Try it now Login

UN/EDIFACT D06A DESTIM Message

Review the DESTIM segment sequence, mandatory fields, repeat counts and valid codes for the D06A EDIFACT directory.

Jump to Segment
UNH
BGM
DTM
GEI
CUX
RFF
FTX
EQD
DIM
IMD
NAD
MOA
CTA
COM
TDT
DTM
LOC
DTM
UNS
DTM
LOC
NAD
RFF
DTM
NAD
MOA
LIN
DIM
QTY
FTX
DAM
COD
RTE
QTY
NAD
MOA
TAX
MEA
CNT
UNT
UNH Unknown Segment (Max 1) Required
BGM To indicate the type and function of a message and to transmit the identifying number. (Max 1) Required
  • C002 – Identification of a type of document/message by code or name. Code preferred.
    • 1001 – Code specifying the document name.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Certificate providing the values of an analysis.
      • 2 – Certificate certifying the conformity to predefined definitions.
      • 3 – Certificate certifying the quality of goods, services etc.
      • 4 – Report providing the results of a test session.
      • 5 – Report specifying the performance values of products.
      • 6 – Report providing specification values of products.
      • 7 – Reports on events during production process.
      • 8 – Document/message describes the test report of the first sample.
      • 9 – A document/message to enable the transmission of information regarding pricing and catalogue details for goods and services offered by a seller to a buyer.
      • 10 – Document/message providing basic data concerning a party.
      • 11 – A pre-approved document relating to federal label approval requirements.
      • 12 – Certificate certifying a specific quality of agricultural products.
      • 13 – Document/message which evidences the transport of goods by post (e.g. mail, parcel, etc.).
      • 14 – Certificate certifying the weight of goods.
      • 15 – Document/message specifying the weight of goods.
      • 16 – Document by means of which the documentary credit applicant specifies the conditions for the certificate and by whom the certificate is to be issued.
      • 17 – Document identifying goods in which the issuing authority expressly certifies that the goods originate in a specific country or part of, or group of countries. It also states the price and/or cost of the goods with the purpose of determining the customs origin.
      • 18 – Specific form of transit declaration issued by the exporter (movement certificate).
      • 19 – Certificate certifying the quantity of goods, services etc.
      • 20 – Usage of QALITY-message.

      Showing 20 of 647 values defined for element 1001 in D06A.

    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 317 values defined for element 3055 in D06A.

    • 1000 – Name of a document.
      Type: an, Max Length: 35
  • C106 – Identification of a document/message by its number and eventually its version or revision.
    • 1004 – To identify a document.
      Type: an, Max Length: 35
    • 1056 – To identify a version.
      Type: an, Max Length: 9
    • 1060 – To identify a revision.
      Type: an, Max Length: 6
  • 1225 – Code indicating the function of the message.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – Message cancelling a previous transmission for a given transaction.
    • 2 – Message containing items to be added.
    • 3 – Message containing items to be deleted.
    • 4 – Message containing items to be changed.
    • 5 – Message replacing a previous message.
    • 6 – Message confirming the details of a previous transmission where such confirmation is required or recommended under the terms of a trading partner agreement.
    • 7 – The message is a duplicate of a previously generated message.
    • 8 – Code indicating that the referenced message is a status.
    • 9 – Initial transmission related to a given transaction.
    • 10 – Message whose reference number is not filed.
    • 11 – Message responding to a previous message or document.
    • 12 – Message indicating that the referenced message was received but not yet processed.
    • 13 – Code indicating that the referenced message is a request.
    • 14 – Code indicating that the information contained in the message is an advance notification of information to follow.
    • 15 – Repeated message transmission for reminding purposes.
    • 16 – Message content is a proposal.
    • 17 – Referenced transaction cancelled, reissued message will follow.
    • 18 – New issue of a previous message (maybe cancelled).
    • 19 – Change information submitted by buyer but initiated by seller.
    • 20 – Message to replace the heading of a previous message.

    Showing 20 of 65 values defined for element 1225 in D06A.

  • 4343 – Code specifying the type of acknowledgment required or transmitted.
    Type: an, Max Length: 3
    Valid Codes:
    • AA – Receiver of the payment message needs to return a debit advice in response to the payment message.
    • AB – Indicates that an acknowledgement relating to receipt of message is required.
    • AC – Acknowledge complete including changes.
    • AD – Acknowledge complete without changes.
    • AE – A debit advice is requested for each transaction in the message.
    • AF – The sender wishes to receive both a Debit Advice and an acknowledgement of receipt for a payment message.
    • AG – Authentication, by a party, of a document established for him by another party.
    • AH – A debit advice and message acknowledgement are requested for each transaction in the message.
    • AI – Acknowledgement of changes only is required.
    • AJ – Indication that the referenced offer or transaction (e.g. cargo booking or quotation request) is being dealt with.
    • AP – Indication that the referenced offer or transaction (e.g., cargo booking or quotation request) has been accepted.
    • AQ – The sender of the message expects a response.
    • AR – Documentary credit collection forwarded directly.
    • AS – The receiver of the message is to acknowledge receipt of the message and sent a credit advice for each credit.
    • CA – Indication that the referenced offer or transaction (e.g., cargo booking or quotation request) has been accepted under conditions indicated in this message.
    • CO – Indication that the message contains the physical measurements on which the charges will be based.
    • NA – Specifies that no acknowledgement is needed in response to this message.
    • RE – Indication that the referenced offer or transaction (e.g., cargo booking or quotation request) is not accepted.
    • UR – The message recipient is to send a credit advice in response to the message.
    • US – An acknowledgement is requested when an error occurred.

    Showing 20 of 23 values defined for element 4343 in D06A.

DTM To specify date, and/or time, or period. (Max 9) Required
  • C507 – Date and/or time, or period relevant to the specified date/time/period type.
    • 2005 – Code qualifying the function of a date, time or period.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • 1 – Actual date/time on which the service was completed.
      • 2 – Date on which buyer requests goods to be delivered.
      • 3 – [2377] Date of issue of an invoice.
      • 4 – [2011] Date of order.
      • 5 – A period of time when saleable stocks are expected to cover demand for a product.
      • 6 – The date an entity moved from a location.
      • 7 – (2069) Date and/or time at which specified event or document becomes effective.
      • 8 – Date/time when the purchase order is received by the seller.
      • 9 – Date/time of processing.
      • 10 – Date on which goods should be shipped or despatched by the supplier.
      • 11 – (2170) Date/time on which the goods are or are expected to be despatched or shipped.
      • 12 – Date by which payment should be made if discount terms are to apply.
      • 13 – Date by which payment must be made.
      • 14 – Date/time when instalments are due.
      • 15 – Date/time when promotion activities begin.
      • 16 – Date/time when promotion activities end.
      • 17 – Date and/or time when the shipper of the goods expects delivery will take place.
      • 18 – The date/time/period of the act, or an instance of installing something or someone.
      • 19 – Period of time between slaughter and delivery during which meat is ageing.
      • 20 – Date/time when cheque is issued.

      Showing 20 of 748 values defined for element 2005 in D06A.

    • 2380 – The value of a date, a date and time, a time or of a period in a specified representation.
      Type: an, Max Length: 35
    • 2379 – Code specifying the representation of a date, time or period.
      Type: an, Max Length: 3
      Valid Codes:
      • 2 – Calendar date: D = Day; M = Month; Y = Year.
      • 3 – Calendar date: M = Month; D = Day; Y = Year.
      • 4 – Calendar date C=Century; Y=Year; M=Month; D=Day.
      • 5 – Calendar date and time: C=Century; Y=Year; M=Month; D=Day; H=Hour; M=Minute.
      • 6 – Half-month: CC=century YY=year MM=month, B=1:first half month, B=2:second half month.
      • 7 – Week within a calendar month: CC=century YY=year MM=month. W=1-5 first week to fifth week in a month.
      • 8 – Shift within a calendar day: CC=century YY=year MM=month DD=day S=1-9 shift in a day.
      • 9 – Time period within a calendar day: CC=century YY=year MM=month DD=day PP=00-99 time period.
      • 10 – Calendar date including time with minutes: C=Century; Y=Year; M=Month; D=Day; T=Time designator; H=Hour; M=Minutes. The character [T] shall be used as time designator to indicate the start of the representation of the time. For example: 20010912T1433.
      • 101 – Calendar date: Y = Year; M = Month; D = Day.
      • 102 – Calendar date: C = Century ; Y = Year ; M = Month ; D = Day.
      • 103 – Calendar week day: Y = Year ; W = Week ; D = Day Week number 01 is always first week of January Day number 1 is always Monday.
      • 105 – Calendar day: Y = Year ; D = Day January the first = Day 001 Always start numbering the days of the year from January 1st through December 31st.
      • 106 – Day of a month: M = Month; D = Day.
      • 107 – Day's number within a specific year: D = Day.
      • 108 – Week's number within a specific year: W = Week.
      • 109 – Month's number within a specific year: M = Month.
      • 110 – Day's number within is a specific month: D = Day.
      • 201 – Calendar date including time without seconds: Y = Year; M = Month; D = Day; H = Hour; M = Minute.
      • 202 – Calendar date including time with seconds: Y = Year; M = Month; D = Day; H = Hour; m = Minutes = Seconds.

      Showing 20 of 80 values defined for element 2379 in D06A.

GEI To identify processing information. (Max 1)
  • C012 – Identification of the processing indicator.
    • 7365 – Code specifying a processing indicator.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Content of message is accepted.
      • 2 – Content of message is rejected, with comment.
      • 3 – Content of message is rejected, without comment.
      • 4 – Specified goods have been released from Customs control.
      • 5 – Specified goods are required for examination.
      • 6 – All document, or documents as specified, to be produced.
      • 7 – Specified goods are detained.
      • 8 – Specified goods may move under Customs transfer.
      • 9 – Goods declaration is accepted, awaiting goods arrival.
      • 10 – Declaration is requested.
      • 11 – Information for pre-entry of a goods declaration.
      • 12 – The sender is not allowed to send the message type which was sent.
      • 13 – The message type is not supported by the recipient.
      • 14 – Message conveys information on an error.
      • 15 – Response after correction; correction has been approved.
      • 16 – Response after correction; correction has not been approved.
      • 17 – Message has been received.
      • 18 – Request for clearance of the goods.
      • 19 – Goods are in bulk.
      • 20 – Commercial transaction will be paid by cash within a prescribed time frame.

