paid.15– The addition of the balance all accounts divided by the number of accounts.16– The fee that a bank charges for releasing monies.17– The complete quantity of anything needed for or made in one operation or lot.18– Fee charged by a broker for acting on behalf of a third party.19– Commission paid by the importer to his/her agent for the service of representing him/her in the purchase.20– Value of data contained on the carrier media (e.g. magnetic tape).
Showing 20 of 541 values defined for element 5025 in D09B.
-
5004 – To specify a monetary amount.
Type: n, Max Length: 35 -
6345 – Code specifying a monetary unit.
Type: an, Max Length: 3 -
6343 – Code qualifying the type of currency.
Type: an, Max Length: 3Valid Codes:1– The currency of the monetary unit involved in the transaction for customs valuation.2– The currency of the monetary unit involved in the transaction for insurance purposes.3– The currency of the local monetary unit.4– The currency of the monetary unit used for calculation in an invoice.5– The currency of the monetary unit of an account.6– The currency of the monetary unit to be converted from.7– The currency of the monetary unit to be converted into.8– The currency of the monetary unit used in a price list.9– The currency of the monetary unit used in an order.10– The currency of the monetary unit used for pricing purposes.11– The currency of the monetary unit used for payment.12– The currency of the monetary unit used in a quotation.13– The currency of the local monetary unit at recipient's location.14– The currency of the monetary unit normally used by the supplier.15– The currency of the local monetary unit at sender's location.16– The currency as per tariff.17– The currency in which the charges are calculated.18– The currency in which tax amounts are due or have been paid.
-
4405 – Code specifying a status.
Type: an, Max Length: 3Valid Codes:1– Remark that the requested service in the order remains outstanding.2– The instruction has been completed.3– The information has been passed on.4– The amount has the status of finality.5– The amount is subject to finality.6– The amount quoted is a minimum tariff.7– The amount quoted is a fixed tariff.8– The amount quoted is a maximum tariff.9– The amount is quoted for information only, it is not part of the charges to be deducted or added.10– The amount is available today.11– The amount is available on the next banking office day after the booking date.12– The amount is available on the second banking office day after the booking date.13– The amount available on the third banking office day after the booking date.14– Funds not collected by beneficiary.15– The amount or quantity is zero.16– No status or condition has been advised.17– A status or condition has been requested.18– No charge is to be made.19– The quantity has been the subject of a rounding operation.20– Intended to last or function indefinitely.
Showing 20 of 145 values defined for element 4405 in D09B.
-
5025 – Code qualifying the type of monetary amount.
IFD To specify details about items of information. (Max 9)
-
C009 – To specify the category of information.
-
9615 – Code specifying the information category.
Type: an, Max Length: 3 -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
9614 – Free form description of the category of information.
Type: an, Max Length: 70
-
9615 – Code specifying the information category.
-
C010 – To specify the type of information.
-
4473 – Code specifying a type of information.
Type: an, Max Length: 4 -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
4472 – Text representation of a type of information.
Type: an, Max Length: 35
-
4473 – Code specifying a type of information.
-
C011 – To provide the information details.
-
9617 – Code specifying the information detail.
Type: an, Max Length: 17 -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
9616 – Free form description of the information detail.
Type: an, Max Length: 256
-
9617 – Code specifying the information detail.
-
9633 – Code qualifying the information details.
Type: an, Max Length: 3Valid Codes:1– Identifies information related to the business.
-
4405 – Code specifying a status.
Type: an, Max Length: 3Valid Codes:1– Remark that the requested service in the order remains outstanding.2– The instruction has been completed.3– The information has been passed on.4– The amount has the status of finality.5– The amount is subject to finality.6– The amount quoted is a minimum tariff.7– The amount quoted is a fixed tariff.8– The amount quoted is a maximum tariff.9– The amount is quoted for information only, it is not part of the charges to be deducted or added.10– The amount is available today.11– The amount is available on the next banking office day after the booking date.12– The amount is available on the second banking office day after the booking date.13– The amount available on the third banking office day after the booking date.14– Funds not collected by beneficiary.15– The amount or quantity is zero.16– No status or condition has been advised.17– A status or condition has been requested.18– No charge is to be made.19– The quantity has been the subject of a rounding operation.20– Intended to last or function indefinitely.
Showing 20 of 145 values defined for element 4405 in D09B.
RFF To specify a reference. (Max 99999)
-
C506 – Identification of a reference.
-
1153 – Code qualifying a reference.
Type: an, Max Length: 3 (Required)Valid Codes:AAA– (1018) Reference number identifying the acknowledgement of an order.AAB– [1088] Reference number to identify a proforma invoice.AAC– [1172] Reference number to identify a documentary credit.AAD– [1318] Reference number to identify an addendum to a contract.AAE– Reference number assigned to a goods declaration.AAF– A reference number identifying a debit card.AAG– (1332) Reference number assigned by issuing party to an offer.AAH– Reference number allocated by the bank to a batch of different underlying interbank transactions.AAI– Reference number allocated by the bank to one specific interbank transaction.AAJ– Reference number assigned by issuer to a delivery order.AAK– Reference number assigned by issuing party to a despatch advice.AAL– Reference number identifying a specific product drawing.AAM– Reference number assigned to a waybill, see: 1001 = 700.AAN– Reference number assigned by buyer to a delivery schedule.AAO– [1362] Reference number assigned by the consignee to identify a particular consignment.AAP– [1310] Identifier of a shipment which is part of an order.AAQ– [8260] To identify a piece if transport equipment e.g. container or unit load device.AAR– A reference number assigned by a municipality to identify a business.AAS– [1188] Reference number to identify a document evidencing a transport contract.AAT– Identifies the master label number of any package type.
Showing 20 of 777 values defined for element 1153 in D09B.
-
1154 – Identifies a reference.
Type: an, Max Length: 70 -
1156 – To identify a line of a document.
Type: an, Max Length: 6 -
1056 – To identify a version.
Type: an, Max Length: 9 -
1060 – To identify a revision.
Type: an, Max Length: 6
-
1153 – Code qualifying a reference.
CUX To specify currencies used in the transaction and relevant details for the rate of exchange. (Max 9)
-
C504 – The usage to which a currency relates.
-
6347 – Code qualifying the usage of a currency.
Type: an, Max Length: 3 (Required)Valid Codes:1– The currency in which charges are to be paid.2– The currency applicable to amounts stated. It may have to be converted.3– The currency which should be used to the target destination of the transaction.4– Currency applicable to amounts stated in a transport document/message.5– Currency on which the calculation is based.6– Additional currency the message recipient needs for information purposes. The actual message amount(s) is/are not based upon this currency.7– Currency in which the account is held.
-
6345 – Code specifying a monetary unit.
Type: an, Max Length: 3 -
6343 – Code qualifying the type of currency.
Type: an, Max Length: 3Valid Codes:1– The currency of the monetary unit involved in the transaction for customs valuation.2– The currency of the monetary unit involved in the transaction for insurance purposes.3– The currency of the local monetary unit.4– The currency of the monetary unit used for calculation in an invoice.5– The currency of the monetary unit of an account.6– The currency of the monetary unit to be converted from.7– The currency of the monetary unit to be converted into.8– The currency of the monetary unit used in a price list.9– The currency of the monetary unit used in an order.10– The currency of the monetary unit used for pricing purposes.11– The currency of the monetary unit used for payment.12– The currency of the monetary unit used in a quotation.13– The currency of the local monetary unit at recipient's location.14– The currency of the monetary unit normally used by the supplier.15– The currency of the local monetary unit at sender's location.16– The currency as per tariff.17– The currency in which the charges are calculated.18– The currency in which tax amounts are due or have been paid.
-
6348 – To specify the value of the multiplication factor used in expressing currency units.
Type: n, Max Length: 4
-
6347 – Code qualifying the usage of a currency.
-
C504 – The usage to which a currency relates.
-
6347 – Code qualifying the usage of a currency.
Type: an, Max Length: 3 (Required)Valid Codes:1– The currency in which charges are to be paid.2– The currency applicable to amounts stated. It may have to be converted.3– The currency which should be used to the target destination of the transaction.4– Currency applicable to amounts stated in a transport document/message.5– Currency on which the calculation is based.6– Additional currency the message recipient needs for information purposes. The actual message amount(s) is/are not based upon this currency.7– Currency in which the account is held.
-
6345 – Code specifying a monetary unit.
Type: an, Max Length: 3 -
6343 – Code qualifying the type of currency.
Type: an, Max Length: 3Valid Codes:1– The currency of the monetary unit involved in the transaction for customs valuation.2– The currency of the monetary unit involved in the transaction for insurance purposes.3– The currency of the local monetary unit.4– The currency of the monetary unit used for calculation in an invoice.5– The currency of the monetary unit of an account.6– The currency of the monetary unit to be converted from.7– The currency of the monetary unit to be converted into.8– The currency of the monetary unit used in a price list.9– The currency of the monetary unit used in an order.10– The currency of the monetary unit used for pricing purposes.11– The currency of the monetary unit used for payment.12– The currency of the monetary unit used in a quotation.13– The currency of the local monetary unit at recipient's location.14– The currency of the monetary unit normally used by the supplier.15– The currency of the local monetary unit at sender's location.16– The currency as per tariff.17– The currency in which the charges are calculated.18– The currency in which tax amounts are due or have been paid.
-
6348 – To specify the value of the multiplication factor used in expressing currency units.
Type: n, Max Length: 4
-
6347 – Code qualifying the usage of a currency.
-
5402 – To specify the rate at which one specified currency is expressed in another specified currency.
Type: n, Max Length: 12 -
6341 – To identify an exchange rate currency market.
Type: an, Max Length: 3Valid Codes:AAA– The currency exchange rate is set by the Paris exchange.AAB– The currency exchange rate is set by the Central Bank of Colombia.AMS– The currency exchange rate is set by the Amsterdam exchange.ARG– Argentina exchange.AST– The currency exchange rate is set by the Australian exchange.AUS– Wiener Boersenkammer.BEL– Commission de la Bourse Bruxelles.CAN– The currency exchange rate is set by the Toronto exchange.CAR– The currency exchange rate is set by a written or spoken agreement between two or more parties.CIE– Currency rates published by the US Customs Information Exchange, 6 WTC, New York NY 10048-0945, USA.DEN– Koebenhavns Fondsboers.ECR– The currency exchange rate is set for a length of time by the European Community.FIN– The currency exchange rate is set by the Helsinki exchange.FRA– The currency exchange rate is set by the Frankfurt exchange.IMF– The currency exchange rate is set by the International Monetary Fund.LNF– The currency exchange rate is set by the London exchange at the first closing.LNS– The currency exchange rate is set by the London exchange at the second closing.MIL– The currency exchange rate is set by the Milan exchange.NOR– The currency exchange rate is set by the Oslo exchange.NYC– The currency exchange rate is set by the New York exchange.
Showing 20 of 24 values defined for element 6341 in D09B.
FII To identify an account and a related financial institution. (Max 1)
-
C078 – Identification of an account holder by account number and/or account holder name in one or two lines. Number preferred.
-
3194 – To identify the holder of an account.
Type: an, Max Length: 35 -
3192 – Name of the holder of an account.
Type: an, Max Length: 35 -
3192 – Name of the holder of an account.
Type: an, Max Length: 35 -
6345 – Code specifying a monetary unit.
Type: an, Max Length: 3
-
3194 – To identify the holder of an account.
-
C088 – Identification of a financial institution by code branch number, or name and name of place. Code or branch number preferred.
-
3433 – Code specifying the name of an institution.
Type: an, Max Length: 11 -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
3434 – To identify a branch of an institution.
Type: an, Max Length: 17 -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
3432 – Name of an institution.
Type: an, Max Length: 70 -
3436 – Name of the location of a branch of an institution.
Type: an, Max Length: 70
-
3433 – Code specifying the name of an institution.
-
3035 – Code giving specific meaning to a party.
Type: an, Max Length: 3 (Required)Valid Codes:AA– Party to be billed in accordance with AAR Accounting rule 11.AB– Third party who arranged the purchase of merchandise on behalf of the actual buyer.AE– Any natural or legal person who makes a declaration to an official body on behalf of another natural or legal person, where legally permitted (CCC).AF– Natural or legal person responsible for the satisfactory performance of a Customs transit operation. Source: CCC.AG– (3196) Party authorized to act on behalf of another party. Synonym: Representative.AH– Agent acting on behalf of the transit principal (CCC).AI– Person who has been chosen for a job.AJ– The party which has issued all mutually agreed codes used in the message.AK– Party to whom acknowledgement should be sent.AL– (3340) Party accepting liability for goods held or moving (e.g. transit) under a Customs authorization and - when applicable - a guarantee.AM– Employee of a company or firm authorized to act on behalf of that company or firm e.g. to make a Customs declaration.AN– Person or company which is authorised by the relevant Customs authority to import goods without payment all taxes or specific taxes at the point of entry into the country.AO– Party account is assigned to.AP– (3336) Party accepting goods, products, services, etc.AQ– Person or company approved by the relevant authority in the country to pack and export specific goods under Customs supervision.AR– Exporter authorized/approved by Customs for special Customs procedures e.g. simplified procedure.AS– Identifies the financial institution servicing the account(s).AT– Importer authorized/approved by Customs for special Customs procedures e.g. simplified procedure.AU– Trader authorized/approved by Customs for special transit procedures e.g. simplified procedure.AV– Party that has delegated the authority to take a certain action on behalf of a company or agency.
Showing 20 of 589 values defined for element 3035 in D09B.
-
3207 – Identification of the name of the country or other geographical entity as defined in ISO 3166-1 and UN/ECE Recommendation 3.
Type: an, Max Length: 3
Group SG1 (Max 99)
LOC To identify a place or a location and/or related locations. (Max 1) Required
-
C517 – Identification of a location by code or name.
-
3225 – To identify a location.
Type: an, Max Length: 35 -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
3224 – Name of the location.
Type: an, Max Length: 256
-
3225 – To identify a location.
-
C519 – Identification the first related location by code or name.
-
3223 – To identify a first related location.
Type: an, Max Length: 35 -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
3222 – Name of first related location.
Type: an, Max Length: 70
-
3223 – To identify a first related location.
-
C553 – Identification of second related location by code or name.
-
3233 – To identify a second related location.
Type: an, Max Length: 35 -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
3232 – Name of the second related location.
Type: an, Max Length: 70
-
3233 – To identify a second related location.
-
3227 – Code identifying the function of a location.
Type: an, Max Length: 3 (Required)Valid Codes:1– (3018) Point or port of departure, shipment or destination, as required under the applicable terms of delivery, e.g. Incoterms.2– [3109] To identify the place where the payment has been or should be made.3– Place where equipment tare has been or must be checked for official assessment.4– Place at which the goods have been received.5– (3214) Port, airport or other location from which a means of transport or transport equipment is scheduled to depart or has departed.6– A bed in a ward.7– (3246) Place to which the goods are to be finally delivered under transport contract terms (operational term).8– Port, airport or other location to which a means of transport or transport equipment is destined.9– [3334] Seaport, airport, freight terminal, rail station or other place at which the goods (cargo) are loaded on to the means of transport being used for their carriage.10– [3348] Place where the goods are taken over by the carrier.11– [3392] Seaport, airport, freight terminal, rail station or other place at which goods are unloaded from the means of transport having been used for their carriage.12– Port at which the goods are discharged from the vessel used for their transport.13– [3424] Place where goods are to be or have been transferred from one means of transport to another during the course of one transport operation.14– [3385] To identify the place where a goods item is located.15– Place where the responsibility is transferred.16– Place where the ownership of the goods is transferred.17– Place where goods are transported across a country border.18– [3156] Warehouse where a particular consignment is to be or has been stored.19– Factory/plant relevant for a particular consignment.20– Place where goods will ultimately be delivered.
Showing 20 of 297 values defined for element 3227 in D09B.
-
5479 – Code specifying a relation.
Type: an, Max Length: 3
DTM To specify date, and/or time, or period. (Max 9)
Elements and codes as defined at DTM above.
Group SG2 (Max 99)
GEI To identify processing information. (Max 1) Required
-
C012 – Identification of the processing indicator.
-
7365 – Code specifying a processing indicator.
Type: an, Max Length: 3Valid Codes:1– Content of message is accepted.2– Content of message is rejected, with comment.3– Content of message is rejected, without comment.4– Specified goods have been released from Customs control.5– Specified goods are required for examination.6– All document, or documents as specified, to be produced.7– Specified goods are detained.8– Specified goods may move under Customs transfer.9– Goods declaration is accepted, awaiting goods arrival.10– Declaration is requested.11– Information for pre-entry of a goods declaration.12– The sender is not allowed to send the message type which was sent.13– The message type is not supported by the recipient.14– Message conveys information on an error.15– Response after correction; correction has been approved.16– Response after correction; correction has not been approved.17– Message has been received.18– Request for clearance of the goods.19– Goods are in bulk.20– Commercial transaction will be paid by cash within a prescribed time frame.
Showing 20 of 173 values defined for element 7365 in D09B.
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
7364 – Free form description of a processing indicator.
Type: an, Max Length: 35
-
7365 – Code specifying a processing indicator.
-
9649 – Code qualifying the processing information.
Type: an, Max Length: 3 (Required)Valid Codes:1– To convey information related to the reporting of assets held by an entity.2– Identifies information about accounting data.3– Identifies information about the scheduling type.4– Identifies information about the party type.5– Identifies information about the consignment type.6– Defines information required to process the contents of a statistical array.
-
7187 – Code specifying a type of process.
Type: an, Max Length: 17Valid Codes:1– A process to prepare wood.2– Treatment with a caustic agent.3– A process of digesting.4– Washing with brownstock.5– Removing colour by treatment with an oxidizing agent (a bleach).6– The process of drying pulp.7– Freezing process.8– The information to be processed is in structured form.9– The information to be processed is identical and given in structured and unstructured form.10– The information to be processed is different and is given in structured and unstructured form.11– The information to be processed is in unstructured form.12– Slaughter process.13– Packing process.14– Treated by heat sterilisation.15– Treated by chemical sterilisation.16– Treated by fumigation.17– Treated by irradiation.18– Fueling process.19– Code specifying the process of accepting the terms and conditions under which business will be conducted.20– The provision of a pathology service.
Showing 20 of 101 values defined for element 7187 in D09B.
MOA To specify a monetary amount. (Max 99)
Elements and codes as defined at MOA above.
PYT To specify the terms of payment. (Max 99)
-
C019 – Terms of payment information.
-
4277 – Identification of the terms of payment between the parties to a transaction (generic term).
Type: an, Max Length: 17Valid Codes:1– Draft(s) must be drawn on the issuing bank.2– Draft(s) must be drawn on the advising bank.3– Draft(s) must be drawn on the reimbursing bank.4– Draft(s) must be drawn on the applicant.5– Draft(s) must be drawn on any other drawee.6– No drafts required.7– An indication that the payment means are specified in a commercial account summary.
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
4276 – Free form description of the conditions of payment between the parties to a transaction.
Type: an, Max Length: 35
-
4277 – Identification of the terms of payment between the parties to a transaction (generic term).
-
4279 – Code qualifying the type of payment terms.
Type: an, Max Length: 3 (Required)Valid Codes:1– Payment conditions normally applied.2– Payments are due at end of month.3– Payments are due on the fixed date specified.4– Payments are deferred beyond the normal due date.5– Payment terms on which discounts are not applicable.6– Different payment terms negotiated under a documentary credit.7– Payment is extended beyond the normal due date.8– Payment terms reflect the basic offered discount.9– Occurring in the next month after present.10– Payment is due on receipt of invoice.11– Payment terms to be chosen by buyer (from options separately advised).12– Payment due ten days after end of a calendar month.13– Seller will advise buyer of payment terms by separate transaction.14– Payments are to be made against statement.15– Payment terms have no charge.16– Payment terms are not yet defined.17– Payment is due the end of the current or specified month.18– Payment terms have been previously agreed upon.19– The payment terms require the use of United States funds.20– Payment terms on which penalties apply.
Showing 20 of 79 values defined for element 4279 in D09B.
-
2475 – Code specifying a time that references an event that will or has occurred.
Type: an, Max Length: 3Valid Codes:1– Payment time reference is date of order.2– Payment time reference is date of confirmation.3– Payment time reference is date of contract.4– Payment time reference is date of signature of contract.5– Payment time reference is date of invoice.6– Payment time reference is date of credit note.7– Payment time reference is date of present document.8– Payment time reference is date of confirmation received.9– Payment time reference is date of invoice received.11– Payment time reference is date of credit note received.12– Payment time reference is date of present document received.13– Payment time reference is date of resale by the buyer.14– Payment time reference is date of resale proceeds are collected by buyer. "buyer" is a retailer. Retailer will pay his supplier when having sold goods and money received.21– Payment time reference is date when goods are received by buyer.22– Payment time reference is date when goods are received by buyer's agent.23– Payment time reference is date when goods are received by carrier.24– Payment time reference is date when goods are leaving the sellers factory.25– Payment time reference is the date when goods are handed over for shipment by the seller or his agent.26– Date the transport arrived at the agreed destination.27– Date the goods are crossing the border of the exporters country.
Showing 20 of 64 values defined for element 2475 in D09B.
-
2009 – Code relating terms to a reference date, time or period.
Type: an, Max Length: 3Valid Codes:1– Payment terms related to reference date.2– Payment terms related to time before reference date.3– Payment terms related to time after reference date.4– Payment terms are at the end of the ten day period containing the reference date.5– Payment terms are at the end of the two week period containing the reference date.6– Payment terms are at the end of the month containing the reference date.7– Payment terms are at the end of the month following the month of reference date.8– Payment terms are at the end of the quarter containing the reference date.9– Payment terms are at the end of the year containing the reference date.10– Payment terms are at the end of the week containing the reference date.11– Payment terms are 10 days after the end of the referenced month.12– End of the half year in which the referred date falls.13– Payment terms related to a time inclusive of and after a reference date.14– Payment terms are at the end of the 15-day period containing the reference date.15– Payment terms are on or before.16– The payment terms are at, whichever is first, the 15th or the last day of the month following the payment terms period (payment terms period = period of time between the reference date and the theoretical due date).17– Payment terms related to a time after the end of the month containing the reference date.
-
2151 – Code specifying the type of period.
Type: an, Max Length: 3Valid Codes:3M– A subdivision of a year into four equal parts.6M– A subdivision of a year into two equal parts.AA– Flight duration irrespective of time zones.AD– Flight duration irrespective of time zones.CD– Period given as a number of days including weekends and holidays.CW– Period given as a number of 7day-weeks including holidays.D– The twenty-four hour period during which the earth completes one rotation on its axis.DC– Period of 10 days.F– A period of time lasting fourteen days. Synonym: Fortnight.H– One of the twenty-four sub-divisions of a day.HM– A subdivision of a month into two equal parts.M– One of twelve divisions of the year as determined by the Gregorian calendar.MN– A unit of time equal to 1/60 of an hour, or 60 seconds.P– A period of time, measured in monthly increments, consisting of four sequential months.S– A unit of time equal to 1/60 of a minute.SD– The voyage duration irrespective of time zones.SI– An indefinite period.W– Period of seven days.WD– Day on which work is usually done.WW– Monday through Friday.
Showing 20 of 22 values defined for element 2151 in D09B.
-
2152 – Count of the number of periods.
Type: n, Max Length: 3
Group SG3 (Max 9)
GOR To indicate the requirement for a specific governmental action and/or procedure or which specific procedure is valid for a specific part of the transport and cross-border transactions. (Max 1) Required
-
C232 – Function: To indicate the requirement for a specific governmental action and/or procedure or which specific procedure is valid for a specific part of the transport and cross-border transactions. (Note the red portion as change in the segment description.).
-
9415 – Code identifying a government agency.
Type: an, Max Length: 3Valid Codes:1– Government agency responsible for agriculture and e.g. the inspection of vegetable and animal substances being imported.2– Government agency responsible for the safe transport of ammunition.3– Government agency responsible for commerce both domestic and international.4– Government agency responsible for public safety on waterways.5– Customs authorities.6– Government agency responsible for the safety on food and drugs.7– Health authorities.8– Police authorities responsible for public safety in the harbour.9– Government agency responsible for immigration matters.10– Government agency responsible for the importation of live animals.11– Government or semi-government body responsible for port operations.12– Government body responsible for public health matters.13– Government agency responsible for transportation policy and other transportation matters.14– Government body responsible for the policing of the port.
-
9411 – Code indicating the requirement and status of governmental involvement.
Type: an, Max Length: 3Valid Codes:1– Instructions have been carried out.2– Procedures have been carried out as amended.3– Procedures have been completed.4– Instructions are not applicable.5– An action which is most desirable but not required.6– Procedures are required.7– Procedures are applicable.8– Indication by exporter that they need certificate of export from Customs.
-
9417 – Code specifying a type of government action such as inspection, detention, fumigation, security.
Type: an, Max Length: 3Valid Codes:1– The cargo will be or has been cleared.2– The cargo has been or will be detained.3– The cargo has been or will be fumigated.4– The cargo has been or will be inspected.5– The cargo has been or will be secured.6– The means of transport will be or has been admitted.7– The cargo hold has been or will be inspected.8– The container has been or will be inspected.9– The cargo packaging has been or will be inspected.10– Indication by exporter that they do not need certificate of export from Customs.
-
9353 – Code specifying a government procedure.
Type: an, Max Length: 3Valid Codes:1– Arrangements for inspection are not necessary because they were cleared before.2– All requirements for documents have been completed.3– Pertinent documents are required.4– Arrangements for inspection of the cargo have been completed.5– Arrangements for inspection of the cargo are required.6– Customs clearance not required.7– Arrangements for safeguarding the cargo have been completed.8– Arrangements for safeguarding the cargo are required.9– Arrangements for the security of the cargo are required.10– Arrangements for storing the cargo have been completed.11– Arrangements for storing the cargo are required.12– All arrangements for transport have been completed.13– Transport has to be arranged.
-
9415 – Code identifying a government agency.
-
C232 – Function: To indicate the requirement for a specific governmental action and/or procedure or which specific procedure is valid for a specific part of the transport and cross-border transactions. (Note the red portion as change in the segment description.).
-
9415 – Code identifying a government agency.
Type: an, Max Length: 3Valid Codes:1– Government agency responsible for agriculture and e.g. the inspection of vegetable and animal substances being imported.2– Government agency responsible for the safe transport of ammunition.3– Government agency responsible for commerce both domestic and international.4– Government agency responsible for public safety on waterways.5– Customs authorities.6– Government agency responsible for the safety on food and drugs.7– Health authorities.8– Police authorities responsible for public safety in the harbour.9– Government agency responsible for immigration matters.10– Government agency responsible for the importation of live animals.11– Government or semi-government body responsible for port operations.12– Government body responsible for public health matters.13– Government agency responsible for transportation policy and other transportation matters.14– Government body responsible for the policing of the port.
-
9411 – Code indicating the requirement and status of governmental involvement.
Type: an, Max Length: 3Valid Codes:1– Instructions have been carried out.2– Procedures have been carried out as amended.3– Procedures have been completed.4– Instructions are not applicable.5– An action which is most desirable but not required.6– Procedures are required.7– Procedures are applicable.8– Indication by exporter that they need certificate of export from Customs.
-
9417 – Code specifying a type of government action such as inspection, detention, fumigation, security.
Type: an, Max Length: 3Valid Codes:1– The cargo will be or has been cleared.2– The cargo has been or will be detained.3– The cargo has been or will be fumigated.4– The cargo has been or will be inspected.5– The cargo has been or will be secured.6– The means of transport will be or has been admitted.7– The cargo hold has been or will be inspected.8– The container has been or will be inspected.9– The cargo packaging has been or will be inspected.10– Indication by exporter that they do not need certificate of export from Customs.
-
9353 – Code specifying a government procedure.
Type: an, Max Length: 3Valid Codes:1– Arrangements for inspection are not necessary because they were cleared before.2– All requirements for documents have been completed.3– Pertinent documents are required.4– Arrangements for inspection of the cargo have been completed.5– Arrangements for inspection of the cargo are required.6– Customs clearance not required.7– Arrangements for safeguarding the cargo have been completed.8– Arrangements for safeguarding the cargo are required.9– Arrangements for the security of the cargo are required.10– Arrangements for storing the cargo have been completed.11– Arrangements for storing the cargo are required.12– All arrangements for transport have been completed.13– Transport has to be arranged.
-
9415 – Code identifying a government agency.
-
C232 – Function: To indicate the requirement for a specific governmental action and/or procedure or which specific procedure is valid for a specific part of the transport and cross-border transactions. (Note the red portion as change in the segment description.).
-
9415 – Code identifying a government agency.
Type: an, Max Length: 3Valid Codes:1– Government agency responsible for agriculture and e.g. the inspection of vegetable and animal substances being imported.2– Government agency responsible for the safe transport of ammunition.3– Government agency responsible for commerce both domestic and international.4– Government agency responsible for public safety on waterways.5– Customs authorities.6– Government agency responsible for the safety on food and drugs.7– Health authorities.8– Police authorities responsible for public safety in the harbour.9– Government agency responsible for immigration matters.10– Government agency responsible for the importation of live animals.11– Government or semi-government body responsible for port operations.12– Government body responsible for public health matters.13– Government agency responsible for transportation policy and other transportation matters.14– Government body responsible for the policing of the port.
-
9411 – Code indicating the requirement and status of governmental involvement.
Type: an, Max Length: 3Valid Codes:1– Instructions have been carried out.2– Procedures have been carried out as amended.3– Procedures have been completed.4– Instructions are not applicable.5– An action which is most desirable but not required.6– Procedures are required.7– Procedures are applicable.8– Indication by exporter that they need certificate of export from Customs.
-
9417 – Code specifying a type of government action such as inspection, detention, fumigation, security.
Type: an, Max Length: 3Valid Codes:1– The cargo will be or has been cleared.2– The cargo has been or will be detained.3– The cargo has been or will be fumigated.4– The cargo has been or will be inspected.5– The cargo has been or will be secured.6– The means of transport will be or has been admitted.7– The cargo hold has been or will be inspected.8– The container has been or will be inspected.9– The cargo packaging has been or will be inspected.10– Indication by exporter that they do not need certificate of export from Customs.
-
9353 – Code specifying a government procedure.
Type: an, Max Length: 3Valid Codes:1– Arrangements for inspection are not necessary because they were cleared before.2– All requirements for documents have been completed.3– Pertinent documents are required.4– Arrangements for inspection of the cargo have been completed.5– Arrangements for inspection of the cargo are required.6– Customs clearance not required.7– Arrangements for safeguarding the cargo have been completed.8– Arrangements for safeguarding the cargo are required.9– Arrangements for the security of the cargo are required.10– Arrangements for storing the cargo have been completed.11– Arrangements for storing the cargo are required.12– All arrangements for transport have been completed.13– Transport has to be arranged.
-
9415 – Code identifying a government agency.
-
C232 – Function: To indicate the requirement for a specific governmental action and/or procedure or which specific procedure is valid for a specific part of the transport and cross-border transactions. (Note the red portion as change in the segment description.).
-
9415 – Code identifying a government agency.
Type: an, Max Length: 3Valid Codes:1– Government agency responsible for agriculture and e.g. the inspection of vegetable and animal substances being imported.2– Government agency responsible for the safe transport of ammunition.3– Government agency responsible for commerce both domestic and international.4– Government agency responsible for public safety on waterways.5– Customs authorities.6– Government agency responsible for the safety on food and drugs.7– Health authorities.8– Police authorities responsible for public safety in the harbour.9– Government agency responsible for immigration matters.10– Government agency responsible for the importation of live animals.11– Government or semi-government body responsible for port operations.12– Government body responsible for public health matters.13– Government agency responsible for transportation policy and other transportation matters.14– Government body responsible for the policing of the port.