      Showing 20 of 135 values defined for element 7365 in D06A.

    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 317 values defined for element 3055 in D06A.

    • 7364 – Free form description of a processing indicator.
      Type: an, Max Length: 35
  • 9649 – Code qualifying the processing information.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • 1 – To convey information related to the reporting of assets held by an entity.
    • 2 – Identifies information about accounting data.
    • 3 – Identifies information about the scheduling type.
    • 4 – Identifies information about the party type.
    • 5 – Identifies information about the consignment type.
    • 6 – Defines information required to process the contents of a statistical array.
  • 7187 – Code specifying a type of process.
    Type: an, Max Length: 17
    Valid Codes:
    • 1 – A process to prepare wood.
    • 2 – Treatment with a caustic agent.
    • 3 – A process of digesting.
    • 4 – Washing with brownstock.
    • 5 – Removing colour by treatment with an oxidizing agent (a bleach).
    • 6 – The process of drying pulp.
    • 7 – Freezing process.
    • 8 – The information to be processed is in structured form.
    • 9 – The information to be processed is identical and given in structured and unstructured form.
    • 10 – The information to be processed is different and is given in structured and unstructured form.
    • 11 – The information to be processed is in unstructured form.
    • 12 – Slaughter process.
    • 13 – Packing process.
    • 14 – Treated by heat sterilisation.
    • 15 – Treated by chemical sterilisation.
    • 16 – Treated by fumigation.
    • 17 – Treated by irradiation.
    • 18 – Fueling process.
    • 19 – Code specifying the process of accepting the terms and conditions under which business will be conducted.
    • 20 – The provision of a pathology service.

    Showing 20 of 31 values defined for element 7187 in D06A.

CUX To specify currencies used in the transaction and relevant details for the rate of exchange. (Max 9)
  • C504 – The usage to which a currency relates.
    • 6347 – Code qualifying the usage of a currency.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • 1 – The currency in which charges are to be paid.
      • 2 – The currency applicable to amounts stated. It may have to be converted.
      • 3 – The currency which should be used to the target destination of the transaction.
      • 4 – Currency applicable to amounts stated in a transport document/message.
      • 5 – Currency on which the calculation is based.
      • 6 – Additional currency the message recipient needs for information purposes. The actual message amount(s) is/are not based upon this currency.
      • 7 – Currency in which the account is held.
    • 6345 – Code specifying a monetary unit.
      Type: an, Max Length: 3
    • 6343 – Code qualifying the type of currency.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – The currency of the monetary unit involved in the transaction for customs valuation.
      • 2 – The currency of the monetary unit involved in the transaction for insurance purposes.
      • 3 – The currency of the local monetary unit.
      • 4 – The currency of the monetary unit used for calculation in an invoice.
      • 5 – The currency of the monetary unit of an account.
      • 6 – The currency of the monetary unit to be converted from.
      • 7 – The currency of the monetary unit to be converted into.
      • 8 – The currency of the monetary unit used in a price list.
      • 9 – The currency of the monetary unit used in an order.
      • 10 – The currency of the monetary unit used for pricing purposes.
      • 11 – The currency of the monetary unit used for payment.
      • 12 – The currency of the monetary unit used in a quotation.
      • 13 – The currency of the local monetary unit at recipient's location.
      • 14 – The currency of the monetary unit normally used by the supplier.
      • 15 – The currency of the local monetary unit at sender's location.
      • 16 – The currency as per tariff.
      • 17 – The currency in which the charges are calculated.
      • 18 – The currency in which tax amounts are due or have been paid.
    • 6348 – To specify the value of the multiplication factor used in expressing currency units.
      Type: n, Max Length: 4
  • C504 – The usage to which a currency relates.
    • 6347 – Code qualifying the usage of a currency.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • 1 – The currency in which charges are to be paid.
      • 2 – The currency applicable to amounts stated. It may have to be converted.
      • 3 – The currency which should be used to the target destination of the transaction.
      • 4 – Currency applicable to amounts stated in a transport document/message.
      • 5 – Currency on which the calculation is based.
      • 6 – Additional currency the message recipient needs for information purposes. The actual message amount(s) is/are not based upon this currency.
      • 7 – Currency in which the account is held.
    • 6345 – Code specifying a monetary unit.
      Type: an, Max Length: 3
    • 6343 – Code qualifying the type of currency.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – The currency of the monetary unit involved in the transaction for customs valuation.
      • 2 – The currency of the monetary unit involved in the transaction for insurance purposes.
      • 3 – The currency of the local monetary unit.
      • 4 – The currency of the monetary unit used for calculation in an invoice.
      • 5 – The currency of the monetary unit of an account.
      • 6 – The currency of the monetary unit to be converted from.
      • 7 – The currency of the monetary unit to be converted into.
      • 8 – The currency of the monetary unit used in a price list.
      • 9 – The currency of the monetary unit used in an order.
      • 10 – The currency of the monetary unit used for pricing purposes.
      • 11 – The currency of the monetary unit used for payment.
      • 12 – The currency of the monetary unit used in a quotation.
      • 13 – The currency of the local monetary unit at recipient's location.
      • 14 – The currency of the monetary unit normally used by the supplier.
      • 15 – The currency of the local monetary unit at sender's location.
      • 16 – The currency as per tariff.
      • 17 – The currency in which the charges are calculated.
      • 18 – The currency in which tax amounts are due or have been paid.
    • 6348 – To specify the value of the multiplication factor used in expressing currency units.
      Type: n, Max Length: 4
  • 5402 – To specify the rate at which one specified currency is expressed in another specified currency.
    Type: n, Max Length: 12
  • 6341 – To identify an exchange rate currency market.
    Type: an, Max Length: 3
    Valid Codes:
    • AAA – The currency exchange rate is set by the Paris exchange.
    • AAB – The currency exchange rate is set by the Central Bank of Colombia.
    • AMS – The currency exchange rate is set by the Amsterdam exchange.
    • ARG – Argentina exchange.
    • AST – The currency exchange rate is set by the Australian exchange.
    • AUS – Wiener Boersenkammer.
    • BEL – Commission de la Bourse Bruxelles.
    • CAN – The currency exchange rate is set by the Toronto exchange.
    • CAR – The currency exchange rate is set by a written or spoken agreement between two or more parties.
    • CIE – Currency rates published by the US Customs Information Exchange, 6 WTC, New York NY 10048-0945, USA.
    • DEN – Koebenhavns Fondsboers.
    • ECR – The currency exchange rate is set for a length of time by the European Community.
    • FIN – The currency exchange rate is set by the Helsinki exchange.
    • FRA – The currency exchange rate is set by the Frankfurt exchange.
    • IMF – The currency exchange rate is set by the International Monetary Fund.
    • LNF – The currency exchange rate is set by the London exchange at the first closing.
    • LNS – The currency exchange rate is set by the London exchange at the second closing.
    • MIL – The currency exchange rate is set by the Milan exchange.
    • NOR – The currency exchange rate is set by the Oslo exchange.
    • NYC – The currency exchange rate is set by the New York exchange.

    Showing 20 of 24 values defined for element 6341 in D06A.

RFF To specify a reference. (Max 9)
  • C506 – Identification of a reference.
    • 1153 – Code qualifying a reference.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • AAA – (1018) Reference number identifying the acknowledgement of an order.
      • AAB – [1088] Reference number to identify a proforma invoice.
      • AAC – [1172] Reference number to identify a documentary credit.
      • AAD – [1318] Reference number to identify an addendum to a contract.
      • AAE – Reference number assigned to a goods declaration.
      • AAF – A reference number identifying a debit card.
      • AAG – (1332) Reference number assigned by issuing party to an offer.
      • AAH – Reference number allocated by the bank to a batch of different underlying interbank transactions.
      • AAI – Reference number allocated by the bank to one specific interbank transaction.
      • AAJ – Reference number assigned by issuer to a delivery order.
      • AAK – Reference number assigned by issuing party to a despatch advice.
      • AAL – Reference number identifying a specific product drawing.
      • AAM – Reference number assigned to a waybill, see: 1001 = 700.
      • AAN – Reference number assigned by buyer to a delivery schedule.
      • AAO – [1362] Reference number assigned by the consignee to identify a particular consignment.
      • AAP – [1310] Identifier of a shipment which is part of an order.
      • AAQ – [8260] To identify a piece if transport equipment e.g. container or unit load device.
      • AAR – A reference number assigned by a municipality to identify a business.
      • AAS – [1188] Reference number to identify a document evidencing a transport contract.
      • AAT – Identifies the master label number of any package type.

      Showing 20 of 772 values defined for element 1153 in D06A.

    • 1154 – Identifies a reference.
      Type: an, Max Length: 70
    • 1156 – To identify a line of a document.
      Type: an, Max Length: 6
    • 1056 – To identify a version.
      Type: an, Max Length: 9
    • 1060 – To identify a revision.
      Type: an, Max Length: 6
FTX To provide free form or coded text information. (Max 9)
  • C107 – Coded reference to a standard text and its source.
    • 4441 – Code specifying free form text.
      Type: an, Max Length: 17 (Required)
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 317 values defined for element 3055 in D06A.

  • C108 – Free text; one to five lines.
    • 4440 – Free form text.
      Type: an, Max Length: 512 (Required)
    • 4440 – Free form text.
      Type: an, Max Length: 512
    • 4440 – Free form text.
      Type: an, Max Length: 512
    • 4440 – Free form text.
      Type: an, Max Length: 512
    • 4440 – Free form text.
      Type: an, Max Length: 512
  • 4451 – Code qualifying the subject of the text.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • AAA – [7002] Plain language description of the nature of a goods item sufficient to identify it for customs, statistical or transport purposes.
    • AAB – [4276] Free form description of the conditions of payment between the parties to a transaction.
    • AAC – [7488] Additional information concerning dangerous substances and/or article in a consignment.
    • AAD – [7254] Proper shipping name, supplemented as necessary with the correct technical name, by which a dangerous substance or article may be correctly identified, or which is sufficiently informative to permit identification by reference to generally available literature.
    • AAE – The content of an acknowledgement.
    • AAF – Specific details applying to rates.
    • AAG – Indicates that the segment contains instructions to be passed on to the identified party.
    • AAI – The text contains general information.
    • AAJ – Additional conditions specific to this order or project.
    • AAK – Information on the price conditions that are expected or given.
    • AAL – Expression of a number in characters as length of ten meters.
    • AAM – Technical or commercial reasons why a piece of equipment may not be re-used after the current transport terminates.
    • AAN – Restrictions in handling depending on the technical characteristics of the piece of equipment or on the nature of the goods.
    • AAO – Error described by a free text.
    • AAP – Free text of the response to a communication.
    • AAQ – A description of the contents of a package.
    • AAR – (4053) Free text of the non Incoterms terms of delivery. For Incoterms, use: 4053.
    • AAS – The remarks printed or to be printed on a bill of lading.
    • AAT – Free text information on an IATA Air Waybill to indicate means by which account is to be settled.
    • AAU – Information pertaining to the invoice covering the consignment.

    Showing 20 of 356 values defined for element 4451 in D06A.

  • 4453 – Code specifying the function of free text.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – The occurrence of this text does not affect message processing.
    • 2 – Text description of a coded data item for which there is no currently available code.
    • 3 – Text must be read before actioning message.
    • 4 – Pass text on to later recipient.
    • 5 – Indicates that the text is to be taken as a header.
    • 6 – Indicates that the text starts a new numbered paragraph.
    • 7 – Indicates that the text is a paragraph.
  • 3453 – Code specifying the language name.
    Type: an, Max Length: 3
  • 4447 – Code specifying the format of free text.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – The associated text is centred in the available space.
    • 2 – The associated text item is aligned flush left in the available space.
    • 3 – The associated text is aligned flush right in the available space.
    • 4 – The associated text is justified in the available space.
    • 5 – The text is to be preceded by one blank line.
    • 6 – The text is to be preceded by two blank lines.
    • 7 – The text is to be preceded by three blank lines.
    • 8 – The text is a continuation of preceding text.
    • 9 – The text is to begin on a new page.
    • 10 – The text is the final section of the preceding text.
    • 11 – The text is to begin a new line.
Group SG1 (Max 1) Required
EQD To identify a unit of equipment. (Max 1) Required
  • C237 – Marks (letters/numbers) identifying equipment.
    • 8260 – To identify equipment.
      Type: an, Max Length: 17
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 317 values defined for element 3055 in D06A.

    • 3207 – Identification of the name of the country or other geographical entity as defined in ISO 3166-1 and UN/ECE Recommendation 3.
      Type: an, Max Length: 3
  • C224 – Code and or name identifying size and type of equipment. Code preferred.
    • 8155 – Code specifying the size and type of equipment.
      Type: an, Max Length: 10
      Valid Codes:
      • 1 – A tank coated with dime.
      • 2 – A tank coated with epoxy.
      • 6 – A tank capable of holding pressurized goods.
      • 7 – A tank capable of keeping goods refrigerated.
      • 9 – A tank made of stainless steel.
      • 10 – A 40 foot refrigerated container that is not actively controlling temperature of the product.
      • 12 – 80 x 120 cm.
      • 13 – 100 x 120 cm.
      • 14 – Non self-propelled vehicle designed for the carriage of cargo so that it can be towed by a motor vehicle.
      • 15 – A 20 foot refrigerated container that is not actively controlling temperature of the product.
      • 16 – Standard pallet exchangeable following international convention.
      • 17 – Non self propelled vehicle without front wheels designed for the carriage of cargo and provided with a kingpin.
      • 18 – A tank container with a length of 20 feet.
      • 19 – A tank container with a length of 30 feet.
      • 20 – A tank container with a length of 40 feet.
      • 21 – A container owned by InterContainer, a European railway subsidiary, with a length of 20 feet.
      • 22 – A container owned by InterContainer, a European railway subsidiary, with a length of 30 feet.
      • 23 – A container owned by InterContainer, a European railway subsidiary, with a length of 40 feet.
      • 24 – A refrigerated tank with a length of 20 feet.
      • 25 – A refrigerated tank with a length of 30 feet.

      Showing 20 of 40 values defined for element 8155 in D06A.

    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 317 values defined for element 3055 in D06A.

    • 8154 – Free form description of the size and type of equipment.
      Type: an, Max Length: 35
  • 8053 – Code qualifying a type of equipment.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • AA – Ground equipment being fuelled or serviced.
    • AB – Chain used in the securing of cargo.
    • AD – Temperature recorder to provide a record of the actual temperature.
    • AE – The part of the vehicle where the cargo is loaded.
    • AG – A cardboard platform used for holding product for storage or transportation.
    • AH – A code to indicate that there is no special equipment needed.
    • AI – A compartment forming part of a transport vessel.
    • AJ – Type of open container used for carrying objects.
    • AK – To indicate that the equipment is an aircraft.
    • AL – A device used for medical purposes.
    • AM – A refrigerated (reefer) container that is actively cooling the product.
    • AN – A pallet with standard dimensions 80*120 centimetres made of synthetic material.
    • AO – A standard pallet with standard dimensions 100*120 centimetres made of synthetic material.
    • AP – Equipment used to store and transport clothing in a hanging position.
    • AQ – Trailer designated for combined road/rail use.
    • AT – Empty rail wagon added to the loaded wagons, when goods are longer than the loaded wagon.
    • BL – A piece of equipment that is normally a piece of wood to fix cargo (e.g. coils) during transport.
    • BPN – A box pallet which cannot be exchanged.
    • BPO – A road vehicle capable of carrying goods which is being carried on another means of transport.
    • BPP – A road vehicle capable of carrying goods with an attached trailer which is being carried on another means of transport.

    Showing 20 of 61 values defined for element 8053 in D06A.

  • 8077 – Code specifying the party that is the supplier of the equipment.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – The transport equipment is supplied by the shipper.
    • 2 – The transport equipment is supplied by the carrier.
    • 3 – The equipment is supplied by the consolidator.
    • 4 – The equipment is supplied by the deconsolidator.
    • 5 – The equipment is supplied by a third party.
    • 6 – The equipment is supplied by the forwarder and is taken from a leasing company.
    • 7 – The equipment is supplied by the forwarder and is taken from a pool established by railway companies.
  • 8249 – Code specifying the status of equipment.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – The equipment is or will be moving across a continent on an intermodal or multimodal basis.
    • 2 – Transport equipment to be exported on a marine vessel.
    • 3 – Transport equipment to be imported on a marine vessel.
    • 4 – Transport equipment arriving on a marine vessel is to remain on board.
    • 5 – Transport equipment is to be shifted from one stowage location on a marine vessel to another on the same vessel.
    • 6 – Transport equipment is to be transferred from one marine vessel to another.
    • 7 – Transport equipment notified to arrive which did not arrive on the means of transport.
    • 8 – Transport equipment not notified to arrive but which did arrive on the means of transport.
    • 9 – Transport equipment is used in domestic service.
    • 10 – Equipment is being transported for positioning purposes.
    • 11 – Equipment is being delivered.
    • 12 – Equipment is being redelivered.
    • 13 – The equipment is for repair.
    • 14 – Transport equipment to be discharged and subsequently reloaded on the same means of transport but in a different stowage location.
  • 8169 – Code indicating whether an object is full or empty.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – Indicates that there is more than a quarter of the volume available.
    • 2 – Indicates that there is more than a half of the volume available.
    • 3 – Indicates that there is more than three quarters of the volume available.
    • 4 – Indicates that the object is empty.
    • 5 – Indicates that the object is full.
    • 6 – Indicates that there is no space available in the object.
    • 7 – Indicates that the equipment is fully loaded, and includes a number LCL (Less Than Container Load) consignments.
    • 8 – Indicates that the container is fully loaded with a single FCL (Full Container Load) consignment.
    • 9 – Container represents part of a consignment declared on a single Customs declaration (i.e. the Customs declaration covers more than one container).
    • 10 – Container represents part of the consignment declared on a single Customs declaration with the remainder being in other containers. Other goods, related to other declarations, are also in the container.
    • 11 – Merchandise within a container/package covered by a single invoice.
    • 12 – Merchandise within a container/package covered by more than one invoice.
    • 13 – A container representing a consignment of goods for one consignee with multiple bill of lading numbers.
DIM To specify dimensions. (Max 1)
  • C211 – Specification of the dimensions of a transportable unit.
    • 6411 – Code specifying the unit of measurement.
      Type: an, Max Length: 8 (Required)
    • 6168 – To specify the value of a length dimension.
      Type: n, Max Length: 15
    • 6140 – To specify the value of a width dimension.
      Type: n, Max Length: 15
    • 6008 – To specify the value of a height dimension.
      Type: n, Max Length: 15
  • 6145 – Code qualifying the type of the dimension.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • 1 – The dimension expressed in a gross value.
    • 2 – The dimension of the goods including the packaging.
    • 3 – The dimension of a pallet excluding the goods.
    • 4 – The dimension of a pallet including the goods.
    • 5 – The dimension in the length that the cargo exceeds the standard length at the front of an equipment.
    • 6 – The dimension in the length that the cargo exceeds the standard length at the back of an equipment.
    • 7 – The dimension in the width that the cargo exceeds the standard width at the right side of an equipment.
    • 8 – The dimension in the width that the cargo exceeds the standard width at the left side of an equipment.
    • 9 – The dimensions that the cargo exceeds the standard dimensions.
    • 10 – The external dimensions of transport equipment.
    • 11 – The internal dimensions of equipment.
    • 12 – Dimensions of the damaged area.
    • 13 – The dimension in the height that the cargo exceeds the standard height at the top of a piece of equipment.
    • 14 – Dimensions (width and height) of the equipment door.
IMD To describe an item in either an industry or free format. (Max 9)
  • C272 – To provide the characteristic of the item being described.
    • 7081 – Code specifying the characteristic of an item.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Product in conformity with specifications.
      • 2 – Description of general product form.
      • 3 – Product without quality control when received.
      • 4 – Description of the finish required/available on the product.
      • 5 – Description of what the end use application of the product will be.
      • 6 – Description of the method of construction.
      • 7 – A drug name specially given in order that it may be freely used without legal restriction.
      • 8 – The characteristic of a product.
      • 9 – Description of a sub-product.
      • 10 – Specifies the direction of the grain of the product.
      • 11 – Item characteristic is described following Customs specifications.
      • 12 – Description of the type and/or process involved in making the product. E.g. in steel, description of the steelmaking process.
      • 13 – The degree of excellence of a thing.
      • 14 – Description of the surface condition (e.g. roughness) of the product.
      • 15 – Description of any heat treatment or annealing required/performed on the product.
      • 16 – A code identifying a size system, comprising a set of sizes.
      • 17 – Description of any special coating required/available on the product.
      • 18 – Description of any chemical surface treatment required/performed on the product.
      • 19 – Description of any mechanical surface treatment required/performed on the product.
      • 20 – Type of transfer capacity.