-
9411 – Code indicating the requirement and status of governmental involvement.
Type: an, Max Length: 3Valid Codes:1– Instructions have been carried out.2– Procedures have been carried out as amended.3– Procedures have been completed.4– Instructions are not applicable.5– An action which is most desirable but not required.6– Procedures are required.7– Procedures are applicable.8– Indication by exporter that they need certificate of export from Customs.
-
9417 – Code specifying a type of government action such as inspection, detention, fumigation, security.
Type: an, Max Length: 3Valid Codes:1– The cargo will be or has been cleared.2– The cargo has been or will be detained.3– The cargo has been or will be fumigated.4– The cargo has been or will be inspected.5– The cargo has been or will be secured.6– The means of transport will be or has been admitted.7– The cargo hold has been or will be inspected.8– The container has been or will be inspected.9– The cargo packaging has been or will be inspected.10– Indication by exporter that they do not need certificate of export from Customs.
-
9353 – Code specifying a government procedure.
Type: an, Max Length: 3Valid Codes:1– Arrangements for inspection are not necessary because they were cleared before.2– All requirements for documents have been completed.3– Pertinent documents are required.4– Arrangements for inspection of the cargo have been completed.5– Arrangements for inspection of the cargo are required.6– Customs clearance not required.7– Arrangements for safeguarding the cargo have been completed.8– Arrangements for safeguarding the cargo are required.9– Arrangements for the security of the cargo are required.10– Arrangements for storing the cargo have been completed.11– Arrangements for storing the cargo are required.12– All arrangements for transport have been completed.13– Transport has to be arranged.
-
9415 – Code identifying a government agency.
-
8323 – Code specifying the transport movement.
Type: an, Max Length: 3Valid Codes:1– The transport movement is to export the goods from the country.2– The transport movement is to import the goods into the country.3– The cargo is moving in transit through a country and will not become part of the commerce of that country.4– The cargo is being moved by more than one transport means in succession under the responsibility of the same carrier.5– The cargo is being moved by more than one transport means in succession.
LOC To identify a place or a location and/or related locations. (Max 1)
Elements and codes as defined at LOC above.
Group SG4 (Max 9)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
-
C056 – Code and/or name of a contact such as a department or employee. Code preferred.
-
3413 – To identify a contact, such as a department or employee.
Type: an, Max Length: 17 -
3412 – Name of a contact, such as a department or employee.
Type: an, Max Length: 256
-
3413 – To identify a contact, such as a department or employee.
-
3139 – Code specifying the function of a contact (e.g. department or person).
Type: an, Max Length: 3Valid Codes:AA– Department/person to contact for matters regarding insurance.AB– Department/person to contact for matters regarding the workshop.AC– Department/person in charge of accepting incoming goods.AD– The contact responsible for accounting matters.AE– Department/person to contact for matters regarding contracts.AF– Department/person to contact for matters regarding land registry.AG– Department/person of the agent which acts on behalf of another party.AH– Department/person to contact for matters regarding technical coordination of works.AI– Department/person to contact for matters regarding project management on behalf of the contractor.AJ– Department/person to contact for matters regarding investments.AK– Department/person to contact for matters regarding management of works on behalf of the owner.AL– Department/person to contact for matters regarding personnel (human resources).AM– Department/person to contact for matters regarding claims.AN– Department/person to contact for laboratory matters.AO– Department/person to contact for matters regarding plant/equipment.AP– Department/person responsible for the accounts payable function within a corporation.AQ– Department/person to contact for matters regarding quantity surveying.AR– Department/person responsible for the accounts receivable within a corporation.AS– Department/person to contact for matters regarding public relations.AT– Department/person to contact for matters regarding technical issues.
Showing 20 of 99 values defined for element 3139 in D09B.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 9)
-
C076 – Communication number of a department or employee in a specified channel.
-
3148 – To identify a communication address.
Type: an, Max Length: 512 (Required) -
3155 – Code specifying the type of communication address.
Type: an, Max Length: 3 (Required)Valid Codes:AA– A process that, on demand, connects two or more data terminal equipments and permits the exclusive use of a data circuit between them until the connection is released (ISO).AB– Communications number assigned by Societe Internationale de Telecommunications Aeronautiques (SITA).AC– Communications number assigned by Aeronautical Radio Inc.AD– AT&T mailbox identifier.AE– Peripheral device identification.AF– The switched telecommunications network of the United States Department of Defense.AG– The switched telecommunications network of the United States government.AH– Data exchange via the World Wide Web.AI– Identifies that portion of an international telephone number representing the country code to be used when calling internationally.AJ– Identifies the alternate telephone number.AK– Code that identifies the communications number for the online videotex service.AL– Identifies the cellular phone number.AM– The international telephone direct line number.AN– ODETTE File Transfer Protocol.AO– Identification of the Uniform Resource Location (URL) Synonym: World wide web address.AP– VHF radio telephone.AQ– The X.400 address accepting information in the body text of a message.AR– Address capable of receiving messages in accordance with the EDIINT/AS1 protocol for MIME based EDI .AS– Address capable of receiving messages in accordance with the EDIINT/AS2 protocol.AT– Address capable of receiving messages in accordance with the EDIINT/AS3 protocol.
Showing 20 of 46 values defined for element 3155 in D09B.
-
3148 – To identify a communication address.
Group SG5 (Max 9)
STS To specify the status of an object or service, including its category and the reason(s) for the status. (Max 1) Required
-
C601 – To specify the category of the status.
-
9015 – Code specifying the category of a status.
Type: an, Max Length: 3 (Required)Valid Codes:1– Status type is related to transport.2– Status type is related to order administration.3– To specify the result of an inspection.4– The status reported is related to a publication issue claim.5– Status category is of, related to or concerned with the law.6– The status reported is related to a contract.7– The status reported is related to a transaction.8– The quality of a meter reading.9– The status reported is related to a capacity.10– The status is related to the categorization of measurement.11– A code describing the security status of a means of transport including security certification status of the transport means and status of maintained or required security procedures during transport operations.
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
9015 – Code specifying the category of a status.
-
C555 – To specify a status.
-
4405 – Code specifying a status.
Type: an, Max Length: 3 (Required)Valid Codes:1– Remark that the requested service in the order remains outstanding.2– The instruction has been completed.3– The information has been passed on.4– The amount has the status of finality.5– The amount is subject to finality.6– The amount quoted is a minimum tariff.7– The amount quoted is a fixed tariff.8– The amount quoted is a maximum tariff.9– The amount is quoted for information only, it is not part of the charges to be deducted or added.10– The amount is available today.11– The amount is available on the next banking office day after the booking date.12– The amount is available on the second banking office day after the booking date.13– The amount available on the third banking office day after the booking date.14– Funds not collected by beneficiary.15– The amount or quantity is zero.16– No status or condition has been advised.17– A status or condition has been requested.18– No charge is to be made.19– The quantity has been the subject of a rounding operation.20– Intended to last or function indefinitely.
Showing 20 of 145 values defined for element 4405 in D09B.
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
4404 – Free form description of a status.
Type: an, Max Length: 35
-
4405 – Code specifying a status.
-
C556 – To specify the reason for a status.
-
9013 – Code specifying the reason for a status.
Type: an, Max Length: 3 (Required)Valid Codes:1– The address for delivery is outside the area of the carrier/transporter.2– The goods/consignments/equipment arrived after the means of transport has departed.3– The agent of the customer refused to accept delivery.4– The seals on the equipment have been changed from those notified.5– An arrangement has been made to deliver at a specific time.6– An unsuccessful attempt has been made to deliver the goods/consignments/equipment.7– The goods/consignments/equipment could not be delivered/collected as the business was closed.8– The goods/consignments/equipment cannot/will not be delivered/collected at the arranged time because of a change of schedule.9– A further address is needed to effect delivery/collection of the goods/consignments/equipment.10– The computer system is inoperative.11– The consignee requests delivery on a credit base.12– Goods/consignments/equipment require delivery arrangements by the customer.13– The Customs authorities have refused to clear the goods/consignments/equipment.14– The goods/consignments/equipment have been damaged.15– Delivery of the goods/consignments/equipment is requested at specific dates/times/periods.16– The goods/consignments/equipment have been sent to wrong destination.17– The transport has been delayed in departing on the arranged transport action.18– The train carrying the goods/consignments/equipment has been derailed.19– There is a discrepancy between the details of goods/ equipment previously provided and the actual situation.20– The goods/consignments/equipment cannot be delivered/collected due to a dock strike.
Showing 20 of 106 values defined for element 9013 in D09B.
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
9012 – Free form description of the status reason.
Type: an, Max Length: 256
-
9013 – Code specifying the reason for a status.
-
C556 – To specify the reason for a status.
-
9013 – Code specifying the reason for a status.
Type: an, Max Length: 3 (Required)Valid Codes:1– The address for delivery is outside the area of the carrier/transporter.2– The goods/consignments/equipment arrived after the means of transport has departed.3– The agent of the customer refused to accept delivery.4– The seals on the equipment have been changed from those notified.5– An arrangement has been made to deliver at a specific time.6– An unsuccessful attempt has been made to deliver the goods/consignments/equipment.7– The goods/consignments/equipment could not be delivered/collected as the business was closed.8– The goods/consignments/equipment cannot/will not be delivered/collected at the arranged time because of a change of schedule.9– A further address is needed to effect delivery/collection of the goods/consignments/equipment.10– The computer system is inoperative.11– The consignee requests delivery on a credit base.12– Goods/consignments/equipment require delivery arrangements by the customer.13– The Customs authorities have refused to clear the goods/consignments/equipment.14– The goods/consignments/equipment have been damaged.15– Delivery of the goods/consignments/equipment is requested at specific dates/times/periods.16– The goods/consignments/equipment have been sent to wrong destination.17– The transport has been delayed in departing on the arranged transport action.18– The train carrying the goods/consignments/equipment has been derailed.19– There is a discrepancy between the details of goods/ equipment previously provided and the actual situation.20– The goods/consignments/equipment cannot be delivered/collected due to a dock strike.
Showing 20 of 106 values defined for element 9013 in D09B.
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
9012 – Free form description of the status reason.
Type: an, Max Length: 256
-
9013 – Code specifying the reason for a status.
-
C556 – To specify the reason for a status.
-
9013 – Code specifying the reason for a status.
Type: an, Max Length: 3 (Required)Valid Codes:1– The address for delivery is outside the area of the carrier/transporter.2– The goods/consignments/equipment arrived after the means of transport has departed.3– The agent of the customer refused to accept delivery.4– The seals on the equipment have been changed from those notified.5– An arrangement has been made to deliver at a specific time.6– An unsuccessful attempt has been made to deliver the goods/consignments/equipment.7– The goods/consignments/equipment could not be delivered/collected as the business was closed.8– The goods/consignments/equipment cannot/will not be delivered/collected at the arranged time because of a change of schedule.9– A further address is needed to effect delivery/collection of the goods/consignments/equipment.10– The computer system is inoperative.11– The consignee requests delivery on a credit base.12– Goods/consignments/equipment require delivery arrangements by the customer.13– The Customs authorities have refused to clear the goods/consignments/equipment.14– The goods/consignments/equipment have been damaged.15– Delivery of the goods/consignments/equipment is requested at specific dates/times/periods.16– The goods/consignments/equipment have been sent to wrong destination.17– The transport has been delayed in departing on the arranged transport action.18– The train carrying the goods/consignments/equipment has been derailed.19– There is a discrepancy between the details of goods/ equipment previously provided and the actual situation.20– The goods/consignments/equipment cannot be delivered/collected due to a dock strike.
Showing 20 of 106 values defined for element 9013 in D09B.
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
9012 – Free form description of the status reason.
Type: an, Max Length: 256
-
9013 – Code specifying the reason for a status.
-
C556 – To specify the reason for a status.
-
9013 – Code specifying the reason for a status.
Type: an, Max Length: 3 (Required)Valid Codes:1– The address for delivery is outside the area of the carrier/transporter.2– The goods/consignments/equipment arrived after the means of transport has departed.3– The agent of the customer refused to accept delivery.4– The seals on the equipment have been changed from those notified.5– An arrangement has been made to deliver at a specific time.6– An unsuccessful attempt has been made to deliver the goods/consignments/equipment.7– The goods/consignments/equipment could not be delivered/collected as the business was closed.8– The goods/consignments/equipment cannot/will not be delivered/collected at the arranged time because of a change of schedule.9– A further address is needed to effect delivery/collection of the goods/consignments/equipment.10– The computer system is inoperative.11– The consignee requests delivery on a credit base.12– Goods/consignments/equipment require delivery arrangements by the customer.13– The Customs authorities have refused to clear the goods/consignments/equipment.14– The goods/consignments/equipment have been damaged.15– Delivery of the goods/consignments/equipment is requested at specific dates/times/periods.16– The goods/consignments/equipment have been sent to wrong destination.17– The transport has been delayed in departing on the arranged transport action.18– The train carrying the goods/consignments/equipment has been derailed.19– There is a discrepancy between the details of goods/ equipment previously provided and the actual situation.20– The goods/consignments/equipment cannot be delivered/collected due to a dock strike.
Showing 20 of 106 values defined for element 9013 in D09B.
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
9012 – Free form description of the status reason.
Type: an, Max Length: 256
-
9013 – Code specifying the reason for a status.
-
C556 – To specify the reason for a status.
-
9013 – Code specifying the reason for a status.
Type: an, Max Length: 3 (Required)Valid Codes:1– The address for delivery is outside the area of the carrier/transporter.2– The goods/consignments/equipment arrived after the means of transport has departed.3– The agent of the customer refused to accept delivery.4– The seals on the equipment have been changed from those notified.5– An arrangement has been made to deliver at a specific time.6– An unsuccessful attempt has been made to deliver the goods/consignments/equipment.7– The goods/consignments/equipment could not be delivered/collected as the business was closed.8– The goods/consignments/equipment cannot/will not be delivered/collected at the arranged time because of a change of schedule.9– A further address is needed to effect delivery/collection of the goods/consignments/equipment.10– The computer system is inoperative.11– The consignee requests delivery on a credit base.12– Goods/consignments/equipment require delivery arrangements by the customer.13– The Customs authorities have refused to clear the goods/consignments/equipment.14– The goods/consignments/equipment have been damaged.15– Delivery of the goods/consignments/equipment is requested at specific dates/times/periods.16– The goods/consignments/equipment have been sent to wrong destination.17– The transport has been delayed in departing on the arranged transport action.18– The train carrying the goods/consignments/equipment has been derailed.19– There is a discrepancy between the details of goods/ equipment previously provided and the actual situation.20– The goods/consignments/equipment cannot be delivered/collected due to a dock strike.
Showing 20 of 106 values defined for element 9013 in D09B.
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
9012 – Free form description of the status reason.
Type: an, Max Length: 256
-
9013 – Code specifying the reason for a status.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG6 (Max 99)
ERP A segment to identify the location of an application error within a message. (Max 1) Required
-
C701 – Indication of the point of error in a message.
-
1049 – Code specifying a section of a message.
Type: an, Max Length: 3Valid Codes:1– The section of the message being referenced is the header.2– The section of the message being referenced is the detail.5– Multiple sections of the message are being referenced.6– The section of the message being referenced is the summary.7– The section of the message being referenced refers to the sub-line item.8– Group 7 to 14 of CUSDEC message.9– Group 15 to 22 of CUSDEC message.10– Group 23 to 33 of CUSDEC message.11– Group 34 and 35 of CUSDEC message.
-
1052 – To identify an item within a message.
Type: an, Max Length: 35
-
1049 – Code specifying a section of a message.
-
C853 – To indicate the exact segment location of an application error within a message.
-
9166 – To identify the tag of a segment.
Type: an, Max Length: 3 -
1050 – To identify a position in a sequence.
Type: an, Max Length: 10 -
1159 – Code specifying the source of a sequence identifier.
Type: an, Max Length: 3Valid Codes:1– Report from workstation 1.2– Report from workstation 2.3– The manufacturer's plant requesting the delivery of the item has allocated the sequence number.4– The plant requesting the delivery of an item assigns a number indicating the sequence of the finished article.5– The positional sequence when transmitted.6– The positional sequence in a message structure as published in a particular UN directory.
-
9166 – To identify the tag of a segment.
ELU To specify the usage of a data element. (Max 99)
-
9162 – To identify the tag of a data element.
Type: an, Max Length: 4 (Required) -
7299 – Code specifying the requirement designator.
Type: an, Max Length: 3Valid Codes:1– Object is conditional.2– Object is mandatory.3– Object is optional.4– Object is floating, not at a pre-defined position within a message.5– Object is not used.6– Object is required.7– Object use is advised.8– Object use is not advised.9– Object use is dependent upon an additional condition or criteria.10– Value to be used when no other value is specified.11– The value is preferred.
-
1050 – To identify a position in a sequence.
Type: an, Max Length: 10 -
4513 – Code specifying a maintenance operation.
Type: an, Max Length: 3Valid Codes:1– The data is to be processed as new.2– The data contains new objects, which are to be added, and existing objects, which are to replace objects which have the same identifier.3– The data is to replace existing data which has the same identifier.4– The data identified is to be deleted.5– The data is not to be maintained.6– Maintenance operation involves addition.7– Maintenance operation involves change.8– The item is marked for deletion in a future release.9– Maintenance operation involves repair.10– Maintenance operation involves cleaning.11– Maintenance operation involves waste disposal.12– Maintenance operation involves return of empty packages.
-
6176 – To specify the maximum number of occurrences.
Type: n, Max Length: 7 -
9453 – Code specifying the source of a code value.
Type: an, Max Length: 3Valid Codes:1– The code value is from an external code list.2– The code value is from the code list specified within the standard.3– The code value is taken from a non-published code list.
-
9285 – Code specifying the validation criteria to be applied.
Type: an, Max Length: 3Valid Codes:1– Any specified value is allowed.2– Any value from the standard is allowed.
-
9175 – Code specifying the usage type of a data element.
Type: an, Max Length: 3Valid Codes:1– The associated data element is used within a composite.2– The associated data element is used as a stand-alone element.3– The associated data element is a composite data element.
Group SG7 (Max 99)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
-
C082 – Identification of a transaction party by code.
-
3039 – Code specifying the identity of a party.
Type: an, Max Length: 35 (Required) -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
3039 – Code specifying the identity of a party.
-
C058 – Unstructured name and address: one to five lines.
-
3124 – Free form description of a name and address line.
Type: an, Max Length: 35 (Required) -
3124 – Free form description of a name and address line.
Type: an, Max Length: 35 -
3124 – Free form description of a name and address line.
Type: an, Max Length: 35 -
3124 – Free form description of a name and address line.
Type: an, Max Length: 35 -
3124 – Free form description of a name and address line.
Type: an, Max Length: 35
-
3124 – Free form description of a name and address line.
-
C080 – Identification of a transaction party by name, one to five lines. Party name may be formatted.
-
3036 – Name of a party.
Type: an, Max Length: 70 (Required) -
3036 – Name of a party.
Type: an, Max Length: 70 -
3036 – Name of a party.
Type: an, Max Length: 70 -
3036 – Name of a party.
Type: an, Max Length: 70 -
3036 – Name of a party.
Type: an, Max Length: 70 -
3045 – Code specifying the representation of a party name.
Type: an, Max Length: 3Valid Codes:1– Name component 1: Family name. Name component 2: Given name or initials. Name component 3: Given name or initials. Name component 4: Maiden name. Name component 5: Title Group of name components transmitted in sequence with name component 1 transmitted first. The maiden name is the family name given at birth of a female. Other names are self-explanatory.2– Name component 1: paternal name; name component 2: maternal name; name component 3: given name or initial(s); name component 4: middle name or initial(s); name component 5: name suffix.3– Name component 1: Qualification Name component 2: First part of the name Name component 3: Second part of the name.
-
3036 – Name of a party.
-
C059 – Street address and/or PO Box number in a structured address: one to four lines.
-
3042 – To identify a street and number and/or Post Office box number.
Type: an, Max Length: 35 (Required) -
3042 – To identify a street and number and/or Post Office box number.
Type: an, Max Length: 35 -
3042 – To identify a street and number and/or Post Office box number.
Type: an, Max Length: 35 -
3042 – To identify a street and number and/or Post Office box number.
Type: an, Max Length: 35
-
3042 – To identify a street and number and/or Post Office box number.
-
C819 – To specify a country subdivision, such as state, canton, county, prefecture.
-
3229 – To identify a country subdivision, such as state, canton, county, prefecture.
Type: an, Max Length: 9 -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
3228 – Name of a country subdivision, such as state, canton, county, prefecture.
Type: an, Max Length: 70
-
3229 – To identify a country subdivision, such as state, canton, county, prefecture.
-
3035 – Code giving specific meaning to a party.
Type: an, Max Length: 3 (Required)Valid Codes:AA– Party to be billed in accordance with AAR Accounting rule 11.AB– Third party who arranged the purchase of merchandise on behalf of the actual buyer.AE– Any natural or legal person who makes a declaration to an official body on behalf of another natural or legal person, where legally permitted (CCC).AF– Natural or legal person responsible for the satisfactory performance of a Customs transit operation. Source: CCC.AG– (3196) Party authorized to act on behalf of another party. Synonym: Representative.AH– Agent acting on behalf of the transit principal (CCC).AI– Person who has been chosen for a job.AJ– The party which has issued all mutually agreed codes used in the message.AK– Party to whom acknowledgement should be sent.AL– (3340) Party accepting liability for goods held or moving (e.g. transit) under a Customs authorization and - when applicable - a guarantee.AM– Employee of a company or firm authorized to act on behalf of that company or firm e.g. to make a Customs declaration.AN– Person or company which is authorised by the relevant Customs authority to import goods without payment all taxes or specific taxes at the point of entry into the country.AO– Party account is assigned to.AP– (3336) Party accepting goods, products, services, etc.AQ– Person or company approved by the relevant authority in the country to pack and export specific goods under Customs supervision.AR– Exporter authorized/approved by Customs for special Customs procedures e.g. simplified procedure.AS– Identifies the financial institution servicing the account(s).AT– Importer authorized/approved by Customs for special Customs procedures e.g. simplified procedure.AU– Trader authorized/approved by Customs for special transit procedures e.g. simplified procedure.AV– Party that has delegated the authority to take a certain action on behalf of a company or agency.
Showing 20 of 589 values defined for element 3035 in D09B.
-
3164 – Name of a city.
Type: an, Max Length: 35 -
3251 – Code specifying the postal zone or address.
Type: an, Max Length: 17 -
3207 – Identification of the name of the country or other geographical entity as defined in ISO 3166-1 and UN/ECE Recommendation 3.
Type: an, Max Length: 3
DTM To specify date, and/or time, or period. (Max 9)
Elements and codes as defined at DTM above.
GEI To identify processing information. (Max 1)
Elements and codes as defined at GEI above.
STS To specify the status of an object or service, including its category and the reason(s) for the status. (Max 1)
Elements and codes as defined at STS above.
IFD To specify details about items of information. (Max 9)
Elements and codes as defined at IFD above.
Group SG8 (Max 9)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 9)
Elements and codes as defined at COM above.
Group SG9 (Max 99)
DOC To identify documents and details directly related to it. (Max 1) Required
-
C002 – Identification of a type of document/message by code or name. Code preferred.
-
1001 – Code specifying the document name.
Type: an, Max Length: 3Valid Codes:1– Certificate providing the values of an analysis.2– Certificate certifying the conformity to predefined definitions.3– Certificate certifying the quality of goods, services etc.4– Report providing the results of a test session.5– Report specifying the performance values of products.6– Report providing specification values of products.7– Reports on events during production process.8– Document/message describes the test report of the first sample.9– A document/message to enable the transmission of information regarding pricing and catalogue details for goods and services offered by a seller to a buyer.10– Document/message providing basic data concerning a party.11– A pre-approved document relating to federal label approval requirements.12– Certificate certifying a specific quality of agricultural products.13– Document/message which evidences the transport of goods by post (e.g. mail, parcel, etc.).14– Certificate certifying the weight of goods.15– Document/message specifying the weight of goods.16– Document by means of which the documentary credit applicant specifies the conditions for the certificate and by whom the certificate is to be issued.17– Document identifying goods in which the issuing authority expressly certifies that the goods originate in a specific country or part of, or group of countries. It also states the price and/or cost of the goods with the purpose of determining the customs origin.18– Specific form of transit declaration issued by the exporter (movement certificate).19– Certificate certifying the quantity of goods, services etc.20– Usage of QALITY-message.
Showing 20 of 662 values defined for element 1001 in D09B.
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
1000 – Name of a document.
Type: an, Max Length: 35
-
1001 – Code specifying the document name.
-
C503 – Identification of document/message by number, status, source and/or language.
-
1004 – To identify a document.
Type: an, Max Length: 70 -
1373 – Code specifying the status of a document.
Type: an, Max Length: 3Valid Codes:1– The specified document is accepted.2– Notice that a specific document will be accompanying the goods.3– The specified document is conditionally accepted.4– Notice that a specific document/message will be transmitted via a separate EDI message.5– Notice that the specific document or message is for information only.6– Notice that a specific document or message will not be sent via EDI.7– Request for a specific message to be formatted and transmitted or a request for a specific document to be raised and sent.8– The specified document is rejected.9– The document or message is to be printed.10– Specific document is currently valid.11– Specified document is not available.12– Customs declaration to which the document is related completed or exhaust the allowance stated on the document. The document is attached to the Customs declaration.13– Customs declaration to which the document is related does not complete or exhaust the allowance stated on the document . The document is not attached to the declaration but has already been lodged in the Customs station.14– Customs declaration to which the document is related completed or exhaust the allowance stated on the document. The usage of the document is complete. The document is not attached to the declaration but has already been lodged in the Customs station.15– Customs declaration to which the document is related does not complete or exhaust the allowance stated on the document. The document can continue to be used for future declarations until the allowance is exhausted. The document is not attached to the declaration but has already been lodged in the Customs station.16– Specified document is not or cannot be attached.17– Document not attached to the Customs declaration but is attached to the goods.18– Specified document is attached to the Customs declaration and will be required to be returned to the declarant after Customs endorsement.19– Application has been submitted for that document.20– Indicates that the document has legal validity from the date of receival of the cargo.
Showing 20 of 37 values defined for element 1373 in D09B.
-
1366 – Free form description of the source of a document.
Type: an, Max Length: 70 -
3453 – Code specifying the language name.
Type: an, Max Length: 3 -
1056 – To identify a version.
Type: an, Max Length: 9 -
1060 – To identify a revision.
Type: an, Max Length: 6
-
1004 – To identify a document.
-
3153 – Code specifying the type of communication medium.
Type: an, Max Length: 3Valid Codes:AA– A process that, on demand, connects two or more data terminal equipments and permits the exclusive use of a data circuit between them until the connection is released (ISO).AB– Communications number assigned by Societe Internationale de Telecommunications Aeronautiques (SITA).AC– Communications number assigned by Aeronautical Radio Inc.AD– A communication channel identifying a courier.AE– Express (e.g. overnight) postal service document delivery.CA– The cable is used as communication medium.EI– Number identifying the service and service user.EM– Exchange of mail by electronic means.EX– Telephone extension.FT– According to ISO.FX– Device used for transmitting and reproducing fixed graphic material (as printing) by means of signals over telephone lines or other electronic transmission media.GM– GEIS mailbox system is used as communication medium.IE– IBM IE is used as communication medium.IM– Internal mail address/number.MA– Postal service document delivery.PB– Postbox system is used as communication medium.PS– The process of routing and transferring data by means of addressed packets so that a channel is occupied only during the transmission; upon completion of the transmission the channel is made available for the transfer of other packets (ISO).SW– Communications address assigned by Society for Worldwide Interbank Financial Telecommunications s.c.TE– Voice/data transmission by telephone.TG– Text transmission via telegraph.
Showing 20 of 25 values defined for element 3153 in D09B.
-
1220 – Quantity of document copies required.
Type: n, Max Length: 2 -
1218 – Quantity of document originals required.
Type: n, Max Length: 2
RFF To specify a reference. (Max 9)
Elements and codes as defined at RFF above.
DTM To specify date, and/or time, or period. (Max 9)
Elements and codes as defined at DTM above.
MOA To specify a monetary amount. (Max 9)
Elements and codes as defined at MOA above.
ALI To indicate that special conditions due to the origin, customs preference, fiscal or commercial factors are applicable. (Max 1)
-
3239 – To identify the country in which the goods have been produced or manufactured, according to criteria laid down for the application of the Customs tariff or quantitative restrictions, or any measure related to trade.
Type: an, Max Length: 3 -
9213 – Code specifying a type of duty regime.
Type: an, Max Length: 3Valid Codes:1– Origin of the product is subject to EC/EFTA (European Commission European Free Trade Association).2– Origin of the product is subject to other preference agreement.3– Origin of the product is not subject to any preference.8– Origin of the product is excluded.9– Origin of the product is imposed.
-
4183 – Code specifying a special condition.
Type: an, Max Length: 3Valid Codes:1– Item concerned is applicable to national preference calculation.2– Item concerned is applicable for settlement/payment discount calculation.3– Item concerned is not applicable for settlement/payment discount calculation.4– Urgent delivery of goods for which a reservation was made.5– Item concerned is not applicable for bonus calculation.6– Item concerned is applicable for bonus calculation.7– Item concerned is applicable for commission calculation.8– Item concerned is applicable for discount calculation.9– Item should be available freely within the European Economic Community.10– Item concerned is applicable for the overall settlement discount.11– The stated price is inclusive of excise.12– The stated price is inclusive of tax.13– The stated price is inclusive of duty.14– Item concerned is not applicable for commission calculation.15– Item concerned is not applicable for discount calculation.16– Item concerned is subject to embargo restriction.17– Item concerned is not subject to embargo restriction.18– Item concerned requires export declaration.19– Item concerned does not require export declaration.20– Item concerned is liable to import restrictions defined by relevant national authority.
Showing 20 of 207 values defined for element 4183 in D09B.
-
4183 – Code specifying a special condition.
Type: an, Max Length: 3Valid Codes:1– Item concerned is applicable to national preference calculation.2– Item concerned is applicable for settlement/payment discount calculation.3– Item concerned is not applicable for settlement/payment discount calculation.4– Urgent delivery of goods for which a reservation was made.5– Item concerned is not applicable for bonus calculation.6– Item concerned is applicable for bonus calculation.7– Item concerned is applicable for commission calculation.8– Item concerned is applicable for discount calculation.9– Item should be available freely within the European Economic Community.10– Item concerned is applicable for the overall settlement discount.11– The stated price is inclusive of excise.12– The stated price is inclusive of tax.13– The stated price is inclusive of duty.14– Item concerned is not applicable for commission calculation.15– Item concerned is not applicable for discount calculation.16– Item concerned is subject to embargo restriction.17– Item concerned is not subject to embargo restriction.18– Item concerned requires export declaration.19– Item concerned does not require export declaration.20– Item concerned is liable to import restrictions defined by relevant national authority.
Showing 20 of 207 values defined for element 4183 in D09B.
-
4183 – Code specifying a special condition.
Type: an, Max Length: 3Valid Codes:1– Item concerned is applicable to national preference calculation.2– Item concerned is applicable for settlement/payment discount calculation.3– Item concerned is not applicable for settlement/payment discount calculation.4– Urgent delivery of goods for which a reservation was made.5– Item concerned is not applicable for bonus calculation.6– Item concerned is applicable for bonus calculation.7– Item concerned is applicable for commission calculation.8– Item concerned is applicable for discount calculation.9– Item should be available freely within the European Economic Community.10– Item concerned is applicable for the overall settlement discount.11– The stated price is inclusive of excise.12– The stated price is inclusive of tax.13– The stated price is inclusive of duty.14– Item concerned is not applicable for commission calculation.15– Item concerned is not applicable for discount calculation.16– Item concerned is subject to embargo restriction.17– Item concerned is not subject to embargo restriction.18– Item concerned requires export declaration.19– Item concerned does not require export declaration.20– Item concerned is liable to import restrictions defined by relevant national authority.
Showing 20 of 207 values defined for element 4183 in D09B.
-
4183 – Code specifying a special condition.
Type: an, Max Length: 3Valid Codes:1– Item concerned is applicable to national preference calculation.2– Item concerned is applicable for settlement/payment discount calculation.3– Item concerned is not applicable for settlement/payment discount calculation.4– Urgent delivery of goods for which a reservation was made.5– Item concerned is not applicable for bonus calculation.6– Item concerned is applicable for bonus calculation.7– Item concerned is applicable for commission calculation.8– Item concerned is applicable for discount calculation.9– Item should be available freely within the European Economic Community.10– Item concerned is applicable for the overall settlement discount.11– The stated price is inclusive of excise.12– The stated price is inclusive of tax.13– The stated price is inclusive of duty.14– Item concerned is not applicable for commission calculation.15– Item concerned is not applicable for discount calculation.16– Item concerned is subject to embargo restriction.17– Item concerned is not subject to embargo restriction.18– Item concerned requires export declaration.19– Item concerned does not require export declaration.20– Item concerned is liable to import restrictions defined by relevant national authority.
Showing 20 of 207 values defined for element 4183 in D09B.
-
4183 – Code specifying a special condition.
Type: an, Max Length: 3Valid Codes:1– Item concerned is applicable to national preference calculation.2– Item concerned is applicable for settlement/payment discount calculation.3– Item concerned is not applicable for settlement/payment discount calculation.4– Urgent delivery of goods for which a reservation was made.5– Item concerned is not applicable for bonus calculation.6– Item concerned is applicable for bonus calculation.7– Item concerned is applicable for commission calculation.8– Item concerned is applicable for discount calculation.9– Item should be available freely within the European Economic Community.10– Item concerned is applicable for the overall settlement discount.11– The stated price is inclusive of excise.12– The stated price is inclusive of tax.13– The stated price is inclusive of duty.14– Item concerned is not applicable for commission calculation.15– Item concerned is not applicable for discount calculation.16– Item concerned is subject to embargo restriction.17– Item concerned is not subject to embargo restriction.18– Item concerned requires export declaration.19– Item concerned does not require export declaration.20– Item concerned is liable to import restrictions defined by relevant national authority.
Showing 20 of 207 values defined for element 4183 in D09B.
QTY To specify a pertinent quantity. (Max 99)
-
C186 – Quantity information in a transaction, qualified when relevant.
-
6063 – Code qualifying the type of quantity.
Type: an, Max Length: 3 (Required)Valid Codes:1– Individually separated and distinct quantity.2– Quantity relevant for charge.3– Quantity accumulated.4– Interest for overdrawing the account.5– The dosage of active ingredient per unit.6– The number of entities that audit accounts.7– The number of branch locations being leased by an entity.8– Quantity of goods which the customer requires the supplier to have in inventory and which may be inspected by the customer if desired.9– The number of branch locations owned by an entity.10– The number of judgements registered against an entity.11– Part of the whole quantity.12– Quantity despatched by the seller.13– The number of liens registered against an entity.14– The number of animals kept for use or profit.15– The number of cheques returned due to insufficient funds.16– The number of stolen cheques.17– The total quantity of a product on hand at a location. This includes as well units awaiting return to manufacturer, units unavailable due to inspection procedures and undamaged stock available for despatch, resale or use.18– Quantity previously referenced.19– The number of security shares issued and for which full payment has been made.20– Quantity not usable.
Showing 20 of 490 values defined for element 6063 in D09B.
-
6060 – Alphanumeric representation of a quantity.
Type: an, Max Length: 35 (Required) -
6411 – Code specifying the unit of measurement.
Type: an, Max Length: 8
-
6063 – Code qualifying the type of quantity.
TSR To specify the contract and carriage conditions and service and priority requirements for the transport. (Max 99)
-
C536 – To identify a contract and carriage condition.
-
4065 – Code to identify the conditions of contract and carriage.
Type: an, Max Length: 3 (Required)Valid Codes:1– General conditions of transport 1983, latest revision laid down by the Stichting Vervoeradres The Hague.2– Appliance of a non published special agreement signed between a customer and the carrier (mandatory requested by the consignor) for parcels transport.3– Appliance of a non published special agreement signed between a customer and the carrier (mandatory requested by the consignor) for full load transport.4– A transport which involves more than one mode of transportation.5– Standard conditions of a combined transport bill of lading issued by FIATA.6– The contract and carriage conditions as established by freight forwarders on a national basis.7– Appliance of the published legal tariff in case of parcels transport (required or not by the consignor.8– Appliance of the published legal tariff in case of full load transport (required or not by the consignor).9– Carrier will choose the cheapest tariff in the legally published tariffs for parcels or full load transports (no tariff required by the consignor).10– The transport will only be port to port, no inland transport would have to be provided under the contract.11– Conditions in accordance with the convention of the contract for the international carriage of goods by road.12– Appliance of the legally published "special" tariff in case or parcels transport (tariff requested by the consignor).13– Appliance of the legally published "special tariff" in case of full load transport (tariff requested by the consignor).14– The transport that is contracted not only from port to port, but from one inland location to another inland location.15– Indication that space previously allocated on a flight is to be cancelled.16– Indication that a sale has been made against a space allocation on a specific flight.17– Indication that space is being requested for a specific flight and that an alternative is acceptable.18– Indication that space is being requested for a specific flight and that an alternative is not acceptable.19– Indication that space is being sold against a space allocation allotment on a specific flight.20– Indication that space requested has been confirmed on a specific flight.
Showing 20 of 39 values defined for element 4065 in D09B.
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
4065 – Code to identify the conditions of contract and carriage.
-
C233 – To identify a service (which may constitute an additional component to a basic contract).
-
7273 – Code specifying a service requirement.
Type: an, Max Length: 3 (Required)Valid Codes:1– The cargo is loaded in the equipment by the carrier.2– Container to be stuffed or stripped under responsibility and for account of the shipper or the consignee.3– Container to be stuffed and stripped for account and risk of the carrier.4– The cargo is loaded in the equipment by the shipper.5– The cargo is to be delivered as instructed.6– The cargo is to be retained awaiting further instructions.7– Transhipment of goods is allowed.8– Transhipment of goods is not allowed.9– Partial shipment is allowed.10– Partial shipment is not allowed.11– Partial shipment and/or drawing is allowed.12– Partial shipment and/or drawing is not allowed.13– The cargo is to be unloaded from the equipment by the carrier.14– The cargo is to be unloaded from the equipment by the shipper.15– The cargo is to be unloaded from the equipment by the consignee.16– The cargo is to be loaded in the equipment by the consignee.17– Usage of the equipment is reserved for exclusive use.18– Usage of the equipment is not reserved for exclusive use.19– Consignment for direct delivery to the consignee.20– Consignment for direct pick-up from the consignee.
Showing 20 of 64 values defined for element 7273 in D09B.
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
7273 – Code specifying a service requirement.
Type: an, Max Length: 3Valid Codes:1– The cargo is loaded in the equipment by the carrier.2– Container to be stuffed or stripped under responsibility and for account of the shipper or the consignee.3– Container to be stuffed and stripped for account and risk of the carrier.4– The cargo is loaded in the equipment by the shipper.5– The cargo is to be delivered as instructed.6– The cargo is to be retained awaiting further instructions.7– Transhipment of goods is allowed.8– Transhipment of goods is not allowed.9– Partial shipment is allowed.10– Partial shipment is not allowed.11– Partial shipment and/or drawing is allowed.12– Partial shipment and/or drawing is not allowed.13– The cargo is to be unloaded from the equipment by the carrier.14– The cargo is to be unloaded from the equipment by the shipper.15– The cargo is to be unloaded from the equipment by the consignee.16– The cargo is to be loaded in the equipment by the consignee.17– Usage of the equipment is reserved for exclusive use.18– Usage of the equipment is not reserved for exclusive use.19– Consignment for direct delivery to the consignee.20– Consignment for direct pick-up from the consignee.
Showing 20 of 64 values defined for element 7273 in D09B.
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
7273 – Code specifying a service requirement.
-
C537 – To indicate the priority of requested transport service.
-
4219 – Code specifying the priority of a transport service.
Type: an, Max Length: 3 (Required)Valid Codes:1– Express treatment (if by rail, legal express regime for parcels transport).2– Transport under legal international rail convention (CIM) concluded between rail organizations and based on fast routing and specified timetables.3– Transport under legal international rail convention (CIM) concluded between rail organizations.4– Transport under conditions specified by UPU (Universal Postal Union) and Rail organizations (parcels transport only).
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
4219 – Code specifying the priority of a transport service.
-
C703 – Rough classification of a type of cargo.
-
7085 – Code specifying the classification of a type of cargo.
Type: an, Max Length: 3 (Required)Valid Codes:1– Printed, typed or written matter including leaflets, pamphlets, certificates etc., which are not subject to import duties and taxes, restrictions and prohibitions.2– Imported consignments/items/goods in respect of which Customs duties and other taxes are waived as they are below a value determined by the Customs administration.3– Imported consignments/items/goods in respect of which Customs duties and other taxes are payable are below a certain amount as determined by the Customs administration.4– Imported consignments/items/goods which are determined as having a value above a certain amount fixed by the Customs administration, which may or may not attract duties and taxes.5– Non-containerized cargo which cannot be categorized by any of the other nature of cargo code.6– Vehicles which are not stowed in containers.7– Cargo transported or to be transported on roll-on roll- off vessels and which is transportable on its own wheels or stowed on special heavy duty trailers.8– Non-containerized cargo which is palletized.9– Cargo stowed or to be stowed in a container.10– Non-containerized cargo stowed in vessels' holds.11– Cargo with dangerous properties, according to appropriate dangerous goods regulations.12– Cargo of a general nature, not otherwise specified.13– Cargo in liquid form.14– Cargo transported under specified temperature conditions.15– Cargo is an environmental pollutant.16– Cargo which is not hazardous.17– Cargo transported under diplomatic conditions.18– Cargo for military purposes.19– Cargo that is objectionable to human senses.20– Cargo that has at least one non-standard dimension.
Showing 20 of 23 values defined for element 7085 in D09B.
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
7085 – Code specifying the classification of a type of cargo.
Group SG10 (Max 99)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
Group SG11 (Max 9)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 9)
Elements and codes as defined at COM above.
Group SG13 (Max 99)
RCS To specify sector/subject requirements and conditions. (Max 1) Required
-
C550 – To identify the specific rule/condition requirement.
-
7295 – Code specifying a requirement or condition.
Type: an, Max Length: 17 (Required)Valid Codes:1– The service was determined by the service provider.2– All X-rays specifically requested.3– Not for comparison.4– The service on contiguous body area that required different set-up.5– The service was conducted on non-contiguous body areas.6– Three hours or more between the services.7– Service was conducted on the left part of the body.8– The referral has been lost.9– Treatment was necessary as it was an emergency and/or immediately required.10– Second visit in one day.11– The procedure is separate.12– Post treatment medical care which differs from the usual post treatment medical care.13– Service was conducted on the right part of the body.
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
7294 – Free form description of a requirement or condition.
Type: an, Max Length: 35
-
7295 – Code specifying a requirement or condition.
-
7293 – Code qualifying identification of a subject area.
Type: an, Max Length: 3 (Required)Valid Codes:1– The specified conditions apply within the construction industry.2– The specified conditions apply within the government export sector.3– The specified conditions apply within the chemical industry.4– The specified conditions apply within the electronics industry.5– The specified conditions apply within the automotive industry.6– The specified conditions apply within the steel industry.7– Factoring industry.8– A code to identify the defence industry.9– Alcohol beverage industry.10– Applies to police formalities.11– Applies to customs regulations.12– Applies to health regulation.13– Balance of payments.14– National regulations specified by the relevant government.15– To identify requirements and conditions applicable to government activity.16– Subject refers to standards implementation.17– The information is related to insurance.18– Applies to credit inquiry.19– Applies to a general request.20– Applies to payment terms.
Showing 20 of 30 values defined for element 7293 in D09B.
-
1229 – Code specifying the action to be taken or already taken.
Type: an, Max Length: 3Valid Codes:1– The information is to be or has been added.2– The information is to be or has been deleted.3– The information is to be or has been changed.4– This line item is not affected by the actual message.5– This line item is entirely accepted by the seller.6– This line item is accepted but amended by the seller.7– This line item is not accepted by the seller.8– Code specifying that the message is a schedule only.9– Code specifying that amendments are requested/notified.10– This line item is not found in the referenced message.11– This line is not amended by the buyer.12– Code specifying that the line item numbers have changed.13– Buyer has deducted amount from payment.14– Buyer has a claim against an outstanding invoice.15– Factor has been requested to charge back the outstanding item.16– Seller agrees to issue a credit note.17– New settlement terms have been agreed.18– Factor agrees to abide by the outcome of negotiations between seller and buyer.19– Seller does not accept validity of dispute.20– The reported situation is settled.
Showing 20 of 115 values defined for element 1229 in D09B.
-
3207 – Identification of the name of the country or other geographical entity as defined in ISO 3166-1 and UN/ECE Recommendation 3.
Type: an, Max Length: 3
FTX To provide free form or coded text information. (Max 9)
-
C107 – Coded reference to a standard text and its source.
-
4441 – Code specifying free form text.
Type: an, Max Length: 17 (Required) -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
4441 – Code specifying free form text.
-
C108 – Free text; one to five lines.
-
4440 – Free form text.
Type: an, Max Length: 512 (Required) -
4440 – Free form text.
Type: an, Max Length: 512 -
4440 – Free form text.
Type: an, Max Length: 512 -
4440 – Free form text.
Type: an, Max Length: 512 -
4440 – Free form text.
Type: an, Max Length: 512
-
4440 – Free form text.
-
4451 – Code qualifying the subject of the text.
Type: an, Max Length: 3 (Required)Valid Codes:AAA– [7002] Plain language description of the nature of a goods item sufficient to identify it for customs, statistical or transport purposes.AAB– [4276] Free form description of the conditions of payment between the parties to a transaction.AAC– [7488] Additional information concerning dangerous substances and/or article in a consignment.AAD– [7254] Proper shipping name, supplemented as necessary with the correct technical name, by which a dangerous substance or article may be correctly identified, or which is sufficiently informative to permit identification by reference to generally available literature.AAE– The content of an acknowledgement.AAF– Specific details applying to rates.AAG– Indicates that the segment contains instructions to be passed on to the identified party.AAI– The text contains general information.AAJ– Additional conditions specific to this order or project.AAK– Information on the price conditions that are expected or given.AAL– Expression of a number in characters as length of ten meters.AAM– Technical or commercial reasons why a piece of equipment may not be re-used after the current transport terminates.AAN– Restrictions in handling depending on the technical characteristics of the piece of equipment or on the nature of the goods.AAO– Error described by a free text.AAP– Free text of the response to a communication.AAQ– A description of the contents of a package.AAR– (4053) Free text of the non Incoterms terms of delivery. For Incoterms, use: 4053.AAS– The remarks printed or to be printed on a bill of lading.AAT– Free text information on an IATA Air Waybill to indicate means by which account is to be settled.AAU– Information pertaining to the invoice covering the consignment.
Showing 20 of 365 values defined for element 4451 in D09B.
-
4453 – Code specifying the function of free text.
Type: an, Max Length: 3Valid Codes:1– The occurrence of this text does not affect message processing.2– Text description of a coded data item for which there is no currently available code.3– Text must be read before actioning message.4– Pass text on to later recipient.5– Indicates that the text is to be taken as a header.6– Indicates that the text starts a new numbered paragraph.7– Indicates that the text is a paragraph.
-
3453 – Code specifying the language name.
Type: an, Max Length: 3 -
4447 – Code specifying the format of free text.
Type: an, Max Length: 3Valid Codes:1– The associated text is centred in the available space.2– The associated text item is aligned flush left in the available space.3– The associated text is aligned flush right in the available space.4– The associated text is justified in the available space.5– The text is to be preceded by one blank line.6– The text is to be preceded by two blank lines.7– The text is to be preceded by three blank lines.8– The text is a continuation of preceding text.9– The text is to begin on a new page.10– The text is the final section of the preceding text.11– The text is to begin a new line.
DTM To specify date, and/or time, or period. (Max 9)
Elements and codes as defined at DTM above.
GEI To identify processing information. (Max 1)
Elements and codes as defined at GEI above.
ALI To indicate that special conditions due to the origin, customs preference, fiscal or commercial factors are applicable. (Max 9)
Elements and codes as defined at ALI above.
Group SG15 (Max 99)
AJT To identify the reason for an adjustment. (Max 1) Required
-
4465 – Code specifying the adjustment reason.
Type: an, Max Length: 3 (Required)Valid Codes:1– An adjustment made based on an agreement between partners.2– Goods of inferior quality.3– An adjustment due to the damage of goods.4– An adjustment made because the delivered quantity was less than expected.5– An adjustment due to a price query.6– The buyer requires that proof of delivery be made before payment.7– Buyer is to make payment later.8– Adjustment made to deduct the returnable container charge.9– Invoice not in accordance with the order.10– Cost of draft has been deducted from payment.11– Bank charges have been deducted from payment.12– Agent commission has been deducted from payment.13– Buyer claims an existing (financial) obligation from seller which (partly) offsets the outstanding invoice(s).14– Delivery not according to specifications.15– Goods returned to agent.16– Goods partly returned.17– Goods damaged in transit.18– Buyer does not accept invoice(s) charge as it relates to goods where the ownership remains with the seller until sold.19– Trade discount deducted from payment.20– Penalty amount deducted for later delivery.
Showing 20 of 98 values defined for element 4465 in D09B.
-
1082 – To identify a line item.
Type: an, Max Length: 6
Group SG17 (Max 99)
ERC To identify the type of application error within a message. (Max 1) Required
-
C901 – Code assigned by the recipient of a message to indicate a data validation error condition.
-
9321 – Code specifying an application error.
Type: an, Max Length: 8 (Required) -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
9321 – Code specifying an application error.
Group SG19 (Max 1)
INP To specify parties to an instruction, the instruction, or both. (Max 1) Required
-
C849 – Identify the sending and receiving parties of the instruction.
-
3301 – To identify the party enacting an instruction.
Type: an, Max Length: 35 (Required)Valid Codes:1– The financial institution which is requested to issue the documentary credit.2– The financial institution which issues the documentary credit, if the applicant's bank is not acting as the issuing bank.3– The financial institution with which the beneficiary maintains an account.4– The buyer is responsible for carrying out the instruction.5– The seller is responsible for carrying out the instruction.6– Identifies the financial institution through which the advising bank is to advise the documentary credit.7– Identifies the financial institution used by the issuing bank to advise the documentary credit.8– Identifies the bank from whom payment is due.9– The financial institution with which the ordering party maintains an account.
-
3285 – Code specifying the party to receive an instruction.
Type: an, Max Length: 35Valid Codes:1– The financial institution which is requested to issue the documentary credit.2– The financial institution which issues the documentary credit, if the applicant's bank is not acting as the issuing bank.3– The financial institution with which the beneficiary maintain an account.4– The party in whose favour the documentary credit is to be issued and the party who must comply with the credit's terms and conditions.5– First party to contact.6– Second party to contact.7– Third party to contact.8– Fourth party to contact.9– First financial institution to contact.10– Second financial institution to contact.11– Party to whom payment is due.12– Identifies the bank which is to receive funds.13– Identifies the bank to whom payment is due.14– Code specifying the party to receive an instruction.15– Party from whom payment is due.16– Party or party's agent from whom funds will be made available.
-
3301 – To identify the party enacting an instruction.
-
C522 – To specify an instruction.
-
4403 – Code qualifying the type of instruction.
Type: an, Max Length: 3 (Required)Valid Codes:1– Instruction requires action.2– The instructions are to be executed by means of a party.3– Instruction how to act if maximum value will be or has been exceeded.4– Documentary credit confirmation instructions.5– Documentary credit confirmation of issuance.6– Documentary credit pre-advice instructions.7– Delivery instructions for documents required under a documentary credit.8– Additional terms and/or conditions to the documentary credit.9– Instruction refers to an investment.10– Instructions as to how the reimbursement is to be effected.11– Instructions to the paying and/or accepting and/or negotiating bank.12– Instructions and/or information to the applicant.13– Case of need party power instructions.14– Payment of the documentary credit in local currency instructions.15– Return of acceptance draft instructions.16– Advice of non-payment method.17– Advice of non-acceptance method of the documentary credit.18– Advice of payment method of the documentary credit.19– Advice of acceptance method of the documentary credit.20– Instructions for the first transmission of documents.
Showing 20 of 33 values defined for element 4403 in D09B.
-
4401 – Code specifying an instruction.
Type: an, Max Length: 3Valid Codes:AA– Send a credit note.AB– Send invoice, taking into account specified discrepancies.AC– Instruction to advise party by airmail.AD– Instruction to advise a party.AE– Read the meter when the supply period starts.AF– Instruction to cease delivery.AG– The identified item must be sent for replacement.AH– The identified item is to be picked up.AI– Advise of documentary credit by telecommunication.AJ– Instruction to advise party by fax.AK– Issue documentary credit by registered airmail.AL– Deliver documents in one set by registered airmail.AM– Deliver documents in two sets by registered airmail.AN– The receiver is authorized to debit the account of the sender when due.AO– The receiver is authorized to reimburse themselves on the reimbursing bank when due.AP– Instruction to advise party by phone.AQ– Upon receipt and verification of documents we shall credit your account with us when due.AR– Protest is to be made in case of non-payment.AS– Protest is to be made in case of non-acceptance.AT– Instruction to advise party by telex.
Showing 20 of 98 values defined for element 4401 in D09B.
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
4400 – Free form description of an instruction.
Type: an, Max Length: 35
-
4403 – Code qualifying the type of instruction.
-
C850 – Provides information regarding the status of an instruction.
-
4405 – Code specifying a status.
Type: an, Max Length: 3 (Required)Valid Codes:1– Remark that the requested service in the order remains outstanding.2– The instruction has been completed.3– The information has been passed on.4– The amount has the status of finality.5– The amount is subject to finality.6– The amount quoted is a minimum tariff.7– The amount quoted is a fixed tariff.8– The amount quoted is a maximum tariff.9– The amount is quoted for information only, it is not part of the charges to be deducted or added.10– The amount is available today.11– The amount is available on the next banking office day after the booking date.12– The amount is available on the second banking office day after the booking date.13– The amount available on the third banking office day after the booking date.14– Funds not collected by beneficiary.15– The amount or quantity is zero.16– No status or condition has been advised.17– A status or condition has been requested.18– No charge is to be made.19– The quantity has been the subject of a rounding operation.20– Intended to last or function indefinitely.
Showing 20 of 145 values defined for element 4405 in D09B.
-
3036 – Name of a party.
Type: an, Max Length: 70
-
4405 – Code specifying a status.
-
1229 – Code specifying the action to be taken or already taken.
Type: an, Max Length: 3Valid Codes:1– The information is to be or has been added.2– The information is to be or has been deleted.3– The information is to be or has been changed.4– This line item is not affected by the actual message.5– This line item is entirely accepted by the seller.6– This line item is accepted but amended by the seller.7– This line item is not accepted by the seller.8– Code specifying that the message is a schedule only.9– Code specifying that amendments are requested/notified.10– This line item is not found in the referenced message.11– This line is not amended by the buyer.12– Code specifying that the line item numbers have changed.13– Buyer has deducted amount from payment.14– Buyer has a claim against an outstanding invoice.15– Factor has been requested to charge back the outstanding item.16– Seller agrees to issue a credit note.17– New settlement terms have been agreed.18– Factor agrees to abide by the outcome of negotiations between seller and buyer.19– Seller does not accept validity of dispute.20– The reported situation is settled.
Showing 20 of 115 values defined for element 1229 in D09B.
DTM To specify date, and/or time, or period. (Max 9)
Elements and codes as defined at DTM above.
LOC To identify a place or a location and/or related locations. (Max 9)
Elements and codes as defined at LOC above.
Group SG20 (Max 1)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
DTM To specify date, and/or time, or period. (Max 9)
Elements and codes as defined at DTM above.
Group SG21 (Max 9)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 9)
Elements and codes as defined at COM above.
Group SG22 (Max 9)
GIR To specify a related set of identification numbers. (Max 1) Required
-
C206 – The identification of an object.
-
7402 – Code specifying the unique identity of an object.
Type: an, Max Length: 35 (Required) -
7405 – Code qualifying the identification of an object.
Type: an, Max Length: 3Valid Codes:AA– A number that is used to identify goods from a freight forwarder/consolidator.AB– The first element in a series of elements that together define the structure of an object.AC– The second element in a series of elements that together define the structure of an object.AD– The third element in a series of elements that together define the structure of an object.AE– The fourth element in a series of elements that together define the structure of an object.AF– The fifth element in a series of elements that together define the structure of an object.AG– The sixth element in a series of elements that together define the structure of an object.AH– The seventh element in a series of elements that together define the structure of an object.AI– The eighth element in a series of elements that together define the structure of an object.AJ– The ninth element in a series of elements that together define the structure of an object.AK– The identity of a data set.AL– [1420] Reference number to identify a kanban card.AM– Level number in a hierarchy or other structure.AN– A unique number identifying a particular assembly or other manufacturing process.AO– A number to identify the position within a package according to agreed rules between partners.AP– A name or number which identifies a product.AQ– Number assigned to a release.AR– Statistical concept.AS– A table of items e.g. figures and text represented in rows and columns.AT– Number identifying a group of articles in a predescribed unit load for shipment/dispatch as agreed between partners.
Showing 20 of 93 values defined for element 7405 in D09B.
-
4405 – Code specifying a status.
Type: an, Max Length: 3Valid Codes:1– Remark that the requested service in the order remains outstanding.2– The instruction has been completed.3– The information has been passed on.4– The amount has the status of finality.5– The amount is subject to finality.6– The amount quoted is a minimum tariff.7– The amount quoted is a fixed tariff.8– The amount quoted is a maximum tariff.9– The amount is quoted for information only, it is not part of the charges to be deducted or added.10– The amount is available today.11– The amount is available on the next banking office day after the booking date.12– The amount is available on the second banking office day after the booking date.13– The amount available on the third banking office day after the booking date.14– Funds not collected by beneficiary.15– The amount or quantity is zero.16– No status or condition has been advised.17– A status or condition has been requested.18– No charge is to be made.19– The quantity has been the subject of a rounding operation.20– Intended to last or function indefinitely.
Showing 20 of 145 values defined for element 4405 in D09B.
-
7402 – Code specifying the unique identity of an object.
-
C206 – The identification of an object.
-
7402 – Code specifying the unique identity of an object.
Type: an, Max Length: 35 (Required) -
7405 – Code qualifying the identification of an object.
Type: an, Max Length: 3Valid Codes:AA– A number that is used to identify goods from a freight forwarder/consolidator.AB– The first element in a series of elements that together define the structure of an object.AC– The second element in a series of elements that together define the structure of an object.AD– The third element in a series of elements that together define the structure of an object.AE– The fourth element in a series of elements that together define the structure of an object.AF– The fifth element in a series of elements that together define the structure of an object.AG– The sixth element in a series of elements that together define the structure of an object.AH– The seventh element in a series of elements that together define the structure of an object.AI– The eighth element in a series of elements that together define the structure of an object.AJ– The ninth element in a series of elements that together define the structure of an object.AK– The identity of a data set.AL– [1420] Reference number to identify a kanban card.AM– Level number in a hierarchy or other structure.AN– A unique number identifying a particular assembly or other manufacturing process.AO– A number to identify the position within a package according to agreed rules between partners.AP– A name or number which identifies a product.AQ– Number assigned to a release.AR– Statistical concept.AS– A table of items e.g. figures and text represented in rows and columns.AT– Number identifying a group of articles in a predescribed unit load for shipment/dispatch as agreed between partners.
Showing 20 of 93 values defined for element 7405 in D09B.
-
4405 – Code specifying a status.
Type: an, Max Length: 3Valid Codes:1– Remark that the requested service in the order remains outstanding.2– The instruction has been completed.3– The information has been passed on.4– The amount has the status of finality.5– The amount is subject to finality.6– The amount quoted is a minimum tariff.7– The amount quoted is a fixed tariff.8– The amount quoted is a maximum tariff.9– The amount is quoted for information only, it is not part of the charges to be deducted or added.10– The amount is available today.11– The amount is available on the next banking office day after the booking date.12– The amount is available on the second banking office day after the booking date.13– The amount available on the third banking office day after the booking date.14– Funds not collected by beneficiary.15– The amount or quantity is zero.16– No status or condition has been advised.17– A status or condition has been requested.18– No charge is to be made.19– The quantity has been the subject of a rounding operation.20– Intended to last or function indefinitely.
Showing 20 of 145 values defined for element 4405 in D09B.
-
7402 – Code specifying the unique identity of an object.
-
C206 – The identification of an object.
-
7402 – Code specifying the unique identity of an object.
Type: an, Max Length: 35 (Required) -
7405 – Code qualifying the identification of an object.
Type: an, Max Length: 3Valid Codes:AA– A number that is used to identify goods from a freight forwarder/consolidator.AB– The first element in a series of elements that together define the structure of an object.AC– The second element in a series of elements that together define the structure of an object.AD– The third element in a series of elements that together define the structure of an object.AE– The fourth element in a series of elements that together define the structure of an object.AF– The fifth element in a series of elements that together define the structure of an object.AG– The sixth element in a series of elements that together define the structure of an object.AH– The seventh element in a series of elements that together define the structure of an object.AI– The eighth element in a series of elements that together define the structure of an object.AJ– The ninth element in a series of elements that together define the structure of an object.AK– The identity of a data set.AL– [1420] Reference number to identify a kanban card.AM– Level number in a hierarchy or other structure.AN– A unique number identifying a particular assembly or other manufacturing process.AO– A number to identify the position within a package according to agreed rules between partners.AP– A name or number which identifies a product.AQ– Number assigned to a release.AR– Statistical concept.AS– A table of items e.g. figures and text represented in rows and columns.AT– Number identifying a group of articles in a predescribed unit load for shipment/dispatch as agreed between partners.
Showing 20 of 93 values defined for element 7405 in D09B.
-
4405 – Code specifying a status.
Type: an, Max Length: 3Valid Codes:1– Remark that the requested service in the order remains outstanding.2– The instruction has been completed.3– The information has been passed on.4– The amount has the status of finality.5– The amount is subject to finality.6– The amount quoted is a minimum tariff.7– The amount quoted is a fixed tariff.8– The amount quoted is a maximum tariff.9– The amount is quoted for information only, it is not part of the charges to be deducted or added.10– The amount is available today.11– The amount is available on the next banking office day after the booking date.12– The amount is available on the second banking office day after the booking date.13– The amount available on the third banking office day after the booking date.14– Funds not collected by beneficiary.15– The amount or quantity is zero.16– No status or condition has been advised.17– A status or condition has been requested.18– No charge is to be made.19– The quantity has been the subject of a rounding operation.20– Intended to last or function indefinitely.
Showing 20 of 145 values defined for element 4405 in D09B.