      Showing 20 of 189 values defined for element 7081 in D06A.

    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 317 values defined for element 3055 in D06A.

  • C273 – Description of an item.
    • 7009 – Code specifying an item.
      Type: an, Max Length: 17
      Valid Codes:
      • 1 – Displayed text is bold.
      • 2 – Displayed text is dimmed.
      • 3 – Displayed text is italicised.
      • 4 – Displayed text is normal.
      • 5 – Displayed text foreground and background colours are reversed.
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 317 values defined for element 3055 in D06A.

    • 7008 – Free form description of an item.
      Type: an, Max Length: 256
    • 7008 – Free form description of an item.
      Type: an, Max Length: 256
    • 3453 – Code specifying the language name.
      Type: an, Max Length: 3
  • 7077 – Code specifying the format of a description.
    Type: an, Max Length: 3
    Valid Codes:
    • A – Long description of an item in free form.
    • B – Description of an item in coded and free form text.
    • C – Description of an item in coded format.
    • D – Price look-up description of a product for point of sale receipts.
    • E – Short description of an item in free form.
    • F – Description of an item in free form text.
    • S – Description of an item in a structured format.
    • X – Description of an item in a coded and free text format.
  • 7383 – Code specifying the surface or layer of an object.
    Type: an, Max Length: 3
    Valid Codes:
    • 1S – The location is side one.
    • 2S – The location is side two.
    • AA – To indicate that the entity being specified is on the surface.
    • AB – To indicate that the entity being specified is off the surface.
    • AC – Specifies that the surface/layer/position being described is the soluble portion.
    • AD – The surface or layer of the product being described is the opposite corners.
    • AE – The surface or layer of the product being described are the corner diagonals.
    • AF – The left-hand side (looking forward) of a ship, boat or aircraft.
    • AG – The right-hand side (looking forward) of a ship, boat or aircraft.
    • AH – Surface of a tooth directed toward the face and opposite the lingual surface.
    • AI – Surface of the tooth relating to the cutting edge of the anterior teeth, incisors or canines.
    • AJ – Surface of the tooth toward the back of the dental arch, or away from the midline.
    • AK – Surface of the tooth pertaining to or around the cheek.
    • AL – Surface of the tooth pertaining to the masticating surfaces of the posterior teeth.
    • AM – Surface of the tooth pertaining to or around the tongue.
    • AN – Surface of the tooth toward the midline of the dental arch.
    • BC – The location is at the back of the cab.
    • BS – The location is both sides.
    • BT – The location is on the bottom.
    • DF – The location is in the dual fuel tank positions.

    Showing 20 of 33 values defined for element 7383 in D06A.

Group SG2 (Max 9)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required
  • C082 – Identification of a transaction party by code.
    • 3039 – Code specifying the identity of a party.
      Type: an, Max Length: 35 (Required)
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 317 values defined for element 3055 in D06A.

  • C058 – Unstructured name and address: one to five lines.
    • 3124 – Free form description of a name and address line.
      Type: an, Max Length: 35 (Required)
    • 3124 – Free form description of a name and address line.
      Type: an, Max Length: 35
    • 3124 – Free form description of a name and address line.
      Type: an, Max Length: 35
    • 3124 – Free form description of a name and address line.
      Type: an, Max Length: 35
    • 3124 – Free form description of a name and address line.
      Type: an, Max Length: 35
  • C080 – Identification of a transaction party by name, one to five lines. Party name may be formatted.
    • 3036 – Name of a party.
      Type: an, Max Length: 35 (Required)
    • 3036 – Name of a party.
      Type: an, Max Length: 35
    • 3036 – Name of a party.
      Type: an, Max Length: 35
    • 3036 – Name of a party.
      Type: an, Max Length: 35
    • 3036 – Name of a party.
      Type: an, Max Length: 35
    • 3045 – Code specifying the representation of a party name.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Name component 1: Family name. Name component 2: Given name or initials. Name component 3: Given name or initials. Name component 4: Maiden name. Name component 5: Title Group of name components transmitted in sequence with name component 1 transmitted first. The maiden name is the family name given at birth of a female. Other names are self-explanatory.
      • 2 – Name component 1: paternal name; name component 2: maternal name; name component 3: given name or initial(s); name component 4: middle name or initial(s); name component 5: name suffix.
      • 3 – Name component 1: Qualification Name component 2: First part of the name Name component 3: Second part of the name.
  • C059 – Street address and/or PO Box number in a structured address: one to four lines.
    • 3042 – To identify a street and number and/or Post Office box number.
      Type: an, Max Length: 35 (Required)
    • 3042 – To identify a street and number and/or Post Office box number.
      Type: an, Max Length: 35
    • 3042 – To identify a street and number and/or Post Office box number.
      Type: an, Max Length: 35
    • 3042 – To identify a street and number and/or Post Office box number.
      Type: an, Max Length: 35
  • C819 –
    • 3229 – To identify a country subdivision, such as state, canton, county, prefecture.
      Type: an, Max Length: 9
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 317 values defined for element 3055 in D06A.

    • 3228 – Name of a country subdivision, such as state, canton, county, prefecture.
      Type: an, Max Length: 70
  • 3035 – Code giving specific meaning to a party.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • AA – Party to be billed in accordance with AAR Accounting rule 11.
    • AB – Third party who arranged the purchase of merchandise on behalf of the actual buyer.
    • AE – Any natural or legal person who makes a declaration to an official body on behalf of another natural or legal person, where legally permitted (CCC).
    • AF – Natural or legal person responsible for the satisfactory performance of a Customs transit operation. Source: CCC.
    • AG – (3196) Party authorized to act on behalf of another party. Synonym: Representative.
    • AH – Agent acting on behalf of the transit principal (CCC).
    • AI – Person who has been chosen for a job.
    • AJ – The party which has issued all mutually agreed codes used in the message.
    • AK – Party to whom acknowledgement should be sent.
    • AL – (3340) Party accepting liability for goods held or moving (e.g. transit) under a Customs authorization and - when applicable - a guarantee.
    • AM – Employee of a company or firm authorized to act on behalf of that company or firm e.g. to make a Customs declaration.
    • AN – Person or company which is authorised by the relevant Customs authority to import goods without payment all taxes or specific taxes at the point of entry into the country.
    • AO – Party account is assigned to.
    • AP – (3336) Party accepting goods, products, services, etc.
    • AQ – Person or company approved by the relevant authority in the country to pack and export specific goods under Customs supervision.
    • AR – Exporter authorized/approved by Customs for special Customs procedures e.g. simplified procedure.
    • AS – Identifies the financial institution servicing the account(s).
    • AT – Importer authorized/approved by Customs for special Customs procedures e.g. simplified procedure.
    • AU – Trader authorized/approved by Customs for special transit procedures e.g. simplified procedure.
    • AV – Party that has delegated the authority to take a certain action on behalf of a company or agency.

    Showing 20 of 558 values defined for element 3035 in D06A.

  • 3164 – Name of a city.
    Type: an, Max Length: 35
  • 3251 – Code specifying the postal zone or address.
    Type: an, Max Length: 17
  • 3207 – Identification of the name of the country or other geographical entity as defined in ISO 3166-1 and UN/ECE Recommendation 3.
    Type: an, Max Length: 3
MOA To specify a monetary amount. (Max 9)
  • C516 – Amount of goods or services stated as a monetary amount in a specified currency.
    • 5025 – Code qualifying the type of monetary amount.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • 1 – First VAT value if, for the same rate of VAT, there are 1 to 3 different ways to set this value.
      • 2 – Second VAT value if, for the same rate of VAT, there are 2 or 3 different ways to set this value.
      • 3 – Third VAT value if, for the same rate of VAT, there are 3 different ways to set this value.
      • 4 – Royalties relating to the imported goods that the buyer must pay, either directly or indirectly, as a condition of sale, to the extent that they are not included in the price actually paid or payable.
      • 5 – The amount specified is the adjusted amount.
      • 6 – The owing amount in the currency used as reference in the transaction.
      • 7 – Charges which parties agreed upon.
      • 8 – Total amount of allowance or charge.
      • 9 – Amount to be paid.
      • 10 – Indicates that the amount is based on the charged currency.
      • 11 – Amount that has been paid.
      • 12 – Amount which was remitted (see remittance advice).
      • 13 – The amount is subject to a total monetary discount.
      • 14 – The amount in the currency in which the amount is paid or has to be paid.
      • 15 – The addition of the balance all accounts divided by the number of accounts.
      • 16 – The fee that a bank charges for releasing monies.
      • 17 – The complete quantity of anything needed for or made in one operation or lot.
      • 18 – Fee charged by a broker for acting on behalf of a third party.
      • 19 – Commission paid by the importer to his/her agent for the service of representing him/her in the purchase.
      • 20 – Value of data contained on the carrier media (e.g. magnetic tape).

      Showing 20 of 532 values defined for element 5025 in D06A.