-
7402 – Code specifying the unique identity of an object.
-
C206 – The identification of an object.
-
7402 – Code specifying the unique identity of an object.
Type: an, Max Length: 35 (Required) -
7405 – Code qualifying the identification of an object.
Type: an, Max Length: 3Valid Codes:AA– A number that is used to identify goods from a freight forwarder/consolidator.AB– The first element in a series of elements that together define the structure of an object.AC– The second element in a series of elements that together define the structure of an object.AD– The third element in a series of elements that together define the structure of an object.AE– The fourth element in a series of elements that together define the structure of an object.AF– The fifth element in a series of elements that together define the structure of an object.AG– The sixth element in a series of elements that together define the structure of an object.AH– The seventh element in a series of elements that together define the structure of an object.AI– The eighth element in a series of elements that together define the structure of an object.AJ– The ninth element in a series of elements that together define the structure of an object.AK– The identity of a data set.AL– [1420] Reference number to identify a kanban card.AM– Level number in a hierarchy or other structure.AN– A unique number identifying a particular assembly or other manufacturing process.AO– A number to identify the position within a package according to agreed rules between partners.AP– A name or number which identifies a product.AQ– Number assigned to a release.AR– Statistical concept.AS– A table of items e.g. figures and text represented in rows and columns.AT– Number identifying a group of articles in a predescribed unit load for shipment/dispatch as agreed between partners.
Showing 20 of 93 values defined for element 7405 in D09B.
-
4405 – Code specifying a status.
Type: an, Max Length: 3Valid Codes:1– Remark that the requested service in the order remains outstanding.2– The instruction has been completed.3– The information has been passed on.4– The amount has the status of finality.5– The amount is subject to finality.6– The amount quoted is a minimum tariff.7– The amount quoted is a fixed tariff.8– The amount quoted is a maximum tariff.9– The amount is quoted for information only, it is not part of the charges to be deducted or added.10– The amount is available today.11– The amount is available on the next banking office day after the booking date.12– The amount is available on the second banking office day after the booking date.13– The amount available on the third banking office day after the booking date.14– Funds not collected by beneficiary.15– The amount or quantity is zero.16– No status or condition has been advised.17– A status or condition has been requested.18– No charge is to be made.19– The quantity has been the subject of a rounding operation.20– Intended to last or function indefinitely.
Showing 20 of 145 values defined for element 4405 in D09B.
-
7402 – Code specifying the unique identity of an object.
-
C206 – The identification of an object.
-
7402 – Code specifying the unique identity of an object.
Type: an, Max Length: 35 (Required) -
7405 – Code qualifying the identification of an object.
Type: an, Max Length: 3Valid Codes:AA– A number that is used to identify goods from a freight forwarder/consolidator.AB– The first element in a series of elements that together define the structure of an object.AC– The second element in a series of elements that together define the structure of an object.AD– The third element in a series of elements that together define the structure of an object.AE– The fourth element in a series of elements that together define the structure of an object.AF– The fifth element in a series of elements that together define the structure of an object.AG– The sixth element in a series of elements that together define the structure of an object.AH– The seventh element in a series of elements that together define the structure of an object.AI– The eighth element in a series of elements that together define the structure of an object.AJ– The ninth element in a series of elements that together define the structure of an object.AK– The identity of a data set.AL– [1420] Reference number to identify a kanban card.AM– Level number in a hierarchy or other structure.AN– A unique number identifying a particular assembly or other manufacturing process.AO– A number to identify the position within a package according to agreed rules between partners.AP– A name or number which identifies a product.AQ– Number assigned to a release.AR– Statistical concept.AS– A table of items e.g. figures and text represented in rows and columns.AT– Number identifying a group of articles in a predescribed unit load for shipment/dispatch as agreed between partners.
Showing 20 of 93 values defined for element 7405 in D09B.
-
4405 – Code specifying a status.
Type: an, Max Length: 3Valid Codes:1– Remark that the requested service in the order remains outstanding.2– The instruction has been completed.3– The information has been passed on.4– The amount has the status of finality.5– The amount is subject to finality.6– The amount quoted is a minimum tariff.7– The amount quoted is a fixed tariff.8– The amount quoted is a maximum tariff.9– The amount is quoted for information only, it is not part of the charges to be deducted or added.10– The amount is available today.11– The amount is available on the next banking office day after the booking date.12– The amount is available on the second banking office day after the booking date.13– The amount available on the third banking office day after the booking date.14– Funds not collected by beneficiary.15– The amount or quantity is zero.16– No status or condition has been advised.17– A status or condition has been requested.18– No charge is to be made.19– The quantity has been the subject of a rounding operation.20– Intended to last or function indefinitely.
Showing 20 of 145 values defined for element 4405 in D09B.
-
7402 – Code specifying the unique identity of an object.
-
7297 – Code qualifying the type of set.
Type: an, Max Length: 3 (Required)Valid Codes:1– Identification of the product set.2– Identification of the licence set.3– Related numbers identifying a package such as a bar code label number related to a kanban card number, etc.4– A code which indicates that the identities which follow are related to a particular vehicle which may have been previously identified.5– The source database of the data in a data set.6– The target database for the data in a data set.7– A coded or non coded list of values.8– The contract related item numbers.9– Financial security identifier set.10– A code to identify a set of numbers used for accounting.11– A set of numbers to identify a project.12– A set of numbers to identify a plan of work.13– A set of numbers to identify a schedule of work.14– A set of numbers to identify a resource.15– A set of numbers to identify a milestone event.16– A set of numbers to identify an interface work task.17– A set of numbers to identify a work task constraint.18– Position number(s) of a data structure's relevant components.
LOC To identify a place or a location and/or related locations. (Max 99)
Elements and codes as defined at LOC above.
VLI To identify a coded or non coded value list. (Max 1)
-
C780 – The identification of a coded or non coded value list.
-
1518 – To identify a coded or non-coded list of values.
Type: an, Max Length: 35 (Required) -
7405 – Code qualifying the identification of an object.
Type: an, Max Length: 3Valid Codes:AA– A number that is used to identify goods from a freight forwarder/consolidator.AB– The first element in a series of elements that together define the structure of an object.AC– The second element in a series of elements that together define the structure of an object.AD– The third element in a series of elements that together define the structure of an object.AE– The fourth element in a series of elements that together define the structure of an object.AF– The fifth element in a series of elements that together define the structure of an object.AG– The sixth element in a series of elements that together define the structure of an object.AH– The seventh element in a series of elements that together define the structure of an object.AI– The eighth element in a series of elements that together define the structure of an object.AJ– The ninth element in a series of elements that together define the structure of an object.AK– The identity of a data set.AL– [1420] Reference number to identify a kanban card.AM– Level number in a hierarchy or other structure.AN– A unique number identifying a particular assembly or other manufacturing process.AO– A number to identify the position within a package according to agreed rules between partners.AP– A name or number which identifies a product.AQ– Number assigned to a release.AR– Statistical concept.AS– A table of items e.g. figures and text represented in rows and columns.AT– Number identifying a group of articles in a predescribed unit load for shipment/dispatch as agreed between partners.
Showing 20 of 93 values defined for element 7405 in D09B.
-
1518 – To identify a coded or non-coded list of values.
-
C082 – Identification of a transaction party by code.
-
3039 – Code specifying the identity of a party.
Type: an, Max Length: 35 (Required) -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
3039 – Code specifying the identity of a party.
-
C240 – To provide a description of a characteristic.
-
7037 – A code specifying a characteristic.
Type: an, Max Length: 17 (Required) -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
7036 – Free form description of a characteristic.
Type: an, Max Length: 35 -
7036 – Free form description of a characteristic.
Type: an, Max Length: 35
-
7037 – A code specifying a characteristic.
-
4405 – Code specifying a status.
Type: an, Max Length: 3Valid Codes:1– Remark that the requested service in the order remains outstanding.2– The instruction has been completed.3– The information has been passed on.4– The amount has the status of finality.5– The amount is subject to finality.6– The amount quoted is a minimum tariff.7– The amount quoted is a fixed tariff.8– The amount quoted is a maximum tariff.9– The amount is quoted for information only, it is not part of the charges to be deducted or added.10– The amount is available today.11– The amount is available on the next banking office day after the booking date.12– The amount is available on the second banking office day after the booking date.13– The amount available on the third banking office day after the booking date.14– Funds not collected by beneficiary.15– The amount or quantity is zero.16– No status or condition has been advised.17– A status or condition has been requested.18– No charge is to be made.19– The quantity has been the subject of a rounding operation.20– Intended to last or function indefinitely.
Showing 20 of 145 values defined for element 4405 in D09B.
-
1514 – Name of a coded or non-coded list of values.
Type: an, Max Length: 70 -
1507 – Code specifying a designated class.
Type: an, Max Length: 3Valid Codes:1– The code list is classified as UN/ECE WP.4 service data element.2– The code list is classified as international and endorsed by WP.4.3– The code list is classified as other and is not maintained by and not endorsed by WP.4.4– The code list is classified as UN/ECE WP.4 user data element.
-
1505 – Code specifying a type of value list.
Type: an, Max Length: 3Valid Codes:1– The list contains a set of non coded values.2– The list contains a set of dates, dates and times, or times.3– The list contains a set of coded data values.4– The list contains a set of correspondence links between structures.5– The list contains a set of overlapping link values between structures.6– The list contains a set of historic link values between structures.7– The list contains a set of hierarchical link values between structures.8– The list contains a set of group link values between structures.9– The list contains a set of items at multiple hierarchical levels in a structure.10– The list contains a set of items from a classification domain.11– The list contains a set of items at a single hierarchical level in a structure.
-
4513 – Code specifying a maintenance operation.
Type: an, Max Length: 3Valid Codes:1– The data is to be processed as new.2– The data contains new objects, which are to be added, and existing objects, which are to replace objects which have the same identifier.3– The data is to replace existing data which has the same identifier.4– The data identified is to be deleted.5– The data is not to be maintained.6– Maintenance operation involves addition.7– Maintenance operation involves change.8– The item is marked for deletion in a future release.9– Maintenance operation involves repair.10– Maintenance operation involves cleaning.11– Maintenance operation involves waste disposal.12– Maintenance operation involves return of empty packages.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG23 (Max 9)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
DTM To specify date, and/or time, or period. (Max 9)
Elements and codes as defined at DTM above.
Group SG24 (Max 9)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 9)
Elements and codes as defined at COM above.
Group SG25 (Max 99)
TAX To specify relevant duty/tax/fee information. (Max 1) Required
-
C241 – Code and/or name identifying duty, tax or fee.
-
5153 – Code specifying a type of duty, tax or fee.
Type: an, Max Length: 3Valid Codes:AAA– A tax levied on the volume of petroleum being transacted.AAB– Countervailing duty paid in cash prior to a formal finding of subsidization by Customs.AAC– Countervailing duty paid by posting a bond during an investigation period prior to a formal decision on subsidization by Customs.AAD– A tax levied on tobacco products.AAE– General fee or tax for the use of energy.AAF– A tax levied specifically on coffee products.AAG– A harmonized sales tax consisting of a goods and service tax, a Canadian provincial sales tax and, as applicable, a Quebec sales tax which is recoverable.AAH– A sales tax charged within the Canadian province of Quebec which is recoverable.AAI– A sales tax charged within Canadian provinces which is non-recoverable.AAJ– A tax levied on a replacement part, where the original part is returned.AAK– Tax that is levied specifically on products containing mineral oil.AAL– To indicate a special type of tax.ADD– Duty applied to goods ruled to have been dumped in an import market at a price lower than that in the exporter's domestic market.BOL– Tax required in Italy, which may be fixed or graduated in various circumstances (e.g. VAT exempt documents or bank receipts).CAP– Levy imposed on agricultural products where there is a difference between the selling price between trading countries.CAR– A tax that is levied on the value of the automobile.COC– Italian Paper consortium tax.CST– Tax related to a specified commodity, e.g. illuminants, salts.CUD– Duties laid down in the Customs tariff, to which goods are liable on entering or leaving the Customs territory (CCC).CVD– A duty on imported goods applied for compensate for subsidies granted to those goods in the exporting country.
Showing 20 of 53 values defined for element 5153 in D09B.
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
5152 – Name of a type of duty, tax or fee.
Type: an, Max Length: 35
-
5153 – Code specifying a type of duty, tax or fee.
-
C533 – Indication of account reference for duties, taxes and/or fees.
-
5289 – Code specifying a duty or tax or fee account.
Type: an, Max Length: 6 (Required) -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
5289 – Code specifying a duty or tax or fee account.
-
C243 – Rate of duty/tax/fee applicable to commodities or of tax applicable to services.
-
5279 – Code specifying a rate of a duty or tax or fee.
Type: an, Max Length: 7 -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
5278 – Rate of a duty or tax or fee.
Type: an, Max Length: 17 -
5273 – Code specifying the basis for a duty or tax or fee rate.
Type: an, Max Length: 12Valid Codes:1– (5316) To specify that the applicable rate of duty, tax or fee is based on the Customs value (CCC).2– To specify that the applicable rate of duty, tax or fee is based on the weight of the item (CCC).3– (6060) To specify that the applicable rate of duty, tax or fee is based on the quantity of the item (CCC).
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
5279 – Code specifying a rate of a duty or tax or fee.
-
5283 – Code qualifying the function of a duty or tax or fee.
Type: an, Max Length: 3 (Required)Valid Codes:1– Individual duty, tax or fee charged on a single Customs item line of the goods declaration (CCC).2– Total of all duties, taxes and fees charged on a single Customs item line of the goods declaration (CCC).3– Total of each duty, tax or fee charged on the goods declaration (CCC).4– Total of all duties, taxes and fees charged on the goods declaration (CCC).5– Duties laid down in the Customs tariff to which goods are liable on entering or leaving the Customs territory (CCC).6– Charge for services rendered.7– Contribution levied by an authority.9– Code specifying information related to tax.
-
5286 – To specify the basis on which a duty or tax or fee will be assessed.
Type: an, Max Length: 15 -
5305 – Code specifying a duty or tax or fee category.
Type: an, Max Length: 3Valid Codes:A– Code specifying that the rate is based on mixed tax.AA– Tax rate is lower than standard rate.AB– A tax category code indicating the item is tax exempt when the item is bought for future resale.AC– A code to indicate that the Value Added Tax (VAT) amount which is due on the current invoice is to be paid on receipt of a separate VAT payment request.AD– A code to indicate that the Value Added Tax (VAT) amount of a previous invoice is to be paid.AE– Code specifying that the standard VAT rate is levied from the invoicee.B– VAT not to be paid to the issuer of the invoice but directly to relevant tax authority.C– Duty associated with shipment of goods is paid by the supplier; customer receives goods with duty paid.E– Code specifying that taxes are not applicable.G– Code specifying that the item is free export and taxes are not charged.H– Code specifying a higher rate of duty or tax or fee.O– Code specifying that taxes are not applicable to the services.S– Code specifying the standard rate.Z– Code specifying that the goods are at a zero rate.
-
3446 – To identify a number assigned to a party by a tax authority.
Type: an, Max Length: 20 -
1227 – Code specifying a calculation sequence.
Type: an, Max Length: 3Valid Codes:1– Code specifying the first step of a calculation.2– Code specifying the second step of a calculation.3– Code specifying the third step of a calculation.4– Code specifying the fourth step of a calculation.5– Code specifying the fifth step of a calculation.6– Code specifying the sixth step of a calculation.7– Code specifying the seventh step of a calculation.8– Code specifying the eighth step of a calculation.9– Code specifying the ninth step of a calculation.
-
5307 – A code indicating when the duty, tax, or fee payment will be due.
Type: an, Max Length: 3Valid Codes:1– Duty, tax or fee payment is due on the date when the invoice is paid.2– Duty, tax or fee payment is due on the date when the invoice is issued.
DTM To specify date, and/or time, or period. (Max 9)
Elements and codes as defined at DTM above.
ALI To indicate that special conditions due to the origin, customs preference, fiscal or commercial factors are applicable. (Max 9)
Elements and codes as defined at ALI above.
MOA To specify a monetary amount. (Max 99)
Elements and codes as defined at MOA above.
QTY To specify a pertinent quantity. (Max 99)
Elements and codes as defined at QTY above.
Group SG26 (Max 9)
PAI To specify the instructions for payment. (Max 1) Required
-
C534 – Indication of method of payment employed or to be employed.
-
4439 – Code specifying the payment conditions.
Type: an, Max Length: 3Valid Codes:1– An assigned invoice has been paid by the buyer to the factor.2– Credit transaction via an ACH (Automated Clearing House).3– Debit transaction via an ACH (Automated Clearing House).4– Credit transaction via an ACH (Automated Clearing House) to an interest bearing deposit account without a stated maturity.5– Debit transaction via an ACH (Automated Clearing House) to an account paying funds on demand without notice of intended withdrawal.6– Current value of an asset, moved from one account to another, as it appears on the balance sheet (credit).7– Current value of an asset, moved from one account to another, as it appears on the balance sheet (debit).8– Presentment of negotiable instruments to the point of origin, and receiving payment from the paying bank, using a 3rd party with bill of exchange.9– Presentment of negotiable instruments to the point of origin, and receiving payment from the paying bank, using a 3rd party without bill of exchange.10– Written undertaking by a bank to pay a seller against stipulated documents that cannot be amended or cancelled without the consent of all parties involved.11– Written undertaking by a bank to pay a seller against stipulated documents that cannot be amended or cancelled without the consent of all parties involved and that can be transferred by the first beneficiary to one or more beneficiaries.12– Written undertaking by a bank to pay a seller against credit conform stipulated documents that cannot be amended or cancelled without the consent of all parties involved.13– Written undertaking by a bank to pay a seller against credit conform stipulated documents that cannot be amended or cancelled without the consent of all parties involved and that can be transferred by the first beneficiary to one or more beneficiaries.14– Written undertaking by a bank to pay a seller against stipulated documents that can be amended or cancelled at any time.15– Letter of credit that cannot be cancelled or amended without agreement by all the parties involved, and carries the endorsement of both the issuing bank and its correspondent, guaranteeing payment of all drafts written against.16– Any guarantee, bond or other payment undertaking given for the payment of money on presentation in conformity with the terms of the undertaking of a demand for payment and other documents specified.17– Letter of credit that can be cancelled or amended at any time by the issuing bank.18– Letter of credit which is a contingent (future) obligation of the issuing bank to make payment to the designated beneficiary if the bank's customer fails to perform as called for under the terms of a contract.19– Letter of credit that cannot be cancelled or amended before a specific date without agreement by all the parties involved, and carries no guarantee that a correspondent will honour drafts presented for payment.20– A collection in which the seller has already sent the goods and any documents giving control of such goods directly to the buyer, and where he subsequently sends his claim for payment. This type of collection involves financial documents only.
Showing 20 of 52 values defined for element 4439 in D09B.
-
4431 – Code specifying the means of payment guarantee.
Type: an, Max Length: 3Valid Codes:1– Payment of an invoice is made by a factor under the guarantee he issued to seller or to another factor.10– A bank has agreed to stand as guarantor to ensure that payment is made.11– A public authority has agreed to stand as guarantor to ensure that payment is made.12– The party who has agreed to stand as guarantor to ensure that payment is made is neither the payee nor the payer.13– The guarantee of payment is in the form of a standby letter of credit.14– No guarantee of payment has been made or is available.20– The payer has provided possession of, or title in goods, as security against payment.21– The payer has provided title in, or a lien over a business whose assets may be sold or sequestered, as security against payment.23– The payer has provided a warrant or warehouse receipts for goods or property to be held or used as security against payment.24– The payer has provided a mortgage as security against payment.45– A certificate of insurance has been provided as a guarantee of eventual payment.ZZZ– A code assigned within a code list to be used on an interim basis and as defined among trading partners until a precise code can be assigned to the code list.
-
4461 – Code identifying a means of payment.
Type: an, Max Length: 3Valid Codes:1– Not defined legally enforceable agreement between two or more parties (expressing a contractual right or a right to the payment of money).2– A credit transaction made through the automated clearing house system.3– A debit transaction made through the automated clearing house system.4– A request to reverse an ACH debit transaction to a demand deposit account.5– A request to reverse a credit transaction to a demand deposit account.6– A credit transaction made through the ACH system to a demand deposit account.7– A debit transaction made through the ACH system to a demand deposit account.8– Indicates that the bank should hold the payment for collection by the beneficiary or other instructions.9– Indicates that the payment should be made using the national or regional clearing.10– Payment by currency (including bills and coins) in circulation, including checking account deposits.11– A request to reverse an ACH credit transaction to a savings account.12– A request to reverse an ACH debit transaction to a savings account.13– A credit transaction made through the ACH system to a savings account.14– A debit transaction made through the ACH system to a savings account.15– A credit entry between two accounts at the same bank branch. Synonym: house credit.16– A debit entry between two accounts at the same bank branch. Synonym: house debit.17– A credit transaction made through the ACH system to a demand deposit account using the CCD payment format.18– A debit transaction made through the ACH system to a demand deposit account using the CCD payment format.19– A credit transaction made through the ACH system to a demand deposit account using the CTP payment format.20– Payment by a pre-printed form on which instructions are given to an account holder (a bank or building society) to pay a stated sum to a named recipient.
Showing 20 of 75 values defined for element 4461 in D09B.
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
4435 – Code specifying the payment channel.
Type: an, Max Length: 3Valid Codes:1– The payment shall be/has been made via ordinary post.2– The payment shall be/has been made via air mail.3– The payment shall be/has been made via telegraph.4– The payment shall be/has been made via telex.5– Society for Worldwide Interbank Financial Telecommunications s.c.6– The payment shall be/has been made via other transmission networks.7– The payment shall be/has been made via not defined networks.8– The payment shall be/has been made via Fedwire.9– Indicates that payment should be made by the bank to the beneficiary or his identified agent, in person.10– The payment shall be/has been made via registered air mail.11– The payment shall be/has been made via registered mail.12– Public courier service.13– Private messenger service.14– Nation wide clearing house for automated payment.15– Other than nation wide clearing house system.ZZZ– A code assigned within a code list to be used on an interim basis and as defined among trading partners until a precise code can be assigned to the code list.
-
4439 – Code specifying the payment conditions.
RFF To specify a reference. (Max 99)
Elements and codes as defined at RFF above.
MOA To specify a monetary amount. (Max 99)
Elements and codes as defined at MOA above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG27 (Max 9)
GIR To specify a related set of identification numbers. (Max 1) Required
Elements and codes as defined at GIR above.
LOC To identify a place or a location and/or related locations. (Max 99)
Elements and codes as defined at LOC above.
VLI To identify a coded or non coded value list. (Max 1)
Elements and codes as defined at VLI above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG28 (Max 1)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
DTM To specify date, and/or time, or period. (Max 9)
Elements and codes as defined at DTM above.
Group SG29 (Max 9)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 9)
Elements and codes as defined at COM above.
Group SG30 (Max 99999)
PAC To describe the number and type of packages/physical units. (Max 1) Required
-
C531 – Packaging level and details, terms and conditions.
-
7075 – Code specifying a level of packaging.
Type: an, Max Length: 3Valid Codes:1– Level of packing, if it exists, that is immediately subordinate to the intermediate packaging level.2– Level of packaging, if it exists, that is immediately subordinate to the outer packaging level.3– For packed merchandise, outermost level of packaging for a shipment.4– There is no specifiable level of packaging: packaging is inner and outer level as well.5– The packaging level being described is the shipment level.
-
7233 – Code specifying information related to packaging.
Type: an, Max Length: 3Valid Codes:1– The ingredients of the product are not marked on the packaging of the product.2– The product price is not marked on the packaging of the product.3– The product best before date is not marked on the packaging of the product.4– Package is not marked as recyclable.5– A code indicating that promotional details have been marked on the package.6– The item is labeled according to the general EAN.UCC specifications for clothing and fashion accessories.7– The package is marked with the last date on which the item may be sold.8– The package is marked with the last date on which the item may be used.9– The package is marked with the date of the packaging or manufacturing of the item.10– Package is not marked with any kind of date indicating freshness, such as use-by, best before or packaging date.31– Package is marked with the product best before date.32– The package is marked recyclable.33– The package is marked returnable.34– The information is related to product marking.35– The information is related to the type of package.36– The information specifies the package.37– The information is related to protection of the package.38– The information describes how coverage with tarpaulins is to be provided.39– The information describes the platform or skid location.40– The information gives the location of the load bearing piece.
Showing 20 of 62 values defined for element 7233 in D09B.
-
7073 – Code specifying the packaging terms and conditions.
Type: an, Max Length: 3Valid Codes:1– The cost of packaging is paid by the supplier.2– The cost of packaging is paid by the recipient.3– There is no charge for packaging because it is returnable.4– The packaging terms and conditions are specified by the buyer.5– Reusable packaging owned by the carrier.6– Disposable packaging supplied by the carrier.7– Reusable packaging owned by the seller.8– Disposable packaging supplied by the seller.9– Reusable packaging specifically designed for packaging of the referenced item and owned by the buyer.10– Disposable packaging specifically designed for packaging of the referenced item.11– Reusable multi-purpose packaging owned by the buyer.12– Reusable multi-purpose packaging owned by the seller.13– The referenced item is to be supplied without packaging.14– Non-standard reusable packaging owned by the seller.15– The packaging used must meet durability and handling characteristics required for item export.16– The packaging used must meet durability and handling characteristics required for domestic usage.17– The cost of packaging is included in the item price.18– The cost of packaging is shared equally between the buyer and seller.19– The packaging cost will be invoiced on a separate message or document.20– The packaging is free of charge.
Showing 20 of 30 values defined for element 7073 in D09B.
-
7075 – Code specifying a level of packaging.
-
C202 – Type of package by name or by code from a specified source.
-
7065 – Code specifying the type of package.
Type: an, Max Length: 17 -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
7064 – Description of the form in which goods are presented.
Type: an, Max Length: 35
-
7065 – Code specifying the type of package.
-
C402 – Identification of the form in which goods are described.
-
7077 – Code specifying the format of a description.
Type: an, Max Length: 3 (Required)Valid Codes:A– Long description of an item in free form.B– Description of an item in coded and free form text.C– Description of an item in coded format.D– Price look-up description of a product for point of sale receipts.E– Short description of an item in free form.F– Description of an item in free form text.S– Description of an item in a structured format.X– Description of an item in a coded and free text format.
-
7064 – Description of the form in which goods are presented.
Type: an, Max Length: 35 (Required) -
7143 – Coded identification of an item type.
Type: an, Max Length: 3Valid Codes:AA– Number assigned by manufacturer or seller to identify the release of a product.AB– The item number is that of an assembly.AC– Article identifier used within health sector to indicate data used conforms to HIBC.AD– Number assigned to a cold roll.AE– Number assigned to a hot roll.AF– Number assigned to a slab, which is produced in a particular production step.AG– A number assigned to indicate a revision of software.AH– An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.AI– A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.AJ– Number assigned to a sample.AK– Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).AL– A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.AM– A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.AN– A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.AO– A code which specifies the codification of the state's labelling requirements.AP– Number assigned to the heat (also known as the iron charge) for the production of steel products.AQ– A number identifying a coupon.AR– A number to identify a resource.AS– A number to identify a work task.AT– Identification number on a product allowing a quick electronic retrieval of price information for that product.
Showing 20 of 164 values defined for element 7143 in D09B.
-
7064 – Description of the form in which goods are presented.
Type: an, Max Length: 35 -
7143 – Coded identification of an item type.
Type: an, Max Length: 3Valid Codes:AA– Number assigned by manufacturer or seller to identify the release of a product.AB– The item number is that of an assembly.AC– Article identifier used within health sector to indicate data used conforms to HIBC.AD– Number assigned to a cold roll.AE– Number assigned to a hot roll.AF– Number assigned to a slab, which is produced in a particular production step.AG– A number assigned to indicate a revision of software.AH– An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.AI– A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.AJ– Number assigned to a sample.AK– Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).AL– A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.AM– A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.AN– A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.AO– A code which specifies the codification of the state's labelling requirements.AP– Number assigned to the heat (also known as the iron charge) for the production of steel products.AQ– A number identifying a coupon.AR– A number to identify a resource.AS– A number to identify a work task.AT– Identification number on a product allowing a quick electronic retrieval of price information for that product.
Showing 20 of 164 values defined for element 7143 in D09B.
-
7077 – Code specifying the format of a description.
-
C532 – Indication of responsibility for payment and load contents of returnable packages.
-
8395 – Code specifying the responsibility for the freight payment for a returnable package.
Type: an, Max Length: 3Valid Codes:1– The freight charges involved with returning of the packaging are to be paid by the customer.2– There is no charge for the freight of returning the packaging.3– The responsibility for the freight for returning the packaging is to be paid by the supplier.ZZZ– A code assigned within a code list to be used on an interim basis and as defined among trading partners until a precise code can be assigned to the code list.
-
8393 – Code specifying the load contents for a returnable package.
Type: an, Max Length: 3Valid Codes:1– Loaded with empty 4-block for blocking purposes.2– The container is, has been, or will be returned with dunnage only.3– The container is, has been, or will be returned empty.4– The package is, has been, or will be returned loaded with production material.6– The package is, has been, or will be returned loaded with obsolete material.7– The package is, has been, or will be returned loaded with excess production material.8– The package is, has been, or will be returned loaded with rejected material.10– The package is, has been, or will be returned loaded with processed material.11– An empty container, which is folded.
-
8395 – Code specifying the responsibility for the freight payment for a returnable package.
-
7224 – To specify the number of packages.
Type: n, Max Length: 8
PCI To specify markings and labels on individual packages or physical units. (Max 99)
-
C210 – Shipping marks on packages in free text; one to ten lines.
-
7102 – Free form description of the shipping marks.
Type: an, Max Length: 35 (Required) -
7102 – Free form description of the shipping marks.
Type: an, Max Length: 35 -
7102 – Free form description of the shipping marks.
Type: an, Max Length: 35 -
7102 – Free form description of the shipping marks.
Type: an, Max Length: 35 -
7102 – Free form description of the shipping marks.
Type: an, Max Length: 35 -
7102 – Free form description of the shipping marks.
Type: an, Max Length: 35 -
7102 – Free form description of the shipping marks.
Type: an, Max Length: 35 -
7102 – Free form description of the shipping marks.
Type: an, Max Length: 35 -
7102 – Free form description of the shipping marks.
Type: an, Max Length: 35 -
7102 – Free form description of the shipping marks.
Type: an, Max Length: 35
-
7102 – Free form description of the shipping marks.
-
C827 – Specification of the type of marking that reflects the method that was used and the conventions adhered to for marking (e.g. of packages).
-
7511 – Code specifying the type of marking.
Type: an, Max Length: 3 (Required)Valid Codes:1– Indication that the package is not marked with an EAN.UCC (International Article Numbering.Uniform Code Council) system code.
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
7511 – Code specifying the type of marking.
-
4233 – Code specifying instructions for marking.
Type: an, Max Length: 3Valid Codes:1– Packaging should not be marked with supplier's company name.2– Packaging should be marked with customer's company name.3– Packaging should be marked with customer's references.4– Packaging should also be marked with customer's article description.5– Packaging should be marked with customer's article description only.6– Packaging should be marked with package's dimensions.7– Packaging should be marked with net weight.8– Packaging should be marked with gross weight.9– Packaging should be marked with tare weight.10– Packaging should be marked with batch number.11– Packaging should be marked with customer's article number.12– Packaging should be marked with the running number of packages.13– Packaging should be marked with the date of production.14– Packaging should be marked with the expiry date.15– Packaging should be marked with the supplier number.16– Markings as specified by the buyer.17– Markings as specified by the seller.18– Markings as specified by carrier.19– Markings as specified by law.20– Markings as specified by industry.
Showing 20 of 35 values defined for element 4233 in D09B.
-
8169 – Code indicating whether an object is full or empty.
Type: an, Max Length: 3Valid Codes:1– Indicates that there is more than a quarter of the volume available.2– Indicates that there is more than a half of the volume available.3– Indicates that there is more than three quarters of the volume available.4– Indicates that the object is empty.5– Indicates that the object is full.6– Indicates that there is no space available in the object.7– Indicates that the equipment is fully loaded, and includes a number LCL (Less Than Container Load) consignments.8– Indicates that the container is fully loaded with a single FCL (Full Container Load) consignment.9– Container represents part of a consignment declared on a single Customs declaration (i.e. the Customs declaration covers more than one container).10– Container represents part of the consignment declared on a single Customs declaration with the remainder being in other containers. Other goods, related to other declarations, are also in the container.11– Merchandise within a container/package covered by a single invoice.12– Merchandise within a container/package covered by more than one invoice.13– A container representing a consignment of goods for one consignee with multiple bill of lading numbers.
FTX To provide free form or coded text information. (Max 1)
Elements and codes as defined at FTX above.
GEI To identify processing information. (Max 1)
Elements and codes as defined at GEI above.
DIM To specify dimensions. (Max 1)
-
C211 – Specification of the dimensions of a transportable unit.
-
6411 – Code specifying the unit of measurement.
Type: an, Max Length: 8 (Required) -
6168 – To specify the value of a length dimension.
Type: n, Max Length: 15 -
6140 – To specify the value of a width dimension.
Type: n, Max Length: 15 -
6008 – To specify the value of a height dimension.
Type: n, Max Length: 15
-
6411 – Code specifying the unit of measurement.
-
6145 – Code qualifying the type of the dimension.
Type: an, Max Length: 3 (Required)Valid Codes:1– The dimension expressed in a gross value.2– The dimension of the goods including the packaging.3– The dimension of a pallet excluding the goods.4– The dimension of a pallet including the goods.5– The dimension in the length that the cargo exceeds the standard length at the front of an equipment.6– The dimension in the length that the cargo exceeds the standard length at the back of an equipment.7– The dimension in the width that the cargo exceeds the standard width at the right side of an equipment.8– The dimension in the width that the cargo exceeds the standard width at the left side of an equipment.9– The dimensions that the cargo exceeds the standard dimensions.10– The external dimensions of transport equipment.11– The internal dimensions of equipment.12– Dimensions of the damaged area.13– The dimension in the height that the cargo exceeds the standard height at the top of a piece of equipment.14– Dimensions (width and height) of the equipment door.15– The dimension of the width that the cargo exceeds the standard width of a piece of equipment.16– The dimension of the length that the cargo exceeds the standard length of a piece of equipment.
MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 1)
-
C502 – Identification of measurement type.
-
6313 – Code specifying the attribute measured.
Type: an, Max Length: 3Valid Codes:A– The measured consolidated weight.AAA– [6160] Weight of goods including any packaging that normally going with the goods.AAB– [6292] Weight (mass) of goods including packing but excluding the carrier's equipment.AAC– Total weight of goods excluding packaging.AAD– [6012] Total gross weight (mass) of all goods items referred to as one consignment including packaging but excluding any transport equipment.AAF– [6048] Weight (mass) if goods without any packaging.AAG– Force exerted by a thruster installed at the stern of a vessel.AAH– Force exerted by a thruster installed at the bow of a vessel.AAI– The hydrate content of an alcoholic product at the moment of bottling.AAJ– The number of units contained on a pallet.AAK– An indication of the fat content of a product.AAM– [6300] The measure of the overall size of a ship determined in accordance with the provisions of the International Convention on Tonnage Measurement of Ships, 1969.AAN– [6302] The measure of the useful capacity of a ship determined in accordance with the provisions of the International Convention on Tonnage Measurement of Ships, 1969.AAO– Degree of moisture.AAP– Electromotive force, or difference of electronic potential between two points.AAQ– Value of energy consumption.AAR– Measurement of the rate of dispersal of heat.AAS– Measurement of the flow of air.AAT– Measurement of the impact of a shock.AAU– Temperature identified system or process works according to specifications.
Showing 20 of 257 values defined for element 6313 in D09B.
-
6321 – Code specifying the significance of a measurement.
Type: an, Max Length: 3Valid Codes:3– The measurement is approximately equal to that specified.4– The measurement is equal to that specified.5– The measurement is greater than or equal to that specified.6– The measurement is greater than that specified.7– The measurement is less than that specified.8– The measurement is less than or equal to that specified.9– Average value for a specific series of readings.10– The measurement is not equal to that specified.12– The measurement reported is a true value.13– The measurement reported is an observed value.14– The measurement marked on the object.15– The measurement reported is out of range.
-
6313 – Code specifying the attribute measured.
-
C174 – Measurement value and relevant minimum and maximum values of the measurement range.
-
6411 – Code specifying the unit of measurement.
Type: an, Max Length: 8 (Required) -
6314 – To specify the value of a measurement.
Type: an, Max Length: 18 -
6162 – To specify the minimum value of a range.
Type: n, Max Length: 18 -
6152 – To specify the maximum value of a range.
Type: n, Max Length: 18 -
6432 – Count of the number of significant digits.
Type: n, Max Length: 2
-
6411 – Code specifying the unit of measurement.
-
6311 – Code qualifying the purpose of the measurement.
Type: an, Max Length: 3 (Required)Valid Codes:AAA– Line item measurement specified by the Food and Drug Administration.AAB– Specified measurements refer to transport conditions for delivery to a distribution centre.AAC– Size of a retail container in terms of volume.AAD– Measurement to be used by/for other United States government agencies.AAE– [6314] To specify the value of a measurement.AAF– The measurement of a consignment or part for customs purpose.AAG– The measurement of the alcohol content.AAH– The total weight of an identified dimension.AAI– Weight at line item level.AAJ– Measurement reportable for visaed merchandise.AAK– Quantity to be written off from the total license amount.AAL– Total tonnage of cargo loaded onto the conveyance.AAM– Total tonnage of cargo unloaded from the conveyance.AAN– Tonnage of conveyance.AAO– Registered summer dead weight total tonnage of the vessel.AAP– Total weight of containerized cargo on vessel.AAQ– Total weight of non-containerized cargo on vessel.AAR– Primary reportable quantity associated with a tariff number.AAS– Secondary reportable quantity associated with a tariff number.AAT– Third reportable quantity associated with a tariff number.
Showing 20 of 102 values defined for element 6311 in D09B.
-
7383 – Code specifying the surface or layer of an object.
Type: an, Max Length: 3Valid Codes:1S– The location is side one.2S– The location is side two.AA– To indicate that the entity being specified is on the surface.AB– To indicate that the entity being specified is off the surface.AC– Specifies that the surface/layer/position being described is the soluble portion.AD– The surface or layer of the product being described is the opposite corners.AE– The surface or layer of the product being described are the corner diagonals.AF– The left-hand side (looking forward) of a ship, boat or aircraft.AG– The right-hand side (looking forward) of a ship, boat or aircraft.AH– Surface of a tooth directed toward the face and opposite the lingual surface.AI– Surface of the tooth relating to the cutting edge of the anterior teeth, incisors or canines.AJ– Surface of the tooth toward the back of the dental arch, or away from the midline.AK– Surface of the tooth pertaining to or around the cheek.AL– Surface of the tooth pertaining to the masticating surfaces of the posterior teeth.AM– Surface of the tooth pertaining to or around the tongue.AN– Surface of the tooth toward the midline of the dental arch.BC– The location is at the back of the cab.BS– The location is both sides.BT– The location is on the bottom.DF– The location is in the dual fuel tank positions.
Showing 20 of 33 values defined for element 7383 in D09B.
Group SG31 (Max 9)
TMP To specify the temperature setting. (Max 1) Required
-
C239 – The temperature under which the goods are (to be) stored or shipped.
-
6246 – To specify the value of a temperature.
Type: n, Max Length: 15 -
6411 – Code specifying the unit of measurement.
Type: an, Max Length: 8
-
6246 – To specify the value of a temperature.
-
6245 – Code qualifying the type of a temperature.
Type: an, Max Length: 3 (Required)Valid Codes:1– [6240] The temperature at which the cargo is to be kept while it is in storage.2– [6242] The temperature at which cargo is to be kept while it is under transport.3– The temperature at which cargo is to be kept during cargo handling.4– The temperature at which emergency procedures apply for the disposal of temperature-controlled goods.5– The maximum temperature at which certain products can be safely transported.6– The temperature at which a liquid begins to boil.7– The recorded temperature.
MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 1)
Elements and codes as defined at MEA above.
DGS To identify dangerous goods. (Max 1)
-
C205 – The identification of the dangerous goods in code.
-
8351 – Code identifying a hazard.
Type: an, Max Length: 7 (Required) -
8078 – To identify an additional hazard classification.
Type: an, Max Length: 7 -
8092 – To identify the version number of a hazard code.
Type: an, Max Length: 10
-
8351 – Code identifying a hazard.
-
C234 – Information on dangerous goods, taken from the United Nations Dangerous Goods classification.
-
7124 – The unique serial number assigned within the United Nations to substances and articles contained in a list of the dangerous goods most commonly carried.
Type: n, Max Length: 4 -
7088 – To describe the flahspoint of dangerous goods.
Type: an, Max Length: 8
-
7124 – The unique serial number assigned within the United Nations to substances and articles contained in a list of the dangerous goods most commonly carried.
-
C223 – Temperature at which a vapor can be ignited as per ISO 1523/73.
-
7106 – To specify the value of the flashpoint of a shipment.
Type: n, Max Length: 3 -
6411 – Code specifying the unit of measurement.
Type: an, Max Length: 8
-
7106 – To specify the value of the flashpoint of a shipment.
-
C235 – These numbers appear on the hazard identification placard required on the means of transport.
-
8158 – To specify the identity number for the upper part of the orange hazard placard required on the means of transport.
Type: an, Max Length: 4 -
8186 – To specify the identity number for the lower part of the orange hazard placard required on the means of transport.
Type: an, Max Length: 4
-
8158 – To specify the identity number for the upper part of the orange hazard placard required on the means of transport.
-
C236 – Markings identifying the type of hazardous goods and similar information.
-
8246 – To identify the marking of dangerous goods.
Type: an, Max Length: 4 -
8246 – To identify the marking of dangerous goods.
Type: an, Max Length: 4 -
8246 – To identify the marking of dangerous goods.
Type: an, Max Length: 4 -
8246 – To identify the marking of dangerous goods.
Type: an, Max Length: 4
-
8246 – To identify the marking of dangerous goods.
-
C289 – To specify a restriction for transport through tunnels.
-
8461 – A code indicating a restriction for transport through tunnels.
Type: an, Max Length: 6 -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
8461 – A code indicating a restriction for transport through tunnels.
-
8273 – Code specifying a dangerous goods regulation.
Type: an, Max Length: 3Valid Codes:ADR– European agreement on the international carriage of dangerous goods on road. ADR is the abbreviation of "Accord europeen relatif au transport international des marchandises dangereuses par route".ADS– European agreement giving regulations for the transport of dangerous goods on the river Rhine, officially known as: "Accord europeen relatif au transport international des marchandises dangereuses par navigation sur le Rhin.".ADT– Canadian transport of dangerous goods requirements as published by Transport Canada in the Canadian Gazette, Part II.ADU– Regulation regarding the handling of dangerous goods on vessels issued by Japanese maritime safety agency.ADV– International Convention for the Prevention of Pollution from Ships, 1973, as modified by the Protocol of 1978 relating.AGS– Combined German and European regulations for the transportation of dangerous goods on German and other European roads. ADR means: Accord Europeen relatif au Transport international des marchandises Dangereuses par Route. GGVS means: Gefahrgutverordnung Strasse.ANR– Regulations for dangerous goods transportation on the Rhine.ARD– Combined European regulations for the combined transportation of dangerous goods on roads and rails. ARD means: Autorisation de transport par Route de matieres dangereuses. RID means: Reglement International concernant le transport des marchandises Dangereuses par chemin de fer.CFR– United States federal regulations issued by the US Department of transportation covering the domestic transportation of dangerous goods by truck, rail, water and air.COM– Combined German and European regulations for the combined transportation of dangerous goods on German and other European roads and rails. ADR means: Accord Europeen relatif au transport international des marchandises Dangereuse par Route. RID means: Reglement International concernant le transport des marchandises Dangereuses par chemin de fer. GGVS means: Gefahrgutverordnung Strasse. GGVE means: Gefahrgutverordnung Eisenbahn.GVE– German regulation for the transportation of dangerous goods on rail.GVS– German regulation for the transportation of dangerous goods on road.ICA– Regulations covering the international transportation of dangerous goods issued by the International Air Transport Association and the International Civil Aviation Organization.IMD– Regulations regarding the transportation of dangerous goods on ocean-going vessels issued by the International Maritime Organization.RGE– Combined German and European regulations for the transportation of dangerous goods on German and other European rails. RID means: Reglement International concernant le transport des marchandises Dangereuses par chemin de fer. GGVE means: Gefahrgutverordnung Eisenbahn.RID– International regulations concerning the international carriage of dangerous goods by rail. RID is the abbreviation of "Reglement International concernant le transport des marchandises Dangereuses par chemin de fer".UI– The United Kingdom (UK) version of the International Maritime Organisation (IMO) book on dangerous goods.ZZZ– Additional and/or other information for the transportation of dangerous goods which are mutually defined.
-
8339 – Code specifying the level of danger for which the packaging must cater.
Type: an, Max Length: 3Valid Codes:1– Packaging meeting criteria to pack hazardous materials with great danger. Group I according to IATA/IMDG/ADR/RID regulations.2– Packaging meeting criteria to pack hazardous materials with medium danger. Group II according to IATA/IDMG/ADR/RID regulations.3– Packaging meeting criteria to pack hazardous materials with minor danger. Group III according to IATA/IDMG/ADR/RID regulations.4– No packaging danger level has been assigned.
-
8364 – To identify the emergency procedure number for ships transporting dangerous goods. Synonym: EMS Number.
Type: an, Max Length: 6 -
8410 – To identify a Medical First Aid Guide (MFAG) for hazardous goods.
Type: an, Max Length: 4 -
8126 – To identify a transport emergency (TREM) card.
Type: an, Max Length: 10 -
8255 – Code specifying a type of packing instruction.
Type: an, Max Length: 3 -
8179 – Code specifying the means of transport.
Type: an, Max Length: 8 -
8211 – Code specifying the authorisation for the transportation of hazardous cargo.
Type: an, Max Length: 3
Group SG32 (Max 9)
TDT To specify information regarding the transport such as mode of transport, means of transport, its conveyance reference number and the identification of the means of transport. (Max 1) Required
-
C220 – Method of transport code or name. Code preferred.
-
8067 – Code specifying the name of a mode of transport.
Type: an, Max Length: 3 -
8066 – Name of a mode of transport.
Type: an, Max Length: 17
-
8067 – Code specifying the name of a mode of transport.
-
C001 – Code and/or name identifying the type of means of transport.
-
8179 – Code specifying the means of transport.
Type: an, Max Length: 8 -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
8178 – Free form description of the means of transport.
Type: an, Max Length: 17
-
8179 – Code specifying the means of transport.
-
C040 – Identification of a carrier by code and/or by name. Code preferred.
-
3127 – To identify a carrier.
Type: an, Max Length: 17 -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
3126 – Name of a carrier.
Type: an, Max Length: 35
-
3127 – To identify a carrier.
-
C401 – To provide details of reason for, and responsibility for, use of transportation other than normally utilized.
-
8457 – Code specifying the reason for excess transportation.
Type: an, Max Length: 3 (Required)Valid Codes:A– The reason for the excess transportation is due to special rail car order, schedule increase forecast change.B– The reason for the excess transportation is due to engineering change or late release.C– The reason for the excess transportation is due to special rail car order, schedule increase forecast change specification (schedule) error/overbuilding.D– The reason for the excess transportation is due to shipment tracing delay.E– The reason for the excess transportation is due to plant inventory loss.F– The reason for the excess transportation is due to building ahead of schedule.G– The reason for the excess transportation is due to vendor behind schedule.H– The reason for the excess transportation is due to failure to include costs in last shipment.I– The reason for the excess transportation is due to carrier loss claim.J– The reason for the excess transportation is due to transportation failure.K– The reason for the excess transportation is due to insufficient weight for carload.L– The reason for the excess transportation is due to reject or discrepancy.M– The reason for the excess transportation is due to transportation delay.N– The reason for the excess transportation is due to lack of railcar of railroad equipment.P– The reason for the excess transportation is due to releasing error.R– The reason for the excess transportation is due to record error or cate reported discrepancy report.T– The reason for the excess transportation is due to common or peculiar part schedule increase.U– The reason for the excess transportation is due to alternative supplier shipping for responsible supplier.V– The reason for the excess transportation is due to direct schedule or locally controlled.W– The reason for the excess transportation is due to purchasing waiver approved.
Showing 20 of 23 values defined for element 8457 in D09B.
-
8459 – Code specifying the responsibility for excess transportation.
Type: an, Max Length: 3 (Required)Valid Codes:B– The responsibility for excess transportation is with the material release issuer.S– The responsibility for excess transportation is with the supplier authority.X– The responsibility for the excess transportation is to be determined.ZZZ– A code assigned within a code list to be used on an interim basis and as defined among trading partners until a precise code can be assigned to the code list.
-
7130 – To identify the authorisation to ship issued by the customer.
Type: an, Max Length: 17
-
8457 – Code specifying the reason for excess transportation.
-
C222 – Code and/or name identifying the means of transport.
-
8213 – Identifies the name of the transport means.
Type: an, Max Length: 35 -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
8212 – Name identifying a means of transport.
Type: an, Max Length: 70 -
8453 – Code specifying the nationality of a means of transport.
Type: an, Max Length: 3
-
8213 – Identifies the name of the transport means.
-
8051 – Code qualifying a specific stage of transport.
Type: an, Max Length: 3 (Required)Valid Codes:1– Transport by which goods are moved from or to the frontier, or between inland points.2– Point by which the means of transport are presumed to have left the statistical territory of despatch or to have entered the statistical territory of arrival.3– Transport by which goods are moved to the place of arrival.4– The means of transport used to carry goods that have come under transit procedures of the customs administration to which a transit declaration is being made.5– The means of transport moving into and out of a regulatory territory.6– The means of transport moving into a regulatory territory at the first port of arrival.10– Transport by which the goods are moved prior to their main carriage transport.11– Transport by which goods are moved to the Customs frontier.12– Transport by which goods are moved from the place of departure.13– Transport by which goods are moved at the place of destination.15– The fourth carrier of the ordered transport.16– The fifth carrier of the ordered transport.17– The sixth carrier of the ordered transport.18– The seventh carrier of the ordered transport.19– The eighth carrier of the ordered transport.20– The primary stage in the movement of cargo from the point of origin to the intended destination.21– The first carrier of the ordered transport when more than one carrier is involved.22– The second carrier of the ordered transport when more than one carrier is involved.23– The third carrier of the ordered transport when more than one carrier is involved.24– Transport by which goods are moved via an inland body of water.
Showing 20 of 29 values defined for element 8051 in D09B.
-
8028 – To identify a journey of a means of transport.
Type: an, Max Length: 17 -
8101 – Code specifying the direction of transport.
Type: an, Max Length: 3Valid Codes:BS– The transport from the buyer to the seller.SB– The transport from the seller to the buyer.SC– The transport from the subcontractor to the seller.SD– The transport from the seller to the drop ship designated location.SF– The transport from the seller to the freight forwarder.SS– The transport from the seller to the subcontractor.ST– Cargo is transferred from the main carriage or mother vessel to a lighter.SU– Cargo is transferred from the lighter vessel to a main carriage or mother vessel.ZZZ– A code assigned within a code list to be used on an interim basis and as defined among trading partners until a precise code can be assigned to the code list.
-
8281 – Code indicating the ownership of a means of transport.
Type: an, Max Length: 3Valid Codes:1– The owner of the transported goods is also the owner of the means of transport or rented it for this transport.2– The owner of the transported goods does not own the means of transport or has not rented it for this transport.3– A code indicating privately owned transport.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
RFF To specify a reference. (Max 99)
Elements and codes as defined at RFF above.
QTY To specify a pertinent quantity. (Max 99)
Elements and codes as defined at QTY above.
MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 99)
Elements and codes as defined at MEA above.
MOA To specify a monetary amount. (Max 99)
Elements and codes as defined at MOA above.
POC To specify the purpose of the call of the conveyance. (Max 99)
-
C525 – Description of the purpose of the call of the conveyance.
-
8025 – Code specifying the purpose of the conveyance call.
Type: an, Max Length: 3Valid Codes:1– Discharging and/or loading of cargo.2– Embarking and/or disembarking of passengers.3– Taking bunker (refuelling).4– Changing crew member(s).5– Friendly visit.6– Taking supplies.7– To effect repair.8– Inactive service.9– Awaiting job order.10– Miscellaneous purpose of call.11– Embarking and/or disembarking of crews.12– To visit a port for cruise, leisure and recreation.13– This is a visit to a port which has been ordered by government.14– To have a quarantine inspection.15– To seek protection against something unpleasant and/or threatening such as bad weather or danger.16– Discharging of cargo from the means of transport.17– Loading of cargo onto the means of transport.18– Vessel to undergo repair in a dry dock.19– Repair of a vessel in a dock without removing the surrounding water.20– Cargo tanks of the means of transport will be cleaned.
Showing 20 of 23 values defined for element 8025 in D09B.
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
8024 – Free form description of the purpose of the conveyance call.
Type: an, Max Length: 35
-
8025 – Code specifying the purpose of the conveyance call.
DIM To specify dimensions. (Max 99)
Elements and codes as defined at DIM above.
FTX To provide free form or coded text information. (Max 99)
Elements and codes as defined at FTX above.
GDS To indicate the type of cargo as a general classification. (Max 99)
-
C703 – Rough classification of a type of cargo.
-
7085 – Code specifying the classification of a type of cargo.
Type: an, Max Length: 3 (Required)Valid Codes:1– Printed, typed or written matter including leaflets, pamphlets, certificates etc., which are not subject to import duties and taxes, restrictions and prohibitions.2– Imported consignments/items/goods in respect of which Customs duties and other taxes are waived as they are below a value determined by the Customs administration.3– Imported consignments/items/goods in respect of which Customs duties and other taxes are payable are below a certain amount as determined by the Customs administration.4– Imported consignments/items/goods which are determined as having a value above a certain amount fixed by the Customs administration, which may or may not attract duties and taxes.5– Non-containerized cargo which cannot be categorized by any of the other nature of cargo code.6– Vehicles which are not stowed in containers.7– Cargo transported or to be transported on roll-on roll- off vessels and which is transportable on its own wheels or stowed on special heavy duty trailers.8– Non-containerized cargo which is palletized.9– Cargo stowed or to be stowed in a container.10– Non-containerized cargo stowed in vessels' holds.11– Cargo with dangerous properties, according to appropriate dangerous goods regulations.12– Cargo of a general nature, not otherwise specified.13– Cargo in liquid form.14– Cargo transported under specified temperature conditions.15– Cargo is an environmental pollutant.16– Cargo which is not hazardous.17– Cargo transported under diplomatic conditions.18– Cargo for military purposes.19– Cargo that is objectionable to human senses.20– Cargo that has at least one non-standard dimension.
Showing 20 of 23 values defined for element 7085 in D09B.
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
7085 – Code specifying the classification of a type of cargo.
STS To specify the status of an object or service, including its category and the reason(s) for the status. (Max 1)
Elements and codes as defined at STS above.
GPO To specify a geographical position. (Max 1)
-
6029 – Code identifying the type of a geographical position.
Type: an, Max Length: 3 (Required)Valid Codes:1– A geographical position identifying the start.2– A geographical position identifying the end.3– Point on the border of a surface area.4– Location of ship-to-ship activity.
-
6000 – To specify the angular distance, measured in degrees, minutes, and seconds, north or south from the equator.
Type: an, Max Length: 10 -
6002 – To specify the value of longitude i.e. the angular distance east or west on the earth's surface, measured by the angle and expressed in degrees, minutes, and seconds, which the meridian passing through a particular place makes with a standard or prime meridian.
Type: an, Max Length: 11 -
6096 – The height of an object above sea level.
Type: n, Max Length: 18
Group SG33 (Max 99)
LOC To identify a place or a location and/or related locations. (Max 1) Required
Elements and codes as defined at LOC above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG34 (Max 99)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
NAT To specify a nationality. (Max 1)
-
C042 – To specify a nationality.
-
3293 – Code specifying the name of a nationality.
Type: an, Max Length: 3 -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
3292 – Name of a nationality.
Type: a, Max Length: 35
-
3293 – Code specifying the name of a nationality.
-
3493 – Code qualifying a nationality.
Type: an, Max Length: 3 (Required)Valid Codes:1– The nationality assigned the individual at birth.2– Current nationality.3– Nationality of a person before the current nationality.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
LOC To identify a place or a location and/or related locations. (Max 99)
Elements and codes as defined at LOC above.
EMP To specify employment details. (Max 99)
-
C948 – Code and/or description of an employment category.
-
9005 – Code specifying the employment category.
Type: an, Max Length: 3 -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
9004 – Free form description of the employment category.
Type: an, Max Length: 35
-
9005 – Code specifying the employment category.
-
C951 – Description of an occupation.
-
9009 – Code specifying an occupation.
Type: an, Max Length: 3 -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
9008 – Free form description of an occupation.
Type: an, Max Length: 35 -
9008 – Free form description of an occupation.
Type: an, Max Length: 35
-
9009 – Code specifying an occupation.
-
C950 – Qualification classification description and/or code. This specifies the trade, skill, professional or similar qualification category.
-
9007 – Code specifying a qualification classification.
Type: an, Max Length: 3 -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
9006 – Free form description of a qualification classification.
Type: an, Max Length: 35 -
9006 – Free form description of a qualification classification.
Type: an, Max Length: 35
-
9007 – Code specifying a qualification classification.
-
9003 – Code qualifying the employment details.
Type: an, Max Length: 3 (Required)Valid Codes:1– Main employment.2– Secondary employment.3– Tertiary employment.4– To specify a profession.
-
3480 – Name of a job title such as rank or rating of crew member.
Type: an, Max Length: 35 -
9035 – Code specifying the application area of a qualification.
Type: an, Max Length: 3Valid Codes:1– Public administration sector.2– Agricultural sector.3– Automotive sector.4– Transport sector.5– Finance sector.6– Tourism sector.7– Construction sector.
Group SG35 (Max 99)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 99)
Elements and codes as defined at COM above.
Group SG36 (Max 1)
ADR To specify an address. (Max 1) Required
-
C817 – To describe the usage of an address.
-
3299 – Code specifying the purpose of an address.
Type: an, Max Length: 3Valid Codes:1– The address is the home address.2– Address where contact may be made.3– Address of arrival.4– Address of departure.5– Address where a person works.6– Address where medical care is provided.7– Address where samples are collected.8– Address from where a patient is admitted.9– The address where a visit takes place.10– Address to where a patient is discharged.
-
3131 – Code specifying the type of an address.
Type: an, Max Length: 3Valid Codes:1– The address is representing a postal address.2– Identification of an address as required by fiscal administrations.3– The address represents an actual physical location.
-
3475 – Code specifying the status of an address.
Type: an, Max Length: 3Valid Codes:1– The address is the permanent address.2– Current address.4– The previous address.5– A former address.6– An address temporarily used.
-
3299 – Code specifying the purpose of an address.
-
C090 – To specify the details of an address.
-
3477 – Code specifying the format of an address.
Type: an, Max Length: 3 (Required)Valid Codes:1– Address street name followed by address number.2– House number followed by type of road and name of the road.3– Type of the road followed by name of the road and the house number.4– Post office box.5– Unstructured address, comprising an unspecified mix of components.6– Identifies the address component as street name followed by number, building, and suite in this sequence.7– Identifies the address component as the rural route number.8– Identifies the address component as the post office drawer.9– Identifies the address component as building followed by suite.
-
3286 – Free form description of the component of an address.
Type: an, Max Length: 70 (Required) -
3286 – Free form description of the component of an address.
Type: an, Max Length: 70 -
3286 – Free form description of the component of an address.
Type: an, Max Length: 70 -
3286 – Free form description of the component of an address.
Type: an, Max Length: 70 -
3286 – Free form description of the component of an address.
Type: an, Max Length: 70
-
3477 – Code specifying the format of an address.
-
C819 – To specify a country subdivision, such as state, canton, county, prefecture.
-
3229 – To identify a country subdivision, such as state, canton, county, prefecture.
Type: an, Max Length: 9 -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
3228 – Name of a country subdivision, such as state, canton, county, prefecture.
Type: an, Max Length: 70
-
3229 – To identify a country subdivision, such as state, canton, county, prefecture.
-
C517 – Identification of a location by code or name.
-
3225 – To identify a location.
Type: an, Max Length: 35 -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
3224 – Name of the location.
Type: an, Max Length: 256
-
3225 – To identify a location.
-
3164 – Name of a city.
Type: an, Max Length: 35 -
3251 – Code specifying the postal zone or address.
Type: an, Max Length: 17 -
3207 – Identification of the name of the country or other geographical entity as defined in ISO 3166-1 and UN/ECE Recommendation 3.
Type: an, Max Length: 3
EMP To specify employment details. (Max 1)
Elements and codes as defined at EMP above.
Group SG37 (Max 9999)
EQD To identify a unit of equipment. (Max 1) Required
-
C237 – Marks (letters/numbers) identifying equipment.
-
8260 – To identify equipment.
Type: an, Max Length: 17 -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
3207 – Identification of the name of the country or other geographical entity as defined in ISO 3166-1 and UN/ECE Recommendation 3.
Type: an, Max Length: 3
-
8260 – To identify equipment.
-
C224 – Code and or name identifying size and type of equipment. Code preferred.
-
8155 – Code specifying the size and type of equipment.
Type: an, Max Length: 10Valid Codes:1– A tank coated with dime.2– A tank coated with epoxy.6– A tank capable of holding pressurized goods.7– A tank capable of keeping goods refrigerated.9– A tank made of stainless steel.10– A 40 foot refrigerated container that is not actively controlling temperature of the product.12– 80 x 120 cm.13– 100 x 120 cm.14– Non self-propelled vehicle designed for the carriage of cargo so that it can be towed by a motor vehicle.15– A 20 foot refrigerated container that is not actively controlling temperature of the product.16– Standard pallet exchangeable following international convention.17– Non self propelled vehicle without front wheels designed for the carriage of cargo and provided with a kingpin.18– A tank container with a length of 20 feet.19– A tank container with a length of 30 feet.20– A tank container with a length of 40 feet.21– A container owned by InterContainer, a European railway subsidiary, with a length of 20 feet.22– A container owned by InterContainer, a European railway subsidiary, with a length of 30 feet.23– A container owned by InterContainer, a European railway subsidiary, with a length of 40 feet.24– A refrigerated tank with a length of 20 feet.25– A refrigerated tank with a length of 30 feet.
Showing 20 of 40 values defined for element 8155 in D09B.
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
8154 – Free form description of the size and type of equipment.
Type: an, Max Length: 35
-
8155 – Code specifying the size and type of equipment.
-
8053 – Code qualifying a type of equipment.