    • 5004 – To specify a monetary amount.
      Type: n, Max Length: 35
    • 6345 – Code specifying a monetary unit.
      Type: an, Max Length: 3
    • 6343 – Code qualifying the type of currency.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – The currency of the monetary unit involved in the transaction for customs valuation.
      • 2 – The currency of the monetary unit involved in the transaction for insurance purposes.
      • 3 – The currency of the local monetary unit.
      • 4 – The currency of the monetary unit used for calculation in an invoice.
      • 5 – The currency of the monetary unit of an account.
      • 6 – The currency of the monetary unit to be converted from.
      • 7 – The currency of the monetary unit to be converted into.
      • 8 – The currency of the monetary unit used in a price list.
      • 9 – The currency of the monetary unit used in an order.
      • 10 – The currency of the monetary unit used for pricing purposes.
      • 11 – The currency of the monetary unit used for payment.
      • 12 – The currency of the monetary unit used in a quotation.
      • 13 – The currency of the local monetary unit at recipient's location.
      • 14 – The currency of the monetary unit normally used by the supplier.
      • 15 – The currency of the local monetary unit at sender's location.
      • 16 – The currency as per tariff.
      • 17 – The currency in which the charges are calculated.
      • 18 – The currency in which tax amounts are due or have been paid.
    • 4405 – Code specifying a status.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Remark that the requested service in the order remains outstanding.
      • 2 – The instruction has been completed.
      • 3 – The information has been passed on.
      • 4 – The amount has the status of finality.
      • 5 – The amount is subject to finality.
      • 6 – The amount quoted is a minimum tariff.
      • 7 – The amount quoted is a fixed tariff.
      • 8 – The amount quoted is a maximum tariff.
      • 9 – The amount is quoted for information only, it is not part of the charges to be deducted or added.
      • 10 – The amount is available today.
      • 11 – The amount is available on the next banking office day after the booking date.
      • 12 – The amount is available on the second banking office day after the booking date.
      • 13 – The amount available on the third banking office day after the booking date.
      • 14 – Funds not collected by beneficiary.
      • 15 – The amount or quantity is zero.
      • 16 – No status or condition has been advised.
      • 17 – A status or condition has been requested.
      • 18 – No charge is to be made.
      • 19 – The quantity has been the subject of a rounding operation.
      • 20 – Intended to last or function indefinitely.

      Showing 20 of 128 values defined for element 4405 in D06A.

Group SG3 (Max 9)
CTA To identify a person or a department to whom communication should be directed. (Max 1) Required
  • C056 –
    • 3413 – To identify a contact, such as a department or employee.
      Type: an, Max Length: 17
    • 3412 – Name of a contact, such as a department or employee.
      Type: an, Max Length: 35
  • 3139 – Code specifying the function of a contact (e.g. department or person).
    Type: an, Max Length: 3
    Valid Codes:
    • AA – Department/person to contact for matters regarding insurance.
    • AB – Department/person to contact for matters regarding the workshop.
    • AC – Department/person in charge of accepting incoming goods.
    • AD – The contact responsible for accounting matters.
    • AE – Department/person to contact for matters regarding contracts.
    • AF – Department/person to contact for matters regarding land registry.
    • AG – Department/person of the agent which acts on behalf of another party.
    • AH – Department/person to contact for matters regarding technical coordination of works.
    • AI – Department/person to contact for matters regarding project management on behalf of the contractor.
    • AJ – Department/person to contact for matters regarding investments.
    • AK – Department/person to contact for matters regarding management of works on behalf of the owner.
    • AL – Department/person to contact for matters regarding personnel (human resources).
    • AM – Department/person to contact for matters regarding claims.
    • AN – Department/person to contact for laboratory matters.
    • AO – Department/person to contact for matters regarding plant/equipment.
    • AP – Department/person responsible for the accounts payable function within a corporation.
    • AQ – Department/person to contact for matters regarding quantity surveying.
    • AR – Department/person responsible for the accounts receivable within a corporation.
    • AS – Department/person to contact for matters regarding public relations.
    • AT – Department/person to contact for matters regarding technical issues.

    Showing 20 of 97 values defined for element 3139 in D06A.

COM To identify a communication number of a department or a person to whom communication should be directed. (Max 9)
  • C076 – Communication number of a department or employee in a specified channel.
    • 3148 – To identify a communication address.
      Type: an, Max Length: 512 (Required)
    • 3155 – Code specifying the type of communication address.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • AA – A process that, on demand, connects two or more data terminal equipments and permits the exclusive use of a data circuit between them until the connection is released (ISO).
      • AB – Communications number assigned by Societe Internationale de Telecommunications Aeronautiques (SITA).
      • AC – Communications number assigned by Aeronautical Radio Inc.
      • AD – AT&T mailbox identifier.
      • AE – Peripheral device identification.
      • AF – The switched telecommunications network of the United States Department of Defense.
      • AG – The switched telecommunications network of the United States government.
      • AH – Data exchange via the World Wide Web.
      • AI – Identifies that portion of an international telephone number representing the country code to be used when calling internationally.
      • AJ – Identifies the alternate telephone number.
      • AK – Code that identifies the communications number for the online videotex service.
      • AL – Identifies the cellular phone number.
      • AM – The international telephone direct line number.
      • AN – ODETTE File Transfer Protocol.
      • AO – Identification of the Uniform Resource Location (URL) Synonym: World wide web address.
      • AP – VHF radio telephone.
      • AQ – The X.400 address accepting information in the body text of a message.
      • AR – Address capable of receiving messages in accordance with the EDIINT/AS1 protocol for MIME based EDI .
      • AS – Address capable of receiving messages in accordance with the EDIINT/AS2 protocol.
      • AT – Address capable of receiving messages in accordance with the EDIINT/AS3 protocol.

      Showing 20 of 45 values defined for element 3155 in D06A.

Group SG4 (Max 1)
TDT To specify information regarding the transport such as mode of transport, means of transport, its conveyance reference number and the identification of the means of transport. (Max 1) Required
  • C220 – Method of transport code or name. Code preferred.
    • 8067 – Code specifying the name of a mode of transport.
      Type: an, Max Length: 3
    • 8066 – Name of a mode of transport.
      Type: an, Max Length: 17
  • C001 – Code and/or name identifying the type of means of transport.
    • 8179 – Code specifying the means of transport.
      Type: an, Max Length: 8
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 317 values defined for element 3055 in D06A.

    • 8178 – Free form description of the means of transport.
      Type: an, Max Length: 17
  • C040 – Identification of a carrier by code and/or by name. Code preferred.
    • 3127 – To identify a carrier.
      Type: an, Max Length: 17
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 317 values defined for element 3055 in D06A.

    • 3126 – Name of a carrier.
      Type: an, Max Length: 35
  • C401 – To provide details of reason for, and responsibility for, use of transportation other than normally utilized.
    • 8457 – Code specifying the reason for excess transportation.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • A – The reason for the excess transportation is due to special rail car order, schedule increase forecast change.
      • B – The reason for the excess transportation is due to engineering change or late release.
      • C – The reason for the excess transportation is due to special rail car order, schedule increase forecast change specification (schedule) error/overbuilding.
      • D – The reason for the excess transportation is due to shipment tracing delay.
      • E – The reason for the excess transportation is due to plant inventory loss.
      • F – The reason for the excess transportation is due to building ahead of schedule.
      • G – The reason for the excess transportation is due to vendor behind schedule.
      • H – The reason for the excess transportation is due to failure to include costs in last shipment.
      • I – The reason for the excess transportation is due to carrier loss claim.
      • J – The reason for the excess transportation is due to transportation failure.
      • K – The reason for the excess transportation is due to insufficient weight for carload.
      • L – The reason for the excess transportation is due to reject or discrepancy.
      • M – The reason for the excess transportation is due to transportation delay.
      • N – The reason for the excess transportation is due to lack of railcar of railroad equipment.
      • P – The reason for the excess transportation is due to releasing error.
      • R – The reason for the excess transportation is due to record error or cate reported discrepancy report.
      • T – The reason for the excess transportation is due to common or peculiar part schedule increase.
      • U – The reason for the excess transportation is due to alternative supplier shipping for responsible supplier.
      • V – The reason for the excess transportation is due to direct schedule or locally controlled.
      • W – The reason for the excess transportation is due to purchasing waiver approved.

      Showing 20 of 23 values defined for element 8457 in D06A.

    • 8459 – Code specifying the responsibility for excess transportation.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • B – The responsibility for excess transportation is with the material release issuer.
      • S – The responsibility for excess transportation is with the supplier authority.
      • X – The responsibility for the excess transportation is to be determined.
      • ZZZ – A code assigned within a code list to be used on an interim basis and as defined among trading partners until a precise code can be assigned to the code list.
    • 7130 – To identify the authorisation to ship issued by the customer.
      Type: an, Max Length: 17
  • C222 – Code and/or name identifying the means of transport.
    • 8213 – Identifies the name of the transport means.
      Type: an, Max Length: 35
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 317 values defined for element 3055 in D06A.

    • 8212 – Name identifying a means of transport.
      Type: an, Max Length: 70
    • 8453 – Code specifying the nationality of a means of transport.
      Type: an, Max Length: 3
  • 8051 – Code qualifying a specific stage of transport.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • 1 – Transport by which goods are moved from or to the frontier, or between inland points.
    • 2 – Point by which the means of transport are presumed to have left the statistical territory of despatch or to have entered the statistical territory of arrival.
    • 3 – Transport by which goods are moved to the place of arrival.
    • 10 – Transport by which the goods are moved prior to their main carriage transport.
    • 11 – Transport by which goods are moved to the Customs frontier.
    • 12 – Transport by which goods are moved from the place of departure.
    • 13 – Transport by which goods are moved at the place of destination.
    • 15 – The fourth carrier of the ordered transport.
    • 16 – The fifth carrier of the ordered transport.
    • 17 – The sixth carrier of the ordered transport.
    • 18 – The seventh carrier of the ordered transport.
    • 19 – The eighth carrier of the ordered transport.
    • 20 – The primary stage in the movement of cargo from the point of origin to the intended destination.
    • 21 – The first carrier of the ordered transport when more than one carrier is involved.
    • 22 – The second carrier of the ordered transport when more than one carrier is involved.
    • 23 – The third carrier of the ordered transport when more than one carrier is involved.
    • 24 – Transport by which goods are moved via an inland body of water.
    • 25 – Carrier responsible from the point of origin to the final delivery destination.
    • 26 – Second transport by which the goods are moved prior to their main carriage transport.
    • 27 – The transport by which the goods are moved to the place of acceptance.