Type: an, Max Length: 3 (Required)Valid Codes:AA– Ground equipment being fuelled or serviced.AB– Chain used in the securing of cargo.AD– Temperature recorder to provide a record of the actual temperature.AE– The part of the vehicle where the cargo is loaded.AG– A cardboard platform used for holding product for storage or transportation.AH– A code to indicate that there is no special equipment needed.AI– A compartment forming part of a transport vessel.AJ– Type of open container used for carrying objects.AK– To indicate that the equipment is an aircraft.AL– A device used for medical purposes.AM– A refrigerated (reefer) container that is actively cooling the product.AN– A pallet with standard dimensions 80*120 centimetres made of synthetic material.AO– A standard pallet with standard dimensions 100*120 centimetres made of synthetic material.AP– Equipment used to store and transport clothing in a hanging position.AQ– Trailer designated for combined road/rail use.AT– Empty rail wagon added to the loaded wagons, when goods are longer than the loaded wagon.BL– A piece of equipment that is normally a piece of wood to fix cargo (e.g. coils) during transport.BPN– A box pallet which cannot be exchanged.BPO– A road vehicle capable of carrying goods which is being carried on another means of transport.BPP– A road vehicle capable of carrying goods with an attached trailer which is being carried on another means of transport.
Showing 20 of 63 values defined for element 8053 in D09B.
-
8077 – Code specifying the party that is the supplier of the equipment.
Type: an, Max Length: 3Valid Codes:1– The transport equipment is supplied by the shipper.2– The transport equipment is supplied by the carrier.3– The equipment is supplied by the consolidator.4– The equipment is supplied by the deconsolidator.5– The equipment is supplied by a third party.6– The equipment is supplied by the forwarder and is taken from a leasing company.7– The equipment is supplied by the forwarder and is taken from a pool established by railway companies.
-
8249 – Code specifying the status of equipment.
Type: an, Max Length: 3Valid Codes:1– The equipment is or will be moving across a continent on an intermodal or multimodal basis.2– Transport equipment to be exported on a marine vessel.3– Transport equipment to be imported on a marine vessel.4– Transport equipment arriving on a marine vessel is to remain on board.5– Transport equipment is to be shifted from one stowage location on a marine vessel to another on the same vessel.6– Transport equipment is to be transferred from one marine vessel to another.7– Transport equipment notified to arrive which did not arrive on the means of transport.8– Transport equipment not notified to arrive but which did arrive on the means of transport.9– Transport equipment is used in domestic service.10– Equipment is being transported for positioning purposes.11– Equipment is being delivered.12– Equipment is being redelivered.13– The equipment is for repair.14– Transport equipment to be discharged and subsequently reloaded on the same means of transport but in a different stowage location.15– The equipment is returned.16– The equipment is dropped off.17– The transport equipment that is unloaded will be loaded in another vessel at another terminal in the same port.18– Notification of the confirmation of booking of a transport equipment.19– Notification that a transport equipment has undergone a terminal gate inspection.20– Notification that a transport equipment arrived at the offloading location.
Showing 20 of 29 values defined for element 8249 in D09B.
-
8169 – Code indicating whether an object is full or empty.
Type: an, Max Length: 3Valid Codes:1– Indicates that there is more than a quarter of the volume available.2– Indicates that there is more than a half of the volume available.3– Indicates that there is more than three quarters of the volume available.4– Indicates that the object is empty.5– Indicates that the object is full.6– Indicates that there is no space available in the object.7– Indicates that the equipment is fully loaded, and includes a number LCL (Less Than Container Load) consignments.8– Indicates that the container is fully loaded with a single FCL (Full Container Load) consignment.9– Container represents part of a consignment declared on a single Customs declaration (i.e. the Customs declaration covers more than one container).10– Container represents part of the consignment declared on a single Customs declaration with the remainder being in other containers. Other goods, related to other declarations, are also in the container.11– Merchandise within a container/package covered by a single invoice.12– Merchandise within a container/package covered by more than one invoice.13– A container representing a consignment of goods for one consignee with multiple bill of lading numbers.
-
4233 – Code specifying instructions for marking.
Type: an, Max Length: 3Valid Codes:1– Packaging should not be marked with supplier's company name.2– Packaging should be marked with customer's company name.3– Packaging should be marked with customer's references.4– Packaging should also be marked with customer's article description.5– Packaging should be marked with customer's article description only.6– Packaging should be marked with package's dimensions.7– Packaging should be marked with net weight.8– Packaging should be marked with gross weight.9– Packaging should be marked with tare weight.10– Packaging should be marked with batch number.11– Packaging should be marked with customer's article number.12– Packaging should be marked with the running number of packages.13– Packaging should be marked with the date of production.14– Packaging should be marked with the expiry date.15– Packaging should be marked with the supplier number.16– Markings as specified by the buyer.17– Markings as specified by the seller.18– Markings as specified by carrier.19– Markings as specified by law.20– Markings as specified by industry.
Showing 20 of 35 values defined for element 4233 in D09B.
SEQ To provide details relating to the sequence. (Max 1) Required
-
C286 – Identification of a sequence and source for sequencing.
-
1050 – To identify a position in a sequence.
Type: an, Max Length: 10 (Required) -
1159 – Code specifying the source of a sequence identifier.
Type: an, Max Length: 3Valid Codes:1– Report from workstation 1.2– Report from workstation 2.3– The manufacturer's plant requesting the delivery of the item has allocated the sequence number.4– The plant requesting the delivery of an item assigns a number indicating the sequence of the finished article.5– The positional sequence when transmitted.6– The positional sequence in a message structure as published in a particular UN directory.
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
1050 – To identify a position in a sequence.
-
1229 – Code specifying the action to be taken or already taken.
Type: an, Max Length: 3Valid Codes:1– The information is to be or has been added.2– The information is to be or has been deleted.3– The information is to be or has been changed.4– This line item is not affected by the actual message.5– This line item is entirely accepted by the seller.6– This line item is accepted but amended by the seller.7– This line item is not accepted by the seller.8– Code specifying that the message is a schedule only.9– Code specifying that amendments are requested/notified.10– This line item is not found in the referenced message.11– This line is not amended by the buyer.12– Code specifying that the line item numbers have changed.13– Buyer has deducted amount from payment.14– Buyer has a claim against an outstanding invoice.15– Factor has been requested to charge back the outstanding item.16– Seller agrees to issue a credit note.17– New settlement terms have been agreed.18– Factor agrees to abide by the outcome of negotiations between seller and buyer.19– Seller does not accept validity of dispute.20– The reported situation is settled.
Showing 20 of 115 values defined for element 1229 in D09B.
GEI To identify processing information. (Max 99)
Elements and codes as defined at GEI above.
SEL To specify the seal number or a range of seal numbers. (Max 99)
-
C215 – Identification of the issuer of a seal on equipment either by code or by name.
-
9303 – Code specifying the name of the sealing party.
Type: an, Max Length: 3Valid Codes:AA– Party which consolidates cargo.AB– The sealing party is unknown.AC– Agency responsible for the administration of statutory disease controls on the movement of people, animals and plants.CA– Party undertaking or arranging transport of goods between named points.CU– 'Customs' means the Government Service which is responsible for the administration of Customs law and the collection of duties and taxes and which also has the responsibility for the application of other laws and regulations relating to the importation, exportation, movement or storage of goods.SH– Party which, by contract with a carrier, consigns or sends goods with the carrier, or has them conveyed by him.TO– Party which handles the loading and unloading of marine vessels.
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
9302 – Name of the sealing party.
Type: an, Max Length: 35
-
9303 – Code specifying the name of the sealing party.
-
C208 – Goods item identification numbers, start and end of consecutively numbered range.
-
7402 – Code specifying the unique identity of an object.
Type: an, Max Length: 35 (Required) -
7402 – Code specifying the unique identity of an object.
Type: an, Max Length: 35
-
7402 – Code specifying the unique identity of an object.
-
9308 – The identification number of a seal affixed to a transport unit.
Type: an, Max Length: 35 -
4517 – Code specifying the condition of a seal.
Type: an, Max Length: 3Valid Codes:1– The seal is in right condition.2– The seal is damaged.3– A seal that is missing.4– Used to specify that the seal is broken.5– The electronic seal is faulty.
-
4525 – To specify a type of seal.
Type: an, Max Length: 3Valid Codes:1– The seal is mechanical.2– The seal is electronic.
Group SG38 (Max 9)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG39 (Max 99)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 99)
Elements and codes as defined at COM above.
UNS Unknown Segment (Max 1) Required
Group SG41 (Max 9999)
SEQ To provide details relating to the sequence. (Max 1) Required
Elements and codes as defined at SEQ above.
ALI To indicate that special conditions due to the origin, customs preference, fiscal or commercial factors are applicable. (Max 99)
Elements and codes as defined at ALI above.
IFD To specify details about items of information. (Max 99)
Elements and codes as defined at IFD above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
RFF To specify a reference. (Max 99)
Elements and codes as defined at RFF above.
Group SG42 (Max 99)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG43 (Max 99)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 99)
Elements and codes as defined at COM above.
Group SG44 (Max 99)
LOC To identify a place or a location and/or related locations. (Max 1) Required
Elements and codes as defined at LOC above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG45 (Max 999)
DOC To identify documents and details directly related to it. (Max 1) Required
Elements and codes as defined at DOC above.
SEQ To provide details relating to the sequence. (Max 1) Required
Elements and codes as defined at SEQ above.
RFF To specify a reference. (Max 99)
Elements and codes as defined at RFF above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
MOA To specify a monetary amount. (Max 99)
Elements and codes as defined at MOA above.
ALI To indicate that special conditions due to the origin, customs preference, fiscal or commercial factors are applicable. (Max 1)
Elements and codes as defined at ALI above.
QTY To specify a pertinent quantity. (Max 99)
Elements and codes as defined at QTY above.
TSR To specify the contract and carriage conditions and service and priority requirements for the transport. (Max 99)
Elements and codes as defined at TSR above.
Group SG46 (Max 9)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
Group SG47 (Max 99)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 99)
Elements and codes as defined at COM above.
Group SG49 (Max 99)
GEI To identify processing information. (Max 1) Required
Elements and codes as defined at GEI above.
MOA To specify a monetary amount. (Max 99)
Elements and codes as defined at MOA above.
PYT To specify the terms of payment. (Max 99)
Elements and codes as defined at PYT above.
Group SG51 (Max 99)
RCS To specify sector/subject requirements and conditions. (Max 1) Required
Elements and codes as defined at RCS above.
FTX To provide free form or coded text information. (Max 9)
Elements and codes as defined at FTX above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
GEI To identify processing information. (Max 99)
Elements and codes as defined at GEI above.
ALI To indicate that special conditions due to the origin, customs preference, fiscal or commercial factors are applicable. (Max 99)
Elements and codes as defined at ALI above.
Group SG53 (Max 1)
INP To specify parties to an instruction, the instruction, or both. (Max 1) Required
Elements and codes as defined at INP above.
DTM To specify date, and/or time, or period. (Max 9)
Elements and codes as defined at DTM above.
LOC To identify a place or a location and/or related locations. (Max 99)
Elements and codes as defined at LOC above.
Group SG54 (Max 1)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG55 (Max 99)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 99)
Elements and codes as defined at COM above.
Group SG56 (Max 99)
TAX To specify relevant duty/tax/fee information. (Max 1) Required
Elements and codes as defined at TAX above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
ALI To indicate that special conditions due to the origin, customs preference, fiscal or commercial factors are applicable. (Max 99)
Elements and codes as defined at ALI above.
MOA To specify a monetary amount. (Max 99)
Elements and codes as defined at MOA above.
QTY To specify a pertinent quantity. (Max 99)
Elements and codes as defined at QTY above.
Group SG57 (Max 9)
PAI To specify the instructions for payment. (Max 1) Required
Elements and codes as defined at PAI above.
RFF To specify a reference. (Max 99)
Elements and codes as defined at RFF above.
MOA To specify a monetary amount. (Max 99)
Elements and codes as defined at MOA above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG58 (Max 9)
GIR To specify a related set of identification numbers. (Max 1) Required
Elements and codes as defined at GIR above.
LOC To identify a place or a location and/or related locations. (Max 99)
Elements and codes as defined at LOC above.
VLI To identify a coded or non coded value list. (Max 1)
Elements and codes as defined at VLI above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG59 (Max 1)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG60 (Max 99)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 99)
Elements and codes as defined at COM above.
Group SG61 (Max 9)
GOR To indicate the requirement for a specific governmental action and/or procedure or which specific procedure is valid for a specific part of the transport and cross-border transactions. (Max 1) Required
Elements and codes as defined at GOR above.
LOC To identify a place or a location and/or related locations. (Max 1)
Elements and codes as defined at LOC above.
Group SG62 (Max 9)
MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 1) Required
Elements and codes as defined at MEA above.
QTY To specify a pertinent quantity. (Max 99)
Elements and codes as defined at QTY above.
Group SG63 (Max 9)
STS To specify the status of an object or service, including its category and the reason(s) for the status. (Max 1) Required
Elements and codes as defined at STS above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG65 (Max 9)
TMP To specify the temperature setting. (Max 1) Required
Elements and codes as defined at TMP above.
MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 99)
Elements and codes as defined at MEA above.
DGS To identify dangerous goods. (Max 99)
Elements and codes as defined at DGS above.
Group SG66 (Max 1)
TOD To specify terms of delivery or transport. (Max 1) Required
-
C100 – Terms of delivery or transport code from a specified source.
-
4053 – Code specifying the delivery or transport terms.
Type: an, Max Length: 3Valid Codes:1– Indicates that the supplier will arrange delivery of the goods.2– Code indicating that the logistic service provider has arranged the delivery of goods.
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
4052 – Free form description of delivery or transport terms.
Type: an, Max Length: 70 -
4052 – Free form description of delivery or transport terms.
Type: an, Max Length: 70
-
4053 – Code specifying the delivery or transport terms.
-
4055 – Code specifying the function of delivery or transport terms.
Type: an, Max Length: 3Valid Codes:1– Specifies a condition related to the price which a seller must fulfil before the buyer will complete a purchase.2– Condition requested by the customer under which the supplier shall deliver: Extent of freight costs, means of transport.3– Condition related to price and despatch that the seller must complete before the customer will agree payment.4– Indicates that the customer will pick up the goods at the supplier. He will take care of the means of transport.5– Specifies the conditions under which the transport takes place under the responsibility of the carrier.6– Specifies the conditions under which the goods must be delivered to the consignee.
-
4215 – Code specifying the payment method for transport charges.
Type: an, Max Length: 3Valid Codes:A– The charges are to be charged to an account.AA– An indication that the consignor is responsible for the payment of the cash on delivery service charge.AB– An indication that the consignee is responsible for the payment of the cash on delivery service charge.AC– An indication that the consignor is responsible for the payment of the insurance costs.AD– An indication that the consignee is responsible for the payment of the insurance costs.CA– The amount of freight or other charge on a shipment advanced by one transportation line to another or to the shipper, to be collected from consignee.CC– A shipment on which freight charges will be paid by consignee.CF– The freight is collect but has been paid by the shipper and will be credited to that party.DF– The payment method for transport charges have been defined by the buyer and seller.FO– Title and control of goods pass to the buyer at port of call. Responsibility for export taxes and cost of documents for overseas shipments have not been specified.IC– Transaction set has been provided for information only.MX– The consignment is partially collect and partially prepaid.NC– The consignment is shipped on a service basis and there is no freight charge.NS– The payment method for transport charges have not been specified.PA– Costs have been paid in advance.PB– Buyer's private carriage picks up the goods as a return load to the buyer's facility.PC– shipping charges have been paid in advance of shipment but are charged back to consignee usually as line item on invoice for the purchased goods.PE– Place of payment not known at the begin of conveyance.PO– Payment in advance of freight and/or other charges prior to delivery of shipment at destination, usually by shipper at point of origin.PP– Seller of goods makes payment to carrier for freight charges prior to shipment.
Showing 20 of 29 values defined for element 4215 in D09B.
LOC To identify a place or a location and/or related locations. (Max 99)
Elements and codes as defined at LOC above.
GEI To identify processing information. (Max 99)
Elements and codes as defined at GEI above.
Group SG67 (Max 9999)
CNI To identify one consignment. (Max 1) Required
-
C503 – Identification of document/message by number, status, source and/or language.
-
1004 – To identify a document.
Type: an, Max Length: 70 -
1373 – Code specifying the status of a document.
Type: an, Max Length: 3Valid Codes:1– The specified document is accepted.2– Notice that a specific document will be accompanying the goods.3– The specified document is conditionally accepted.4– Notice that a specific document/message will be transmitted via a separate EDI message.5– Notice that the specific document or message is for information only.6– Notice that a specific document or message will not be sent via EDI.7– Request for a specific message to be formatted and transmitted or a request for a specific document to be raised and sent.8– The specified document is rejected.9– The document or message is to be printed.10– Specific document is currently valid.11– Specified document is not available.12– Customs declaration to which the document is related completed or exhaust the allowance stated on the document. The document is attached to the Customs declaration.13– Customs declaration to which the document is related does not complete or exhaust the allowance stated on the document . The document is not attached to the declaration but has already been lodged in the Customs station.14– Customs declaration to which the document is related completed or exhaust the allowance stated on the document. The usage of the document is complete. The document is not attached to the declaration but has already been lodged in the Customs station.15– Customs declaration to which the document is related does not complete or exhaust the allowance stated on the document. The document can continue to be used for future declarations until the allowance is exhausted. The document is not attached to the declaration but has already been lodged in the Customs station.16– Specified document is not or cannot be attached.17– Document not attached to the Customs declaration but is attached to the goods.18– Specified document is attached to the Customs declaration and will be required to be returned to the declarant after Customs endorsement.19– Application has been submitted for that document.20– Indicates that the document has legal validity from the date of receival of the cargo.
Showing 20 of 37 values defined for element 1373 in D09B.
-
1366 – Free form description of the source of a document.
Type: an, Max Length: 70 -
3453 – Code specifying the language name.
Type: an, Max Length: 3 -
1056 – To identify a version.
Type: an, Max Length: 9 -
1060 – To identify a revision.
Type: an, Max Length: 6
-
1004 – To identify a document.
-
1490 – To specify a consignment within a consolidation.
Type: n, Max Length: 5 -
1312 – To identify the loading sequence of a consignment or consignments.
Type: n, Max Length: 4
RFF To specify a reference. (Max 99)
Elements and codes as defined at RFF above.
GEI To identify processing information. (Max 99)
Elements and codes as defined at GEI above.
STS To specify the status of an object or service, including its category and the reason(s) for the status. (Max 99)
Elements and codes as defined at STS above.
CNT To provide control total. (Max 1)
-
C270 – Control total for checking integrity of a message or part of a message.
-
6069 – Code qualifying the type of control of hash total.
Type: an, Max Length: 3 (Required)Valid Codes:1– Algebraic total of the quantity values in line items in a message.2– Total number of line items in the message.3– Total number of line and sub items in the message.4– Number of lines on an invoice.5– Total number of occurrences of the Customs item detail section within a single Customs declaration message.6– Number of entries which are subject to the same Customs procedures, and have the same tariff or statistical heading, country and duty regime.7– Code to indicate total gross weight of a consignment.8– Total number of pieces.9– The total number of Unit Load Devices mentioned in the message.10– The total number of consignments.11– [7370] Count of total number of packages referred to as one consignment.12– [5214] Amount, debited by the seller and being the total of related article item amounts in a commercial invoice.13– [1166] The number of loading lists, manifests or similar documents.14– Commercial detail section within a single Customs declaration message.15– The total cube of consignment.16– (8046) Total number of equipment mentioned in the message.17– [5070] Total value declared for Customs purposes of all goods in a consignment, whether or not they are subject to the same Customs procedure, or have the same tariff/statistical heading, country information, and duty regime.18– Total reported quantity in net weight.19– Total reported quantity in supplementary units.20– Hash total of the total monetary amounts reported on the invoices.
Showing 20 of 61 values defined for element 6069 in D09B.
-
6066 – To specify the value of a control quantity.
Type: n, Max Length: 18 (Required) -
6411 – Code specifying the unit of measurement.
Type: an, Max Length: 8
-
6069 – Code qualifying the type of control of hash total.
QTY To specify a pertinent quantity. (Max 99)
Elements and codes as defined at QTY above.
MOA To specify a monetary amount. (Max 99)
Elements and codes as defined at MOA above.
IFD To specify details about items of information. (Max 99)
Elements and codes as defined at IFD above.
Group SG68 (Max 99)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG69 (Max 99)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 99)
Elements and codes as defined at COM above.
Group SG70 (Max 99)
LOC To identify a place or a location and/or related locations. (Max 1) Required
Elements and codes as defined at LOC above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG72 (Max 99)
DOC To identify documents and details directly related to it. (Max 1) Required
Elements and codes as defined at DOC above.
RFF To specify a reference. (Max 99)
Elements and codes as defined at RFF above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
MOA To specify a monetary amount. (Max 99)
Elements and codes as defined at MOA above.
ALI To indicate that special conditions due to the origin, customs preference, fiscal or commercial factors are applicable. (Max 1)
Elements and codes as defined at ALI above.
QTY To specify a pertinent quantity. (Max 99)
Elements and codes as defined at QTY above.
TSR To specify the contract and carriage conditions and service and priority requirements for the transport. (Max 99)
Elements and codes as defined at TSR above.
Group SG73 (Max 9)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
Group SG74 (Max 99)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 99)
Elements and codes as defined at COM above.
Group SG76 (Max 99)
RCS To specify sector/subject requirements and conditions. (Max 1) Required
Elements and codes as defined at RCS above.
FTX To provide free form or coded text information. (Max 9)
Elements and codes as defined at FTX above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
GEI To identify processing information. (Max 99)
Elements and codes as defined at GEI above.
ALI To indicate that special conditions due to the origin, customs preference, fiscal or commercial factors are applicable. (Max 99)
Elements and codes as defined at ALI above.
Group SG78 (Max 1)
INP To specify parties to an instruction, the instruction, or both. (Max 1) Required
Elements and codes as defined at INP above.
DTM To specify date, and/or time, or period. (Max 9)
Elements and codes as defined at DTM above.
LOC To identify a place or a location and/or related locations. (Max 99)
Elements and codes as defined at LOC above.
Group SG79 (Max 1)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG80 (Max 99)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 99)
Elements and codes as defined at COM above.
Group SG81 (Max 99)
PAC To describe the number and type of packages/physical units. (Max 1) Required
Elements and codes as defined at PAC above.
PCI To specify markings and labels on individual packages or physical units. (Max 99)
Elements and codes as defined at PCI above.
FTX To provide free form or coded text information. (Max 99)
Elements and codes as defined at FTX above.
GEI To identify processing information. (Max 99)
Elements and codes as defined at GEI above.
DIM To specify dimensions. (Max 99)
Elements and codes as defined at DIM above.
MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 99)
Elements and codes as defined at MEA above.
Group SG82 (Max 99)
TMP To specify the temperature setting. (Max 1) Required
Elements and codes as defined at TMP above.
MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 99)
Elements and codes as defined at MEA above.
DGS To identify dangerous goods. (Max 99)
Elements and codes as defined at DGS above.
Group SG83 (Max 99)
EQD To identify a unit of equipment. (Max 1) Required
Elements and codes as defined at EQD above.
SEQ To provide details relating to the sequence. (Max 1) Required
Elements and codes as defined at SEQ above.
GEI To identify processing information. (Max 99)
Elements and codes as defined at GEI above.
SEL To specify the seal number or a range of seal numbers. (Max 99)
Elements and codes as defined at SEL above.
Group SG84 (Max 99)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG85 (Max 99)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 99)
Elements and codes as defined at COM above.
Group SG86 (Max 99)
TDT To specify information regarding the transport such as mode of transport, means of transport, its conveyance reference number and the identification of the means of transport. (Max 1) Required
Elements and codes as defined at TDT above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
RFF To specify a reference. (Max 99)
Elements and codes as defined at RFF above.
QTY To specify a pertinent quantity. (Max 99)
Elements and codes as defined at QTY above.
MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 99)
Elements and codes as defined at MEA above.
MOA To specify a monetary amount. (Max 99)
Elements and codes as defined at MOA above.
POC To specify the purpose of the call of the conveyance. (Max 99)
Elements and codes as defined at POC above.
DIM To specify dimensions. (Max 99)
Elements and codes as defined at DIM above.
FTX To provide free form or coded text information. (Max 99)
Elements and codes as defined at FTX above.
GDS To indicate the type of cargo as a general classification. (Max 99)
Elements and codes as defined at GDS above.
STS To specify the status of an object or service, including its category and the reason(s) for the status. (Max 1)
Elements and codes as defined at STS above.
GPO To specify a geographical position. (Max 1)
Elements and codes as defined at GPO above.
Group SG87 (Max 99)
LOC To identify a place or a location and/or related locations. (Max 1) Required
Elements and codes as defined at LOC above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG88 (Max 99)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
NAT To specify a nationality. (Max 1)
Elements and codes as defined at NAT above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG89 (Max 99)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 99)
Elements and codes as defined at COM above.
Group SG90 (Max 99)
EQD To identify a unit of equipment. (Max 1) Required
Elements and codes as defined at EQD above.
SEQ To provide details relating to the sequence. (Max 1) Required
Elements and codes as defined at SEQ above.
GEI To identify processing information. (Max 99)
Elements and codes as defined at GEI above.
SEL To specify the seal number or a range of seal numbers. (Max 99)
Elements and codes as defined at SEL above.
Group SG91 (Max 9)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG92 (Max 99)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 99)
Elements and codes as defined at COM above.
Group SG93 (Max 9999)
LIN To identify a line item and configuration. (Max 1) Required
-
C212 – Goods identification for a specified source.
-
7140 – To identify an item.
Type: an, Max Length: 35 -
7143 – Coded identification of an item type.
Type: an, Max Length: 3Valid Codes:AA– Number assigned by manufacturer or seller to identify the release of a product.AB– The item number is that of an assembly.AC– Article identifier used within health sector to indicate data used conforms to HIBC.AD– Number assigned to a cold roll.AE– Number assigned to a hot roll.AF– Number assigned to a slab, which is produced in a particular production step.AG– A number assigned to indicate a revision of software.AH– An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.AI– A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.AJ– Number assigned to a sample.AK– Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).AL– A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.AM– A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.AN– A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.AO– A code which specifies the codification of the state's labelling requirements.AP– Number assigned to the heat (also known as the iron charge) for the production of steel products.AQ– A number identifying a coupon.AR– A number to identify a resource.AS– A number to identify a work task.AT– Identification number on a product allowing a quick electronic retrieval of price information for that product.
Showing 20 of 164 values defined for element 7143 in D09B.
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
7140 – To identify an item.
-
C829 – To provide an indication that a segment or segment group is used to contain sub-line or sub-line item information and to optionally enable the sub-line to be identified.
-
1082 – To identify a line item.
Type: an, Max Length: 6
-
1082 – To identify a line item.
-
1082 – To identify a line item.
Type: an, Max Length: 6 -
1229 – Code specifying the action to be taken or already taken.
Type: an, Max Length: 3Valid Codes:1– The information is to be or has been added.2– The information is to be or has been deleted.3– The information is to be or has been changed.4– This line item is not affected by the actual message.5– This line item is entirely accepted by the seller.6– This line item is accepted but amended by the seller.7– This line item is not accepted by the seller.8– Code specifying that the message is a schedule only.9– Code specifying that amendments are requested/notified.10– This line item is not found in the referenced message.11– This line is not amended by the buyer.12– Code specifying that the line item numbers have changed.13– Buyer has deducted amount from payment.14– Buyer has a claim against an outstanding invoice.15– Factor has been requested to charge back the outstanding item.16– Seller agrees to issue a credit note.17– New settlement terms have been agreed.18– Factor agrees to abide by the outcome of negotiations between seller and buyer.19– Seller does not accept validity of dispute.20– The reported situation is settled.
Showing 20 of 115 values defined for element 1229 in D09B.
-
1222 – To specify a level within a configuration.
Type: n, Max Length: 2 -
7083 – Code specifying the configuration operation.
Type: an, Max Length: 3Valid Codes:A– The operation is to add to the configuration.D– The operation is to delete from the configuration.I– The item is a part of the configuration.
MOA To specify a monetary amount. (Max 99)
Elements and codes as defined at MOA above.
IFD To specify details about items of information. (Max 99)
Elements and codes as defined at IFD above.
Group SG94 (Max 99)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG95 (Max 99)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 99)
Elements and codes as defined at COM above.
Group SG96 (Max 99)
LOC To identify a place or a location and/or related locations. (Max 1) Required
Elements and codes as defined at LOC above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG97 (Max 99)
DOC To identify documents and details directly related to it. (Max 1) Required
Elements and codes as defined at DOC above.
RFF To specify a reference. (Max 99)
Elements and codes as defined at RFF above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
MOA To specify a monetary amount. (Max 99)
Elements and codes as defined at MOA above.
ALI To indicate that special conditions due to the origin, customs preference, fiscal or commercial factors are applicable. (Max 1)
Elements and codes as defined at ALI above.
QTY To specify a pertinent quantity. (Max 99)
Elements and codes as defined at QTY above.
TSR To specify the contract and carriage conditions and service and priority requirements for the transport. (Max 99)
Elements and codes as defined at TSR above.
Group SG98 (Max 99)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
Group SG99 (Max 99)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 99)
Elements and codes as defined at COM above.
Group SG101 (Max 99)
RCS To specify sector/subject requirements and conditions. (Max 1) Required
Elements and codes as defined at RCS above.
FTX To provide free form or coded text information. (Max 9)
Elements and codes as defined at FTX above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
GEI To identify processing information. (Max 99)
Elements and codes as defined at GEI above.
ALI To indicate that special conditions due to the origin, customs preference, fiscal or commercial factors are applicable. (Max 99)
Elements and codes as defined at ALI above.
Group SG103 (Max 1)
INP To specify parties to an instruction, the instruction, or both. (Max 1) Required
Elements and codes as defined at INP above.
DTM To specify date, and/or time, or period. (Max 9)
Elements and codes as defined at DTM above.
LOC To identify a place or a location and/or related locations. (Max 99)
Elements and codes as defined at LOC above.
Group SG104 (Max 1)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG105 (Max 99)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 99)
Elements and codes as defined at COM above.
Group SG106 (Max 99)
MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 1) Required
Elements and codes as defined at MEA above.
QTY To specify a pertinent quantity. (Max 99)
Elements and codes as defined at QTY above.
Group SG107 (Max 999)
PAC To describe the number and type of packages/physical units. (Max 1) Required
Elements and codes as defined at PAC above.
PCI To specify markings and labels on individual packages or physical units. (Max 99)
Elements and codes as defined at PCI above.
FTX To provide free form or coded text information. (Max 99)
Elements and codes as defined at FTX above.
GEI To identify processing information. (Max 99)
Elements and codes as defined at GEI above.
DIM To specify dimensions. (Max 99)
Elements and codes as defined at DIM above.
MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 99)
Elements and codes as defined at MEA above.
Group SG108 (Max 99)
ARD To provide details of the function of a monetary amount. (Max 1) Required
-
C549 – To identify the function of a monetary amount.
-
5007 – Code specifying the monetary amount function.
Type: an, Max Length: 3Valid Codes:1– Code to indicate total charges levied at destination.2– The amount is expressed in alternate currency.3– The total amount of the message.4– The summary of a number of invoices' total amounts.5– Number of monetary units expressed in a specified currency for Customs purposes (see: 5004).7– Amount refers to financial transaction.8– To specify the total(s) of all deferred items from one reinsurance account.9– To specify the total(s) of all open cash claims from one reinsurance account.10– To specify the result(s) of the reinsurance account calculation.11– Totals of prepaid freight and charges.12– Totals of collect freight and charges.14– Code to indicate valuation amounts.15– The amount paid or to be paid before a business transaction occurs.16– The total amount expressed in an alternate currency.17– Value expressed in monetary terms of the documentary credit.18– Freight costs are also covered under the documentary credit.19– Insurance costs are also covered under the documentary credit.20– Interest on delayed or deferred payment is also covered under the documentary credit.21– Goods inspection costs are also covered under the documentary credit.22– Part of documentary credit subject to sight, deferred or acceptance payment when the documentary credit is available by mixed payment.