    Showing 20 of 26 values defined for element 8051 in D06A.

  • 8028 – To identify a journey of a means of transport.
    Type: an, Max Length: 17
  • 8101 – Code specifying the direction of transport.
    Type: an, Max Length: 3
    Valid Codes:
    • BS – The transport from the buyer to the seller.
    • SB – The transport from the seller to the buyer.
    • SC – The transport from the subcontractor to the seller.
    • SD – The transport from the seller to the drop ship designated location.
    • SF – The transport from the seller to the freight forwarder.
    • SS – The transport from the seller to the subcontractor.
    • ST – Cargo is transferred from the main carriage or mother vessel to a lighter.
    • SU – Cargo is transferred from the lighter vessel to a main carriage or mother vessel.
    • ZZZ – A code assigned within a code list to be used on an interim basis and as defined among trading partners until a precise code can be assigned to the code list.
  • 8281 – Code indicating the ownership of a means of transport.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – The owner of the transported goods is also the owner of the means of transport or rented it for this transport.
    • 2 – The owner of the transported goods does not own the means of transport or has not rented it for this transport.
    • 3 – A code indicating privately owned transport.
DTM To specify date, and/or time, or period. (Max 9)

Elements and codes as defined at DTM above.

Group SG5 (Max 9)
LOC To identify a place or a location and/or related locations. (Max 1) Required
  • C517 – Identification of a location by code or name.
    • 3225 – To identify a location.
      Type: an, Max Length: 35
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 317 values defined for element 3055 in D06A.

    • 3224 – Name of the location.
      Type: an, Max Length: 256
  • C519 – Identification the first related location by code or name.
    • 3223 – To identify a first related location.
      Type: an, Max Length: 35
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 317 values defined for element 3055 in D06A.

    • 3222 – Name of first related location.
      Type: an, Max Length: 70
  • C553 – Identification of second related location by code or name.
    • 3233 – To identify a second related location.
      Type: an, Max Length: 35
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 317 values defined for element 3055 in D06A.

    • 3232 – Name of the second related location.
      Type: an, Max Length: 70
  • 3227 – Code identifying the function of a location.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • 1 – (3018) Point or port of departure, shipment or destination, as required under the applicable terms of delivery, e.g. Incoterms.
    • 2 – [3109] To identify the place where the payment has been or should be made.
    • 3 – Place where equipment tare has been or must be checked for official assessment.
    • 4 – Place at which the goods have been received.
    • 5 – (3214) Port, airport or other location from which a means of transport or transport equipment is scheduled to depart or has departed.
    • 6 – A bed in a ward.
    • 7 – (3246) Place to which the goods are to be finally delivered under transport contract terms (operational term).
    • 8 – Port, airport or other location to which a means of transport or transport equipment is destined.
    • 9 – [3334] Seaport, airport, freight terminal, rail station or other place at which the goods (cargo) are loaded on to the means of transport being used for their carriage.
    • 10 – [3348] Place where the goods are taken over by the carrier.
    • 11 – [3392] Seaport, airport, freight terminal, rail station or other place at which goods are unloaded from the means of transport having been used for their carriage.
    • 12 – Port at which the goods are discharged from the vessel used for their transport.
    • 13 – [3424] Place where goods are to be or have been transferred from one means of transport to another during the course of one transport operation.
    • 14 – [3385] To identify the place where a goods item is located.
    • 15 – Place where the responsibility is transferred.
    • 16 – Place where the ownership of the goods is transferred.
    • 17 – Place where goods are transported across a country border.
    • 18 – [3156] Warehouse where a particular consignment is to be or has been stored.
    • 19 – Factory/plant relevant for a particular consignment.
    • 20 – Place where goods will ultimately be delivered.

    Showing 20 of 256 values defined for element 3227 in D06A.

  • 5479 – Code specifying a relation.
    Type: an, Max Length: 3
DTM To specify date, and/or time, or period. (Max 9)

Elements and codes as defined at DTM above.

UNS Unknown Segment (Max 1) Required
Group SG6 (Max 9)
DTM To specify date, and/or time, or period. (Max 1) Required

Elements and codes as defined at DTM above.

LOC To identify a place or a location and/or related locations. (Max 1)

Elements and codes as defined at LOC above.

NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 9)

Elements and codes as defined at NAD above.

Group SG7 (Max 9)
RFF To specify a reference. (Max 1) Required

Elements and codes as defined at RFF above.

DTM To specify date, and/or time, or period. (Max 1)

Elements and codes as defined at DTM above.

NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 9)

Elements and codes as defined at NAD above.

MOA To specify a monetary amount. (Max 1)

Elements and codes as defined at MOA above.

Group SG8 (Max 999)
LIN To identify a line item and configuration. (Max 1) Required
  • C212 – Goods identification for a specified source.
    • 7140 – To identify an item.
      Type: an, Max Length: 35
    • 7143 – Coded identification of an item type.
      Type: an, Max Length: 3
      Valid Codes:
      • AA – Number assigned by manufacturer or seller to identify the release of a product.
      • AB – The item number is that of an assembly.
      • AC – Article identifier used within health sector to indicate data used conforms to HIBC.
      • AD – Number assigned to a cold roll.
      • AE – Number assigned to a hot roll.
      • AF – Number assigned to a slab, which is produced in a particular production step.
      • AG – A number assigned to indicate a revision of software.
      • AH – An 11-digit code that uniquely identifies consumer packaging of a product; does not have a check digit.
      • AI – A 12-digit code that uniquely identifies the consumer packaging of a product, including a check digit.
      • AJ – Number assigned to a sample.
      • AK – Number assigned to a pack containing a stack of items put together (e.g. cold roll sheets (steel product)).
      • AL – A 13-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator.
      • AM – A 14-digit code that uniquely identifies the manufacturer's shipping unit, including the packaging indicator and the check digit.
      • AN – A suffix used in conjunction with a higher level UPC (Universal product code) to define packing variations for a product.
      • AO – A code which specifies the codification of the state's labelling requirements.
      • AP – Number assigned to the heat (also known as the iron charge) for the production of steel products.
      • AQ – A number identifying a coupon.
      • AR – A number to identify a resource.
      • AS – A number to identify a work task.
      • AT – Identification number on a product allowing a quick electronic retrieval of price information for that product.

      Showing 20 of 107 values defined for element 7143 in D06A.

    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 317 values defined for element 3055 in D06A.

  • C829 – To provide an indication that a segment or segment group is used to contain sub-line or sub-line item information and to optionally enable the sub-line to be identified.
    • 1082 – To identify a line item.
      Type: an, Max Length: 6
  • 1082 – To identify a line item.
    Type: an, Max Length: 6
  • 1229 – Code specifying the action to be taken or already taken.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – The information is to be or has been added.
    • 2 – The information is to be or has been deleted.
    • 3 – The information is to be or has been changed.
    • 4 – This line item is not affected by the actual message.
    • 5 – This line item is entirely accepted by the seller.
    • 6 – This line item is accepted but amended by the seller.
    • 7 – This line item is not accepted by the seller.
    • 8 – Code specifying that the message is a schedule only.
    • 9 – Code specifying that amendments are requested/notified.
    • 10 – This line item is not found in the referenced message.
    • 11 – This line is not amended by the buyer.
    • 12 – Code specifying that the line item numbers have changed.
    • 13 – Buyer has deducted amount from payment.
    • 14 – Buyer has a claim against an outstanding invoice.
    • 15 – Factor has been requested to charge back the outstanding item.
    • 16 – Seller agrees to issue a credit note.
    • 17 – New settlement terms have been agreed.
    • 18 – Factor agrees to abide by the outcome of negotiations between seller and buyer.
    • 19 – Seller does not accept validity of dispute.
    • 20 – The reported situation is settled.

    Showing 20 of 114 values defined for element 1229 in D06A.

  • 1222 – To specify a level within a configuration.
    Type: n, Max Length: 2
  • 7083 – Code specifying the configuration operation.
    Type: an, Max Length: 3
    Valid Codes:
    • A – The operation is to add to the configuration.
    • D – The operation is to delete from the configuration.
    • I – The item is a part of the configuration.
DIM To specify dimensions. (Max 1)

Elements and codes as defined at DIM above.

QTY To specify a pertinent quantity. (Max 1)
  • C186 – Quantity information in a transaction, qualified when relevant.
    • 6063 – Code qualifying the type of quantity.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • 1 – Individually separated and distinct quantity.
      • 2 – Quantity relevant for charge.
      • 3 – Quantity accumulated.
      • 4 – Interest for overdrawing the account.
      • 5 – The dosage of active ingredient per unit.
      • 6 – The number of entities that audit accounts.
      • 7 – The number of branch locations being leased by an entity.
      • 8 – Quantity of goods which the customer requires the supplier to have in inventory and which may be inspected by the customer if desired.
      • 9 – The number of branch locations owned by an entity.
      • 10 – The number of judgements registered against an entity.
      • 11 – Part of the whole quantity.
      • 12 – Quantity despatched by the seller.
      • 13 – The number of liens registered against an entity.
      • 14 – The number of animals kept for use or profit.
      • 15 – The number of cheques returned due to insufficient funds.
      • 16 – The number of stolen cheques.
      • 17 – The total quantity of a product on hand at a location. This includes as well units awaiting return to manufacturer, units unavailable due to inspection procedures and undamaged stock available for despatch, resale or use.
      • 18 – Quantity previously referenced.
      • 19 – The number of security shares issued and for which full payment has been made.
      • 20 – Quantity not usable.

      Showing 20 of 465 values defined for element 6063 in D06A.

    • 6060 – Alphanumeric representation of a quantity.
      Type: an, Max Length: 35 (Required)
    • 6411 – Code specifying the unit of measurement.
      Type: an, Max Length: 8
FTX To provide free form or coded text information. (Max 9)

Elements and codes as defined at FTX above.

Group SG9 (Max 1)
DAM To specify damage including action taken. (Max 1) Required
  • C821 – To specify the type of damage to an object.
    • 7501 – Code specifying the type of damage to an object.
      Type: an, Max Length: 3
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 317 values defined for element 3055 in D06A.

    • 7500 – Free form description of the type of damage to an object.
      Type: an, Max Length: 35
  • C822 – To specify where the damage is on an object.
    • 7503 – Code specifying where the damage is on an object.
      Type: an, Max Length: 4
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 317 values defined for element 3055 in D06A.

    • 7502 – Free form description of where the damage is on an object.
      Type: an, Max Length: 35
  • C825 – To specify the severity of damage to an object.
    • 7509 – Code specifying the severity of damage.
      Type: an, Max Length: 3
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 317 values defined for element 3055 in D06A.

    • 7508 – Free form description of the severity of damage.
      Type: an, Max Length: 35
  • C826 – To indicate an action which has been taken or is to be taken (e.g. in relation to a certain object).
    • 1229 – Code specifying the action to be taken or already taken.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – The information is to be or has been added.
      • 2 – The information is to be or has been deleted.
      • 3 – The information is to be or has been changed.
      • 4 – This line item is not affected by the actual message.
      • 5 – This line item is entirely accepted by the seller.
      • 6 – This line item is accepted but amended by the seller.
      • 7 – This line item is not accepted by the seller.
      • 8 – Code specifying that the message is a schedule only.
      • 9 – Code specifying that amendments are requested/notified.
      • 10 – This line item is not found in the referenced message.
      • 11 – This line is not amended by the buyer.
      • 12 – Code specifying that the line item numbers have changed.
      • 13 – Buyer has deducted amount from payment.
      • 14 – Buyer has a claim against an outstanding invoice.
      • 15 – Factor has been requested to charge back the outstanding item.
      • 16 – Seller agrees to issue a credit note.
      • 17 – New settlement terms have been agreed.
      • 18 – Factor agrees to abide by the outcome of negotiations between seller and buyer.
      • 19 – Seller does not accept validity of dispute.
      • 20 – The reported situation is settled.

      Showing 20 of 114 values defined for element 1229 in D06A.

    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 317 values defined for element 3055 in D06A.

    • 1228 – Free form description of the action to be taken or already taken.
      Type: an, Max Length: 35
  • 7493 – Code qualifying the damage details.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • 1 – The damage details relate to equipment, e.g. a container.
COD To provide component details of an object (e.g. product, container) such as its type and the material of which it is composed. (Max 1)
  • C823 – To identify the type of unit/component of an object (e.g. lock, door, tyre).
    • 7505 – Code specifying a type of unit or component.
      Type: an, Max Length: 3
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 317 values defined for element 3055 in D06A.

    • 7504 – Free form description of a type of unit or component.
      Type: an, Max Length: 35
  • C824 – To identify the material of which a component is composed (e.g. steel, plastics).
    • 7507 – Code specifying a component material.
      Type: an, Max Length: 3
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 317 values defined for element 3055 in D06A.

    • 7506 – Free form description of a component material.
      Type: an, Max Length: 35
Group SG10 (Max 9)
RTE To specify rate information. (Max 1) Required
  • C128 – Rate per unit and rate basis.
    • 5419 – Code qualifying the type of rate.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • 1 – Code specifying the allowance rate.
      • 2 – Code specifying the charge rate.
      • 3 – Difference rate of actual price and calculated price.
      • 4 – Labour rate for a normal working day. Synonym: Straight time.
      • 5 – Labour rate for overtime.
      • 6 – Labour rate for premium time.
      • 7 – To identify a rate which is to be applied in a calculation.
      • 8 – The coefficient which is to be used as a multiplier.
      • 9 – To specify the rate of an indemnity.
      • 10 – To specify the rate that has been used to calculate the monetary amount reserved as a guarantee.
      • 11 – To specify the rate of an indemnity for waiting.
    • 5420 – To specify the rate per unit specified in the unit price basis.
      Type: n, Max Length: 15 (Required)
    • 5284 – To specify the basis for a unit price.
      Type: n, Max Length: 9
    • 6411 – Code specifying the unit of measurement.
      Type: an, Max Length: 8
  • 4405 – Code specifying a status.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – Remark that the requested service in the order remains outstanding.
    • 2 – The instruction has been completed.
    • 3 – The information has been passed on.
    • 4 – The amount has the status of finality.
    • 5 – The amount is subject to finality.
    • 6 – The amount quoted is a minimum tariff.
    • 7 – The amount quoted is a fixed tariff.
    • 8 – The amount quoted is a maximum tariff.
    • 9 – The amount is quoted for information only, it is not part of the charges to be deducted or added.
    • 10 – The amount is available today.
    • 11 – The amount is available on the next banking office day after the booking date.
    • 12 – The amount is available on the second banking office day after the booking date.
    • 13 – The amount available on the third banking office day after the booking date.
    • 14 – Funds not collected by beneficiary.
    • 15 – The amount or quantity is zero.
    • 16 – No status or condition has been advised.
    • 17 – A status or condition has been requested.
    • 18 – No charge is to be made.
    • 19 – The quantity has been the subject of a rounding operation.
    • 20 – Intended to last or function indefinitely.

    Showing 20 of 128 values defined for element 4405 in D06A.

QTY To specify a pertinent quantity. (Max 1) Required

Elements and codes as defined at QTY above.

Group SG11 (Max 9)
NAD To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207. (Max 1) Required

Elements and codes as defined at NAD above.

Group SG12 (Max 9) Required
MOA To specify a monetary amount. (Max 1) Required

Elements and codes as defined at MOA above.

TAX To specify relevant duty/tax/fee information. (Max 1)
  • C241 – Code and/or name identifying duty, tax or fee.
    • 5153 – Code specifying a type of duty, tax or fee.
      Type: an, Max Length: 3
      Valid Codes:
      • AAA – A tax levied on the volume of petroleum being transacted.
      • AAB – Countervailing duty paid in cash prior to a formal finding of subsidization by Customs.
      • AAC – Countervailing duty paid by posting a bond during an investigation period prior to a formal decision on subsidization by Customs.
      • AAD – A tax levied on tobacco products.
      • AAE – General fee or tax for the use of energy.
      • AAF – A tax levied specifically on coffee products.
      • AAG – A harmonized sales tax consisting of a goods and service tax, a Canadian provincial sales tax and, as applicable, a Quebec sales tax which is recoverable.
      • AAH – A sales tax charged within the Canadian province of Quebec which is recoverable.
      • AAI – A sales tax charged within Canadian provinces which is non-recoverable.
      • AAJ – A tax levied on a replacement part, where the original part is returned.
      • AAK – Tax that is levied specifically on products containing mineral oil.
      • ADD – Duty applied to goods ruled to have been dumped in an import market at a price lower than that in the exporter's domestic market.
      • BOL – Tax required in Italy, which may be fixed or graduated in various circumstances (e.g. VAT exempt documents or bank receipts).
      • CAP – Levy imposed on agricultural products where there is a difference between the selling price between trading countries.
      • CAR – A tax that is levied on the value of the automobile.
      • COC – Italian Paper consortium tax.
      • CST – Tax related to a specified commodity, e.g. illuminants, salts.
      • CUD – Duties laid down in the Customs tariff, to which goods are liable on entering or leaving the Customs territory (CCC).
      • CVD – A duty on imported goods applied for compensate for subsidies granted to those goods in the exporting country.
      • ENV – Tax assessed for funding or assuring environmental protection or clean-up.

      Showing 20 of 52 values defined for element 5153 in D06A.

    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 317 values defined for element 3055 in D06A.

    • 5152 – Name of a type of duty, tax or fee.
      Type: an, Max Length: 35
  • C533 – Indication of account reference for duties, taxes and/or fees.
    • 5289 – Code specifying a duty or tax or fee account.
      Type: an, Max Length: 6 (Required)
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 317 values defined for element 3055 in D06A.

  • C243 – Rate of duty/tax/fee applicable to commodities or of tax applicable to services.
    • 5279 – Code specifying a rate of a duty or tax or fee.
      Type: an, Max Length: 7
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 317 values defined for element 3055 in D06A.

    • 5278 – Rate of a duty or tax or fee.
      Type: an, Max Length: 17
    • 5273 – Code specifying the basis for a duty or tax or fee rate.
      Type: an, Max Length: 12
      Valid Codes:
      • 1 – (5316) To specify that the applicable rate of duty, tax or fee is based on the Customs value (CCC).
      • 2 – To specify that the applicable rate of duty, tax or fee is based on the weight of the item (CCC).
      • 3 – (6060) To specify that the applicable rate of duty, tax or fee is based on the quantity of the item (CCC).
    • 1131 – Code identifying a user or association maintained code list.
      Type: an, Max Length: 17
    • 3055 – Code specifying the agency responsible for a code list.
      Type: an, Max Length: 3
      Valid Codes:
      • 1 – Customs Co-operation Council (now World Customs Organization).
      • 2 – Generic: see also 140, 141, 142, 162.
      • 3 – The airline industry's international organisation.
      • 4 – International Chamber of Commerce.
      • 5 – International Organization of Standardization.
      • 6 – United Nations Economic Commission for Europe.
      • 7 – EDI project for chemical industry.
      • 8 – Standardised electronic commerce forum for companies with interests in computing, electronics and telecommunications.
      • 9 – GS1 (formerly EAN International), an organisation of GS1 Member Organisations, which manages the GS1 System.
      • 10 – Organization for Data Exchange through Tele-Transmission in Europe (European automotive industry project).
      • 11 – A register of ocean going vessels maintained by Lloyd's of London.
      • 12 – International Union of Railways.
      • 13 – International Civil Aviation Organization.
      • 14 – International Chamber of Shipping.
      • 15 – Reinsurance and Insurance Network.
      • 16 – Identifies the Dun & Bradstreet Corporation, United States.
      • 17 – Society for Worldwide Interbank Financial Telecommunications s.c.
      • 18 – SAD = Single Administrative Document.
      • 19 – Federal Reserve Routing Code.
      • 20 – The container industry's international organisation responsible for the issuance of container-related codes.

      Showing 20 of 317 values defined for element 3055 in D06A.