Showing 20 of 28 values defined for element 5007 in D09B.
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
5006 – Free form description of the monetary amount function.
Type: an, Max Length: 70
-
5007 – Code specifying the monetary amount function.
-
C008 – To provide the detail of a monetary amount function.
-
5105 – Code specifying the detail of a monetary amount function.
Type: an, Max Length: 17 -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
5104 – Free form description of the detail of a monetary amount function.
Type: an, Max Length: 70
-
5105 – Code specifying the detail of a monetary amount function.
MOA To specify a monetary amount. (Max 99)
Elements and codes as defined at MOA above.
GEI To identify processing information. (Max 99)
Elements and codes as defined at GEI above.
PCD To specify percentage information. (Max 99)
-
C501 – Percentage relating to a specified basis.
-
5245 – Code qualifying the type of percentage.
Type: an, Max Length: 3 (Required)Valid Codes:1– (5044) Allowance expressed as a percentage.2– (5044) Charge expressed as a percentage.3– [5044] Specification of any additional charges, dues or deductions, expressed as a percentage.4– To indicate the share of the reinsurer in a treaty.5– To indicate the percentage used for the specified entry (e.g. commission %, deposits % ...).6– (5482) The percentage of specified material in the total product.7– Code specifying the percentage of invoice.8– Percentage to calculate a reduction/surcharge.9– Code specifying the adjustment expressed as a percentage.10– London insurance market bureau (bureau share in reinsurance treaty).11– Anticipated additional consumption to safeguard against unforeseen shortages or demands.12– Discount expressed as a percentage.13– Tolerance of amount in percentage.14– Percentage of debit or credit note.15– Code specifying the penalty percentage.16– Code specifying the interest percentage.17– Part of documentary credit amount in percentage subject to sight payment, deferred payment or acceptance when the documentary credit is available by mixed payment.18– Percentage of a credit note.19– Percentage of a debit note.20– Code specifying the percentage of insurance.
Showing 20 of 161 values defined for element 5245 in D09B.
-
5482 – To specify a percentage.
Type: n, Max Length: 10 -
5249 – Code specifying the basis on which a percentage is calculated.
Type: an, Max Length: 3Valid Codes:1– Referenced percentage applies on a single unit basis.2– Reduction percentage is applied per transported ton.3– Reduction percentage is applied per main equipment unit (for rail purpose, only rail wagons).4– Reduction percentage is applied on the unit price, which is the basis of the charge calculation.5– Reduction percentage applied on the unit price and conceded to a consignor after he reached a specified tonnage of transport.6– Code to indicate that the IATA experimental special charge within Europe is the basis for the percentage reduction or surcharge.7– Code to indicate that the IATA experimental special rate within in Europe is the basis for the percentage reduction or surcharge.8– Code to indicate that the IATA minimum charge is the basis for the percentage reduction or surcharge.9– Code to indicate that the IATA normal rate is the basis for the percentage reduction or surcharge.10– Code to indicate that the IATA quantity rate is the basis for the percentage reduction or surcharge.11– Referenced percentage applies on the amount of drawing under the documentary credit.12– Referenced percentage applies on documentary credit amount.13– Referenced percentage applies on the invoice value.14– Referenced percentage applies on CIF value.15– The percentage applied to the contract cost.16– The percentage applied to the labour hours.17– The percentage basis is London Inter-Bank Offered Rate (LIBOR).18– The percentage basis is Frankfurt Inter-Bank Offered Rate (FIBOR).19– The percentage basis is Paris Inter-Bank Offered Rate (PIBOR).20– The percentage basis is nationally based.
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
5245 – Code qualifying the type of percentage.
-
4405 – Code specifying a status.
Type: an, Max Length: 3Valid Codes:1– Remark that the requested service in the order remains outstanding.2– The instruction has been completed.3– The information has been passed on.4– The amount has the status of finality.5– The amount is subject to finality.6– The amount quoted is a minimum tariff.7– The amount quoted is a fixed tariff.8– The amount quoted is a maximum tariff.9– The amount is quoted for information only, it is not part of the charges to be deducted or added.10– The amount is available today.11– The amount is available on the next banking office day after the booking date.12– The amount is available on the second banking office day after the booking date.13– The amount available on the third banking office day after the booking date.14– Funds not collected by beneficiary.15– The amount or quantity is zero.16– No status or condition has been advised.17– A status or condition has been requested.18– No charge is to be made.19– The quantity has been the subject of a rounding operation.20– Intended to last or function indefinitely.
Showing 20 of 145 values defined for element 4405 in D09B.
Group SG109 (Max 99)
GID To indicate totals of a goods item. (Max 1) Required
-
C213 – Number and type of individual parts of a shipment.
-
7224 – To specify the number of packages.
Type: n, Max Length: 8 -
7065 – Code specifying the type of package.
Type: an, Max Length: 17 -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
7064 – Description of the form in which goods are presented.
Type: an, Max Length: 35 -
7233 – Code specifying information related to packaging.
Type: an, Max Length: 3Valid Codes:1– The ingredients of the product are not marked on the packaging of the product.2– The product price is not marked on the packaging of the product.3– The product best before date is not marked on the packaging of the product.4– Package is not marked as recyclable.5– A code indicating that promotional details have been marked on the package.6– The item is labeled according to the general EAN.UCC specifications for clothing and fashion accessories.7– The package is marked with the last date on which the item may be sold.8– The package is marked with the last date on which the item may be used.9– The package is marked with the date of the packaging or manufacturing of the item.10– Package is not marked with any kind of date indicating freshness, such as use-by, best before or packaging date.31– Package is marked with the product best before date.32– The package is marked recyclable.33– The package is marked returnable.34– The information is related to product marking.35– The information is related to the type of package.36– The information specifies the package.37– The information is related to protection of the package.38– The information describes how coverage with tarpaulins is to be provided.39– The information describes the platform or skid location.40– The information gives the location of the load bearing piece.
Showing 20 of 62 values defined for element 7233 in D09B.
-
7224 – To specify the number of packages.
-
C213 – Number and type of individual parts of a shipment.
-
7224 – To specify the number of packages.
Type: n, Max Length: 8 -
7065 – Code specifying the type of package.
Type: an, Max Length: 17 -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
7064 – Description of the form in which goods are presented.
Type: an, Max Length: 35 -
7233 – Code specifying information related to packaging.
Type: an, Max Length: 3Valid Codes:1– The ingredients of the product are not marked on the packaging of the product.2– The product price is not marked on the packaging of the product.3– The product best before date is not marked on the packaging of the product.4– Package is not marked as recyclable.5– A code indicating that promotional details have been marked on the package.6– The item is labeled according to the general EAN.UCC specifications for clothing and fashion accessories.7– The package is marked with the last date on which the item may be sold.8– The package is marked with the last date on which the item may be used.9– The package is marked with the date of the packaging or manufacturing of the item.10– Package is not marked with any kind of date indicating freshness, such as use-by, best before or packaging date.31– Package is marked with the product best before date.32– The package is marked recyclable.33– The package is marked returnable.34– The information is related to product marking.35– The information is related to the type of package.36– The information specifies the package.37– The information is related to protection of the package.38– The information describes how coverage with tarpaulins is to be provided.39– The information describes the platform or skid location.40– The information gives the location of the load bearing piece.
Showing 20 of 62 values defined for element 7233 in D09B.
-
7224 – To specify the number of packages.
-
C213 – Number and type of individual parts of a shipment.
-
7224 – To specify the number of packages.
Type: n, Max Length: 8 -
7065 – Code specifying the type of package.
Type: an, Max Length: 17 -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
7064 – Description of the form in which goods are presented.
Type: an, Max Length: 35 -
7233 – Code specifying information related to packaging.
Type: an, Max Length: 3Valid Codes:1– The ingredients of the product are not marked on the packaging of the product.2– The product price is not marked on the packaging of the product.3– The product best before date is not marked on the packaging of the product.4– Package is not marked as recyclable.5– A code indicating that promotional details have been marked on the package.6– The item is labeled according to the general EAN.UCC specifications for clothing and fashion accessories.7– The package is marked with the last date on which the item may be sold.8– The package is marked with the last date on which the item may be used.9– The package is marked with the date of the packaging or manufacturing of the item.10– Package is not marked with any kind of date indicating freshness, such as use-by, best before or packaging date.31– Package is marked with the product best before date.32– The package is marked recyclable.33– The package is marked returnable.34– The information is related to product marking.35– The information is related to the type of package.36– The information specifies the package.37– The information is related to protection of the package.38– The information describes how coverage with tarpaulins is to be provided.39– The information describes the platform or skid location.40– The information gives the location of the load bearing piece.
Showing 20 of 62 values defined for element 7233 in D09B.
-
7224 – To specify the number of packages.
-
C213 – Number and type of individual parts of a shipment.
-
7224 – To specify the number of packages.
Type: n, Max Length: 8 -
7065 – Code specifying the type of package.
Type: an, Max Length: 17 -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
7064 – Description of the form in which goods are presented.
Type: an, Max Length: 35 -
7233 – Code specifying information related to packaging.
Type: an, Max Length: 3Valid Codes:1– The ingredients of the product are not marked on the packaging of the product.2– The product price is not marked on the packaging of the product.3– The product best before date is not marked on the packaging of the product.4– Package is not marked as recyclable.5– A code indicating that promotional details have been marked on the package.6– The item is labeled according to the general EAN.UCC specifications for clothing and fashion accessories.7– The package is marked with the last date on which the item may be sold.8– The package is marked with the last date on which the item may be used.9– The package is marked with the date of the packaging or manufacturing of the item.10– Package is not marked with any kind of date indicating freshness, such as use-by, best before or packaging date.31– Package is marked with the product best before date.32– The package is marked recyclable.33– The package is marked returnable.34– The information is related to product marking.35– The information is related to the type of package.36– The information specifies the package.37– The information is related to protection of the package.38– The information describes how coverage with tarpaulins is to be provided.39– The information describes the platform or skid location.40– The information gives the location of the load bearing piece.
Showing 20 of 62 values defined for element 7233 in D09B.
-
7224 – To specify the number of packages.
-
C213 – Number and type of individual parts of a shipment.
-
7224 – To specify the number of packages.
Type: n, Max Length: 8 -
7065 – Code specifying the type of package.
Type: an, Max Length: 17 -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
7064 – Description of the form in which goods are presented.
Type: an, Max Length: 35 -
7233 – Code specifying information related to packaging.
Type: an, Max Length: 3Valid Codes:1– The ingredients of the product are not marked on the packaging of the product.2– The product price is not marked on the packaging of the product.3– The product best before date is not marked on the packaging of the product.4– Package is not marked as recyclable.5– A code indicating that promotional details have been marked on the package.6– The item is labeled according to the general EAN.UCC specifications for clothing and fashion accessories.7– The package is marked with the last date on which the item may be sold.8– The package is marked with the last date on which the item may be used.9– The package is marked with the date of the packaging or manufacturing of the item.10– Package is not marked with any kind of date indicating freshness, such as use-by, best before or packaging date.31– Package is marked with the product best before date.32– The package is marked recyclable.33– The package is marked returnable.34– The information is related to product marking.35– The information is related to the type of package.36– The information specifies the package.37– The information is related to protection of the package.38– The information describes how coverage with tarpaulins is to be provided.39– The information describes the platform or skid location.40– The information gives the location of the load bearing piece.
Showing 20 of 62 values defined for element 7233 in D09B.
-
7224 – To specify the number of packages.
-
1496 – To specify a goods item within a consignment.
Type: an, Max Length: 6
IMD To describe an item in either an industry or free format. (Max 99)
-
C272 – To provide the characteristic of the item being described.
-
7081 – Code specifying the characteristic of an item.
Type: an, Max Length: 3Valid Codes:1– Product in conformity with specifications.2– Description of general product form.3– Product without quality control when received.4– Description of the finish required/available on the product.5– Description of what the end use application of the product will be.6– Description of the method of construction.7– A drug name specially given in order that it may be freely used without legal restriction.8– The characteristic of a product.9– Description of a sub-product.10– Specifies the direction of the grain of the product.11– Item characteristic is described following Customs specifications.12– Description of the type and/or process involved in making the product. E.g. in steel, description of the steelmaking process.13– The degree of excellence of a thing.14– Description of the surface condition (e.g. roughness) of the product.15– Description of any heat treatment or annealing required/performed on the product.16– A code identifying a size system, comprising a set of sizes.17– Description of any special coating required/available on the product.18– Description of any chemical surface treatment required/performed on the product.19– Description of any mechanical surface treatment required/performed on the product.20– Type of transfer capacity.
Showing 20 of 227 values defined for element 7081 in D09B.
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
7081 – Code specifying the characteristic of an item.
-
C273 – Description of an item.
-
7009 – Code specifying an item.
Type: an, Max Length: 17Valid Codes:1– Displayed text is bold.2– Displayed text is dimmed.3– Displayed text is italicised.4– Displayed text is normal.5– Displayed text foreground and background colours are reversed.
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
7008 – Free form description of an item.
Type: an, Max Length: 256 -
7008 – Free form description of an item.
Type: an, Max Length: 256 -
3453 – Code specifying the language name.
Type: an, Max Length: 3
-
7009 – Code specifying an item.
-
7077 – Code specifying the format of a description.
Type: an, Max Length: 3Valid Codes:A– Long description of an item in free form.B– Description of an item in coded and free form text.C– Description of an item in coded format.D– Price look-up description of a product for point of sale receipts.E– Short description of an item in free form.F– Description of an item in free form text.S– Description of an item in a structured format.X– Description of an item in a coded and free text format.
-
7383 – Code specifying the surface or layer of an object.
Type: an, Max Length: 3Valid Codes:1S– The location is side one.2S– The location is side two.AA– To indicate that the entity being specified is on the surface.AB– To indicate that the entity being specified is off the surface.AC– Specifies that the surface/layer/position being described is the soluble portion.AD– The surface or layer of the product being described is the opposite corners.AE– The surface or layer of the product being described are the corner diagonals.AF– The left-hand side (looking forward) of a ship, boat or aircraft.AG– The right-hand side (looking forward) of a ship, boat or aircraft.AH– Surface of a tooth directed toward the face and opposite the lingual surface.AI– Surface of the tooth relating to the cutting edge of the anterior teeth, incisors or canines.AJ– Surface of the tooth toward the back of the dental arch, or away from the midline.AK– Surface of the tooth pertaining to or around the cheek.AL– Surface of the tooth pertaining to the masticating surfaces of the posterior teeth.AM– Surface of the tooth pertaining to or around the tongue.AN– Surface of the tooth toward the midline of the dental arch.BC– The location is at the back of the cab.BS– The location is both sides.BT– The location is on the bottom.DF– The location is in the dual fuel tank positions.
Showing 20 of 33 values defined for element 7383 in D09B.
FTX To provide free form or coded text information. (Max 99)
Elements and codes as defined at FTX above.
RFF To specify a reference. (Max 99)
Elements and codes as defined at RFF above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
GIR To specify a related set of identification numbers. (Max 99)
Elements and codes as defined at GIR above.
GIN To give specific identification numbers, either as single numbers or ranges. (Max 99)
-
C208 – Goods item identification numbers, start and end of consecutively numbered range.
-
7402 – Code specifying the unique identity of an object.
Type: an, Max Length: 35 (Required) -
7402 – Code specifying the unique identity of an object.
Type: an, Max Length: 35
-
7402 – Code specifying the unique identity of an object.
-
C208 – Goods item identification numbers, start and end of consecutively numbered range.
-
7402 – Code specifying the unique identity of an object.
Type: an, Max Length: 35 (Required) -
7402 – Code specifying the unique identity of an object.
Type: an, Max Length: 35
-
7402 – Code specifying the unique identity of an object.
-
C208 – Goods item identification numbers, start and end of consecutively numbered range.
-
7402 – Code specifying the unique identity of an object.
Type: an, Max Length: 35 (Required) -
7402 – Code specifying the unique identity of an object.
Type: an, Max Length: 35
-
7402 – Code specifying the unique identity of an object.
-
C208 – Goods item identification numbers, start and end of consecutively numbered range.
-
7402 – Code specifying the unique identity of an object.
Type: an, Max Length: 35 (Required) -
7402 – Code specifying the unique identity of an object.
Type: an, Max Length: 35
-
7402 – Code specifying the unique identity of an object.
-
C208 – Goods item identification numbers, start and end of consecutively numbered range.
-
7402 – Code specifying the unique identity of an object.
Type: an, Max Length: 35 (Required) -
7402 – Code specifying the unique identity of an object.
Type: an, Max Length: 35
-
7402 – Code specifying the unique identity of an object.
-
7405 – Code qualifying the identification of an object.
Type: an, Max Length: 3 (Required)Valid Codes:AA– A number that is used to identify goods from a freight forwarder/consolidator.AB– The first element in a series of elements that together define the structure of an object.AC– The second element in a series of elements that together define the structure of an object.AD– The third element in a series of elements that together define the structure of an object.AE– The fourth element in a series of elements that together define the structure of an object.AF– The fifth element in a series of elements that together define the structure of an object.AG– The sixth element in a series of elements that together define the structure of an object.AH– The seventh element in a series of elements that together define the structure of an object.AI– The eighth element in a series of elements that together define the structure of an object.AJ– The ninth element in a series of elements that together define the structure of an object.AK– The identity of a data set.AL– [1420] Reference number to identify a kanban card.AM– Level number in a hierarchy or other structure.AN– A unique number identifying a particular assembly or other manufacturing process.AO– A number to identify the position within a package according to agreed rules between partners.AP– A name or number which identifies a product.AQ– Number assigned to a release.AR– Statistical concept.AS– A table of items e.g. figures and text represented in rows and columns.AT– Number identifying a group of articles in a predescribed unit load for shipment/dispatch as agreed between partners.
Showing 20 of 93 values defined for element 7405 in D09B.
GEI To identify processing information. (Max 99)
Elements and codes as defined at GEI above.
PRC To identify a process. (Max 99)
-
C242 – Identification of process type and description.
-
7187 – Code specifying a type of process.
Type: an, Max Length: 17 (Required)Valid Codes:1– A process to prepare wood.2– Treatment with a caustic agent.3– A process of digesting.4– Washing with brownstock.5– Removing colour by treatment with an oxidizing agent (a bleach).6– The process of drying pulp.7– Freezing process.8– The information to be processed is in structured form.9– The information to be processed is identical and given in structured and unstructured form.10– The information to be processed is different and is given in structured and unstructured form.11– The information to be processed is in unstructured form.12– Slaughter process.13– Packing process.14– Treated by heat sterilisation.15– Treated by chemical sterilisation.16– Treated by fumigation.17– Treated by irradiation.18– Fueling process.19– Code specifying the process of accepting the terms and conditions under which business will be conducted.20– The provision of a pathology service.
Showing 20 of 101 values defined for element 7187 in D09B.
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
7186 – Free form description of a type of process.
Type: an, Max Length: 35 -
7186 – Free form description of a type of process.
Type: an, Max Length: 35
-
7187 – Code specifying a type of process.
-
C830 – To identify the details of a specific process.
-
7191 – Code specifying a process.
Type: an, Max Length: 17 -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
7190 – Free form description of a process.
Type: an, Max Length: 70
-
7191 – Code specifying a process.
MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 99)
Elements and codes as defined at MEA above.
MOA To specify a monetary amount. (Max 99)
Elements and codes as defined at MOA above.
CDI To describe a physical or logical state. (Max 99)
-
C564 – To give information in coded or clear text form on the physical or logical state.
-
7007 – Code specifying a physical or logical state.
Type: an, Max Length: 3Valid Codes:1– Separated into multiple units.2– Absent or lacking.3– The actual identification is different from the given identification.4– In a damaged state.5– In a state of good condition.6– The product is wrong.7– Held, awaiting further action.8– The object is in a proposed state.9– The object is in an accepted state.10– The object is in a scheduled state.11– The object is in a completed state.12– The object is in a rejected state.13– The object is in a postponed state.14– The object is in a cancelled state.15– The object is obsolete.16– Retaining the original properties, not impaired by spoilage or preservation.
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
7006 – Free form description of a physical or logical state.
Type: an, Max Length: 70
-
7007 – Code specifying a physical or logical state.
-
7001 – Code qualifying the type of physical or logical state.
Type: an, Max Length: 3 (Required)Valid Codes:1– At the time of receipt.2– At the time of despatch.3– The arrival condition of an object.4– The state of an object in its life cycle.
PGI To indicate the group in which a product belongs. (Max 99)
-
C288 – To give product group information.
-
5389 – Code specifying the name of a product group.
Type: an, Max Length: 25 -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
5388 – Name of a product code.
Type: an, Max Length: 35
-
5389 – Code specifying the name of a product group.
-
5379 – Code specifying the type of product group.
Type: an, Max Length: 3 (Required)Valid Codes:1– The product is grouped based on price multiplied with a coefficient.2– Code specifying that the product is not subject to price group.3– Code specifying that the product is indexed in a catalogue.4– Code specifying that all the products of the group have the same price.5– Code specifying that the product group is itemized.7– Items in this discount group are available to the buyer at a common discount percentage.8– The common discount percentage group to which an item previously belonged.9– No grouping is being used.10– Products grouped together on the basis of price.11– A code indicating a product group.12– Grouping of products for promotional reasons.13– A product group governed by a common set of legal rules.14– The target market is a geographical region based upon geographical boundaries sanctioned by the United Nations.
TCC To specify charges. (Max 99)
-
C200 – Identification of a charge by code and/or by name.
-
8023 – Code identifying freight and other charges.
Type: an, Max Length: 17 -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
8022 – Free form description of freight and other charges.
Type: an, Max Length: 26 -
4237 – Code specifying the arrangements for a payment.
Type: an, Max Length: 3Valid Codes:A– Responsibility for payment of transport charges unknown at time of departure.B– A third party to pay the freight bill is known at the time of shipment.C– Charges are (to be) collected from the consignee at the destination.P– Charges are (to be) prepaid before the transport actually leaves.
-
7140 – To identify an item.
Type: an, Max Length: 35
-
8023 – Code identifying freight and other charges.
-
C203 – Identification of the applicable rate/tariff class.
-
5243 – Code specifying an applicable rate or tariff class.
Type: an, Max Length: 9 (Required)Valid Codes:A– Rate class applies to senior persons.B– Code specifying that the rate or tariff is a basic one.C– Code specifying the specific commodity rate.D– Rate class applies to teenagers.E– Rate class applies to children.F– Rate class applies to adults.K– Code specifying the rate per kilogram.M– Code specifying the minimum charge rate.N– Code specifying the normal rate.Q– Code specifying the quantity rate.R– Code specifying the reduction on normal rate.S– Code specifying the surcharge on normal rate.
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
5242 – Free form description of an applicable rate or tariff class.
Type: an, Max Length: 35 -
5275 – Code specifying a supplementary rate or tariff.
Type: an, Max Length: 6 -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
5275 – Code specifying a supplementary rate or tariff.
Type: an, Max Length: 6 -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
5243 – Code specifying an applicable rate or tariff class.
-
C528 – Identification of commodity/rates.
-
7357 – Code identifying a commodity for Customs, transport or statistical purposes (generic term).
Type: an, Max Length: 18 -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
7357 – Code identifying a commodity for Customs, transport or statistical purposes (generic term).
-
C554 – Identification of the applicable rate/tariff class.
-
5243 – Code specifying an applicable rate or tariff class.
Type: an, Max Length: 9Valid Codes:A– Rate class applies to senior persons.B– Code specifying that the rate or tariff is a basic one.C– Code specifying the specific commodity rate.D– Rate class applies to teenagers.E– Rate class applies to children.F– Rate class applies to adults.K– Code specifying the rate per kilogram.M– Code specifying the minimum charge rate.N– Code specifying the normal rate.Q– Code specifying the quantity rate.R– Code specifying the reduction on normal rate.S– Code specifying the surcharge on normal rate.
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
5243 – Code specifying an applicable rate or tariff class.
CNT To provide control total. (Max 99)
Elements and codes as defined at CNT above.
IFD To specify details about items of information. (Max 99)
Elements and codes as defined at IFD above.
Group SG110 (Max 99)
LOC To identify a place or a location and/or related locations. (Max 1) Required
Elements and codes as defined at LOC above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG111 (Max 99)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG112 (Max 99)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 99)
Elements and codes as defined at COM above.
Group SG113 (Max 99)
DOC To identify documents and details directly related to it. (Max 1) Required
Elements and codes as defined at DOC above.
RFF To specify a reference. (Max 99)
Elements and codes as defined at RFF above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
MOA To specify a monetary amount. (Max 99)
Elements and codes as defined at MOA above.
ALI To indicate that special conditions due to the origin, customs preference, fiscal or commercial factors are applicable. (Max 1)
Elements and codes as defined at ALI above.
QTY To specify a pertinent quantity. (Max 99)
Elements and codes as defined at QTY above.
TSR To specify the contract and carriage conditions and service and priority requirements for the transport. (Max 99)
Elements and codes as defined at TSR above.
Group SG114 (Max 99)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
Group SG115 (Max 99)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 99)
Elements and codes as defined at COM above.
Group SG117 (Max 99)
RCS To specify sector/subject requirements and conditions. (Max 1) Required
Elements and codes as defined at RCS above.
FTX To provide free form or coded text information. (Max 9)
Elements and codes as defined at FTX above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
GEI To identify processing information. (Max 99)
Elements and codes as defined at GEI above.
ALI To indicate that special conditions due to the origin, customs preference, fiscal or commercial factors are applicable. (Max 99)
Elements and codes as defined at ALI above.
Group SG119 (Max 999)
PAC To describe the number and type of packages/physical units. (Max 1) Required
Elements and codes as defined at PAC above.
PCI To specify markings and labels on individual packages or physical units. (Max 99)
Elements and codes as defined at PCI above.
FTX To provide free form or coded text information. (Max 99)
Elements and codes as defined at FTX above.
GEI To identify processing information. (Max 99)
Elements and codes as defined at GEI above.
DIM To specify dimensions. (Max 99)
Elements and codes as defined at DIM above.
MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 99)
Elements and codes as defined at MEA above.
Group SG120 (Max 99)
COD To provide component details of an object (e.g. product, container) such as its type and the material of which it is composed. (Max 1) Required
-
C823 – To identify the type of unit/component of an object (e.g. lock, door, tyre).
-
7505 – Code specifying a type of unit or component.
Type: an, Max Length: 3 -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
7504 – Free form description of a type of unit or component.
Type: an, Max Length: 35
-
7505 – Code specifying a type of unit or component.
-
C824 – To identify the material of which a component is composed (e.g. steel, plastics).
-
7507 – Code specifying a component material.
Type: an, Max Length: 3 -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
7506 – Free form description of a component material.
Type: an, Max Length: 35
-
7507 – Code specifying a component material.
QTY To specify a pertinent quantity. (Max 99)
Elements and codes as defined at QTY above.
PCD To specify percentage information. (Max 99)
Elements and codes as defined at PCD above.
GEI To identify processing information. (Max 99)
Elements and codes as defined at GEI above.
Group SG121 (Max 1)
INP To specify parties to an instruction, the instruction, or both. (Max 1) Required
Elements and codes as defined at INP above.
DTM To specify date, and/or time, or period. (Max 9)
Elements and codes as defined at DTM above.
LOC To identify a place or a location and/or related locations. (Max 99)
Elements and codes as defined at LOC above.
Group SG122 (Max 1)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG123 (Max 99)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 99)
Elements and codes as defined at COM above.
Group SG124 (Max 99)
TAX To specify relevant duty/tax/fee information. (Max 1) Required
Elements and codes as defined at TAX above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
ALI To indicate that special conditions due to the origin, customs preference, fiscal or commercial factors are applicable. (Max 99)
Elements and codes as defined at ALI above.
MOA To specify a monetary amount. (Max 99)
Elements and codes as defined at MOA above.
QTY To specify a pertinent quantity. (Max 99)
Elements and codes as defined at QTY above.
Group SG125 (Max 99)
PAI To specify the instructions for payment. (Max 1) Required
Elements and codes as defined at PAI above.
RFF To specify a reference. (Max 99)
Elements and codes as defined at RFF above.
MOA To specify a monetary amount. (Max 99)
Elements and codes as defined at MOA above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG126 (Max 99)
GIR To specify a related set of identification numbers. (Max 1) Required
Elements and codes as defined at GIR above.
LOC To identify a place or a location and/or related locations. (Max 99)
Elements and codes as defined at LOC above.
VLI To identify a coded or non coded value list. (Max 1)
Elements and codes as defined at VLI above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG127 (Max 99)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG128 (Max 99)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 99)
Elements and codes as defined at COM above.
Group SG129 (Max 99)
DLI To specify the processing mode of a specific line within a referenced document. (Max 1) Required
-
1073 – Code indicating an action associated with a line of a document.
Type: an, Max Length: 3 (Required)Valid Codes:1– The document line is included in the document/transaction.2– The document line is excluded from the document/transaction.
-
1082 – To identify a line item.
Type: an, Max Length: 6 (Required)
MOA To specify a monetary amount. (Max 99)
Elements and codes as defined at MOA above.
Group SG130 (Max 99)
STS To specify the status of an object or service, including its category and the reason(s) for the status. (Max 1) Required
Elements and codes as defined at STS above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG132 (Max 99)
TMP To specify the temperature setting. (Max 1) Required
Elements and codes as defined at TMP above.
MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 99)
Elements and codes as defined at MEA above.
DGS To identify dangerous goods. (Max 99)
Elements and codes as defined at DGS above.
HYN A segment to identify hierarchical connections from a given item to a higher or lower levelled item or to identify dependencies among the content of hierarchically related groups of data. (Max 1) Required
-
C212 – Goods identification for a specified source.
-
7140 – To identify an item.
Type: an, Max Length: 35 -
7143 – Coded identification of an item type.
Type: an, Max Length: 3Valid Codes:AA– Number assigned by manufacturer or seller to identify the release of a product.AB– The item number is that of an assembly.AC– Article identifier used within health sector to indicate data used conforms to HIBC.AD– Number assigned to a cold roll.AE– Number assigned to a hot roll.AF– Number assigned to a slab, which is produced in a particular production step.AG– A number assigned to indicate a revision of software.AH– An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.AI– A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.AJ– Number assigned to a sample.AK– Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).AL– A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.AM– A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.AN– A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.AO– A code which specifies the codification of the state's labelling requirements.AP– Number assigned to the heat (also known as the iron charge) for the production of steel products.AQ– A number identifying a coupon.AR– A number to identify a resource.AS– A number to identify a work task.AT– Identification number on a product allowing a quick electronic retrieval of price information for that product.
Showing 20 of 164 values defined for element 7143 in D09B.
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
7140 – To identify an item.
-
7173 – Code qualifying an object in a hierarchy.
Type: an, Max Length: 3 (Required)Valid Codes:1– Hierarchy applying to figures (an illustration showing the components of an item).2– Hierarchy applying to products.3– No hierarchy to be described.4– Objects are related in the hierarchy as data structures.5– An item assembled from a number of component parts.6– Part assembled with other items to produce an assembly.7– A structured view on how an item is composed.8– Hierarchy applies to financial institution details information.9– Hierarchy applies to financial data information.10– Hierarchy applies to party history information.11– Hierarchy applies to entity identification information.12– Hierarchy applies to business insurance information.13– Hierarchy applies to credit appraisal information.14– Hierarchy applies to location information.15– Hierarchy applies to management details information.16– Hierarchy applies to operations information.17– Hierarchy applies to payment handling information.18– Hierarchy applies to public records information.19– Hierarchy applies to real estate property information.20– Hierarchy applies to related entities information.
Showing 20 of 33 values defined for element 7173 in D09B.
-
7171 – Code specifying the relationship between the hierarchical object and an identified object.
Type: an, Max Length: 3Valid Codes:1– Identifies the immediate higher levelled hierarchy stage.2– Identifies the immediate lower levelled hierarchy stage.3– Message level.4– Segment level.5– Composite data element level.6– Simple data element level.7– Code level.
-
1229 – Code specifying the action to be taken or already taken.
Type: an, Max Length: 3Valid Codes:1– The information is to be or has been added.2– The information is to be or has been deleted.3– The information is to be or has been changed.4– This line item is not affected by the actual message.5– This line item is entirely accepted by the seller.6– This line item is accepted but amended by the seller.7– This line item is not accepted by the seller.8– Code specifying that the message is a schedule only.9– Code specifying that amendments are requested/notified.10– This line item is not found in the referenced message.11– This line is not amended by the buyer.12– Code specifying that the line item numbers have changed.13– Buyer has deducted amount from payment.14– Buyer has a claim against an outstanding invoice.15– Factor has been requested to charge back the outstanding item.16– Seller agrees to issue a credit note.17– New settlement terms have been agreed.18– Factor agrees to abide by the outcome of negotiations between seller and buyer.19– Seller does not accept validity of dispute.20– The reported situation is settled.
Showing 20 of 115 values defined for element 1229 in D09B.
-
7166 – To identify the next higher level in a hierarchical structure.
Type: an, Max Length: 35
Group SG133 (Max 9999)
CNI To identify one consignment. (Max 1) Required
Elements and codes as defined at CNI above.
RFF To specify a reference. (Max 99)
Elements and codes as defined at RFF above.
GEI To identify processing information. (Max 99)
Elements and codes as defined at GEI above.
STS To specify the status of an object or service, including its category and the reason(s) for the status. (Max 99)
Elements and codes as defined at STS above.
MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 1)
Elements and codes as defined at MEA above.
QTY To specify a pertinent quantity. (Max 99)
Elements and codes as defined at QTY above.
MOA To specify a monetary amount. (Max 99)
Elements and codes as defined at MOA above.
IFD To specify details about items of information. (Max 99)
Elements and codes as defined at IFD above.
HAN To specify handling and where necessary, notify hazards. (Max 1)
-
C524 – Instruction for the handling of goods, products or articles in shipment, storage etc.
-
4079 – Code specifying a handling instruction.
Type: an, Max Length: 3Valid Codes:1– The object is heat sensitive.2– The object must be stored in dry environment.3– The identified item is, or can be stacked.4– Request to arrange boatmen to (de)moor the vessel at the berth.5– Information that the boatmen to (de)moor the vessel at the berth are already arranged.6– Request to arrange the pilotage for the vessel.7– Information that pilotage for the vessel is already arranged.8– Request to arrange the towage for the vessel to/from the berth in the port.9– Request to arrange the disposal of waste.10– The consignment has to be transshipped.
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
4078 – Free form description of a handling instruction.
Type: an, Max Length: 512
-
4079 – Code specifying a handling instruction.
-
C218 – To specify a hazardous material.
-
7419 – Code specifying a kind of hazard for a material.
Type: an, Max Length: 7 -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
7418 – Name of a kind of hazard for a material.
Type: an, Max Length: 35
-
7419 – Code specifying a kind of hazard for a material.
Group SG134 (Max 99)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG135 (Max 99)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 99)
Elements and codes as defined at COM above.
Group SG136 (Max 99)
LOC To identify a place or a location and/or related locations. (Max 1) Required
Elements and codes as defined at LOC above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG137 (Max 99)
DOC To identify documents and details directly related to it. (Max 1) Required
Elements and codes as defined at DOC above.
RFF To specify a reference. (Max 99)
Elements and codes as defined at RFF above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
MOA To specify a monetary amount. (Max 99)
Elements and codes as defined at MOA above.
ALI To indicate that special conditions due to the origin, customs preference, fiscal or commercial factors are applicable. (Max 1)
Elements and codes as defined at ALI above.
QTY To specify a pertinent quantity. (Max 99)
Elements and codes as defined at QTY above.
TSR To specify the contract and carriage conditions and service and priority requirements for the transport. (Max 99)
Elements and codes as defined at TSR above.
Group SG138 (Max 99)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
Group SG139 (Max 99)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 99)
Elements and codes as defined at COM above.
Group SG141 (Max 99)
RCS To specify sector/subject requirements and conditions. (Max 1) Required
Elements and codes as defined at RCS above.
FTX To provide free form or coded text information. (Max 9)
Elements and codes as defined at FTX above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
GEI To identify processing information. (Max 99)
Elements and codes as defined at GEI above.
ALI To indicate that special conditions due to the origin, customs preference, fiscal or commercial factors are applicable. (Max 99)
Elements and codes as defined at ALI above.
Group SG143 (Max 1)
INP To specify parties to an instruction, the instruction, or both. (Max 1) Required
Elements and codes as defined at INP above.
DTM To specify date, and/or time, or period. (Max 9)
Elements and codes as defined at DTM above.
LOC To identify a place or a location and/or related locations. (Max 99)
Elements and codes as defined at LOC above.
Group SG144 (Max 1)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG145 (Max 99)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 99)
Elements and codes as defined at COM above.
Group SG146 (Max 99)
TOD To specify terms of delivery or transport. (Max 1) Required
Elements and codes as defined at TOD above.
RTE To specify rate information. (Max 1)
-
C128 – Rate per unit and rate basis.
-
5419 – Code qualifying the type of rate.
Type: an, Max Length: 3 (Required)Valid Codes:1– Code specifying the allowance rate.2– Code specifying the charge rate.3– Difference rate of actual price and calculated price.4– Labour rate for a normal working day. Synonym: Straight time.5– Labour rate for overtime.6– Labour rate for premium time.7– To identify a rate which is to be applied in a calculation.8– The coefficient which is to be used as a multiplier.9– To specify the rate of an indemnity.10– To specify the rate that has been used to calculate the monetary amount reserved as a guarantee.11– To specify the rate of an indemnity for waiting.ZZZ– The rate type is mutually agreed by the interchanging parties.
-
5420 – To specify the rate per unit specified in the unit price basis.
Type: n, Max Length: 15 (Required) -
5284 – To specify the basis for a unit price.
Type: n, Max Length: 9 -
6411 – Code specifying the unit of measurement.
Type: an, Max Length: 8
-
5419 – Code qualifying the type of rate.
-
4405 – Code specifying a status.
Type: an, Max Length: 3Valid Codes:1– Remark that the requested service in the order remains outstanding.2– The instruction has been completed.3– The information has been passed on.4– The amount has the status of finality.5– The amount is subject to finality.6– The amount quoted is a minimum tariff.7– The amount quoted is a fixed tariff.8– The amount quoted is a maximum tariff.9– The amount is quoted for information only, it is not part of the charges to be deducted or added.10– The amount is available today.11– The amount is available on the next banking office day after the booking date.12– The amount is available on the second banking office day after the booking date.13– The amount available on the third banking office day after the booking date.14– Funds not collected by beneficiary.15– The amount or quantity is zero.16– No status or condition has been advised.17– A status or condition has been requested.18– No charge is to be made.19– The quantity has been the subject of a rounding operation.20– Intended to last or function indefinitely.
Showing 20 of 145 values defined for element 4405 in D09B.
MOA To specify a monetary amount. (Max 1)
Elements and codes as defined at MOA above.
Group SG147 (Max 9)
PAC To describe the number and type of packages/physical units. (Max 1) Required
Elements and codes as defined at PAC above.
PCI To specify markings and labels on individual packages or physical units. (Max 99)
Elements and codes as defined at PCI above.
FTX To provide free form or coded text information. (Max 99)
Elements and codes as defined at FTX above.
GEI To identify processing information. (Max 99)
Elements and codes as defined at GEI above.
DIM To specify dimensions. (Max 99)
Elements and codes as defined at DIM above.
MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 99)
Elements and codes as defined at MEA above.
Group SG148 (Max 99)
TMP To specify the temperature setting. (Max 1) Required
Elements and codes as defined at TMP above.
MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 99)
Elements and codes as defined at MEA above.
DGS To identify dangerous goods. (Max 99)
Elements and codes as defined at DGS above.
Group SG149 (Max 99)
RSL To specify a discrete or non-discrete result as a value or value range. (Max 1) Required
-
C831 – To specify a value.
-
6314 – To specify the value of a measurement.
Type: an, Max Length: 18 -
6321 – Code specifying the significance of a measurement.
Type: an, Max Length: 3Valid Codes:3– The measurement is approximately equal to that specified.4– The measurement is equal to that specified.5– The measurement is greater than or equal to that specified.6– The measurement is greater than that specified.7– The measurement is less than that specified.8– The measurement is less than or equal to that specified.9– Average value for a specific series of readings.10– The measurement is not equal to that specified.12– The measurement reported is a true value.13– The measurement reported is an observed value.14– The measurement marked on the object.15– The measurement reported is out of range.
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
6314 – To specify the value of a measurement.
-
C831 – To specify a value.
-
6314 – To specify the value of a measurement.
Type: an, Max Length: 18 -
6321 – Code specifying the significance of a measurement.
Type: an, Max Length: 3Valid Codes:3– The measurement is approximately equal to that specified.4– The measurement is equal to that specified.5– The measurement is greater than or equal to that specified.6– The measurement is greater than that specified.7– The measurement is less than that specified.8– The measurement is less than or equal to that specified.9– Average value for a specific series of readings.10– The measurement is not equal to that specified.12– The measurement reported is a true value.13– The measurement reported is an observed value.14– The measurement marked on the object.15– The measurement reported is out of range.
-
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
6314 – To specify the value of a measurement.
-
C848 – To specify a measurement unit.
-
6411 – Code specifying the unit of measurement.
Type: an, Max Length: 8 -
1131 – Code identifying a user or association maintained code list.
Type: an, Max Length: 17 -
3055 – Code specifying the agency responsible for a code list.
Type: an, Max Length: 3Valid Codes:1– Customs Co-operation Council (now World Customs Organization).2– Generic: see also 140, 141, 142, 162.3– The airline industry's international organisation.4– International Chamber of Commerce.5– International Organization of Standardization.6– United Nations Economic Commission for Europe.7– EDI project for chemical industry.8– Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.9– GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.10– Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).11– A register of ocean going vessels maintained by Lloyd's of London.12– International Union of Railways.13– International Civil Aviation Organization.14– International Chamber of Shipping.15– Reinsurance and Insurance Network.16– Identifies the Dun & Bradstreet Corporation, United States.17– Society for Worldwide Interbank Financial Telecommunications s.c.18– SAD = Single Administrative Document.19– Federal Reserve Routing Code.20– The container industry's international organisation responsible for the issuance of container-related codes.
Showing 20 of 383 values defined for element 3055 in D09B.
-
6410 – Name of a measurement unit.
Type: an, Max Length: 35
-
6411 – Code specifying the unit of measurement.
-
6087 – Code qualifying the type of a result value.
Type: an, Max Length: 3 (Required)Valid Codes:1– Measurement result.2– The conclusion resulting from an assessment of bank accounts over time.3– The resultant assignment of a credit level based on an assessment of credit worthiness.4– The resultant assignment of a credit rating based on an assessment of credit worthiness.5– The resulting assessment of credit worthiness.6– The resulting assessment of liquidity.7– The resulting assessment of loan payment history.8– The summarization of the overall assessment.9– The resulting assessment of financial conditions.10– The resulting assessment of trade payments.11– The resulting ranking based on one entity's failure risk score as compared to other entities.12– Score representing the risk of an entity failing.13– The resulting assessment of resources used for financing a business.14– The resulting assessment of the risk of an entity having delinquent payments.15– The resulting assessment of the entity's actual delinquent payments.16– The resulting ranking of one entity's payment delinquency score as compared to other entities.17– The resulting assessment of delinquencies as they relate to all entities.18– The assessment of average trade payments for all entities.19– The resulting ranking based on revenue.20– The resulting ranking based on sales growth.
Showing 20 of 26 values defined for element 6087 in D09B.
-
6077 – Code specifying the representation of a result.
Type: an, Max Length: 3Valid Codes:1– Numerical value range.2– Numerical value.3– The result is a coded value.4– The result is expressed as an alphanumeric value.5– The result is expressed as free text narrative.6– The result is expressed as a value related to time.
-
6079 – Code specifying the degree of conformance to a standard.
Type: an, Max Length: 3Valid Codes:1– Above high reference limit.2– Below low reference limit.3– The result value is outside lower and upper reference limit.
QTY To specify a pertinent quantity. (Max 99)
Elements and codes as defined at QTY above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG150 (Max 1)
GOR To indicate the requirement for a specific governmental action and/or procedure or which specific procedure is valid for a specific part of the transport and cross-border transactions. (Max 1) Required
Elements and codes as defined at GOR above.
LOC To identify a place or a location and/or related locations. (Max 1)
Elements and codes as defined at LOC above.
Group SG151 (Max 99)
EQD To identify a unit of equipment. (Max 1) Required
Elements and codes as defined at EQD above.
SEQ To provide details relating to the sequence. (Max 1) Required
Elements and codes as defined at SEQ above.
GEI To identify processing information. (Max 99)
Elements and codes as defined at GEI above.
SEL To specify the seal number or a range of seal numbers. (Max 99)
Elements and codes as defined at SEL above.
Group SG152 (Max 99)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG153 (Max 99)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 99)
Elements and codes as defined at COM above.
Group SG155 (Max 99)
TDT To specify information regarding the transport such as mode of transport, means of transport, its conveyance reference number and the identification of the means of transport. (Max 1) Required
Elements and codes as defined at TDT above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
RFF To specify a reference. (Max 99)
Elements and codes as defined at RFF above.
QTY To specify a pertinent quantity. (Max 99)
Elements and codes as defined at QTY above.
MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 99)
Elements and codes as defined at MEA above.
MOA To specify a monetary amount. (Max 99)
Elements and codes as defined at MOA above.
POC To specify the purpose of the call of the conveyance. (Max 99)
Elements and codes as defined at POC above.
DIM To specify dimensions. (Max 99)
Elements and codes as defined at DIM above.
FTX To provide free form or coded text information. (Max 99)
Elements and codes as defined at FTX above.
GDS To indicate the type of cargo as a general classification. (Max 99)
Elements and codes as defined at GDS above.
STS To specify the status of an object or service, including its category and the reason(s) for the status. (Max 1)
Elements and codes as defined at STS above.
GPO To specify a geographical position. (Max 1)
Elements and codes as defined at GPO above.
Group SG156 (Max 99)
LOC To identify a place or a location and/or related locations. (Max 1) Required
Elements and codes as defined at LOC above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG157 (Max 99)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
NAT To specify a nationality. (Max 1)
Elements and codes as defined at NAT above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
LOC To identify a place or a location and/or related locations. (Max 99)
Elements and codes as defined at LOC above.
EMP To specify employment details. (Max 99)
Elements and codes as defined at EMP above.
Group SG158 (Max 99)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 99)
Elements and codes as defined at COM above.
Group SG160 (Max 99)
DOC To identify documents and details directly related to it. (Max 1) Required
Elements and codes as defined at DOC above.
RFF To specify a reference. (Max 99)
Elements and codes as defined at RFF above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
MOA To specify a monetary amount. (Max 99)
Elements and codes as defined at MOA above.
ALI To indicate that special conditions due to the origin, customs preference, fiscal or commercial factors are applicable. (Max 1)
Elements and codes as defined at ALI above.
QTY To specify a pertinent quantity. (Max 99)
Elements and codes as defined at QTY above.
TSR To specify the contract and carriage conditions and service and priority requirements for the transport. (Max 99)
Elements and codes as defined at TSR above.
Group SG161 (Max 99)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
Group SG162 (Max 99)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 99)
Elements and codes as defined at COM above.
Group SG163 (Max 99)
LOC To identify a place or a location and/or related locations. (Max 1) Required
Elements and codes as defined at LOC above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG164 (Max 99)
AJT To identify the reason for an adjustment. (Max 1) Required
Elements and codes as defined at AJT above.
Group SG166 (Max 99)
EQD To identify a unit of equipment. (Max 1) Required
Elements and codes as defined at EQD above.
SEQ To provide details relating to the sequence. (Max 1) Required
Elements and codes as defined at SEQ above.
GEI To identify processing information. (Max 99)
Elements and codes as defined at GEI above.
SEL To specify the seal number or a range of seal numbers. (Max 99)
Elements and codes as defined at SEL above.
Group SG167 (Max 99)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG168 (Max 99)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 99)
Elements and codes as defined at COM above.
Group SG170 (Max 9999)
SEQ To provide details relating to the sequence. (Max 1) Required
Elements and codes as defined at SEQ above.
GEI To identify processing information. (Max 99)
Elements and codes as defined at GEI above.
STS To specify the status of an object or service, including its category and the reason(s) for the status. (Max 99)
Elements and codes as defined at STS above.
RFF To specify a reference. (Max 99)
Elements and codes as defined at RFF above.
IFD To specify details about items of information. (Max 99)
Elements and codes as defined at IFD above.
Group SG171 (Max 99)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG172 (Max 99)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 99)
Elements and codes as defined at COM above.
Group SG173 (Max 99)
LOC To identify a place or a location and/or related locations. (Max 1) Required
Elements and codes as defined at LOC above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG174 (Max 99)
DOC To identify documents and details directly related to it. (Max 1) Required
Elements and codes as defined at DOC above.
RFF To specify a reference. (Max 99)
Elements and codes as defined at RFF above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
MOA To specify a monetary amount. (Max 99)
Elements and codes as defined at MOA above.
ALI To indicate that special conditions due to the origin, customs preference, fiscal or commercial factors are applicable. (Max 1)
Elements and codes as defined at ALI above.
QTY To specify a pertinent quantity. (Max 99)
Elements and codes as defined at QTY above.
TSR To specify the contract and carriage conditions and service and priority requirements for the transport. (Max 99)
Elements and codes as defined at TSR above.
Group SG175 (Max 99)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
Group SG176 (Max 99)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 99)
Elements and codes as defined at COM above.
Group SG177 (Max 99)
LOC To identify a place or a location and/or related locations. (Max 1) Required
Elements and codes as defined at LOC above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG178 (Max 99)
AJT To identify the reason for an adjustment. (Max 1) Required
Elements and codes as defined at AJT above.
Group SG180 (Max 99)
RCS To specify sector/subject requirements and conditions. (Max 1) Required
Elements and codes as defined at RCS above.
FTX To provide free form or coded text information. (Max 9)
Elements and codes as defined at FTX above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
GEI To identify processing information. (Max 99)
Elements and codes as defined at GEI above.
ALI To indicate that special conditions due to the origin, customs preference, fiscal or commercial factors are applicable. (Max 99)
Elements and codes as defined at ALI above.
Group SG182 (Max 99)
INP To specify parties to an instruction, the instruction, or both. (Max 1) Required
Elements and codes as defined at INP above.
DTM To specify date, and/or time, or period. (Max 9)
Elements and codes as defined at DTM above.
LOC To identify a place or a location and/or related locations. (Max 99)
Elements and codes as defined at LOC above.
Group SG183 (Max 1)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG184 (Max 99)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 99)
Elements and codes as defined at COM above.
Group SG185 (Max 99)
MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 1) Required
Elements and codes as defined at MEA above.
QTY To specify a pertinent quantity. (Max 99)
Elements and codes as defined at QTY above.
Group SG186 (Max 999)
PAC To describe the number and type of packages/physical units. (Max 1) Required
Elements and codes as defined at PAC above.
PCI To specify markings and labels on individual packages or physical units. (Max 99)
Elements and codes as defined at PCI above.
FTX To provide free form or coded text information. (Max 99)
Elements and codes as defined at FTX above.
GEI To identify processing information. (Max 99)
Elements and codes as defined at GEI above.
DIM To specify dimensions. (Max 99)
Elements and codes as defined at DIM above.
MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 99)
Elements and codes as defined at MEA above.
Group SG187 (Max 99)
TMP To specify the temperature setting. (Max 1) Required
Elements and codes as defined at TMP above.
MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 99)
Elements and codes as defined at MEA above.
DGS To identify dangerous goods. (Max 99)
Elements and codes as defined at DGS above.
Group SG188 (Max 99)
EQD To identify a unit of equipment. (Max 1) Required
Elements and codes as defined at EQD above.
SEQ To provide details relating to the sequence. (Max 1) Required
Elements and codes as defined at SEQ above.
GEI To identify processing information. (Max 99)
Elements and codes as defined at GEI above.
SEL To specify the seal number or a range of seal numbers. (Max 99)
Elements and codes as defined at SEL above.
Group SG189 (Max 99)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG190 (Max 99)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 99)
Elements and codes as defined at COM above.
Group SG192 (Max 99)
GID To indicate totals of a goods item. (Max 1) Required
Elements and codes as defined at GID above.
IMD To describe an item in either an industry or free format. (Max 99)
Elements and codes as defined at IMD above.
FTX To provide free form or coded text information. (Max 99)
Elements and codes as defined at FTX above.
RFF To specify a reference. (Max 99)
Elements and codes as defined at RFF above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
GIR To specify a related set of identification numbers. (Max 99)
Elements and codes as defined at GIR above.
GIN To give specific identification numbers, either as single numbers or ranges. (Max 99)
Elements and codes as defined at GIN above.
GEI To identify processing information. (Max 99)
Elements and codes as defined at GEI above.
PRC To identify a process. (Max 99)
Elements and codes as defined at PRC above.
MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 99)
Elements and codes as defined at MEA above.
MOA To specify a monetary amount. (Max 99)
Elements and codes as defined at MOA above.
CDI To describe a physical or logical state. (Max 99)
Elements and codes as defined at CDI above.
PGI To indicate the group in which a product belongs. (Max 99)
Elements and codes as defined at PGI above.
TCC To specify charges. (Max 99)
Elements and codes as defined at TCC above.
IFD To specify details about items of information. (Max 99)
Elements and codes as defined at IFD above.
CNT To provide control total. (Max 99)
Elements and codes as defined at CNT above.
Group SG193 (Max 99)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG194 (Max 99)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 99)
Elements and codes as defined at COM above.
Group SG195 (Max 99)
LOC To identify a place or a location and/or related locations. (Max 1) Required
Elements and codes as defined at LOC above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG196 (Max 99)
DOC To identify documents and details directly related to it. (Max 1) Required
Elements and codes as defined at DOC above.
RFF To specify a reference. (Max 99)
Elements and codes as defined at RFF above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
MOA To specify a monetary amount. (Max 99)
Elements and codes as defined at MOA above.
ALI To indicate that special conditions due to the origin, customs preference, fiscal or commercial factors are applicable. (Max 1)
Elements and codes as defined at ALI above.
QTY To specify a pertinent quantity. (Max 99)
Elements and codes as defined at QTY above.
TSR To specify the contract and carriage conditions and service and priority requirements for the transport. (Max 99)
Elements and codes as defined at TSR above.
Group SG197 (Max 99)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
Group SG198 (Max 99)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 99)
Elements and codes as defined at COM above.
Group SG200 (Max 99)
RCS To specify sector/subject requirements and conditions. (Max 1) Required
Elements and codes as defined at RCS above.
FTX To provide free form or coded text information. (Max 9)
Elements and codes as defined at FTX above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
GEI To identify processing information. (Max 99)
Elements and codes as defined at GEI above.
ALI To indicate that special conditions due to the origin, customs preference, fiscal or commercial factors are applicable. (Max 99)
Elements and codes as defined at ALI above.
Group SG202 (Max 99)
PAC To describe the number and type of packages/physical units. (Max 1) Required
Elements and codes as defined at PAC above.
PCI To specify markings and labels on individual packages or physical units. (Max 99)
Elements and codes as defined at PCI above.
FTX To provide free form or coded text information. (Max 99)
Elements and codes as defined at FTX above.
GEI To identify processing information. (Max 99)
Elements and codes as defined at GEI above.
DIM To specify dimensions. (Max 99)
Elements and codes as defined at DIM above.
MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 99)
Elements and codes as defined at MEA above.
Group SG203 (Max 99)
COD To provide component details of an object (e.g. product, container) such as its type and the material of which it is composed. (Max 1) Required
Elements and codes as defined at COD above.
QTY To specify a pertinent quantity. (Max 99)
Elements and codes as defined at QTY above.
PCD To specify percentage information. (Max 99)
Elements and codes as defined at PCD above.
GEI To identify processing information. (Max 99)
Elements and codes as defined at GEI above.
Group SG204 (Max 1)
INP To specify parties to an instruction, the instruction, or both. (Max 1) Required
Elements and codes as defined at INP above.
DTM To specify date, and/or time, or period. (Max 9)
Elements and codes as defined at DTM above.
LOC To identify a place or a location and/or related locations. (Max 99)
Elements and codes as defined at LOC above.
Group SG205 (Max 1)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG206 (Max 99)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 99)
Elements and codes as defined at COM above.
Group SG207 (Max 99)
TAX To specify relevant duty/tax/fee information. (Max 1) Required
Elements and codes as defined at TAX above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
ALI To indicate that special conditions due to the origin, customs preference, fiscal or commercial factors are applicable. (Max 99)
Elements and codes as defined at ALI above.
MOA To specify a monetary amount. (Max 99)
Elements and codes as defined at MOA above.
QTY To specify a pertinent quantity. (Max 99)
Elements and codes as defined at QTY above.
Group SG208 (Max 99)
PAI To specify the instructions for payment. (Max 1) Required
Elements and codes as defined at PAI above.
RFF To specify a reference. (Max 99)
Elements and codes as defined at RFF above.
MOA To specify a monetary amount. (Max 99)
Elements and codes as defined at MOA above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG209 (Max 99)
GIR To specify a related set of identification numbers. (Max 1) Required
Elements and codes as defined at GIR above.
LOC To identify a place or a location and/or related locations. (Max 99)
Elements and codes as defined at LOC above.
VLI To identify a coded or non coded value list. (Max 1)
Elements and codes as defined at VLI above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG210 (Max 99)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG211 (Max 99)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 99)
Elements and codes as defined at COM above.
Group SG212 (Max 99)
DLI To specify the processing mode of a specific line within a referenced document. (Max 1) Required
Elements and codes as defined at DLI above.
MOA To specify a monetary amount. (Max 99)
Elements and codes as defined at MOA above.
Group SG213 (Max 99)
STS To specify the status of an object or service, including its category and the reason(s) for the status. (Max 1) Required
Elements and codes as defined at STS above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG215 (Max 99)
TMP To specify the temperature setting. (Max 1) Required
Elements and codes as defined at TMP above.
MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 99)
Elements and codes as defined at MEA above.
DGS To identify dangerous goods. (Max 99)
Elements and codes as defined at DGS above.
Group SG216 (Max 9999)
LIN To identify a line item and configuration. (Max 1) Required
Elements and codes as defined at LIN above.
MOA To specify a monetary amount. (Max 99)
Elements and codes as defined at MOA above.
IFD To specify details about items of information. (Max 99)
Elements and codes as defined at IFD above.
Group SG217 (Max 99)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG218 (Max 99)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 99)
Elements and codes as defined at COM above.
Group SG219 (Max 99)
LOC To identify a place or a location and/or related locations. (Max 1) Required
Elements and codes as defined at LOC above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG220 (Max 99)
DOC To identify documents and details directly related to it. (Max 1) Required
Elements and codes as defined at DOC above.
RFF To specify a reference. (Max 99)
Elements and codes as defined at RFF above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
MOA To specify a monetary amount. (Max 99)
Elements and codes as defined at MOA above.
ALI To indicate that special conditions due to the origin, customs preference, fiscal or commercial factors are applicable. (Max 1)
Elements and codes as defined at ALI above.
QTY To specify a pertinent quantity. (Max 99)
Elements and codes as defined at QTY above.
TSR To specify the contract and carriage conditions and service and priority requirements for the transport. (Max 99)
Elements and codes as defined at TSR above.
Group SG221 (Max 99)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
Group SG222 (Max 99)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 99)
Elements and codes as defined at COM above.
Group SG224 (Max 99)
RCS To specify sector/subject requirements and conditions. (Max 1) Required
Elements and codes as defined at RCS above.
FTX To provide free form or coded text information. (Max 9)
Elements and codes as defined at FTX above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
GEI To identify processing information. (Max 99)
Elements and codes as defined at GEI above.
ALI To indicate that special conditions due to the origin, customs preference, fiscal or commercial factors are applicable. (Max 99)
Elements and codes as defined at ALI above.
Group SG226 (Max 1)
INP To specify parties to an instruction, the instruction, or both. (Max 1) Required
Elements and codes as defined at INP above.
DTM To specify date, and/or time, or period. (Max 9)
Elements and codes as defined at DTM above.
LOC To identify a place or a location and/or related locations. (Max 99)
Elements and codes as defined at LOC above.
Group SG227 (Max 1)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
Elements and codes as defined at NAD above.
DTM To specify date, and/or time, or period. (Max 99)
Elements and codes as defined at DTM above.
Group SG228 (Max 99)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
Elements and codes as defined at CTA above.
COM To identify a communication number of a department or a person to whom communication should be directed. (Max 99)
Elements and codes as defined at COM above.
Group SG229 (Max 99)
MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 1) Required
Elements and codes as defined at MEA above.
QTY To specify a pertinent quantity. (Max 99)
Elements and codes as defined at QTY above.
Group SG230 (Max 99)
PAC To describe the number and type of packages/physical units. (Max 1) Required
Elements and codes as defined at PAC above.
PCI To specify markings and labels on individual packages or physical units. (Max 99)
Elements and codes as defined at PCI above.
FTX To provide free form or coded text information. (Max 99)
Elements and codes as defined at FTX above.
GEI To identify processing information. (Max 99)
Elements and codes as defined at GEI above.
DIM To specify dimensions. (Max 99)
Elements and codes as defined at DIM above.
MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 99)
Elements and codes as defined at MEA above.
Group SG231 (Max 99)
ARD To provide details of the function of a monetary amount. (Max 1) Required
Elements and codes as defined at ARD above.
MOA To specify a monetary amount. (Max 99)
Elements and codes as defined at MOA above.
GEI To identify processing information. (Max 99)
Elements and codes as defined at GEI above.
PCD To specify percentage information. (Max 99)
Elements and codes as defined at PCD above.
UNS Unknown Segment (Max 1) Required
Elements and codes as defined at UNS above.
AUT To specify results of the application of an authentication procedure. (Max 1)
-
9280 – To specify the value of a validation result.
Type: an, Max Length: 35 (Required) -
9282 – To identify the cryptographic key used for the calculation of the validation.
Type: an, Max Length: 35
CNT To provide control total. (Max 9)
Elements and codes as defined at CNT above.
UNT Unknown Segment (Max 1) Required
Sources and further reading
- GS1 EDI standards GS1 guidance on EDI standards used for supply-chain document exchange.
- UNECE introduction to UN/EDIFACT United Nations guidance on UN/EDIFACT for structured business data exchange.
- X12 EDI standards Official X12 standards body for North American EDI transaction standards.
- OpenPeppol post-award specifications OpenPeppol documentation for e-procurement and e-invoicing specifications.