  • 5283 – Code qualifying the function of a duty or tax or fee.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • 1 – Individual duty, tax or fee charged on a single Customs item line of the goods declaration (CCC).
    • 2 – Total of all duties, taxes and fees charged on a single Customs item line of the goods declaration (CCC).
    • 3 – Total of each duty, tax or fee charged on the goods declaration (CCC).
    • 4 – Total of all duties, taxes and fees charged on the goods declaration (CCC).
    • 5 – Duties laid down in the Customs tariff to which goods are liable on entering or leaving the Customs territory (CCC).
    • 6 – Charge for services rendered.
    • 7 – Contribution levied by an authority.
    • 9 – Code specifying information related to tax.
  • 5286 – To specify the basis on which a duty or tax or fee will be assessed.
    Type: an, Max Length: 15
  • 5305 – Code specifying a duty or tax or fee category.
    Type: an, Max Length: 3
    Valid Codes:
    • A – Code specifying that the rate is based on mixed tax.
    • AA – Tax rate is lower than standard rate.
    • AB – A tax category code indicating the item is tax exempt when the item is bought for future resale.
    • AC – A code to indicate that the Value Added Tax (VAT) amount which is due on the current invoice is to be paid on receipt of a separate VAT payment request.
    • AD – A code to indicate that the Value Added Tax (VAT) amount of a previous invoice is to be paid.
    • B – VAT not to be paid to the issuer of the invoice but directly to relevant tax authority.
    • C – Duty associated with shipment of goods is paid by the supplier; customer receives goods with duty paid.
    • E – Code specifying that taxes are not applicable.
    • G – Code specifying that the item is free export and taxes are not charged.
    • H – Code specifying a higher rate of duty or tax or fee.
    • O – Code specifying that taxes are not applicable to the services.
    • S – Code specifying the standard rate.
    • Z – Code specifying that the goods are at a zero rate.
  • 3446 – To identify a number assigned to a party by a tax authority.
    Type: an, Max Length: 20
  • 1227 – Code specifying a calculation sequence.
    Type: an, Max Length: 3
    Valid Codes:
    • 1 – Code specifying the first step of a calculation.
    • 2 – Code specifying the second step of a calculation.
    • 3 – Code specifying the third step of a calculation.
    • 4 – Code specifying the fourth step of a calculation.
    • 5 – Code specifying the fifth step of a calculation.
    • 6 – Code specifying the sixth step of a calculation.
    • 7 – Code specifying the seventh step of a calculation.
    • 8 – Code specifying the eighth step of a calculation.
    • 9 – Code specifying the ninth step of a calculation.
MEA To specify physical measurements, including dimension tolerances, weights and counts. (Max 1)
  • C502 – Identification of measurement type.
    • 6313 – Code specifying the attribute measured.
      Type: an, Max Length: 3
      Valid Codes:
      • A – The measured consolidated weight.
      • AAA – [6160] Weight of goods including any packaging that normally going with the goods.
      • AAB – [6292] Weight (mass) of goods including packing but excluding the carrier's equipment.
      • AAC – Total weight of goods excluding packaging.
      • AAD – [6012] Total gross weight (mass) of all goods items referred to as one consignment including packaging but excluding any transport equipment.
      • AAE – Gross weight at line item level.
      • AAF – [6048] Weight (mass) if goods without any packaging.
      • AAG – Force exerted by a thruster installed at the stern of a vessel.
      • AAH – Force exerted by a thruster installed at the bow of a vessel.
      • AAI – The hydrate content of an alcoholic product at the moment of bottling.
      • AAJ – The number of units contained on a pallet.
      • AAK – An indication of the fat content of a product.
      • AAL – [6160] Weight (mass) of goods including any packing normally going with them to a buyer in a retail sale.
      • AAM – [6300] The measure of the overall size of a ship determined in accordance with the provisions of the International Convention on Tonnage Measurement of Ships, 1969.
      • AAN – [6302] The measure of the useful capacity of a ship determined in accordance with the provisions of the International Convention on Tonnage Measurement of Ships, 1969.
      • AAO – Degree of moisture.
      • AAP – Electromotive force, or difference of electronic potential between two points.
      • AAQ – Value of energy consumption.
      • AAR – Measurement of the rate of dispersal of heat.
      • AAS – Measurement of the flow of air.

      Showing 20 of 248 values defined for element 6313 in D06A.

    • 6321 – Code specifying the significance of a measurement.
      Type: an, Max Length: 3
      Valid Codes:
      • 3 – The measurement is approximately equal to that specified.
      • 4 – The measurement is equal to that specified.
      • 5 – The measurement is greater than or equal to that specified.
      • 6 – The measurement is greater than that specified.
      • 7 – The measurement is less than that specified.
      • 8 – The measurement is less than or equal to that specified.
      • 9 – Average value for a specific series of readings.
      • 10 – The measurement is not equal to that specified.
      • 12 – The measurement reported is a true value.
      • 13 – The measurement reported is an observed value.
      • 14 – The measurement marked on the object.
      • 15 – The measurement reported is out of range.
  • C174 – Measurement value and relevant minimum and maximum values of the measurement range.
    • 6411 – Code specifying the unit of measurement.
      Type: an, Max Length: 8 (Required)
    • 6314 – To specify the value of a measurement.
      Type: an, Max Length: 18
    • 6162 – To specify the minimum value of a range.
      Type: n, Max Length: 18
    • 6152 – To specify the maximum value of a range.
      Type: n, Max Length: 18
    • 6432 – Count of the number of significant digits.
      Type: n, Max Length: 2
  • 6311 – Code qualifying the purpose of the measurement.
    Type: an, Max Length: 3 (Required)
    Valid Codes:
    • AAA – Line item measurement specified by the Food and Drug Administration.
    • AAB – Specified measurements refer to transport conditions for delivery to a distribution centre.
    • AAC – Size of a retail container in terms of volume.
    • AAD – Measurement to be used by/for other United States government agencies.
    • AAE – [6314] To specify the value of a measurement.
    • AAF – The measurement of a consignment or part for customs purpose.
    • AAG – The measurement of the alcohol content.
    • AAH – The total weight of an identified dimension.
    • AAI – Weight at line item level.
    • AAJ – Measurement reportable for visaed merchandise.
    • AAK – Quantity to be written off from the total license amount.
    • AAL – Total tonnage of cargo loaded onto the conveyance.
    • AAM – Total tonnage of cargo unloaded from the conveyance.
    • AAN – Tonnage of conveyance.
    • AAO – Registered summer dead weight total tonnage of the vessel.
    • AAP – Total weight of containerized cargo on vessel.
    • AAQ – Total weight of non-containerized cargo on vessel.
    • AAR – Primary reportable quantity associated with a tariff number.
    • AAS – Secondary reportable quantity associated with a tariff number.
    • AAT – Third reportable quantity associated with a tariff number.

    Showing 20 of 101 values defined for element 6311 in D06A.

  • 7383 – Code specifying the surface or layer of an object.
    Type: an, Max Length: 3
    Valid Codes:
    • 1S – The location is side one.
    • 2S – The location is side two.
    • AA – To indicate that the entity being specified is on the surface.
    • AB – To indicate that the entity being specified is off the surface.
    • AC – Specifies that the surface/layer/position being described is the soluble portion.
    • AD – The surface or layer of the product being described is the opposite corners.
    • AE – The surface or layer of the product being described are the corner diagonals.
    • AF – The left-hand side (looking forward) of a ship, boat or aircraft.
    • AG – The right-hand side (looking forward) of a ship, boat or aircraft.
    • AH – Surface of a tooth directed toward the face and opposite the lingual surface.
    • AI – Surface of the tooth relating to the cutting edge of the anterior teeth, incisors or canines.
    • AJ – Surface of the tooth toward the back of the dental arch, or away from the midline.
    • AK – Surface of the tooth pertaining to or around the cheek.
    • AL – Surface of the tooth pertaining to the masticating surfaces of the posterior teeth.
    • AM – Surface of the tooth pertaining to or around the tongue.
    • AN – Surface of the tooth toward the midline of the dental arch.
    • BC – The location is at the back of the cab.
    • BS – The location is both sides.
    • BT – The location is on the bottom.
    • DF – The location is in the dual fuel tank positions.

    Showing 20 of 33 values defined for element 7383 in D06A.

CNT To provide control total. (Max 9)
  • C270 – Control total for checking integrity of a message or part of a message.
    • 6069 – Code qualifying the type of control of hash total.
      Type: an, Max Length: 3 (Required)
      Valid Codes:
      • 1 – Algebraic total of the quantity values in line items in a message.
      • 2 – Total number of line items in the message.
      • 3 – Total number of line and sub items in the message.
      • 4 – Number of lines on an invoice.
      • 5 – Total number of occurrences of the Customs item detail section within a single Customs declaration message.
      • 6 – Number of entries which are subject to the same Customs procedures, and have the same tariff or statistical heading, country and duty regime.
      • 7 – Code to indicate total gross weight of a consignment.
      • 8 – Total number of pieces.
      • 9 – The total number of Unit Load Devices mentioned in the message.
      • 10 – The total number of consignments.
      • 11 – [7370] Count of total number of packages referred to as one consignment.
      • 12 – [5214] Amount, debited by the seller and being the total of related article item amounts in a commercial invoice.
      • 13 – [1166] The number of loading lists, manifests or similar documents.
      • 14 – Commercial detail section within a single Customs declaration message.
      • 15 – The total cube of consignment.
      • 16 – (8046) Total number of equipment mentioned in the message.
      • 17 – [5070] Total value declared for Customs purposes of all goods in a consignment, whether or not they are subject to the same Customs procedure, or have the same tariff/statistical heading, country information, and duty regime.
      • 18 – Total reported quantity in net weight.
      • 19 – Total reported quantity in supplementary units.
      • 20 – Hash total of the total monetary amounts reported on the invoices.

      Showing 20 of 58 values defined for element 6069 in D06A.

    • 6066 – To specify the value of a control quantity.
      Type: n, Max Length: 18 (Required)
    • 6411 – Code specifying the unit of measurement.
      Type: an, Max Length: 8
UNT Unknown Segment (Max 1) Required

Sources and further reading